Modcursor problem with 10g

We just recently upgraded from 9i to 10g. We were using the modcursor PJC to control the cursor appearance without any problems before the upgrade.
After we upgraded, the forms began having problems repainting. There is no problem at first, but the problem develops shortly after navigating throught a few forms. It looks like there is a video memory issue. I am guessing that modcursor is eating up memory, and then the forms begin having problems repainting. Removing the modcursor PJC fixes the problem.
Has anyone else experienced this, and is there a solution?
Thanks in advance.

There seems to be something going wrong with this PJC under some circumstances. It was never meant as anything else than a demo so we don't support it. I am afraid the only solution is to stop using it or write your own I guess.

Similar Messages

Developer 2000 ver 5 connecting problem with 10g

Is it possible to work developer 2000 ver 5 with 10g database? When I connected in Form Designer it worked after a long time But when in runtime both form and report gives network error. So, Please give a solution for developer 5 to work with oracle 10g.
Thanks & regards.
Jamil

Hi,
We use forms 6 and had the same problem and at this time upgrade to a new version is not possible; so we found two ways to handle this (Note we have form 6 to this may not work for you):
a) Compile your forms using a database 8 or 8i, and the fmx should be able to connect to a 10g database. this means a daily backup from to 10g to 8i or at least make sure you have the same db structure.
b) Perform a partial forms upgrade of procedure builder:
from the help menu on forms open "About form builder" and check the version of installed products.
Download forms 6i and upgrade only "Procedure builder" with this:
Oracle Procedure Builder V6.0.8.21.0 Build #1459 - Production
option b has been working for us, we are able to connect to a 10g database without problems.
Of course, this is a work-around, not supported by Oracle or anyone for that matter, so make sure you test it in a couple of machines before using in a production envrionment.
Regards,
Hugo.

Connection problem with 10g

Hi Friend's,
I am useing from6i and trying to connect it with 10g database but it is not connecting to server .
but when i am connecting it to 9i server it connect with it.
what is the problem plz give me the solution.
Praveen

only the latest versions of Oracle Forms 6i run against 10g DB's without problems.
patchset 17 and 18 of Forms 6i can be found in the metalink.oracle.com

Ports problems with 10g XE

Hello!
I'm using Oracle 10g XE on Windows Server 2003, the installation was successfully realized.
The problem is that I can't access to the login page : http://127.0.0.1:8080/apex . I think that the problem come from a port restriction (but I'm not sure!) : the 8080 port is certainely blocked, but I don't know how open it ...
With Windows XP Pro, I had no problem ... ! Nevertheless I used the same anti-virus program with the same rules ... !
Can someone help me please, I'm loosing my hair !!
Thanks !

Hello!
I'm using Oracle 10g XE on Windows Server 2003, the installation was successfully realized.
The problem is that I can't access to the login page : http://127.0.0.1:8080/apex . I think that the problem come from a port restriction (but I'm not sure!) : the 8080 port is certainely blocked, but I don't know how open it ...
With Windows XP Pro, I had no problem ... ! Nevertheless I used the same anti-virus program with the same rules ... !
Can someone help me please, I'm loosing my hair !!
Thanks !

Problem with 10g and 9i in one machine

Hello,
I installed 10g in a pc where 9i is already installed. It was installed in its own home directory. My problem is that when I try to access it using Enterprise Manager, or Sql*Plus, or Developer, I get either the service name could not be resolved, or cannot allocate a dedicated server. The service is up and running.
The curious thing is that I can access it with the command from a command window:
sqlplus
'scott/tiger@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=CAC403JN.EBOT.CA)(PO
RT=1521)))(CONNECT_DATA=(ORACLE_SID=ANEC)))'
Both the 9i and 10g have the same HOST and PORT but different SID.
How do I fix my configuration so I can access 10g using the using tools?
Help.
Thanks,
gk

If you are using local naming (tnsnames.ora file) and you have multiple Oracle Homes, one of two things has to happen
1) Every TNS entry has to be duplicated in each tnsnames.ora file.
2) You need to create a TNS_ADMIN environment variables that points at the location of the single tnsnames.ora file that all applications should use.
My personal preference is to go with option 2.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Problem with 10G R2 installation (OUI - 10133 Invalid Staging Area) on W2K3

I'm getting a strange error installing 10G R2 Database on a Windows 2003 server. I get "OUI - 10133 Invalid Staging Area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area." This happens when I choose an Advanced installation or when I choose a starter database.
The funny thing is that I've performed this installation with this exact installation disk on a virtual server on my laptop with Windows 2003.
Also, I ran a quick test with the 10G R1 installation files and I don't get the error. I want to run tests on case insensitivity with LIKE searches (a new feature enabled in 10G R2) so I can't use 10G R1.

I have seen that problem frequently and it is because for some reason the installer doesn't like burned CD's. Copy all the staging files over to disk. I usually download the zip files onto a staging drive on the server, unzip, install, then delete the install files when I'm done if I need the space.
This has two major benefits: I don't run into the "staging area" error and the install only takes about 30 minutes compared to about 3 hours when installing from CD.

Strange problem with 10G using client installed enterprise manager console

I have successfully installed 10G on our SUSE linux 9.0 server, I have created 6 databases (standard edition of the database) and verified their parameter files, control files, and database files are in different locations --- all done at the server console. I created my DBA account on all 6 databases and logged into each one to verify their function.
I returned to my PC where I have installed the 10G client and where I have used the 8 and 9 enterprise manager console to manage my databases. I got the TNSNAMES file in order for the new databases. I logged into the first database and tested my workstation connectivity successfully , I logged into the second database and it said my password was incorrect. I ended up signing in on the second database with my first databases account password. (it then worked). I got fed up hopping around with the mystery with the password being stored somewhere in the enterprise manager java ? and logged in as system and changed all of my passwords. I then went up to the console and found that the only database that they changed on was the first one.
I returned to my workstation and started creating the data files and users and roles in the first database. I now on either workstation in my office, when logging in as ANY of the six database DBA accounts, can see all the objects I created in the first database.
I went to the server console and logged in and verified that the objects only exist in the first database. For some reason the enerprise manager console is really a problem. I have windows XP. Our database is on 10G but we are not taking advantage of grid control due to budget reasons (one server only).
I have heard there is a url based web management console at: http://serverip:5500/em, but it is not working currently in our environment and it will be up to our sys. engineers to release / open up that port through our DMZ. Ordinarily would this allow the kind of control that the old enterprise manager console would?
Is my installing the grid conrol product going to be "overkill" and not useful for me or should I install it?
Is there an alternative 10G version of the enterprise manager console for simpler environments like mine?
Is there a good explanation why my workstations are presenting "false" cached information above what is really in the database for objects unique to each database - ie: why are my #1 database objects showing up in EMC as objects in all databases and why is EMC managing/storing my passwords.?
I just need to get the best choice to manage my environment.
I know I have asked a lot of questions and I would appreciate any insight from someone who has encountered this before.

fixed
- the alias in the TNSNAMES was correct but the actual database "service_name" was the first db - -- a long project / late night oversight. I also went into the sysman\ifiles\ and corrected the entry for the database there too where it had registered the settings for the wrong database.

Problem with 10g agent

I installed 10g agent on server with 9i database. When agent just started then in Enterprise Manager Grid Control I saw database status (it's up) and some database statistics. It's OK. But after some time about 10 minutes I have got an email with message: Failed to connect to database instance: ORA-12538: TNS:no such protocol adapter (DBD ERROR: OCIServerAttach).
And status of my database in Grid control is changed to down. If I restart agent the situation is repeated.
Why is it happens?
Also I set windows environment (ORACLE_SID, ORACLE_HOME, TNS_ADMIN) to correct path and values.

Hi
I am also facing the same issue but in a different flavor. Installed 10g on my Win2K and EM was working fine. Could create a dummy table and execute statements using iSQLPLUS. Later installed Oracle 9iDS on a different home. From then on EM isn't working. I get TNS-12538: no such protocol error. Verified the ORACLE_HOME registry and was pointing to 10g path.
Were you able to solve your issue? Can you pl. suggest your solution? I found similar issue elsewhere
http://ora-12538.ora-code.com/msg/36848.html
Thanks

Problem with 10g on W2003 Server

Hey,
im trying to install oracle 10g on my W2003 Server Machine. At the "Configuration Assistance" i get this error when he tries to execute "Oracle Net Configuration Assistant"
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = G:\oracle\product\10.2.0\db_1\jdk\jre\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=G:\oracle\product\10.2.0\db_1\bin -classpath ";G:\oracle\product\10.2.0\db_1\jdk\jre\lib\rt.jar;G:\oracle\product\10.2.0\db_1\jlib\ldapjclnt10.jar;G:\oracle\product\10.2.0\db_1\jlib\ewt3.jar;G:\oracle\product\10.2.0\db_1\jlib\ewtcompat-3_3_15.jar;G:\oracle\product\10.2.0\db_1\network\jlib\NetCA.jar;G:\oracle\product\10.2.0\db_1\network\jlib\netcam.jar;G:\oracle\product\10.2.0\db_1\jlib\netcfg.jar;G:\oracle\product\10.2.0\db_1\jlib\help4.jar;G:\oracle\product\10.2.0\db_1\jlib\jewt4.jar;G:\oracle\product\10.2.0\db_1\jlib\oracle_ice.jar;G:\oracle\product\10.2.0\db_1\jlib\share.jar;G:\oracle\product\10.2.0\db_1\jlib\swingall-1_1_1.jar;G:\oracle\product\10.2.0\db_1\jdk\jre\lib\i18n.jar;G:\oracle\product\10.2.0\db_1\jlib\srvmhas.jar;G:\oracle\product\10.2.0\db_1\jlib\srvm.jar;G:\oracle\product\10.2.0\db_1\oui\jlib\OraInstaller.jar;G:\oracle\product\10.2.0\db_1\lib\xmlparserv2.jar;G:\oracle\product\10.2.0\db_1\network\tools" oracle.net.ca.NetCA /orahome G:\oracle\product\10.2.0\db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile G:\oracle\product\10.2.0\db_1\network\install\netca_typ.rsp
UnsatisfiedLinkError exception loading native library: oranjni10
Does somebody know why i get this or is able to help ?
Any help would be much appreciated...thanks,
oliver

Check with your web server. This is not a CR issue. If Cr can't get the xml file we can't read it.

I had problem with 10g dataase

Hello,
I installed Oracle database 10g on my laptop. Then I started SQLPLUS. It is asking for user/paswword/host-string.
I gave the hoststring but I could not log in.
Can someone explain in details what should I do ?
Please send reply to [email protected]
Thanks.
S. Sarkar

Hi
what type of error message it gives.?
if u installled oracle 10g server on laptop then
give username and pass without hoststring
system/*****
or scott/tiger
Thanks and Regards
Kuljeet Pal Singh

Performace problem with 10g forms

We have just migrated from 6i forms to 10g forms. The application takes a lot of time to load each form. In the status bar I can see the it is trying to open each gif file of the forms menu.
one question, if I have created a jar of all the gifs, where will the applet pick it up from. Right now I have a jar that is put in /forms/java as well as a virtual directory pointitn to a path on my hp-ux server which has all the gifs and it seems like the applet picks it up from the virtual directory path.
Navigating through a hierarchical tree is also much slower.
Have i missed out something?

Hello,
REP-56107: Invalid environment id {0} for Job Type {1} in the command lineCause:
The envid specified for the job is not defined in the server configuration file.
Action:
Specify an envid that is already defined in the server configuration file or define a new envid in the server configuration file and restart the Server.
It seems that the parameter envid is used in the reports request and this environment is not defined in the reports server configuration file :
For more details :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_cla.htm#sthref2786
Regards

Patching problem with 10g 10.1.0.2 and linux

I patched the next to last patch set:
ORACLE HOME LOCATION
OraDb10g_home1 /u01/app/oracle/product/10.1.0/db_1
Installed Patch List:
=====================
1) Patch 4003051 applied on Wed Feb 16 20:20:36 CET 2005
[ Base Bug(s): 3432729 3889519 4057731 4048145 4003051 3811942 3890744 3828166 ]
But when I'm trying to patch the last patchset afterwards, I get an error:
Result:
BUG_CONFLICT
(no need to check for file conflicts)
Bug ID: null
PATCH_ID=4003051
MISSING_COMPONENT : oracle.rdbms, ver. 10.1.0.3.0
../../../OPatch/opatch.pl version: 1.0.0.0.47
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
This Oracle Home does not have components/versions required by the patch.
ERROR: OPatch failed during pre-reqs check.
What do I have to do? To rollback 4003051 and just apply 4003062 did not work, too.

Hi,
if you can, please contact customer support. I don't have Ubuntu, nor do I have thi sold JDeveloper release.
Frank

Problems with AS 10g and OID

Hello everyone,
we got problems with starting OC4J_bi_forms component in AS control.
database: 10g R2 (10.2.0.1)
forms and reports: 10g (10.1.2.0.2.)
designer: 10g (10.1.2.0.2.)
1. we tried to start component in AS control but we get this error:
The following components were not started:
OC4J : home - time out while waiting for a managed process to start
OC4J : OC4J_BI_Forms - time out while waiting for a managed process to start
OC4J : OC4J_Portal - time out while waiting for a managed process to start
For more information, look at the logs using the related link below.
Related Link Error Logs
2. then we check the error file that describes problems with OID:
Error displaying Log Files page. Failed to initialize configuration management user session.. The OracleAS Repository API threw an exception when obtaining the connect string to the Metadata Repository
Resolution:
Check the exception thrown by the Repository API for resolution information.
Some common causes of this problem are as follows:
OID is not running or unavailable
the ias.properties file is misconfigured with incorrect OID connection information
OID permissions are incorrectly defined
Base Exception:
oracle.ias.repository.schema.SchemaException
Unable to establish connection to the Oracle Internet Directory Server ldap://server_xy:389/. Base Exception : javax.naming.CommunicationException: server_xy:389 [Root exception is java.net.ConnectException: Connection refused: connect]. Unable to establish connection to the Oracle Internet Directory Server ldap://server_xy:389/. Base Exception : javax.naming.CommunicationException: server_xy:389 [Root exception is java.net.ConnectException: Connection refused: connect]
3. we check the status with opmnctl status, all components are down
4. then we tried to start components manually with opmnctl stopall/startall
but the problem isn't solved.
Any help?

hello Jacco,
thank you very much for your help, we are now able to start oc4j_bi_forms.
We follow your advice, at the end we had to change ODS password with oidpasswd to ias_admin password.
Now all components are started.
We now must solve only one problem:
All AS components are started, but when in Application Server Control we click link for
J2EE Applications we get this error:
An error was encountered while loading page. Failed to initialize configuration management user session.. The OracleAS Repository API threw an exception when obtaining the connect string to the Metadata Repository
Resolution:
Check the exception thrown by the Repository API for resolution information.
Some common causes of this problem are as follows:
OID is not running or unavailable
the ias.properties file is misconfigured with incorrect OID connection information
OID permissions are incorrectly defined
Base Exception:
oracle.ias.repository.schema.SchemaException
Unable to establish connection to the Oracle Internet Directory Server ldap://server_xy:389/. Base Exception : javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]. Unable to establish connection to the Oracle Internet Directory Server ldap://server_xy:389/. Base Exception : javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]
Thanks for your help one more time.

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

Modcursor problem with 10g

Similar Messages

Maybe you are looking for