Modifications to allow 500 concurrents users in the Portal

Hello to all,
My name is Juan and is the first time that I write in this Forum. I hope that you can help me.
We have installed a EP 6.20 with package 33 in four machines with a BD, TREX and 2 Application Nodes (ecah one in an independent machine).
We have the Application Nodes with Load Balancing but in this moment, the Portal can only work with 250 concurrents users aprox. And we want allow 500 concurrents but the documentation,that we have found, are more diffused and different between it.
Are any there documentation that indicate the actions to make it?
Kind regards
Juan

Hi Juan,
perhaps the SDN Platform Team could give some tips. SDN has 250.000 Users in total and about 2.500 parallel users.
Regards
Gregor

Similar Messages

Diminishes timeout of the inactive user in the portal

Hi
Please, which parameter that diminishes timeout of the inactive user in the portal to netweaver 7.0?

Hi Saurabh,
you can do this by modifing the headerIview.jsp by using session variables.
when a user logs into portal you have to keep his details in a session and check them everytime when he tries to login again.if it is not the first time then throw and error message
you need to change the par file. code will be something like this
session.setAttribute("user",request.getUser());
if(session.getAttribute("user")!=null)
And for preventing from backend -
By changing the parameter - login/disable_multi_gui_login you can do this.
Check below sap link - http://help.sap.com/saphelp_erp2004/helpdata/en/22/41c43ac23cef2fe10000000a114084/frameset.htm
Regards,
Sen
Edited by: prodyut kumar sen on Dec 20, 2010 1:22 PM

Approving newly registered users of the portal

Hi all,
I am working on a requirement where new registrations of the users to the portal should go through an approval process.A new user clicks the "register" link on the initial portal screen and fills up in information and submits the form, to send the registration request to the user admin who will either approve or reject the request.
I came to know there is a standard feature which has to be enabled to do this.
Could some one guide me in doing this??
Regards,
Narahari

Thanks for the response.
I tried the option that you have sent. I have configured the following parameters to enable this feature :-
i ume.logon.selfreg=TRUE
ii ume.admin.selfreg_company=TRUE
and also to enable companies, I have configured the following property in the UM Configuration :-
iii ume.tpd.companies=1 (One company and guest users).
But still i dont receive any new user requests in the user admin screen.
If some one can help me in this, it will be great.
Regards,
Narahari

Using Powershell to delete all users from the Portal

Summary
This script will delete all users from the Portal except for Administrator and the Built-In Sync account.
Based on Markus's "Delete a User" script.
Useful when developing your system if you want to quickly clear out the data and start again.
set-variable -name URI -value "http://localhost:5725/resourcemanagementservice' " -option constant
function DeleteObject
PARAM($objectType, $objectId)
END
$importObject = New-Object Microsoft.ResourceManagement.Automation.ObjectModel.ImportObject
$importObject.ObjectType = $objectType
$importObject.TargetObjectIdentifier = $objectId
$importObject.SourceObjectIdentifier = $objectId
$importObject.State = 2
$importObject | Import-FIMConfig -uri $URI
if(@(get-pssnapin | where-object {$_.Name -eq "FIMAutomation"} ).count -eq 0) {add-pssnapin FIMAutomation}
$allobjects = export-fimconfig -uri $URI `
–onlyBaseResources `
-customconfig "/Person"
$allobjects | Foreach-Object {
$displayName = $_.ResourceManagementObject.ResourceManagementAttributes | `
Where-Object {$_.AttributeName -eq "DisplayName"}
if([string]::Compare($displayName.Value, "Administrator", $True) -eq 0)
{write-host "Administrator NOT deleted"}
elseif([string]::Compare($displayName.Value, "Built-in Synchronization Account", $True) -eq 0)
{write-host "Built-in Synchronization Account NOT deleted"}
else {
$objectId = (($_.ResourceManagementObject.ObjectIdentifier).split(":"))[2]
DeleteObject -objectType "Person" `
-objectId $objectId
write-host "`nObject deleted`n" $displayName.Value }
Go to the FIM ScriptBox
http://www.wapshere.com/missmiis

The DeleteObject function opens and closes a connection for each object. This approach is faster:
http://social.technet.microsoft.com/wiki/contents/articles/23570.how-to-use-powershell-to-delete-fim-users-that-have-a-null-attribute-name.aspx
Mike Crowley | MVP
My Blog --
Planet Technologies

How to view the Users in the Portal Activity Report

Hello,
Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
Please explain me in detail how to view the Report.
Thnx in Advance
cheers,
Murali

hi,
You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
Do see the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Weblog :Portal SP9: Portal Activity Report
Regards,
Ganesh N

How to track the existing logged user on the portal

Hi
I am using portal 3.0.9.8.1.
From time to time , I am stopping the Oracle http server for the
purpose of deploying new servlet class/jar files in its
configuration files.
My question is "How to define/track the list of users who are
currently accessing the portal"?
In my portal configuration, I setup up the life cycle of new
session id for 15 minutes so it is assumed that I should get
only the list of active users (< 15 minutes) !!!
thanks in advance

Hi
First of all, thanks for your reply.
I issue a simple SQL Statement as follows :
select count(*) from wwlog_activity_logs;
It generates for me around 1300 rows!!!! Is it normal?
Currently, the portal is used only for intranet purposes and the
number of users is only 5?
How the portal is updating this table? is is a historic table?
Can I delete the content of this table at any time?
Thanks in advance for your feeback

How to view a BI query with anonymous user in the portal

<b>Hi Gurus,</b>
Does anybody knows how to view a BI query in the portal with anonymous user?
Cause when i try to view a query the portal always ask for authentification. And i don't want to sign with a user cause my portal is for everybody and if the user logged in it shows the roles that previously were assigned.
I have the Netweaver 2004 with SP9
<b>Thank you Very Much</b>

do you have sso configured between portal and BW server, if yes the authentication pop up should not come.
if you dont want to do sso between portal and bw server and still want to logon to BW query with anonymous user,
in you bw server go to transaction sicf and navigate to DEFAULT_HOST->SAP->BW->BEX and double click on bex node in the resulting window, log on details section provide a default userid/password
Raja

How to retrieve all users in the portal with UME API

Hi everybody,
I would like to know how to retrieve all the users from a portal, which uses LDAP as a source (there are users created in the portal as well)
My code snippet is :
IUserFactory userFactory = UMFactory.getUserFactory();
UserSearchFilter searchFilter = userFactory.getUserSearchFilter();
searchFilter.setDisplayName("*", ISearchAttribute.LIKE_OPERATOR, false);
ISearchResult searchResult = userFactory.searchUsers(searchFilter);
My problem is that with the code above, only the users created in the portal are displayed, and no LDAP users.
Does someone know how to retrieve all the users whatever is the source?
Regards
Renaud

prakash's code should work.
however, mine code below doesn't user a search filter. it retrieves everyuser including users like indexadmin etc. Note:
result.next().toString();
returns a weird uniqueID used in the portal world.
getUniqueName()
gives your the usernames (sAMAccountName in Microsoft AD) people use to logon to the portal.
try {
IUserFactory uf = UMFactory.getUserFactory();
ISearchResult result = uf.getUniqueIDs();
while (result.hasNext()) {
    String uniqueid = result.next().toString();
    IUser user = uf.getUser(uniqueid);
    String userid = user.getUniqueName();
} catch(Exception e) {
//systemout

What are the steps necessary to allow a single user login the ability to execute a single stored procedure and nothing else.

Hello,
I have a request to create a user login and restrict that user to only be able to execute a single stored procedure.
Is this possible using only TSQL commands?
Am i on the right track here?
USE MyDatabase
GO
CREATE LOGIN [mylogin] DEFAULT_DATABASE = [MyDatabase], CHECK_POLICY = OFF, CHECK_EXPIRATION = OFF
GO
CREATE ROLE exec_single_proc_role
GO
exec sp_addrolemember 'exec_single_proc_role', 'mylogin'
GO
CREATE SCHEMA [restricted] AUTHORIZATION mylogin
GO
GRANT EXECUTE ON SCHEMA::restricted TO exec_single_proc_role
GO

Thanks for the reply.
This particular user should need to be able to Alter, Execute, and View the stored procedure as well.
Here is what i ended up with: Any improvement are appreciated. Thanks
USE MyDatabase
GO
--DROP SCHEMA
IF EXISTS (SELECT * FROM sys.schemas WHERE name = N'restricted')
DROP SCHEMA [restricted]
GO
--DROP SERVER WIDE LOGIN
IF EXISTS (SELECT * FROM sys.server_principals WHERE name = N'MyUserLogin')
DROP LOGIN [MyUserLogin]
GO
--CREATE SERVER WIDE LOGIN
CREATE LOGIN [MyUserLogin] WITH PASSWORD = 0x0100F1CF6792E602EF40DFF55983FDE81A9 HASHED, SID = 0xC33B04EECE59DC4C95BE66ED9B15D13D, DEFAULT_DATABASE = [MyDatabase], CHECK_POLICY = OFF, CHECK_EXPIRATION = OFF
GO
--DROP ROLE
DECLARE @RoleName sysname
set @RoleName = N'exec_single_proc_role'
IF EXISTS (SELECT * FROM sys.database_principals WHERE name = @RoleName AND type = 'R')
Begin
DECLARE @RoleMemberName sysname
DECLARE Member_Cursor CURSOR FOR
select [name]
from sys.database_principals
where principal_id in (
select member_principal_id
from sys.database_role_members
where role_principal_id in (
select principal_id
FROM sys.database_principals where [name] = @RoleName AND type = 'R' ))
OPEN Member_Cursor;
FETCH NEXT FROM Member_Cursor
into @RoleMemberName
WHILE @@FETCH_STATUS = 0
BEGIN
exec sp_droprolemember @rolename=@RoleName, @membername= @RoleMemberName
FETCH NEXT FROM Member_Cursor
into @RoleMemberName
END;
CLOSE Member_Cursor;
DEALLOCATE Member_Cursor;
End
IF EXISTS (SELECT * FROM sys.database_principals WHERE name = N'exec_single_proc_role' AND type = 'R')
DROP ROLE [exec_single_proc_role]
GO
--DROP USER
IF EXISTS (SELECT * FROM sys.database_principals WHERE name = N'MyUserLogin')
DROP USER [MyUserLogin]
GO
--CREATE USER AND ASSIGN DEFAULT SCHEMA
CREATE USER [MyUserLogin] FOR LOGIN [MyUserLogin] WITH DEFAULT_SCHEMA=[restricted]
GO
--CREATE SCHEMA
CREATE SCHEMA [restricted] AUTHORIZATION [MyUserLogin]
GO
--CREATE ROLE
CREATE ROLE [exec_single_proc_role] AUTHORIZATION [MyUserLogin]
GO
--ADD ROLE
EXEC sp_addrolemember 'exec_single_proc_role', [MyUserLogin]
GO
GRANT EXECUTE ON SCHEMA::[restricted] TO [exec_single_proc_role]
GO
GRANT EXECUTE ON OBJECT::[dbo].[MyStoredProcedure] TO [MyUserLogin]
GO

How to see the logged in user on the portal EP6 SP2

Hi All,
I am using EP6.0 SP2 Patch 5.I want to know that which users are logged on.Can I see the user id of the logged in user inthe portal.
Any suggestions.
Paritosh

Hi Paritosh,
I think SAP Note 762004 should answer your question!
Best regards,
Robert

How to change the portal role presentation based on users BW authorization?

Hello,
I have created 3 BW Roles, each one contains an iView with a certain report.
For simplicity let's name the Roles A,B,C and assume that in order to see the proper report the user needs to be assigned to the matching group (A,B,C) at the BW side.
I have imported these 3 roles to the portal as worksets, created new pcd role, placed these 3 worksets inside the new role and assigned this role to a certain group of users in the portal (these users are ABAP users so they are the same at the BW side as well).
What I would like to do is this: I would like that each user that I have assigned this new role to will see only the worksets that he/she allowed to see based on it's BW authorization. Meaning, if I have been assigned roles A and B at the BW I will see only worksets A and B inside the role.
The problem is this: From the portal I cannot assign the users to the BW groups and from BW I cannot control pcd roles so this kind of change requires me to make two modifications: One for authorization from the BW and one for presentation from the portal. I would like to manage it just from one place, either from the BW or from the portal, I don't care.
How can I achieve this?

I think I have found a solution: Export it as a role instead of a workset and do one to one assignments with the BW groups.

EP + BW: Problems with user mapping in the portal

Hi,
I'm trying to connect the portal with the BW by using the report RSPOR_SETUP which is a step-by-step guide. The steps #1 - #11 seems to be ok but my problem is the 12th step, the user mapping/allocation maintenance in the portal.
There is an error emerging (in BW): System failure during call of function module RSWR_RFC_SERVICE_TEST (System failure indicates normally an authentication problem between ABAP and Java)
Another error is emerging by testing the connection in the portal. (System administration u2013 system configuration u2013 system landscape u2013 connection test: the first connection, the SAP Web-AS connection is ok but the second, connection test for connector, is not working.
Especially the connection to the backend system with the defined connector is not working. The output is: u201CConnection failure. Check that single sign on is correct configured.
On step 12 of the step-by-step guide I have to select a user in the portal, relate him to a system alias und maintain his technical username and password for the BW. I think here is the problem. Iu2019m able to select and save a system alias for the user, but Iu2019m not able to save his technical username and password. There is another error emerging (in the portal): u201CVerification of user mapping data for system SAP_BW failed, check credentials for errorsu201D, so Iu2019m not able to save the username and password.
I think thats the my problem. the log file confirms that: "Did not find any existing logon data for principal...." & "No user mapping data available for principal...."
I hope my problem description is understandable.
Any ideas how I can solve the credentials problem to save the username and the password?
Thanks in advance.
Tan
Edited by: Tan Yildiz on Jul 22, 2009 1:26 PM

I could deploy some of the usage types, but there is an error regarding the BI-REPPLAN package. I think it's one of the very last errors that stands between me and a working EP - BI connection. There is a problem with the version. Could you check the log details, to find out more?
Thank you.
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[D:\usr\sap\BIP\JC02\SDM\program\log\sdmcl20090806164716.log]/>
<!PATTERN[sdmcl20090806164716.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Aug 6, 2009 6:47:16 PM   Info: -
Starting validation -
Aug 6, 2009 6:47:16 PM   Info: Prerequisite error handling strategy: OnPrerequisiteErrorSkipDepending
Aug 6, 2009 6:47:16 PM   Info: Update strategy: UpdateLowerOrChangedVersions
Aug 6, 2009 6:47:16 PM   Info: Starting deployment prerequisites:
Aug 6, 2009 6:47:18 PM   Info: Loading selected archives...
Aug 6, 2009 6:47:18 PM   Info: Loading archive 'D:\usr\sap\BIP\JC02\SDM\program\temp\BIREPPLAN04_0-10005889.SCA'
Aug 6, 2009 6:47:21 PM   Info: Selected archives successfully loaded.
Aug 6, 2009 6:47:21 PM   Error: Unresolved dependencies found for the following SDAs:
1.: development component 'bi/plan/helpers/table2'/'sap.com'/'MAIN_NW701P03_C'/'2846642'/'0'
dependency:
       name:     'bi/alv/common'
     vendor:     'sap.com'
There is no component either in SDM repository or in Deployment batch that resolves the dependency.
dependency:
       name:     'bi/alv/ui'
     vendor:     'sap.com'
There is no component either in SDM repository or in Deployment batch that resolves the dependency.
Deployment will be aborted.
Aug 6, 2009 6:47:21 PM   Error: No Software Component Archive (SCA) or Software Delivery Archive (SDA) selected. Select at least one.
Deployment will be aborted.
Aug 6, 2009 6:47:21 PM   Error: Prerequisites were aborted.
Aug 6, 2009 6:47:22 PM   Error: Error while creating deployment actions. No Software Component Archive (SCA) or Software Delivery Archive (SDA) selected. Select at least one.
Deployment will be aborted.
Aug 6, 2009 6:47:23 PM   Info: -
Ending validation -

Users details not getting populated in the portal tables..

Hi,
We have implemented single sign on (SSO) and we do not create users in the portal as user/pwd come from OID.
Now becoz of this the portal tables are not getting populated.I require that all the users of the OID to be populated in the portal tables. How can I do it.I depserately require it.

You can use the function wwsec_api.activate_portal_user to create the shadow records in the portal repository.
Ref. : http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1014/wwsec_api.html

Multiple layouts for the same user in the same portal

Hello.
I have a challenge.
Currently there is a portal (6.40) running as a frontend for an application. So the portal is used for only this purpose. The content is a changed masthead and a number of WebDynpros and UWL's all accessing the same backend.
Now there is a wish to use the same portal to execute a transaction iView for the same backend. Simple. BUT when a user uses the portal for the product he/she shall not see the transaction iView and also when the user sees the transaction iView, the WDs and UWL's should not be shown in the navigation. And also the masthead should be different on the two views.
Putting in another portal is not anoption, this should be done on the same portal. The way I expect it to work is by accessing the same portal og two different URL's.
Companies cannot be used since some of the users should be able to access poth views.
I know that in a prefect world it would simply be a matter of creating two different roles and assign them as needed and if the user has both roles hen they would both be available in the navigation. But to the user the portal should look like different portals.
Any suggestions on how to achieve this functionality?
Br,
Thomas Mouritsen

Hi Thomas,
you have several options with the portal standard:
1.) If the user only has one role assigned at a time you can attach the portal layout to the roles. So depending on the role the user has he sees the respective layout - BUT: how to asign the two roles to the user!? This can only be done by admins and I assume that it is no intended to call the admins every time the user needs the other role?
2.) The entry to the portal is realized with different urls like http://yourportal.com/VIEW1 and http://yourportal.com/VIEW2.
VIEW1 and VIEW2 are so called portal aliases and you can attach the different layouts to those aliases.
BUT: the two roles have nothing to do with the aliases so you still have the problem of role assignment.
3.) Each person gets two users with each user assigned to one role and one layout assigned to the user or group or role...
Anyhow: I would ask the people who brought up the idea of two different layouts - WHY?? A portal is ONE single point of entry for EVERY application and information a user needs. So why two different layouts? And what, if five others are coming each bringing their own layouts, too?
4.) If you really want to have different layouts each time a different top-level navigation point is active you have to program your own portal component. That would fit your needs but is besides standard.
Hth,
Michael

How to set password entered by user in the custom self registration app?

Hi All,
I am trying to create a customized self registration page on the portal logon page using Webdynpro JAVA application. Now the problem I am facing is that I am not able to identify how to set the initial password for the user in the portal that is entered by the user while registering through the application.
I am using the object as:
IUserFactory userFact = UMFactory.getUserFactory();
IUserMaint userMaint = userFact.newUser(user);
I am able to set different parameters such as First Name,Last Name, User Id, Email Id, etc but not the password.
Any pointers will be highly appreciated.
Thanks in Advance.
Regards.
Rajat

Hi Rajat Jain,
Try the below code.
IUserAccountFactory mAccountFact = UMFactory.getUserAccountFactory();
IUserAccount userAccount =mAccountFact.getUserAccountByLogonId(login); // Provide login
IUserAccount muserAccount = mAccountFact.getMutableUserAccount(userAccount.getUniqueID());
muserAccount.setPassword(oldPassword.trim(), confirmPassword.trim());
muserAccount.save();
muserAccount.commit();
Regards,
VJR.

Modifications to allow 500 concurrents users in the Portal

Similar Messages

Maybe you are looking for