.: Modifing JSP View to show just part of a select with a WHERE :.

Friends,
I have a table and for this table I've created a view. I want to use this view in order to show just records for some id. I can do this using a where clause, but I would like to know where can I put this where clause. Anybody knos it?
Thanks!

If by "view" you mean ADF Business Components "View Object" then you can edit your view object component in JDeveloper and visit the "Query" panel to type in the WHERE clause that you need.
You can also set the Where clause at runtime if needed, by using the setWhereClause() API.
Both the design-time specified where clause, and the optional runtime-added where clause can have bind variables.
You have to set them programmatically using the setWhereClauseParam() or setWhereClauseParams() API on ViewObject.

Similar Messages

It's evident that JSC doesn't just read the jsp file to show the Design

view. Is there a .form file or something else that it reads?
I say that it's evident because I created a new page, then copied an existing page over it
so that it would start out looking the same - but the Design tab still shows a blank canvas.
Thanks,
Tom

Did you merely copy the JSP source, or did you copy
and paste the components in the design view?We just copied the jsp. We've found that when a jsp gets hosed like this,
we can then copy it again and it often gets straightened out. It's a pain, though.

HT1751 Question: Is it possible to move just part of my iTunes content (i.e. TV shows) to an external harddrive, keeping the rest of the content in place? Several seasons of TV shows are taking up 102 GB of space, and I'm completely out of space on my HD

Is it possible to move just part of my iTunes content (i.e., only TV shows), keeping the rest of the Library in place? I have purchased several seasons of some TV shows, which take up 102 GB on my harddrive, inside my iTunes Media Folder. I don't want to move my entire Library of music and apps etc to the external harddrive (HD), but I rarely watch the TV shows, so wouldn't mind them being located on an external HD, which I would plug in before trying to watch the shows through iTunes?
Any advice?
Thanks!

I don't think you can simultaneously have two libraries open. But you can have your media spread across multiple disk drives. Just change your iTunes preferences such that the option "Copy files to iTunes Music folder when adding to library" is not selected. That way, new items can remain on your external drive if that's where you add them from.
The only caution is if you ever add items to your library from some "temporary" location, such as a USB drive. With these preference changes, iTunes would keep the native file on the USB drive, which would possibly lead to you deleting the file and losing the link. So, when you have your preferences to allow you to add new items to iTunes without copying them to the iTunes Music folder, you would want to put the native files in the desired location first, then add to iTunes.
To move existing videos and podcasts to the external drive, you can either do that as you have been (moving the native files and correcting the ! warning), or simply delete them from the library (but keep the native files) then re-add them from their new location on the external drive (you'd lose play history and ratings though, but may not be an issue for videos and podcasts).

I try to pull up photos in iPhoto and it shows a big "!" I can still see the photo, just can't do anything with it or view it larger. Help! Thank you!

I try to pull up photos in iPhoto and it shows a big "!" I can still see the photo, I just can't do anything with it or view it larger. What happened? Help! Thank you!

This is what I found, Idon't know if it will help, but I'll send them anyway.
https://discussions.apple.com/thread/3873468
http://support.apple.com/kb/PH2449
http://support.apple.com/kb/TS1140
http://support.apple.com/kb/HT1044

I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

Just go back in photoshop and use the Slice Select tool, then just click and select the slice and hit delete - if you're not sure which one is the active slice just right click and find the one that has the Delete Slice option.
It's possible you either added the slices by accident or if you received it from someone they just had the slices hidden. For the future, you can go to View > Show > Slices to display (or hide) slices.

Javax.faces.application.ViewExpiredException: viewId:/greeting.jsp - View /

I'm new to JSF and I am trying to learn it, I tried the first example that comes with JavaEE Tutorial:
I was successfully able to run the guessNumber application on Tomcat 6.x
I left Tomcat and the app idel for a while, when I returned I tried to refresh the page and got this exception , instead of the usual page:
javax.faces.application.ViewExpiredException: viewId:/greeting.jsp - View /greeting.jsp could not be restored.
     com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:185)
     com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
     com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:117)
     javax.faces.webapp.FacesServlet.service(FacesServlet.java:244)Then I did an ant clean build on the application and shutdown tomcat and restarted it, to try this example again, but the above error reoccurs.
Has anyone solved this exception or know anything about what coudl be the cause?
I've already tried Google, but couldn't find a response from anyone that solved it yet.
Many thanks for your help.

I just solved this problem.
Even though I had shut-down Tomcat, I was still using the same browser instance.
When I closed the old instance and used a new browser instance of Firefox - it displayed normally.
However, I have another problem ( a different one) - when I try to open the app in Internet Explorer 7, instead of rendering the JSP page , IE asks me to download it.
And the file type has changed from JSP to jsp_auto_file , but IE is was rendering this page properly - I don't know what's causing it to not render it now.
Also IE shows a default pop-up blocker when I try to load the above example.
Message was edited by:
appy77

Does anyone know if it is possible to change the display in week view to show 24 hours per day for those of us that work irregular hours

Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

The old calender iOS6, in the year view, it shows how much busy I am in a day by indicating the color intensity. But the new calendar year view is totally useless!!! also too bright!! Why apple does this?? What is the way to revert the calendar back???

The old calender iOS6, in the year view, it shows how much busy I am in a day by indicating the color intensity. But the new calendar year view is totally useless!!! also too bright!! Why apple does this?? What is the way to revert the calendar back???

Unfortunately, that's the way the cookie crumbles nowadays. Sir Jony Ive's GUI design for iOS7 has been met with much skepticism (to say the least). But until the company sees the compelling need for an adjustment or reversal, it "ain't happenin' ". So amble over to the feedback page ( http://www.apple.com/feedback/ ) and make your displeasure known to the company, OR make it known by not purchasing its products. Because as long as the iGadgets continue selling as fast as they can make them, they will see no need for change.
BTW, do note you are NOT talking to Apple here. This is just a user-to-user forum.
Edit: for now, you can also try out any of the alternate calendaring apps available in the App Store.

Album List view only showing one or two tracks from each albulm

Hello there, could anybody help me find a solution to this problem...
My music shows fine in the three other view options its just now that when i choose the album list view i only get one song per album on view and its not the same number track eg 1 .
all other view work fine!
thanks

Did you try to download them again for free?
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to design a Java viewer to show MS Word

Hello,
I want to design a Java viewer to show MS Word document, and I don't know
how to start, or where I can find the resource for reference.
Anyone can help me?
Martin

Dear DrClap,
^ ^ Thanks.
Firstly, I think it's not difficult, but now I knew it's not easy.
I check Jakarta POI project, but unfortunately its sub-project HDF about Word
file format is just starting. So only can find is about Excel now.
Actually, I just want to show the document as like showing picture, and I don't
hope users to modify it. Do you have any other good suggestion.

FAQ: Can I filter the photos to show just those taken by someone, or liked, or commented on?

FAQ: Can I filter the photos to show just those taken by someone, or liked, or commented on?
Answer:
Yes, GroupPix can show you just subsets of photos at a time.
To see just the photos from a particular person,
iOS: go into full screen view for a photo, then tap that person's name; you will see a grid showing only those photos contributed by that person.
Android: go into an event, select the menu under the Event name, and tap 'Photographer' to show a list of contributors to an event. Tap a person to see their photos.
To see photos that are liked or have comments, tap the Filter button in the upper-left of the screen. Then, choose just Liked Photos or Commented Photos.
Tap the back arrow to return to full the Group Album.

FAQ: Can I filter the photos to show just those taken by someone, or liked, or commented on?
Answer:
Yes, GroupPix can show you just subsets of photos at a time.
To see just the photos from a particular person,
iOS: go into full screen view for a photo, then tap that person's name; you will see a grid showing only those photos contributed by that person.
Android: go into an event, select the menu under the Event name, and tap 'Photographer' to show a list of contributors to an event. Tap a person to see their photos.
To see photos that are liked or have comments, tap the Filter button in the upper-left of the screen. Then, choose just Liked Photos or Commented Photos.
Tap the back arrow to return to full the Group Album.

Yahoo is my home page and News, Sports, Business links now shows a few sentences after each main URL link. How do I put it back to show just the URL links?

Yahoo is my home page and News, Sports, Business categories/links changed and now shows a few sentences after each main URL link/topic. How do I put it back to show just the URL links/topics without having to scroll down and down the page. All the extra sentences after the links causes too much scrolling to view the topics.

Those steps did not solve my problem. Here is an example of what I see although it's not exact copy/paste. All I want to see are the links but I get all the verbiage after the links
Firefox 17.0.1 version
''' '''Ask Stacy: How Can I Rebuild My Credit?''''''
Here’s a question familiar to millions of Americans… Stacy, My wife and I recently filed for bankruptcy due to high medical bills we were unable to pay. We purposefully didn’t add our Wells Fargo credit ...
Money Talks News
'''Analysis: High stakes for Cuba in Chavez's cancer battle'''
HAVANA (Reuters) - As Venezuelan President Hugo Chavez recovers in Havana from his fourth cancer operation, Cubans face renewed worries about their economic future if the country's top ally dies or has to step down from office. Cuba has staked its economic well-being on the success - and generosity…
41 mins agoReuters
[$$] Playing FICC or Treat With Bank Investors
'''Playing FICC or Treat With Bank Investors'''
The Wall Street Journal
AdChoices
'''Cybergeddon
A digital crime thriller from Anthony E. Zuicker, the creator of CSI. Only on Yahoo!
And here is what Internet Explore shows: All LINKS below
'''Molten gold signals mining's return to Calif.'s Mother Lode'''
'''Century-old fight for Budweiser name hits new snag'''
'''NRA goes silent after Connecticut school shooting'''
'''.Authorities: Kansas man who killed 2 cops dies'''

Making a password show what parts of the document you see

I have a random request from a client that I am not sure is even possible.
They want their document to be used by two people, one of them will only be able to see say 4 pages of it while the other will be able to see it all including what the person before had entered.
I think you can get around the text part quite easily but to have it show different parts of the form via a password is very hard for me to do (even if it is possible at all)
Can anyone lend me a hand in this?
If you need me information feel free to ask.

It sure is possible. I have been doing it for quite some time now and this would be a perfect situation for the Action Builder if coding in FormCalc is not your thing, but I can give you both.. I will use a sample form for the demo so if the lingo doesn't match up to your form, let me know or if you need an example. If anyone has anything simpler or I missed something, let me know. PM me if you want a sample form.
Create a new PDF and add in a second blank page and set that page to hidden in the Object field. Place a text field on page 1. Go to the Action Builder (in Windows go to the toolbar at the top, then "Tools" then select "Action Builder". The Action Builder is a great tool to add some extra functions into your PDFs with the preset actions. From the Action Tool box select the "Add New Item" from the top left of the box, right next to the trash can icon. This will create a new Action. There are 2 things for the Action: a condition and then a result. In the Condition section click the "object" link and then select the text field you put on page 1. Once you select the text field, the Condition box will change to "when text field TextField1...." and there will be 2 drop down boxes. With the condition set as "Is" put your password in the blank field. Then in the Result section select the drop down box and go to "Show/Hide an Object"and then select Page 2. What this will do is when TextField1 is equal to your password, page 2 will be visible. You can do this with not only a page, but specific elements within the PDF. So additional Textfields, pages, static text or other elements. One thing to keep in mind is what I like to call "foward/backwards logic" in that a user can enter the password to show the data, then remove it to hide whatever. Just go back through the Action Builder in reverse order that you did, where when TextField1 IS NOT the password, set the elements to hidden.
If you can do this via Formcalc, the setup would be similar, but instead of using the Action Builder you could do something like, create a numericField that has a number based password. On that field, go to your Script Editor, select "Change: from the show section, change the Language to FormCalc and then enter:
if ($.rawValue==1)then
xfa.resolveNode("Page1).presence = "visible"
else xfa.resolveNode("Page1").presence = "hidden"
endif
The bolded 1 is the password. The second and third lines cover what you want hidden or visible. So change whatever you want the password to, change the hidden and visible sections and then give it a try. You could even set this on a docReady show option as well to check that field when the form is opened if perhaps the first person saved the PDF with the hidden sections open. That way they do not need to enter the password every single time. Of course before they send it they should remove the password. Just be ready that whenever the user opens the form, even if they do not change anything, they will be prompted to save.

Show only part of a list in dependencies of a node

I have a XMLlistCollection who shall fill up my Applikation.
In some views I only want to show a part of all entries. Equivalent
to a mysql query where I can say: give me all where myNode contains
this string.
Is there a way to to so? I did a research since 3h, but I'm
sure for what to search.
Any hint would be appreciated.
Michael

Look into "filter" for collections.
For XML, use e4x expressions.
Tracy

Aperture not showing (just black) newly imported JPEG files

RE: Aperture not showing newly imported JPEG files.
In fact its just black instead of the actual image. (see attached screen shot)
When double clicking on this - i.e. to go to the edit mode, the image then appears.
If I return to the viewing screen without changing anything to that image it remains black.
If I make any kind of change to the image, the image will appear when returning to the viewing screen.
Aperture seems only to have started behaving like this after update to OS X 10.10 (Yosemite)
I have the latest Aperture 3.6
Latest Digital Camera Raw 6.00 Build 761.5 and Digital Camera Raw Support 6000 Build 131.1
RAW files (taken with same camera) are displayed without any issues.
JPEG image files have been taken with a Sony RX100
JPEG image files taken with the same device imported into Aperture before OSX update to 10.10 have appear to have no issues
I cannot say if JPEG files taken with a different device have similar issues.
All files have been been reprocessed to latest edition of aperture
I have had other issues of other types of files (i.e. TIFF output files 'unsupported image format' behaving oddly including inconsistent behaviour after having been processed by 3rd party aperture plug-in's - although this has now largely been solved.
I remember having similar issues of files behaving strangely in Aperture after last update to OS X (Mavericks) - forget how this was solved - but I'm pretty sure it was not an issue involving JPEGS
Many thanks

...this sounds very similar to the problem I had on a previous aperture update and I had a similar issue - to that - with the .tiff files output from RAW files and an HDR plug-in.
In the first instance, I cannot remember for sure, but maybe it was something to do with not having the latest RAW File update for Aperture specific to that latest Aperture Update and specific to a Sony RX100 (or it could have been a Nikon d700).
I found the RAW file update - I'm not sure it was being made available from the App Store - and everything was fine.
With the more recent issue, I'm pretty sure this was resolved by updating to the latest Photomatix HDR plug-in.
So I'm just stuck on the issue with the JPEGs now.

.: Modifing JSP View to show just part of a select with a WHERE :.

Similar Messages

Maybe you are looking for