Modifying the Mini TOC Placeholder

I am on a mission to change the way the Mini TOC looks on our WebHelp pages. Maybe somebody out there has done this, or can help us understand the CSS classes better so we can attack the problem ourselves.
First, we want the TOC to be inside a bordered box. Piece of cake. Peter Grainge's suggestion to throw it into a table cell works perfectly.
Then, we want a graphic to the left of the caption. It won't be a white box with an X in it, but below shows the rough location. I've kinda sorta done this by adding a column to the left of the one that holds the MiniTOC, but the alignment isn't pretty, and it causes a conflict with our next goal.
The next goal is to have a two-tone Mini TOC, as in the example below.
Finally, we want to push the word "Show" or "Hide" flush right against the right margin of the cell while keeping the caption (in this case, "QuickLinks") to the left. I have been successful with adding a bunch of spaces after the caption, followed by the words "Click to" but it's not clean, and would require me to change the number of spaces manually on each page, depending on how long the links are.
Has anybody hacked into their Mini TOC before to manipulate it similar to what we are looking for? We're having a rough time even editing the CSS styles to work the way we want, and are hoping there's a simpler way to attack the problem. Thanks.

Don Quixote, is that you?
Seriously...RH has this placeholder function locked in pretty tight (I tried adding an image inside the code and RH crashed!).
We use a div element to place the placeholder at the top right of the topic:
div#navright {
float: right;
padding-top: 0px;
padding-right: 8px;
padding-left: 10px;
padding-bottom: 10px;
width: auto;
margin-left: 15px;
margin-bottom: 15px;
margin-top: 5px;
Then the topic gets this:
<?rh-cbt_start condition="Online" ?><div id="navright">
<?rh-placeholder type="minitoc" ph-style="font-family:Verdana;font-size:8pt;font-weight: normal;font-style: normal;text-decoration: none;"
  list-type="none" caption="In This Topic" caption-style="font-family:Arial;font-size:8pt;font-weight: normal;font-style: normal;text-decoration: none;"
  margin=";;0px;0px" min-heading-level="h2" max-heading-level="h2" flags="3" ?>
</div><?rh-cbt_end ?>
You could try adding background-color and border-color styles to the div, and then adding highlighting to the placeholder caption in the UI (this might get you the two-tone you want, not sure). As to the image and right-aligned link, you and Sancho might have better luck at the next windmill.
Good luck,
Leon

Similar Messages

  • Mini TOC does not appear

    RoboHelp 9.0.0.228/Server 9
    WebHelp Pro
    Single Project (upgraded from RH x5 to RH9)
    The mini TOC seems to work in some, but not all topics.  In the topics where it is not working, the mini TOC placeholder appears in the Design veiw, but when the topic is viewed (eye glasses icon) or the entire project is generated and viewed, the mini TOC is not there.
    Any ideas why not?
    Thank you,
    Eva

    Here's the code (most content was replaced with "TEXT").  In this example, we only have heading 1 and heading 2 applied.
    <?xml version="1.0" encoding="utf-8" ?>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <meta name="topic-check-list" content="Ran Smart Index" />
    <meta name="build tags" content="Inbound" />
    <meta name="generator" content="Adobe RoboHelp 9" />
    <title>Rebate Program</title>
    <link rel="StyleSheet" href="..\..\default.css" type="text/css" />
    </head>
    <body>
    <?rh-region_start type="header" style="width: 100%; position: relative;" ?>       <p>Last revised: TEXT </p>
    <?rh-region_end type="header" ?>
    <h1> Rebate Program</h1>
    <p>TEXT.</p>
    <p class="Note">TEXT.</p>
    <p>&#160;</p>
    <p style="text-align: center;"><span style="font-size: 11pt; font-variant: small-caps; color: #ff0000; font-weight: bold;">IMPORTANT:</span>
    <span style="font-size: 11pt; font-variant: small-caps; font-weight: bold;">Do
    not</span> <span style="font-size: 11pt; font-variant: small-caps;"> TEXT.</span></p>
    <p style="text-align: center;">&#160;</p>
    <h2>Rebate Program Overview</h2>
    <p> TEXT. &#160;&#160;</p>
    <p>&#160;</p>
    <p> TEXT <?rh-symbol_start name="Trademark" ?>™<?rh-symbol_end ?></p>
    <p>&#160;</p>
    <h2>Additional Program Details</h2>
    <ul type="disc">
                    <li class="p" style="background-color: Transparent; font-size: 10pt;"><p> TEXT <span style="font-weight: bold;"><b>TEXT</b></span> TEXT</p></li>
    </ul>
    <p class="Note"> TEXT <span
                    style="background-color: Transparent;"> TEXT </span><span
                    style="background-color: Transparent; font-weight: bold;">within</span><span
                    style="background-color: Transparent;"> TEXT <font color="#000000">rebate</font>.</span></p>
    <ul style="font-size: 10pt;" type="disc">
                    <li class="p" style="background-color: Transparent; font-size: 10pt;"><p> TEXT <span style="font-weight: bold;"><b>must</b></span>&#160; TEXT <font color="#000000">rebate</font>:</p></li>
    </ul>
    <table style="margin-left: 160px; border-collapse: separate; border-collapse: separate;"
                                    cellspacing="0" width="54.061%" border="1">
                    <col style="width: 53.109%;" />
                    <col width="181" />
                    <tr>
                                    <td><ul style="font-size: 10pt;" type="circle">
                                                    <li style="font-size: 10pt;"> TEXT *</li>
                                                    <li style="font-size: 10pt;"> TEXT *</li>
                                                    <li style="font-size: 10pt;"> TEXT </li>
                                    </ul></td>
                                    <td style="vertical-align: top;"><ul style="font-size: 10pt;" type="circle">
                                                    <li style="font-size: 10pt;"> TEXT </li>
                                                    <li style="font-size: 10pt;"> TEXT </li>
                                                    <li style="font-size: 10pt;"> TEXT </li>
                                    </ul></td>
                    </tr>
                    <tr>
                                    <td colspan="2"><p style="text-align: center; font-size: 10pt;">(*)
                                    TEXT </p>
                                    <p style="text-align: center; font-size: 10pt;">&#160;the Product
                                    Placement Card.</p></td>
                                    </tr>
    </table>
    <ul style="font-size: 10pt;" type="disc">
                    <li class="p" style="background-color: Transparent; font-size: 10pt;"><p>Maximum
                    <font color="#000000">rebate</font> TEXT p></li>
    </ul>
    <p class="Note"> TEXT <span style="background-color: Transparent;"> TEXT.</span></p>
    <ul type="disc">
                    <li class="p" style="background-color: Transparent;"><p><font color="#000000">Rebate</font>
                    TEXT.</p></li>
    </ul>
    <p class="Note" style="background-color: Transparent;"><span><b style="font-weight: bold;">Do
    Not</b></span> TEXT.</p>
    <ul type="disc">
                    <li class="p" style="background-color: Transparent;"><p> TEXT Card <font color="#000000">Rebate</font> Program.</p></li>
    </ul>
    <p>&#160;</p>
    <h2> TEXT <span style="font-size: 12pt; color: #000000;"> TEXT </span></h2>
    <p class="Note"><span style="font-weight: bold;"> TEXT </span> TEXT.</p>
    <ol start="1" type="1">
                    <li class="p" style="font-size: 10pt;"><p> TEXT <a href="..\..\Product\Order_Handling\Product.htm"
                                                                                                                                                                                                                                      target="_blank"
                                                                                                                                                                                                                                      style="font-size: 10pt;"> TEXT </a>.</p></li>
                    <li class="p" style="font-size: 10pt;"><p> TEXT <span style="font-weight: bold;">Billing,
                    TEXT </span> TEXT</p></li>
    </ol>
    <p>&#160;</p>
    <h2>Procedure - Internal Customers <span style="font-size: 12pt; color: #000000;">(E.g.,
    KCI Reps)</span></h2>
    <ol start="1" type="1">
                    <li style="font-size: 10pt;"><span> TEXT </span></li>
    </ol>
    <p>&#160;</p>
    <p>
    <!--Metadata type="DesignerControl" startspan
    <object classid="clsid:FF80F713-5DC6-11d0-A7B4-00AADC53E937" id="RelatedTopics"
                                    border="0" style="margin-top: 0px; margin-bottom: 0px; margin-left: 0px;
                                    margin-right: 0px;" align="bottom">
    <param name="_Version" value="65536"  />
    <param name="_ExtentX" value="2408"  />
    <param name="_ExtentY" value="609"  />
    <param name="_StockProps" value="13"  />
    <param name="ForeColor" value="0"  />
    <param name="BackColor" value="14215660"  />
    <param name="UseButton" value="-1"  />
    <param name="UseText" value="0"  />
    <param name="ControlLabel" value="Related Topics"  />
    <param name="UseIcon" value="0"  />
    <param name="Items" value="New KCI Products;..\..\Product\New_KCI_Products.htm$$**$$"
      />
    <param name="Image" value=""  />
    <param name="FontInfo" value="Arial,8,0,,"  />
    <param name="_CURRENTFILEPATH" value="C:\ TEXT \Rebate_Program.htm"
      />
    <param name="_ID" value="RelatedTopics"  />
    <param name="UseMenu" value="-1"  />
    <param name="Frame" value="_blank"  />
    <param name="Window" value=""  />
    </object>-->
    <object
      classid="clsid:ADB880A6-D8FF-11CF-9377-00AA003B7A11"
      id="RelatedTopics"  type="application/x-oleobject" >
      <param  name="Command"  value="Related Topics,MENU" />
      <param  name="Button"  value="Text:Related Topics" />
      <param  name="Font"  value="Arial,8,0,," />
      <param  name="Frame"  value="_blank" />
      <param  name="Item1"  value="New Products;..\..\Product\New_Products.htm" />
    </object>
    <!--Metadata type="DesignerControl" endspan-->
    </p>
    <?rh-region_start type="footer" style="width: 100%; position: relative;" ?>
                    <p>Created on: 10/06/10</p>
    <?rh-region_end type="footer" ?>
    </body>
    </html>

  • Heading level tag in mini-TOC

    Is there a way to change the tags used in the mini-TOC for TC3? My docs are linked from FrameMaker and they don't use Heading 1, Heading 2, etc, so this handy tool is not working for me. Thanks for any help!

    For many reasons, I suggest changing your mappings so that they map to h1, h2, etc.
    This should get your miniTOCs back into shape.
    -Matt

  • Where is mini TOC and Resource drop-down?

    This is really silly, but I can't figure out why I don't see the Resource links I've defined in my AIR Single Source Layout when I view the output.  Even worse, I don't see where you specify a mini TOC in the Single Source Layout properties.  Help. (I didn't see it in the help, either.)
    I have upgraded to Robohelp8 and don't see the mini TOC setting in the layout.  (I see it if I use the packager for RH7)

    I've noticed that the Resource list can be a bit buggy. On some AIR files I've generated, the list of resources are from another project or even have duplicate entries. I haven't figured out yet why. But to give you two tips:
    When testing the AIR Help, always install it on your computer. "Viewing the result" after the Help has been generated (that is, not installing the Help) can display different results (the resource list and inability to view PDFs are two differences that come to mind).
    If the results from 1. aren't what you expect, install the AIR Help on another computer and test the result. When my Resource list was (and still is) incorrect - even though the list in the SSL is correct - I installed the Help on another machine and everything was as it should be.
    As I said, I don't know why the Resource list is getting corrupted/missing on the computer that generates the Help, but you may want to test it on another PC first.
    Jason
    PS I can't help with the mini-TOC problem as I've never used this feature. Mini-TOCs are possible with RH8 however. I'll have to defer to another forum member though...

  • Mini-Toc from Linked FM document (FM10 / RH9)

    Hi all,
    I'm a newbie in the use of RH, BUT, I'm trying hard
    My question might be quite similar to this one : http://forums.adobe.com/message/5301262#5301262
    Is there a way, in a RH project created from Linked FM files, to insert a mini-TOC in a document ? Of course, all the mini-TOCs I've inserted in RH have disappeared when I updated my links with FM.
    From what I understood in the topic I mentioned, there seems to be no way to do this. BUT, hopefully, has someone found a solution to this problem ?
    Thanks a lot
    All the best

    The only solution from the Rh side is to insert your mini TOC on the header of your Rh master page...
    Unfortunately, you may not want the mini TOC above your Topic Title, but that's the only way (I know of to get the content to appear automatically.
    Putting it into your Rh topic manually will either restrict your ability to update the Fm content (bad...) or require post processing of the Rh topic after each update (bad...)
    My preferred solution: create the mini TOC within your Fm file itself using cross refs, or plugins (Rick Quatro has a FrameScript solution, IIRC) so that the content exists in Fm when you update the Rh project.
    -Matt
    Matt R. Sullivan
    co-author Publishing Fundamentals: Unstructured FrameMaker 11 (now in EPUB!)

  • [bug tracker issue] Any way to modify the bug detail of mine?

    Greetings,
    I just found i can't modify the bug report  after i reported a new bug in the bug tracker of archlinux.
    it is quite inconvent and weird, since it's quite common that you want to update the bug detail or change something wrong. 
    at least , in my opinion. -_-
    so Is any reason for such restirction?
    and is any way to make me modify my bug report?
    -Roadt
    Last edited by roadt (2009-12-28 06:55:52)

    Just add  your update as a comment.

  • Edit Mini TOC style

    In our project we use a specific style to present a minitoc
    on a page. With Robohelp 7 we had to manually make bookmarks and
    hyperlinks. The minitoc seems a perfect improvement. Well, maybe
    not so perfect.
    I want to use the same styles as we used in robohelp 7 in the
    minitoc, but it seems that Robohelp 8 decides the font and
    bulleting style for me.
    Does anybody know if it is possible to link a level in the
    minitoc to a style from the stylesheet?

    Hi,
    MiniTOC style is controlled by the MiniTOC Options dialog,
    which is launched on inserting/editing a MiniTOC Placeholder. To
    control fonts and bulleting styles from the CSS, you may change the
    properties of li, ul(For bulleted Mini TOC) and ol(For numbered
    Mini TOC) as per your requirement, and just check "Use Style from
    Topic" check box present in the MiniTOC options dialog.
    With this check box checked most of the styling properties
    will be taken from CSS itself.

  • Service Desk Mail - Modify the subject -adding ticket number and descriptio

    Hello,
    I have activated the automatic sending of email when a new ticket arrives into the Service Desk. I am using the standard notifcation smartform  However all the mails arrive in the inbox with the same subject, so no possibility of making a quick identification of the ticket.
    I heard that is possible to add additional fields in the subject of the mail using some "&" parameters.  However I do not have a clue where to modify and what type of & parameters are available.  Is that I need to copy and modify the smart form somewhere??
    I appreciate your inputs.
    Regards
    Esteban Hartzstein

    Hi Esteban,
    The subject line corresponds to the name of the smart form that you can maintain in the "description" field in the sap form builder. you can add dinamyc parameters to the subject by using the placeholder "&". e.g.: & | Action Required.
    On se24, copy the class CL_DOC_PROCESSING_CRM_ORDER into the customer workspace (ZCL_DOC_PROCESSING_CRM_ORDER). then edit it and navigate to line 185 and change the following:
    REPLACE '&' WITH ls_orderadm_h-object_id INTO ls_output_options- tdtitle.
    Other example to use as subject:
    Object ID + Priority + Description
    Field description value: &1 | &2 | &3
    On the class:
    REPLACE '&1' WITH ls_orderadm_h-object_id INTO ls_output_options- tdtitle.
    REPLACE '&2' WITH ls_activity_h-priority INTO ls_output_options- tdtitle.
    REPLACE '&3' WITH ls_orderadm_h-description INTO ls_output_options- tdtitle.
    More information on this on the book: SAP Solution Manager Service Desk - Functionality and Implementation
    Hope I can help.
    Regards,
    Ricardo

  • In List, How to modify the Link in Quick Edit Mode?

    In List, How to modify the Edit in Quic Mode Link? Instead of opening Quick view mode, to open in InfoPath customized form?

    Hi Eugene,
    According to your description, my understanding is that you want to midify the link of "Edit" and set it linking to a InfoPath Form which can bulk edit your List.
    You can use the code above to modify the Edit's hyperlink and set it linking to your InfoPath form.
    <script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
    <script type="text/javascript">
    $(document).ready(function () {
    $("#idHomePageNewItem").next("a").attr("href","the URL of your InfoPath form");
    $("#idHomePageNewItem").next("a").removeAttr("onclick");
    </script>
    For more information about bulk updating a SharePoint list using InfoPath form, you can have a look at the blog:
    https://social.msdn.microsoft.com/Forums/sharepoint/en-US/c05983fc-d992-49ff-8d18-fa8f70777d66/using-infopath-2010-to-bulk-update-a-sharepoint-list?forum=sharepointcustomizationprevious
    http://infopath.wordpress.com/2013/09/23/infopath-repeating-table-add-edit-delete-sharepoint-list-items-bulk/
    http://sharepointknowledgebase.blogspot.com/2011/10/updating-sharepoint-list-by-using.html#.VGFsKHkcSM8
    If any misunstanding, please feel free reminding me and provide more detail for your issue.
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • How to display the master TOC when using Context help in a merged document

    I use Robohelp 10. I have created a large Merged Webhelp project and I have set out the project master with nothing in it other than merged projects place markers.
    This is the layout of the generated projects etc.
    Generate
              Master.htm
                   Redirect.htm  (Home page is a redirect to Project 1 Home Page - not in TOC)
    mergedProjects
              Project1
                  Home Page.htm
              Project2
                   Redirect.htm  (Home page is a redirect to Project 1 Home Page - not in TOC)
              Project3 etc.
                    Redirect.htm  (Home page is a redirect to Project 1 Home Page - not in TOC)
    I can get the help to work great when I call up the master page, which shows the TOC for the whole project and the default home page. And from the breadcrumb the home link goes to the home page and shows the Main TOC
    However when I call a page using context help ID I get a single frame with the selected page. The link to show the TOC shows the TOC but it is the top of the merged project and not the master TOC. The home link in the does display the home page but again the displayed TOC is the one of the current merged project.
    The question is :
    How can I get the Master TOC to show all the time regardless of what page I call using a context ID or how can I create a link that will take me back to the Master TOC?
    I remember when I created a previous help file for chm output I had to modify all the ali files in order for the redirect to work throught the master chm. Surely this is not the case with webhelp?
    TonyC

    I am sorry that I didn't get back to all you guys that took to answering my very promptly. Unfortunately I was not in a position to answer to the suggestions made. as I was away from my computer which had Robohelp on.
    Anyway, I did try a couple of scripts mentioned, but didn't really have any success i achieving what I need to do.
    I set up a redirect which redirected to the main home page. I tried setting the home page in a  main sub-project - so the redirect when from any sub project
    Generate
         Master-project.htm (Home Page = Help_Welcome.htm)
    merged Projects
    SubProject1
                [Home Page =  home_redirect.htm (a redirect see below) ]
         SubProject 2
                [Home Page =  home_redirect.htm (a redirect see below) ]
         SubProject 3
                [Home Page =  home_redirect.htm (a redirect see below) ]
    home_redirect.htm  (a redirect use by sub-topics)
    <!--
       window.location="../../ Help_Welcome.htm ";
    //-->
    //]]></script>
    This setup works fine as long as I call the master page. The TOC is as I would want. However if I call an ID from my application I get the required page to display and I can get the TOC to show. The problem is that the TOC is from the current sub-project and not the master project as I would want.

  • RH 9, MS Word, Heading styles messing up my mini TOC

    I must be doing something wrong. :-)
    I have done many Word to RH projects. All the same look and feel. I include a mini TOC at the top of my topics, (which are actually book chapters). Now, however, my mini TOCs have no contents in them, and the reason is that my headings are not called "Heading 1, Heading 2" etc, which is what RH requires for mini TOCs. My heading styles came in as "WD_Heading1, WD_Heading2" etc.
    I do not know why they came in like that. I imported the Word files as I always do. I tried renaming the headings styles, but no go.
    What up wit this? Please advise. Thanks!

    Yes, I was doing something wrong.
    During import of the MSWord doc, I forgot to make sure each Word Document paragraph style was mapped to a RoboHelp Style in the drop-down list. A simple step.
    You know, I don't remember having to do this before. I believe the Robohelp style (Heading 1, Heading 2, etc.) was selected by default. Perhaps because I was using a previous proejct as a template.
    Well I am happy to answer my own question for anyone else who runs into this problem. It is not too gratifying, however, as it feels like scoring a goal on your own goalie.

  • How do you modify the default Execute thread count in Weblogic Server 9.2?

    How do you modify the default Execute thread count in Weblogic Server 9.2?
    How can you tune the starting number of weblogic.ExecuteThread on server startup and/or set minimum number?
    Is there an option from the console?
    Please let me know.
    Thanks

    Self tuning will automatically manage the threads but however you can still control the min and max by adding the min and max values for each instance either directly adding in config.xml or through JVM settings
    1) Modifying the config.xml
    Just add the following line(s) to each server definition :
    <server>
    <name>AdminServer</name>
    <self-tuning-thread-pool-size-min>100</self-tuning-thread-pool-size-min>
    <self-tuning-thread-pool-size-max>200</self-tuning-thread-pool-size-max>
    </server>
    2) Adding some JVM parameters
    It's safer the following way :
    add the following option in your command line : -Dweblogic.threadpool.MinPoolSize=100
    Regards
    RR

  • I did a presentation with many images and animations, now I need to change only the images without modify the related animations. How can I do it?

    I did a presentation with many images and animations, now I need to change only the images without modify the related animations. How can I do it?
    I use Keynote 09

    Select the image you want to change and go to Format Menu>Advanced>Define as Media Placeholder (or command, option, control i).

  • Modify Mac Mini case for access?

    I know it sounds extreme, but has anyone modified the Mac Mini case for easy access to the hard drive? I am considering buying a Mac Mini Server, but don't want to do Mac-surgery anytime I may need or want to swap hard drives. I watched this tear down video and thought it would be so much easier it had an access door on the top or no case at all. What do you guys think?
    http://www.youtube.com/watch?v=wZy0wPniqqo

    I can't imagine how you could modify the case enough to make it easy to access the drives and not just in essence destroy the case. I'd strongly suggest either using external Firewire drives or getting a Mac Pro.
    Regards.

  • Need to modify the query

    Hi All,
    I am a new DBA. Please help me in modifying the below query in test envirnoment. It is long query.
    SELECT NVL(MIN(P_LAY),0), NVL(MIN(TID),0), NVL(MIN(TTIME),0), NVL(MIN(TSOURCE),0) FROM ( SELECT P_LAY, TID, TTIME, TSOURCE FROM ( SELECT (CASE WHEN T1.INTERNAL_TYPE=3 THEN -1 ELSE T_REPORT.GET_LAY(T1.EVE_ID, T1.EVE_TIME,:B4 ) END ) P_LAY, T1.EVE_ID TID, T1.EVE_TIME TTIME, T1.ALA_SOURCE_ID TSOURCE FROM T_EVE_LOG T1, T_EVE_LOG T2 WHERE T1.ALA_ID = T2.ROOT_ALA_ID AND T2.EVE_TIME >= :B3 AND T2.EVE_TIME < :B2 AND T2.ALA_ID = :B1 AND T2.ACT_ID IN (2,5) ) ORDER BY P_LAY ) WHERE ROWNUM = 1
    Thanks in Advance

    886755 wrote:
    Hi All,
    I am a new DBA. Please help me in modifying the below query in test envirnoment. It is long query.
    SELECT NVL(MIN(P_LAY),0), NVL(MIN(TID),0), NVL(MIN(TTIME),0), NVL(MIN(TSOURCE),0) FROM ( SELECT P_LAY, TID, TTIME, TSOURCE FROM ( SELECT (CASE WHEN T1.INTERNAL_TYPE=3 THEN -1 ELSE T_REPORT.GET_LAY(T1.EVE_ID, T1.EVE_TIME,:B4 ) END ) P_LAY, T1.EVE_ID TID, T1.EVE_TIME TTIME, T1.ALA_SOURCE_ID TSOURCE FROM T_EVE_LOG T1, T_EVE_LOG T2 WHERE T1.ALA_ID = T2.ROOT_ALA_ID AND T2.EVE_TIME >= :B3 AND T2.EVE_TIME < :B2 AND T2.ALA_ID = :B1 AND T2.ACT_ID IN (2,5) ) ORDER BY P_LAY ) WHERE ROWNUM = 1
    Thanks in Advancemodify it how to do what?
    SELECT Nvl(MIN(p_lay), 0),
           Nvl(MIN(tid), 0),
           Nvl(MIN(ttime), 0),
           Nvl(MIN(tsource), 0)
    FROM   (SELECT p_lay,
                   tid,
                   ttime,
                   tsource
            FROM   (SELECT ( CASE
                               WHEN t1.internal_type = 3 THEN -1
                               ELSE t_report.Get_lay(t1.eve_id, t1.eve_time, :B4)
                             END )          p_lay,
                           t1.eve_id        tid,
                           t1.eve_time      ttime,
                           t1.ala_source_id tsource
                    FROM   t_eve_log t1,
                           t_eve_log t2
                    WHERE  t1.ala_id = t2.root_ala_id
                           AND t2.eve_time >= :B3
                           AND t2.eve_time < :B2
                           AND t2.ala_id = :B1
                           AND t2.act_id IN ( 2, 5 ))
            ORDER  BY p_lay)
    WHERE  ROWNUM = 1 

Maybe you are looking for

  • External Editor in Aperture

    I mistakenly selected using Lightroom as an external editor in Aperture. When I go back to preferences, I can't seem to make the Edit With field blank. Or in other words, how can I change it such that I always edit with Aperture?

  • Interrupt a perform-on commit.

    Hi all, How to interrupt a perform which is done on ON-COMMIT statement. Will the ROLLBACK WORK will effect.. Thanks & Regards, Neslin.

  • Message control and G/L posting

    Hi! I am looking into the possibility of triggering an Idoc output of type ACC_GL_POSTING, as soon as someone makes a posting into the G/L, eg through fb50. When moving into NACE for configuring, an application Id must be chosen for in order to confi

  • ANN: DeforceCSS 1.3 (Extension to fix GoLive 9 CSS behavior)

    Oliver Michalak (with a small contribution from me) has created a new extension to fix the annoying auto-generated CSS created by editing objects in Layout view in GoLive 9. http://golive.werk01.de/DeforceCSS/ Background: GoLive moves some attributes

  • Trying to update to 4.0 and being told that Firefox is not supported in this architecture?

    Running 10.5.8 on my Powerbook G4 and trying to update to 4.0 and when I click on the Firefox folder that downloaded to my desktop to initiate the update the is a white circle with line thru it and say that I can't open the application Firefox becaus