Module Pool Programming adding line items.
Hi,
I am Doing Module Pool Programming in which I Should add line items and if the user gives the save button the data wil be saved in tables and SAP should generate one unique number.
Please give me inputs how to generate unique number and add n number of line items
correct inputs are rewarded
Thanks
Rasheed.
Hi,
You may use Number Generator for generating unique ids in the system.
The keyword DEFAULT SERIAL gets a number generator for positive integers and can only be specified for columns that have the data type INTEGER, SMALLINT, and FIXED without decimal places (SERIAL).
The first value generated by the generator can be defined by specifying an unsigned integer (must be greater than 0). If this definition is missing, 1 is defined as the first value.
If an INSERT statement inserts the value in this column, you get the current number generator value and not the value 0.
Each table may not contain more than one column with the DEFAULT specification DEFAULT SERIAL.
Regards,
Renjith
Edited by: Renjith Michael on Oct 23, 2008 11:34 AM
Similar Messages
-
Module pool- only first line item data saved, rest disappears??
Hi Experts,
I have one module pool that was developed by other developer. It has header details input fields and items details input by table control.
Now below scenarios occur:
1) When I enter only one line item, and save it, the data is saved properly
2) when I enter more than one item data and save it, it only saves first line item data.
3).When I press ENTER button after every new line item data, it saves all the data properly.
I tried to debug the report but could not find the exact problem statement as the code is written very badly without any comments.
I am pasting the flow logic code below for the screen.
So please help me figure out the problem and solution for it.
+++++++++++++++++++++++++++++++++++
PROCESS BEFORE OUTPUT.
*&SPWIZARD: PBO FLOW LOGIC FOR TABLECONTROL 'IT_MSEG'
MODULE it_mseg_change_tc_attr.
*&SPWIZARD: MODULE IT_MSEG_CHANGE_COL_ATTR.
LOOP AT it_gp
INTO wa_gp
WITH CONTROL it_mseg
CURSOR it_mseg-current_line.
MODULE it_mseg_get_lines.
*&SPWIZARD: MODULE IT_MSEG_CHANGE_FIELD_ATTR
ENDLOOP.
* MODULE STATUS_9001.
MODULE deactive_screen.
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'IT_MSEG'
LOOP AT it_gp.
CHAIN.
FIELD wa_gp-yposnr.
FIELD wa_gp-matnr.
FIELD wa_gp-maktx.
FIELD wa_gp-meins MODULE check_uom ON INPUT..
* FIELD WA_GP-DOC_QTY.
* FIELD WA_GP-REC_QTY.
FIELD wa_gp-gp_qty.
FIELD wa_gp-chall_qty.
FIELD wa_gp-netwr.
FIELD wa_gp-remarks.
FIELD wa_gp-exp_ret.
MODULE it_mseg_modify ON CHAIN-REQUEST.
ENDCHAIN.
FIELD wa_gp-chk
MODULE it_mseg_mark ON REQUEST.
ENDLOOP.
MODULE it_mseg_user_command.
*&SPWIZARD: MODULE IT_MSEG_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE IT_MSEG_CHANGE_COL_ATTR.
MODULE user_command_9001.
+++++++++++++++++++++++++++++++++++
Thanks,
Vishal.Hi Aruna,
Below is the code as you required.
+++++++++++++++++++++++++++++
MODULE user_command_9001 INPUT.
ygp_header_mas-ret_type = v_gpt.
CASE sy-ucomm.
WHEN 'MBLNR'.
PERFORM select_mblnr.
WHEN 'DEL'.
PERFORM select_delivery.
WHEN 'INTI'.
PERFORM grt_gi_details.
WHEN 'GENT'.
PERFORM get_ge_details.
WHEN 'GP'.
PERFORM get_returnable_gp.
WHEN 'SAVE'.
PERFORM gen_gp_number.
PERFORM gen_data.
PERFORM save_data.
WHEN OTHERS.
PERFORM get_ge_details_other.
IF it_gp[] IS INITIAL.
INSERT INITIAL LINE INTO it_gp INDEX 1.
ENDIF.
ENDCASE.
IF v_entry = 07 .
PERFORM serial_no1.
PERFORM insert_row.
ENDIF.
IF sy-ucomm IS INITIAL.
PERFORM calc_amt.
ENDIF.
CLEAR:sy-ucomm.
ENDMODULE. "user_command_9001 INPUT
+++++++++++++++++++++++++++++++
MODULE it_mseg_user_command INPUT.
ok_code = sy-ucomm.
PERFORM user_ok_tc USING 'IT_MSEG'
'IT_GP'
'CHK'
CHANGING ok_code.
sy-ucomm = ok_code.
ENDMODULE. "IT_MSEG_USER_COMMAND INPUT
++++++++++++++++++++++++++++++++++
MODULE it_mseg_modify INPUT.
MODIFY it_gp
FROM wa_gp
INDEX it_mseg-current_line.
ENDMODULE. "IT_MSEG_MODIFY INPUT
====> Above module has some problem i think as while debugging it was not updating IT_GP as the current line number was not matching with IT_GP as it has only one line item and WA_GP was changing. Also WA_GP data was getting changed with LOOP with all line items data.
++++++++++++++++++++++++++++++++++++++++++++++
MODULE it_mseg_mark INPUT.
DATA: g_it_mseg_wa2 LIKE LINE OF it_gp.
IF it_mseg-line_sel_mode = 1
AND wa_gp-chk = 'X'.
LOOP AT it_gp INTO g_it_mseg_wa2
WHERE chk = 'X'.
g_it_mseg_wa2-chk = ''.
MODIFY it_gp
FROM g_it_mseg_wa2
TRANSPORTING chk.
ENDLOOP.
ENDIF.
MODIFY it_gp
FROM wa_gp
INDEX it_mseg-current_line
TRANSPORTING chk.
ENDMODULE. "IT_MSEG_MARK INPUT
+++++++++++++++++++++++++++++++++++++++++
If I press ENTER after entering each line item, all records come in IT_GP but if not then only first line item comes. Also if I dont press ENTER after entering the first line item and and add one item (total 2) and then press ENTER then sometimes both the lines disappear.
Thanks,
Vishal -
Creating module pool programming in abap objects
Hello...
I just wanted to know how u create a give modulepool programming in classes and objects.Could anyone tell me the procedure how to do so.And i knew that module pool programming has become obsolete and now everyone are using object oriented concept in module pool programming.soo i want why r they using soo and what is the drawback in using the module pool programming instead of oops concepts.Could anyone give me the clear explanation..Hello Chadipriya,
You can create module pool program for both ABAP and ABAP OO(Object Oriented).
The thing is in OO u have to declare classes,objects and methods.
<b>Procedure oriented approach</b>
1. Emphasis on tasks
2. Large programs are divided into smaller programs known as functions
3. Most of the functions share global data
4. Data move openly around the system from function to function
<b>Object oriented approach</b>
Emphasis on things that does those tasks
Programs are divided into objects
3. Data structures are designed such that they characterized the objects
4. Functions that operate on the data of an object are tied together in the data structure
5. Data can be hidden and cannot be accessed by external functions
6. New data and functions can be easily added whenever necessary
Go to SE80 ---> Select Program ---> Give ur program name and type this code below :-
REPORT YSUBDEL LINE-SIZE 120.
CLASS parentclass DEFINITION .
PUBLIC SECTION.
DATA : commondata(30) type c value 'Accessible to all'.
METHODS : SHOWVAL.
PROTECTED SECTION.
DATA : protectdata(40) type c value 'Protected data'.
private section.
data : privatedata(30) type c value 'Private data'.
ENDCLASS.
CLASS parentclass IMPLEMENTATION.
METHOD : SHOWVAL.
write:/5 'All data from parentclass shown:-'.
write:/ sy-uline.
WRITE:/5 COMMONDATA,
/5 PROTECTDATA,
/5 PRIVATEDATA.
endmethod.
endclass.
CLASS childclass DEFINITION INHERITING FROM parentclass.
PUBLIC SECTION .
METHODS : subval.
ENDCLASS.
CLASS childclass IMPLEMENTATION.
method : subval.
skip 1.
write:/5 'Data of parent shown from child-'.
write:/5 sy-uline.
WRITE:/5 COMMONDATA,
/5 PROTECTDATA.
Commondata = 'Public data changed in subclass'.
Protectdata = 'Protected data changed in subclass'.
write:/5 sy-uline.
WRITE:/5 COMMONDATA,
/5 PROTECTDATA.
endmethod.
endclass.
You r using OOPs concepts in module pool program and not module pool programming instead of oops concepts.
<b>Reward points if helpful</b>
Thanks,
Sachin -
Hello all,
can any one give one simple program for Insert Update Delete
i have taken 9 fields and in a simple screen.
and have 3 button. through this i want to Insert Update and Delete Data in customize table.
Thaks.
Rajesh.* MODULE POOL *
PROGRAM YP_BOOKMASTER_MAINTENANCE MESSAGE-ID ZZ.
* TABLES *
TABLES ZBKMA. "book master table
* VARIABLES *
DATA : V_NUMBER(5) TYPE N, "variable to store random number
V_LINE TYPE I, "variable to get total no of lines
V_FLAG LIKE SY-TABIX. "variable for checking
* INTERNAL TABLE *
* internal table to store book numbers (i.e random numbers)
DATA : BEGIN OF IT_RANDOMNUMBERS OCCURS 0,
BKNUM LIKE ZBKMA-BKNUM, "book number
END OF IT_RANDOMNUMBERS.
* internal table to store only numeric part of book number
* eg : if book no is HUM00100 ,this table will only store 00100
DATA : BEGIN OF IT_NUMBERS OCCURS 0,
NUMBER(5) TYPE N, " a number
END OF IT_NUMBERS.
*internal table to store book details
DATA : BEGIN OF IT_BOOKMASTER OCCURS 0,
BKNUM LIKE ZBKMA-BKNUM, "BOOK NUMBER
BKNAM LIKE ZBKMA-BKNAM, "BOOK NAME
AUTHR LIKE ZBKMA-AUTHR, "AUTHOR
SRCHT LIKE ZBKMA-SRCHT, "SEARCH TERM
PUBSH LIKE ZBKMA-PUBSH, "PUBLISHER
YRPUB LIKE ZBKMA-YRPUB, "YEAR OF PUBLISHING
VERNO LIKE ZBKMA-VERNO, "VERSION NUMBER
DATPR LIKE ZBKMA-DATPR, "DATE OF PURCHASE
BKCOD LIKE ZBKMA-BKCOD, "BOOKCODE
END OF IT_BOOKMASTER .
*& Module STATUS_0090 OUTPUT
* PBO OF SCREEN 090(screen contains three buttons ADD , DELETE , MODIFY)
MODULE STATUS_0090 OUTPUT.
SET PF-STATUS 'BOOKMASTER_FIRST'.
SET TITLEBAR 'BOOKMASTER'.
ENDMODULE. " STATUS_0090 OUTPUT
*& Module USER_COMMAND_0090 INPUT
* PAI OF SCREEN 90
MODULE USER_COMMAND_0090 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN '0'. "go back
WHEN 'EXIT'.
LEAVE PROGRAM. "exit the program
WHEN 'CANCEL'.
leave to screen '0'. "cancel the screen
WHEN 'ADD'.
CLEAR IT_BOOKMASTER. "clears the contents of the fields.
CALL SCREEN '0100'.
WHEN 'DELETE'.
CLEAR IT_BOOKMASTER. "clears the contents of the fields.
CALL SCREEN '0200'.
WHEN 'MODIFY'.
CLEAR IT_BOOKMASTER. "clears the contents of the fields.
CALL SCREEN '0300'.
ENDCASE. "end sy-ucomm
ENDMODULE. " USER_COMMAND_0090 INPUT
*& Module STATUS_0100 OUTPUT
* PBO OF 100 ( ADD THE BOOKS )
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'BOOKMASTER'.
SET TITLEBAR 'UPDATE BOOKMASTER'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* PAI OF 100 ( ADD THE BOOKS )
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM. "check the screen 100 actions
WHEN 'BACK'.
LEAVE TO SCREEN '0'. "go back
WHEN 'EXIT'.
LEAVE PROGRAM. "exit the program
WHEN 'CANCEL'.
LEAVE to screen '0' . "cancel the screen 100
WHEN 'ADD'.
* add the books to the master records
PERFORM FORM_ADDBOOK. " add the
WHEN 'RESET'.
CLEAR IT_BOOKMASTER. "reset the screen
SET SCREEN '0100'.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form FORM_ADDBOOK
* ADDING THE BOOKS
FORM FORM_ADDBOOK .
*TO ASSIGN BOOK NUMBER
PERFORM FORM_ASSIGN_BOOKNO.
* INSERTING THE BOOKS
ZBKMA-BKNAM = IT_BOOKMASTER-BKNAM.
ZBKMA-AUTHR = IT_BOOKMASTER-AUTHR.
ZBKMA-SRCHT = IT_BOOKMASTER-SRCHT.
ZBKMA-PUBSH = IT_BOOKMASTER-PUBSH.
ZBKMA-YRPUB = IT_BOOKMASTER-YRPUB.
ZBKMA-VERNO = IT_BOOKMASTER-VERNO.
ZBKMA-DATPR = IT_BOOKMASTER-DATPR.
ZBKMA-BKCOD = IT_BOOKMASTER-BKCOD.
IF NOT IT_BOOKMASTER-BKNAM IS INITIAL. "if the book number is not initial
INSERT ZBKMA.
ENDIF. "endif check initial
IF SY-SUBRC = 0.
MESSAGE S003(ZCHA) WITH IT_BOOKMASTER-BKNUM.
ENDIF. "endif success
ENDFORM. " FORM_ADDBOOK
*& Form FORM_DELETEBOOK
* delete books from the master data
* --> p1 text
* <-- p2 text
FORM FORM_DELETEBOOK .
* check the it is initial
IF NOT IT_BOOKMASTER-BKNUM IS INITIAL.
*get the book numbers present already
SELECT SINGLE BKNUM
FROM ZBKMA
INTO ZBKMA-BKNUM
WHERE BKNUM = IT_BOOKMASTER-BKNUM.
*check if select is successful
IF SY-SUBRC = 0.
DELETE FROM ZBKMA WHERE BKNUM = IT_BOOKMASTER-BKNUM.
MESSAGE S004(ZCHA) WITH IT_BOOKMASTER-BKNUM. "if book deleted
ELSE.
MESSAGE S005(ZCHA) WITH IT_BOOKMASTER-BKNUM. "if book not found
ENDIF.
ENDIF.
ENDFORM. " FORM_DELETEBOOK
*& Form FORM_MODIFYBOOK
* MODIFING THE BOOK
FORM FORM_MODIFYBOOK.
*validiate the book number
SELECT SINGLE BKNUM
FROM ZBKMA
INTO ZBKMA-BKNUM
WHERE BKNUM = IT_BOOKMASTER-BKNUM.
*check for the success
IF SY-SUBRC NE 0.
MESSAGE S005(ZCHA) WITH IT_BOOKMASTER-BKNUM.
ENDIF.
ZBKMA-BKNUM = IT_BOOKMASTER-BKNUM.
ZBKMA-BKNAM = IT_BOOKMASTER-BKNAM.
ZBKMA-AUTHR = IT_BOOKMASTER-AUTHR.
ZBKMA-SRCHT = IT_BOOKMASTER-SRCHT.
ZBKMA-PUBSH = IT_BOOKMASTER-PUBSH.
ZBKMA-YRPUB = IT_BOOKMASTER-YRPUB.
ZBKMA-VERNO = IT_BOOKMASTER-VERNO.
ZBKMA-DATPR = IT_BOOKMASTER-DATPR.
UPDATE ZBKMA. "update the book master table
IF SY-SUBRC = 0.
MESSAGE S006(ZCHA) WITH IT_BOOKMASTER-BKNUM.
ENDIF.
ENDFORM. " FORM_MODIFYBOOK
*& Form FORM_ASSIGN_BOOKNO
* TEXT
FORM FORM_ASSIGN_BOOKNO .
*select the books already there from bookmaster
SELECT BKNUM
FROM ZBKMA
INTO TABLE IT_RANDOMNUMBERS
WHERE BKCOD = IT_BOOKMASTER-BKCOD.
*if the book is first book i.e. first entry
IF IT_RANDOMNUMBERS[] IS INITIAL.
V_NUMBER = 1. "start with 1
CONCATENATE IT_BOOKMASTER-BKCOD V_NUMBER INTO IT_BOOKMASTER-BKNUM.
ZBKMA-BKNUM = IT_BOOKMASTER-BKNUM. "assign booknumber
EXIT.
ENDIF. "check for initial
CLEAR IT_NUMBERS[]. "clear the temporary table
CLEAR IT_NUMBERS.
* check for the book numbers if there is no book start from first in other
* cases look for first gap and assign that number
LOOP AT IT_RANDOMNUMBERS.
IT_NUMBERS-NUMBER = IT_RANDOMNUMBERS-BKNUM+3(5). "get the last 5 digits
"and store it in it_number
APPEND IT_NUMBERS.
ENDLOOP.
SORT IT_NUMBERS BY NUMBER. "sort
DESCRIBE TABLE IT_NUMBERS LINES V_LINE. "get no. of lines in table
*check for book number gap
LOOP AT IT_NUMBERS.
V_FLAG = SY-TABIX.
* if the book number is not equal to the index of table i.e. some gap in book number
* or only one record
IF IT_NUMBERS-NUMBER NE SY-TABIX OR V_LINE = 1.
V_NUMBER = SY-TABIX. "fill the gap
if v_line = 1. "if only one record
v_number = v_line + 1. "increment the book number
endif. "only one record check
CONCATENATE IT_BOOKMASTER-BKCOD V_NUMBER INTO IT_BOOKMASTER-BKNUM.
ZBKMA-BKNUM = IT_BOOKMASTER-BKNUM. "assign
EXIT.
ENDIF. "check for gap
*if no gap in book number assign next number
IF V_FLAG = V_LINE.
V_NUMBER = IT_NUMBERS-NUMBER + 1.
CONCATENATE IT_BOOKMASTER-BKCOD V_NUMBER INTO IT_BOOKMASTER-BKNUM.
ZBKMA-BKNUM = IT_BOOKMASTER-BKNUM.
EXIT.
ENDIF. "book number increment
ENDLOOP. "check number gap
ENDFORM. " FORM_ASSIGN_BOOKNO
*& Module STATUS_0200 OUTPUT
* PBO OF SCREEN 200 ( DELETE BOOKS)
MODULE STATUS_0200 OUTPUT.
SET PF-STATUS 'DELETE'.
SET TITLEBAR 'DELETE'.
ENDMODULE. " STATUS_0200 OUTPUT
*& Module USER_COMMAND_0200 INPUT
* PAI OF SCREEN 200 (DELETE BOOKS)
MODULE USER_COMMAND_0200 INPUT.
CASE SY-UCOMM. "check for screen 200 actions
WHEN 'BACK'.
LEAVE TO SCREEN '0'. "go back
WHEN 'EXIT'.
LEAVE PROGRAM. "leave program
WHEN 'CANCEL'.
LEAVE to screen '0'. "cancel screen
WHEN 'DELETE'.
* delete the book from master data
PERFORM FORM_DELETEBOOK.
WHEN 'RESET'. "reset the screen
CLEAR IT_BOOKMASTER.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Module STATUS_0300 OUTPUT
* PBO OF SCREEN 300 ( FOR MODIFYING )
MODULE STATUS_0300 OUTPUT.
SET PF-STATUS 'MODIFY'.
SET TITLEBAR 'MODIFY'.
ENDMODULE. " STATUS_0300 OUTPUT
*& Module USER_COMMAND_0300 INPUT
* text
MODULE USER_COMMAND_0300 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN '0'.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN '0'.
WHEN 'MODIFY'.
PERFORM FORM_MODIFYBOOK. "update the record
WHEN 'RESET'.
CLEAR IT_BOOKMASTER. "screen reset
ENDCASE.
ENDMODULE. " USER_COMMAND_0300 INPUT
*& Module MODULE_CANCEL INPUT
* ACTIONS AT EXIT COMMAND
MODULE MODULE_CANCEL INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN '0'.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " MODULE_CANCEL INPUT
Message was edited by: Chandrasekhar Jagarlamudi -
How to write module pool program
hai,
what is the module -pool program ?
what are the procedures to write the module-pool program.
plz give the simple program for module-pool programs?
regards
surenderHi
This component though is not attached to the screen painter, plays important role in transaction. Normally, for reports, on line executable programs are written but for transaction, Module Pool Programs are written. The module pool program contains only modules to handle various events associated with screen and data declaration statements.
System divides the module pool program into several include program. These are global field, PBO modules, and PAI modules. It is entirely users decision whether to use these modules or write directly into main program.
Creation of Module Pool Program
You can create module pool program either through
Object browser
System automatically creates the module pool program and for these program which are created through object browser, system creates the include modules.
Or
ABAP/4 editor
It is similar to normal program creation. Type of program should be given M and is not created by system.
Communication between Dynpro and Module Program
For each screen, the system executes the flow logic, which contains corresponding events. The control is passed to Module Pool Program. Module Pool Program handles the code for these events and again passes back control to the flow logic and finally to screen. Unlike on line program, in this case, the control remains with flow logic. The switching of control between flow logic and module pool program and back is common process when user executes transaction.
Creation of a Complete Transaction
Steps involved to create a complete transaction
Create module pool program.
From screen painter create screens.
Write flow logic for each screen.
Write code for all the events in module pool program.
Check for any error in screen and flow logic.
Generate each and every component of screen i.e. flow logic and screen.
Single screen can be tested using Screen Painter.
Create transaction code through object browser.
Generate the transaction code.
User can execute the transaction by entering the transaction code in the command field.
Handling Function Code
The function code or OKCODE is the last field of Field list. Function code can be handled as follows:
During the Designing of the screen, a function code is assigned to pushbutton.
In field list, developer needs to specify OKCODE as last field.
In module program it is a global field and can be evaluated in the PAI event.
A function code is treated in the same way, regardless it comes from pushbutton, menu item or any other GUI element.
When the user clicks on the Display button, you want to display details of sflight, with corresponding carrid and connid (which is entered by the user).
Module pool program to handle this particular screen is as follows:
Program YVTEST7.
TABLES: SFLIGHT.
DATA: OKCODE (4).
MODULE INPUT1 INPUT,
CASE OKCODE.
WHEN DISP.
SELECT * FROM SFLIGHT
WHERE CARRID = SFLIGHT CARRID AND
CONNID = SFLIGHT CONNID.
ENDSELECT.
LEAVE TO SCREEN 200.
WHEN EXIT. LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. INPUT1 INPUT
MODULE USER_COMMAND_0200 INPUT.
CASE OKCODE.
WHEN BACK. LEAVE TO SCREEN 100.
ENDCASE.
ENDMODULE. USER_COMMAND_0200 INPUT
When the user clicks on display, control is transferred to screen no. 200 on which you display sflight details & on the same screen, when user clicks on BACK button, he comes back to main screen.
Flow logic for screen 100 is as follows:
PROCESS AFTER INPUT.
MODULE INPUT.
Flow logic for screen 200
PROCESS AFTER INPUT.
USER_COMMAND_0200.
MODULES: Modules are handled in module pool program.
You need to write flow logic for screen 200 and design screen 200.
In case of transaction transfer of data from program to screen is automatic i.e. you need not transfer the data from program to screen explicitly. The fields, which you define in the screen receives the data from program and displays the same.
The Field Checks
As already mentioned Transaction is the only method, which SAP recommends to update the database tables. Data entered in the database table should be valid and correct. Data entered is validated at each and every point. ABAP/4 offers various methods to validate data and those are as follows:
Automatic field checks
Checks performed in the flow logic
Checks performed in the ABAP/4 module pool program
Automatic Field Checks
These checks are based on the field information stored in the dictionary. These checks are performed by the system automatically when the user enters the data for the screen field. System performs these checks before PAI event is triggered. Types of field checks performed by system are as follows:
Required input
While designing the screen, for particular screen field if you click the Req. Entry checkbox, the field becomes mandatory. When the transaction is executed if user leaves this particular field blank, the system displays error message. User cannot proceed until the user enters some data.
Proper Data Format
Each field has its own data format whether it is table field or screen field. Whenever data is entered, system checks for the proper format of the data. For example date. Each user has its own format for date, which is defined in the user master record. If the date defined in the user master record is in the format DD/MM/YYYY, if the user enters the date, say, in YY/DD/MM, the user displays the error message. System also checks for the value of month or days. For example if month entered is greater than twelve then the error message is displayed.
Valid Value for the Field
In data dictionary two tables are related by Primary key-Foreign key relationship. Whenever the user enters the data, the system checks for the check table values. Also in Domain, if you have fixed values, then the system checks for these values.
Automatic field checks are repeated each time the user enters the data.
About at Exit Command
Automatic field checks can be avoided by AT EXIT-COMMAND, which works exactly the same way as Cancel works on application tools bar. In the R/3 screen, if you want to quit the processing of that particular screen without entering the mandatory fields, user can click the Cancel button. Same functionality can be incorporated in the user-defined transaction by using AT EXIT-COMMAND. This module can be called before the system executes the automatic field checks and it goes without saying that before PAI event. Code for AT EXIT-COMMAND in flow logic and in module pool program can be written as follows:
In Flow Logic
Process After Input.
Module exit AT EXIT-COMMAND.
In module pool program.
Module exit.
Case okcode.
When Exit.
Leave to screen 0.
To achieve this kind of functionality a pushbutton or menu item should be assigned a function type E. It tells the system to process this particular module before carrying out any field checks.
Flow Logic Validations
Consider the case where you want user to enter only LH and SQ for sflight-carrid. In this case, you are restricting value of a screen field. This cannot be achieved by automatic field check. Hence there is a need of additional validation. It can be done in flow logic by using following statement:
Field -
Values
Syntax
PAI.
Field sflight-carrid values (LH).
For multiple values
PAI.
Field sflight-carrid values (LH SQ).
Field sflight-price values (between 1000 and 2000).
In this case when the user enters the value, PAI is triggered and field is checked for that particular value. If the value entered happens to be wrong, that field is enabled for user to enter. If you have multiple Field statements in your flow logic, it is sequential execution.
Consider the following case:
PAI.
Module assign.
Field sflight-carrid values (LH SQ).
In ABAP/4
Module assign.
Data: carrid1 like sflight-carrid.
Carrid1 = sflight-carrid.
Endmodule.
In this case, Sflight-carrid is used in the flow logic before the field statement. The system will give invalid value or some previous value as the field sflight-carrid is used in module before it is checked i.e., field statement is after the module in which sflight-carrid is being used. The field is not available to the system unless it executes the field statement. Field statement transfers the values to the program and is done only once. If you dont have Field statement in your flow logic, transfer of values takes place in PAI event.
Consider one more case where you have multiple field statement
PAI.
Field Sflight-carrid values (LH).
Field Sflight-connid values (0400 0500).
In this case if the user enters only carrid wrong, then this particular field is enabled and rest of the fields are disabled for user to input. Many times if the user enters wrong value for one field, then you might want to give option to user to enter all the fields, which is not possible by using Field statement only. This functionality can be achieved by CHAIN ENDCHAIN.
Syntax
Chain.
Field sflight-carrid value (LH).
Field sflight-connid values (between 200 and 500).
Endchain.
Field sflight-price values (100 1000).
In this case, if the user enters wrong value only for carrid, both the fields i.e. carrid and connid are enabled as they are grouped together in the Chain statement. The field price will be disabled for input. Usually, logically related fields are grouped together with Chain-Endchain statement.
Module Pool Program Validations
Checking fields ABAP/4 program includes
Field statement in flow logic.
Module statement in ABAP/4 module pool Program.
Syntax
PAI.
Field sflight-carrid module <name>.
This module can be handled in the main program i.e. module pool program.
In ABAP/4 program
Module Check.
Select single * from sflight where carrid = sflight-carrid.
If sy-subrc ne 0.
Message e001.
Endif.
In this case, field sflight-carrid is checked in the table for its existence.
Dynamically Calling the Screens
About Displaying Next Screen
Transaction is a sequence of screens, which are displayed one after the other. The next screen displayed depends upon the attributes of first screen. In attributes you need to give Next Screen number i.e. if next screen displayed should be 200 screen, then this number should be given in next Screen attributes. These are static attributes of the screen. By default, if nothing is specified in the program, the system branches out to the screen number, which is specified in the attribute screen.
In this case, if user selects MARA pushbutton, then fields from Mara table are displayed. When the user clicks on the MARD, then the fields from MARD table are displayed. Depending upon users selection, the screen is branched out and this has to be done during runtime. This functionality can be achieved by dynamically calling the screen in module pool program.
The screen can branch out to new screen depending upon user selection. Following command in module pool program can do this:
SET SCREEM
CALL SCREEN
LEAVE TO SCREEN <NUMBER>
All these commands override the specifications given in the attributes. This overriding is temporary. The values stored in the attribute are not changed.
Set Screen
Syntax
Set screen <number>.
In module pool program
Case okcode.
When DISP.
Set screen 200.
When LIST.
Set screen 300.
Endcase.
In this case, the entire processing of current screen takes place and then the system branches out to next screen. If you want to branch out to the next screen without processing the current screen, LEAVE SCREEN should be used along with the SET SCREEN.
For Example:
Case okcode..
When DISP.
Set screen 200.
Leave Screen.
When LIST.
Set screen 300.
Leave Screen.
Endcase.
When SET SCREEN is used, control cannot be transferred to the main screen or previous screen, unless you write code for the same.
Call Screen
Usually used for pop up screens. Many times, there is a need for user to enter additional information or secondary information on another screen or pop up screen. Once the user enters the data, he should be able to go back to main screen or to the screen where he started. This is not possible by using SET SCREEN. CALL SCREEN achieves this functionality.
Syntax
Call Screen 200.
Will simply call a screen number 200 from a main screen. Once the screen is displayed the user can enter all the data and return to the main screen by clicking BACK button.
To call screen as pop up screen the syntax is
Call screen starting at <col.no.> <line no>
Ending at <col no> <line no>.
In this case window will be popped as window and user can close it by using BACK button.
Leave to screen
To SET a new screen without processing current screen, you need to use the following two statements together:
SET SCREEN 200.
LEAVE SCREEN.
Or a Single statement
LEAVE TO SCREEN 200. -
How to delete the row in table control with respect to one field in module pool programming?
Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MSHI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'.
LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
APPEND LS_SOURCE TO LT_RESTORE.
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
SOURCE-LINES = SOURCE-LINES - 1.
ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field. -
Getting error while calling a subscreen in module pool program
HI ALL,
ACTUALLY I'M GETTING A SYNTAX ERROR WHILE I'M CALLING A SUBSCREEN
IN A MODULE POOL PROGRAM IN PAI MODULE
THE ERROR IS AS FOLLOW
"." or "ID ... FIELD ..." expected after "SUBSCREEN"
CAN ANYBODY PLS HELP ME.
REGARDS
ANDREWSHI MAX ,
THE CODE IS AS FOLLOWS:
*& Report ZTABSTRIP_PS
REPORT ZTABSTRIP_PS.
type-pools : vrm.
DATA:number1 type I,
number2 type I,
result type I,
ok_code like SY-UCOMM,
employee1 type c,
ABAP(19) type c,
SALES(19) type c,
HR(19) type c,
MM(19) type c,
employee type c.
emp type c.
CONTROLS tabstrip TYPE TABSTRIP.
CALL SCREEN 100.
call screen 110.
call screen 130.
call screen 120.
call screen 140.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
CASE OK_CODE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
when 'TAB1'.
tabstrip-activetab = 'TAB1'.
when 'TAB2'.
tabstrip-activetab = 'TAB2'.
result = number1 + number2.
when 'TAB3'.
tabstrip-activetab = 'TAB3'.
SET TITLEBAR 'TITLE1'.
when 'TAB4'.
tabstrip-activetab = 'TAB4'.
if employee = 'NEERAJ'.
ABAP = 'NEERAJ'.
elseif employee = 'UMESH'.
SALES = 'UMESH'.
ELSEIF employee = 'RAM'.
HR = 'RAM'.
elseif employee = 'ANIL'.
MM = 'ANIL'.
endif.
employee = employee.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
ENDCASE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program .
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0110 OUTPUT
text
**MODULE STATUS_0110 OUTPUT.
SET PF-STATUS 'STATUS1'.
SET TITLEBAR 'xxx'.
**case ok_code.
**WHEN 'back' or 'exit' or 'delete'.
leave PROGRAM.
WHEN 'save'.
MESSAGE 'please choose a valid function ' TYPE 'W'.
ENDCASE.
**ENDMODULE. " STATUS_0110 OUTPUT
*& Module USER_COMMAND_0110 INPUT
text
MODULE USER_COMMAND_0110 INPUT.
number1 = number1.
number2 = number2.
CLEAR NUMBER1.
CLEAR NUMBER2.
REFRESH NUMBER1.
REFRESH NUMBER2.
ENDMODULE. " USER_COMMAND_0110 INPUT
*& Module STATUS_0130 OUTPUT
text
MODULE STATUS_0130 OUTPUT.
SET PF-STATUS 'STATUS2'.
SET TITLEBAR 'xxx'.
RESULT = number1 + number2.
*CLEAR RESULT.
REFRESH RESULT.
ENDMODULE. " STATUS_0130 OUTPUT
*& Module STATUS_0120 OUTPUT
text
MODULE STATUS_0120 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values,
l_value LIKE LINE OF li_list.
l_value-key = '1'.
l_value-text = 'ANIL'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '2'.
l_value-text = 'RAM'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '3'.
l_value-text = 'NEERAJ'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '4'.
l_value-text = 'UMESH'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_name = 'employee'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
ID = l_name
VALUES = li_list
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR li_list.
ENDMODULE. " STATUS_0120 OUTPUT
*& Module USER_COMMAND_0120 INPUT
text
MODULE USER_COMMAND_0120 INPUT.
INCLUDING sy-repid '140'.
employee1 = employee.
IF employee1 CS 'NEERAJ'.
call SUBSCREEN sub4 .
ABAP = 'NEERAJ'.
CLEAR ABAP.
ELSEIF employee1 CS 'UMESH'.
call SUBSCREEN sub4 .
SALES = 'UMESH'.
CLEAR SALES.
elseif employee1 CS 'RAM'.
call SUBSCREEN sub4 .
HR = 'RAM'.
CLEAR HR.
ELSEIF employee1 CS 'ANIL'.
call SUBSCREEN sub4 .
MM = 'ANIL'.
CLEAR MM.
endif.
ENDMODULE. " USER_COMMAND_0120 INPUT
*& Module STATUS_0140 OUTPUT
text
MODULE STATUS_0140 OUTPUT.
*CASE OK_CODE.
WHEN employee1 'NEERAJ'.
screen-active = 1.
ABAP = 'NEERAJ'.
WHEN employee1 = 'UMESH'.
screen-active = 1.
SALES = 'UMESH'.
WHEN employee1 = 'RAM'.
screen-active = 1.
HR = 'RAM'.
WHEN employee1 = 'ANIL'.
screen-active = 1.
MM = 'ANIL'.
endif.
*ENDCASE.
ENDMODULE. " STATUS_0140 OUTPUT -
How to call a "Z"module pool program in a "z"report
Hi Guys,
I have two reports .
1. Report : uploads a tab delimited " .Txt1" file and update the "z1" table
".TXT1" : File contains 4 fields
2. Module pool. :Uploads a a tab delimited " .Txt2" file and update another "z2" table
".TXT2" file contains the 4 fileds of ".TXT1" and also 2 extra fields.
I want to merge (call) the module pool program in the Report and perform the upload function using only one ".TXT" file.Please do guide me precisely .
*Report:*
REPORT zrswbgcs009 NO STANDARD PAGE HEADING MESSAGE-ID zwb
LINE-SIZE 185.
TABLES: zgcs_foc. "FOC Parts Table
*data count buffer
DATA: read_cnt(6) TYPE p, "Find read record
update_cnt(6) TYPE p, "OK record
error_cnt(6) TYPE p. "Error record
*file buffer(FOC)
DATA: BEGIN OF FOC_inrec OCCURS 0,
CUSTOMER(10), "Customer
PART_CODE(18), "Parts Code
REF_NO(35), "Ref No.
REF_DATE(10), "Ref Date
QTY(12), "Parts Qty
TEXT(100), "Remark
END OF FOC_inrec.
*file buffer
DATA: BEGIN OF inrec OCCURS 0,
CUSTOMER(10), "Customer
PART_CODE(18), "Parts Code
REF_NO(35), "Ref No.
REF_DATE(10), "Ref Date
QTY(12), "Parts Qty
PRICE(15), "Parts Price
WAERK(5), "Parts Currency
TEXT(100), "Remark
END OF inrec.
DATA : v_file LIKE rlgrap-filename.
DATA gt_zgcs_foc LIKE zgcs_foc OCCURS 0 WITH HEADER LINE.
DATA gs_zgcs_foc LIKE zgcs_foc.
*File name ACCEPT--------------------------------------------------
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
*Company code
PARAMETERS: p_comp LIKE zgcs_imei-company OBLIGATORY.
PARAMETERS: pcfile LIKE rlgrap-filename OBLIGATORY LOWER CASE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
PARAMETERS: HQfile RADIOBUTTON GROUP b2.
SELECTION-SCREEN COMMENT 7(20) text-101 FOR FIELD HQfile.
SELECTION-SCREEN POSITION 31.
PARAMETERS: SUBfile RADIOBUTTON GROUP b2.
SELECTION-SCREEN COMMENT 37(20) text-102 FOR FIELD SUBfile.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK box WITH FRAME.
SELECTION-SCREEN: COMMENT /2(40) text-011, COMMENT 42(40) text-001,
ULINE,
COMMENT /2(40) text-012, COMMENT 42(40) text-002,
COMMENT /2(40) text-013, COMMENT 42(40) text-003,
COMMENT /2(40) text-014, COMMENT 42(40) text-004,
COMMENT /2(40) text-015, COMMENT 42(40) text-005,
COMMENT /2(40) text-016, COMMENT 42(40) text-006,
COMMENT /2(40) text-017, COMMENT 42(40) text-007,
COMMENT /2(40) text-018, COMMENT 42(40) text-008,
COMMENT /42(40) text-009.
SELECTION-SCREEN END OF BLOCK box.
* -- AT SELECTION SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pcfile.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = space
def_path = 'C:\'
mask = ',*.txt,*.TXT.'
mode = 'O'
title = ' '
IMPORTING
filename = pcfile
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
*-----------------------------start--------------------------------
START-OF-SELECTION.
CLEAR: read_cnt, update_cnt, error_cnt.
REFRESH gt_zgcs_foc. CLEAR gs_zgcs_foc.
PERFORM file_upload_from_pc.
SORT gt_zgcs_foc.
DELETE ADJACENT DUPLICATES FROM gt_zgcs_foc
COMPARING COMPANY CUSTOMER PART_CODE REF_NO REF_DATE.
*// customer code check
DATA: LT_ZESTD LIKE ZESTD OCCURS 0 WITH HEADER LINE.
IF NOT gt_zgcs_foc[] IS INITIAL.
SELECT COMPANY CUSTOMER CURRENCY
INTO CORRESPONDING FIELDS OF TABLE LT_ZESTD
FROM ZESTD
FOR ALL ENTRIES IN gt_zgcs_foc
WHERE COMPANY = gt_zgcs_foc-COMPANY
AND CUSTOMER = gt_zgcs_foc-CUSTOMER.
ENDIF.
SORT LT_ZESTD BY COMPANY CUSTOMER.
*// part code check
DATA: LT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
IF NOT gt_zgcs_foc[] IS INITIAL.
SELECT *
INTO TABLE LT_MARA
FROM MARA
FOR ALL ENTRIES IN gt_zgcs_foc
WHERE MATNR = gt_zgcs_foc-PART_CODE.
ENDIF.
SORT LT_MARA BY MATNR.
LOOP AT gt_zgcs_foc.
*// customer code check
READ TABLE LT_ZESTD WITH KEY
COMPANY = gt_zgcs_foc-COMPANY
CUSTOMER = gt_zgcs_foc-CUSTOMER.
IF SY-SUBRC <> 0.
WRITE:/'Invalid Customer code ',
gt_zgcs_foc-COMPANY, ' ',
gt_zgcs_foc-CUSTOMER.
STOP.
ENDIF.
*// part code check
READ TABLE LT_MARA WITH KEY MATNR = gt_zgcs_foc-PART_CODE
BINARY SEARCH.
IF SY-SUBRC <> 0.
WRITE:/ 'Invalid part code ', gt_zgcs_foc-PART_CODE.
STOP.
ENDIF.
*// REF_NO
TRANSLATE gt_zgcs_foc-REF_NO TO UPPER CASE.
SHIFT gt_zgcs_foc-REF_NO LEFT DELETING LEADING SPACE.
IF gt_zgcs_foc-REF_NO = SPACE.
WRITE:/'Ref No. is blank'.
STOP.
ENDIF.
*// REF_DATE
IF gt_zgcs_foc-REF_DATE = 0.
WRITE:/'Invalid Ref Date'.
STOP.
ENDIF.
*// QTY
* IF gt_zgcs_foc-QTY CO ' 0123456789'.
* ELSE.
* WRITE:/ gt_zgcs_foc-QTY, ' Invalid Qty value'.
* STOP.
* ENDIF.
ENDLOOP.
* Insert/Update table
* MODIFY zgcs_foc FROM TABLE gt_zgcs_foc.
INSERT zgcs_foc FROM TABLE gt_zgcs_foc.
IF sy-subrc EQ 0.
COMMIT WORK.
DESCRIBE TABLE gt_zgcs_foc LINES update_cnt.
error_cnt = read_cnt - update_cnt.
ELSE.
ROLLBACK WORK.
error_cnt = read_cnt - update_cnt.
ENDIF.
ULINE.
FORMAT COLOR 3.
WRITE: / 'Read count :', read_cnt.
WRITE: / 'Insert/Update count :', update_cnt.
WRITE: / 'Error count :', error_cnt.
FORMAT COLOR OFF.
*end-of-selection--------------------------------------------------
END-OF-SELECTION.
*& Form FILE_UPLOAD_FROM_PC
FORM file_upload_from_pc.
IF pcfile IS INITIAL.
WRITE: / 'SELECT UPLOAD FILE !'.
ELSE.
MOVE pcfile TO v_file.
* HQ file upload
IF HQfile EQ 'X'.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = v_file
filetype = 'DAT'
TABLES
data_tab = FOC_inrec
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
WRITE: / 'FILE UPLOAD :', sy-subrc.
ENDIF.
LOOP AT FOC_inrec.
ADD 1 TO read_cnt.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-customer
importing
output = FOC_inrec-customer.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-part_code
importing
output = FOC_inrec-part_code.
MOVE-CORRESPONDING FOC_inrec TO gs_zgcs_foc.
MOVE p_comp TO gs_zgcs_foc-company.
MOVE gs_zgcs_foc-qty TO gs_zgcs_foc-balan.
MOVE sy-uname TO gs_zgcs_foc-ERNAM.
MOVE sy-datum TO gs_zgcs_foc-ERDAT.
MOVE sy-UZEIT TO gs_zgcs_foc-ERZET.
* Source(1:HQ,2:SUB,0:Etc)
MOVE '1' TO gs_zgcs_foc-source.
APPEND gs_zgcs_foc TO gt_zgcs_foc.
ENDLOOP.
* SGE file upload
ELSE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = v_file
filetype = 'DAT'
TABLES
data_tab = inrec
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
WRITE: / 'FILE UPLOAD :', sy-subrc.
ENDIF.
LOOP AT inrec.
ADD 1 TO read_cnt.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = inrec-customer
importing
output = inrec-customer.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-part_code
importing
output = FOC_inrec-part_code.
MOVE-CORRESPONDING inrec TO gs_zgcs_foc.
MOVE p_comp TO gs_zgcs_foc-company.
MOVE gs_zgcs_foc-qty TO gs_zgcs_foc-balan.
MOVE sy-uname TO gs_zgcs_foc-ERNAM.
MOVE sy-datum TO gs_zgcs_foc-ERDAT.
MOVE sy-UZEIT TO gs_zgcs_foc-ERZET.
* Source(1:HQ,2:SUB,0:Etc)
MOVE '2' TO gs_zgcs_foc-source.
APPEND gs_zgcs_foc TO gt_zgcs_foc.
ENDLOOP.
ENDIF.
ENDIF.
ENDFORM.
*MODULE POOL::*
*& Module Name : Warranty Bill
*& Sub-Module : W/B
*& Description : Parts Q'ty Adjust(Sales & Warranty)
*& Program Name : ZRSWBP004
*& History
*& Date Author Reason
*& 2007.05.08 Song, Ji-Hyun Initial Coding Req.by WH.Song
*& Logic Process
* - CONDITIONS
* Company, Customer, Material
* - PROCESS
* Display,Insert,Update data in the T/B ZESP04
REPORT zrswbp004 NO STANDARD PAGE HEADING
MESSAGE-ID 00
LINE-SIZE 250
LINE-COUNT 50.
* G L O B A L V A R I A B L E S *
TABLES : zesp04.
DATA : BEGIN OF itab_list OCCURS 0,
company LIKE zesp04-company,
customer LIKE zesp04-customer,
material LIKE zesp04-material,
adj_date LIKE zesp04-adj_date,
adjust LIKE zesp04-adjust,
reason LIKE zesp04-reason,
reason_code LIKE zesp04-reason_code,
doc_no LIKE zesp04-doc_no,
in_date LIKE zesp04-in_date,
create_id LIKE zesp04-create_id,
END OF itab_list.
DATA : itab_upload LIKE TABLE OF zesp04 WITH HEADER LINE.
DATA : s_mode(10).
DATA : table_name(10) VALUE 'ZESP04'.
DATA : tot_cnt TYPE i.
DATA : ref_flag(1).
* M A C R O D E F I N E *
DEFINE conversion_kunnr.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = &1
importing
output = &1.
END-OF-DEFINITION.
DEFINE conversion_material.
call function 'CONVERSION_EXIT_MATN1_INPUT'
exporting
input = &1
importing
output = &1.
END-OF-DEFINITION.
* S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE title1.
PARAMETERS : company LIKE zesp04-company MEMORY ID buk MODIF ID v1
OBLIGATORY.
SELECT-OPTIONS : customer FOR zesp04-customer MEMORY ID kun
MODIF ID v1.
SELECT-OPTIONS : material FOR zesp04-material MEMORY ID mat
MODIF ID v1.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 3.
SELECTION-SCREEN COMMENT 3(12) text-002 MODIF ID v2.
PARAMETERS : up_flag AS CHECKBOX MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(12) text-001 MODIF ID v2.
PARAMETERS : p_fname(300) LOWER CASE MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE title2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(53) text-003 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(10) text-004 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(12) text-005 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(12) text-006 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(15) text-007 MODIF ID v2.
PARAMETERS : df1 TYPE c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN COMMENT 24(13) text-012 MODIF ID v2.
PARAMETERS : df2 TYPE c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN COMMENT 41(11) text-013 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(14) text-008 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(11) text-009 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(14) text-010 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(10) text-011 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
INCLUDE zrswbp004_pbo.
INCLUDE zrswbp004_pai.
INITIALIZATION.
title1 = ' Parts Quantity Adjustment '.
title2 = ' Text File Layout '.
* S T A R T O F S E L E C T I O N *
TOP-OF-PAGE.
PERFORM write_header.
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM write_header.
START-OF-SELECTION.
IF up_flag = 'X'.
PERFORM upload_data.
ELSE.
PERFORM select_data.
SET PF-STATUS 'PF01' EXCLUDING 'SAVE'.
PERFORM display_data.
ENDIF.
AT USER-COMMAND.
PERFORM user_command.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
PERFORM get_filename.
*& Form SELECT_DATA
* Select Data for Display
FORM select_data.
SELECT * FROM (table_name)
INTO CORRESPONDING FIELDS OF TABLE itab_list
WHERE company = company
AND customer IN customer
AND material IN material.
CHECK sy-subrc <> 0.
WRITE: 'No data found with your option.'.
ENDFORM. " SELECT_DATA
*& Form DISPLAY_DATA
* Display Data following Condition
FORM display_data.
LOOP AT itab_list.
FORMAT COLOR 2 INTENSIFIED.
WRITE : / '|' NO-GAP.
WRITE : (07) itab_list-company CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-customer CENTERED NO-GAP, '|' NO-GAP,
(20) itab_list-material CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-adj_date CENTERED NO-GAP, '|' NO-GAP,
(15) itab_list-adjust RIGHT-JUSTIFIED NO-GAP, '|'
NO-GAP,
(55) itab_list-reason LEFT-JUSTIFIED NO-GAP, '|' NO-GAP,
(11) itab_list-reason_code CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-doc_no CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-in_date CENTERED NO-GAP, '|' NO-GAP,
(12) itab_list-create_id CENTERED NO-GAP, '|' NO-GAP.
FORMAT INTENSIFIED OFF.
HIDE itab_list.
ENDLOOP.
WRITE : / sy-uline(171).
ENDFORM. " DISPLAY_DATA
*& Form WRITE_HEADER
* Write Report Header
FORM write_header.
DATA : line(1024).
CLEAR line WITH '-'.
DESCRIBE TABLE itab_list LINES tot_cnt.
FORMAT INTENSIFIED ON.
WRITE : 15 'Parts Quantity Adjustment'.
SKIP.
WRITE : / 'Total Count : ', tot_cnt.
WRITE : /.
WRITE : (171) sy-uline.
WRITE : / '|' NO-GAP.
WRITE : (07) 'Company' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Customer' CENTERED NO-GAP, '|' NO-GAP,
(20) 'Material' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Adj. Date' CENTERED NO-GAP, '|' NO-GAP,
(15) 'Adjust' CENTERED NO-GAP, '|' NO-GAP,
(55) 'Reason' CENTERED NO-GAP, '|' NO-GAP,
(11) 'Reason Code' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Doc No' CENTERED NO-GAP, '|' NO-GAP,
(10) 'IN DATE' CENTERED NO-GAP, '|' NO-GAP,
(12) 'CREATE ID' CENTERED NO-GAP, '|' NO-GAP.
WRITE : /(171) sy-uline.
FORMAT INTENSIFIED OFF.
ENDFORM. " WRITE_HEADER
*& Form UPLOAD_DATA
* Data Upload from File
FORM upload_data.
DATA : l_filename LIKE rlgrap-filename,
temp_dateformat TYPE dateformat.
IF df1 = 'X'.
temp_dateformat = 'YYYY.MM.DD'.
ELSE.
temp_dateformat = 'DD.MM.YYYY'.
ENDIF.
MOVE p_fname TO l_filename.
CHECK l_filename NE space.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = l_filename
filetype = 'DAT'
dat_d_format = temp_dateformat
TABLES
data_tab = itab_list
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9.
IF sy-subrc NE 0.
MESSAGE s000 WITH 'File upload is failed!'.
STOP.
ELSE.
CLEAR : itab_upload, itab_upload[].
LOOP AT itab_list.
MOVE-CORRESPONDING itab_list TO itab_upload.
conversion_kunnr itab_upload-customer.
conversion_material itab_upload-material.
itab_upload-mandt = sy-mandt.
itab_upload-in_date = sy-datum.
itab_upload-create_id = sy-uname.
*>>>>Insert by GSCHOI 2007.11.08
IF itab_list-adj_date+0(6) NE sy-datum+0(6).
MESSAGE i368 WITH 'Adjust month must same as current month!'.
ROLLBACK WORK.
STOP.
ENDIF.
*<<<<End
APPEND itab_upload.
INSERT INTO (table_name) VALUES itab_upload.
IF sy-subrc EQ 0.
CONTINUE.
ELSEIF sy-subrc EQ 4.
MESSAGE s368 WITH 'Duplicated Data Error!'.
ROLLBACK WORK.
STOP.
ELSE.
MESSAGE s368 WITH 'File Error!'.
ROLLBACK WORK.
STOP.
ENDIF.
ENDLOOP.
ENDIF.
IF sy-subrc EQ 0.
MESSAGE s368 WITH 'Uploaded Successfully!'.
ENDIF.
ENDFORM. " UPLOAD_DATA
*& Form USER_COMMAND
* User Command Execution in Screen 1000
FORM user_command.
MOVE-CORRESPONDING itab_list TO zesp04.
CASE sy-ucomm.
WHEN 'INSERT'.
PERFORM insert_item.
WHEN 'UPDATE'.
PERFORM update_item.
WHEN 'DISPLAY'.
PERFORM display_item.
WHEN 'REFRESH'.
PERFORM refresh_list.
ENDCASE.
IF ref_flag = 'Y'.
PERFORM refresh_list.
CLEAR ref_flag.
ENDIF.
ENDFORM. " USER_COMMAND
*& Form INSERT_ITEM
* When Clicking Insert Button
FORM insert_item.
CLEAR : s_mode.
CLEAR : zesp04.
s_mode = 'INSERT'.
CALL SCREEN '100'.
ENDFORM. " INSERT_ITEM
*& Form UPDATE_ITEM
* When Clicking Update Button
FORM update_item.
CLEAR : s_mode.
s_mode = 'UPDATE'.
CALL SCREEN '100'.
ENDFORM. " UPDATE_ITEM
*& Form DISPLAY_ITEM
* When Clicking Display Button
FORM display_item.
CLEAR : s_mode.
s_mode = 'DISPLAY'.
CALL SCREEN '100'.
ENDFORM. " DISPLAY_ITEM
*& Form REFRESH_LIST
* When Clicking Refresh Button or Returning Display Screen
FORM refresh_list.
CLEAR : itab_list, itab_list[].
PERFORM select_data.
sy-lsind = sy-lsind - 1.
PERFORM display_data.
ENDFORM. " REFRESH_LIST
*& Form GET_FILENAME
* Get Filename
FORM get_filename.
DATA: l_fname LIKE ibipparms-path .
DATA : p_name LIKE sy-repid.
p_name = sy-repid.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = p_name
dynpro_number = sy-dynnr
field_name = ''
IMPORTING
file_name = l_fname.
p_fname = l_fname.
ENDFORM. " GET_FILENAME
Edited by: Matt on Nov 24, 2008 11:24 AM - surrounded the ABAP with tagsHi,
Use SUBMIT statement in your first Report zrswbgcs009 at the end, to call the Modulepool program zrswbp004.
do a search in SDN you will get lot of threads on SUBMIT statement with selection screen.
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
http://help.sap.com/saphelp_nw04/Helpdata/EN/9f/dba51a35c111d1829f0000e829fbfe/content.htm
Regards
Bala Krishna -
How to create Long Text in Module Pool Program
Hi all,
I want to develop a new module pool program and I want to use Long text screen in this program and also want this text will store in table.I never develop such type of module pool before.This long text will like sales order long text.Please let me know the steps how I can develop such type of program and how I save long text huge data in table.
Thanks & Regards
NirmalHai ,
here you have to use custom control, for this
DATA: line(256) TYPE c,
text_tab LIKE STANDARD TABLE OF line,
field LIKE line.
1) Create custom control in your screen
2) CREATE OBJECT: container EXPORTING container_name = 'TEXTEDIT', "--> (this is custom control name in screen)
editor EXPORTING parent = container.
3) CALL METHOD editor->get_text_as_stream "This method reads data from custom control , inserts into itab 'text_tab'
IMPORTING
text = text_tab. "
READ TABLE text_tab INTO line INDEX 1. read the text into wa 'line'
if you want more clarity , see 'ABAPDOCU' >ABAP USER DIALOGS> COMPLEXSCREEN ELEMENTS--> DEMO CUSTOM_CONTROL -
Need help in module Pool programming.
Dear gurus
I'm stuck in a step of Module Pool program
Steps i used for enhancement in XK01.
1) i appended a structure in table LFA1 having two fields A and B.
2) then i went to IMG-> Logistic -> Business Partner-> Vendor -> Adoption of Customer's Own Master Data Fields -> Prepare Modification-Free Enhancement of Vendor Master Record ( Here i created my screen group Z1 without Function Code.
3) then i created below module pool program. of screen 9999 and in layout i added to fields to display A and B which i appended.
PROGRAM ZSNAK_XK01.
TABLES: lfa1.
module status_9999 output.
endmodule. " status_9999 OUTPUT
module user_command_9999 input.
endmodule.
4) After this i wen to IMG-> Logistic -> Business Partner-> Vendor -> Adoption of Customer's Own Master Data Fields ->
Business Add-In: Processing of Master Data Enhancements ( Here i created my implementation on method CHECK_ADD_ON_ACTIVE and added this code
if i_screen_group eq 'Z1'.
e_add_on_active = 'X'.
endif.
5) then i went to IMG-> Logistic -> Business Partner-> Vendor -> Adoption of Customer's Own Master Data Fields ->
Business Add-In: Customer Subscreens. and created my implementation on method GET_TAXI_SCREEN where i have written this code.
e_screen = '9999'.
e_program = 'ZSNAK_XK01'.
e_headerscreen_layout = ''.
After activation when i execute t-code XK01 i see my button there after INFORMATION BUTTON when i click on it i get following error.
Incorrect screen type: Screen is incorrectly defined or used.
The attribute screen type with the values 'Normal Screen' and
'Subscreen' determines the use of the screen. If a normal screen is used
as subscreen or vice versa, an error occurs.
The screen "ZSNAK_XK01" 9999 has, in this respect, an inappropriate screen
type.
Please guide me
Regards
Saad Nisar.I think you have defined the screen 9999 as normal screen. go to attributes tab of the screen and make it as "subscreen' (radio button) and activate
a® -
In module pool program - i want to control size of screen.
Hi,
In module pool program , I am handling 2 screen . while calling the 2 nd screen , i want to display the window size as i required.
Plz help me.
Regards,
Rani.Hi,
Specify the positions as
CALL SCREEN dynnr
[STARTING AT col1 lin1
[ENDING AT col2 lin2]].
By default, the screens of all dynpros of the called dynpro sequence are displayed in the current window. Use addition STARTING AT to open a modal dialog window.
Addition
... STARTING AT col1 lin1 [ENDING AT col2 lin2]
Effect
Use addition STARTING AT to open a new popup level and to display all screens of the called dynpro sequence in a modal dialog window. The upper left corner of the dialog window is determined by the values col1 and lin1 for column and line. The values refer to the window with popup level 0. The lower right corner is set automatically or you can use col2 and lin2 to specify it after ENDING AT. For col1, lin1, col2 and lin2, data objects of type i are expected. The values of col1, lin1 should be smaller than those of col2, lin2, because otherwise the behavior is undefined. The maximum popup level is 9.
Pls reward points if solved your issue.
Regards,
Renjith Michael. -
How to Use F4 help in Module Pool Programming??????
Hi Friends,
This is Jagadeesh, I have an issue Module Pool Programming. Any of you can go through on this and can give an required answer.
Issue is as follows,
I have an Input/Output field for that i need to give f4 help, based on that field the related data should sit in to my table control. The thing is there is no relation between the input/output field and the table control fields.
Is this possible? If so how can i do this.Hi Jagadeesh,
For F4 Values on Screen:
PROCESS ON VALUE_REQUEST
using module call starting with FIELD i.e FIELD field MODULE module
There are number of function modules that can be used for the purpose, but these
can fullfill the task easily or combination of them.
DYNP_VALUE_READ
F4IF_FIELD_VALUE_REQUEST
F4IF_INT_TABLE_VALUE_REQUEST
POPUP_WITH_TABLE_DISPLAY
DYNP_VALUE_READ
This function module is used to read values in the screen fields. Use of this
FM causes forced transfer of data from screen fields to ABAP fields.
There are 3 exporting parameters
DYNAME = program name = SY-CPROG
DYNUMB = Screen number = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
and one importing TABLE parameter
DYNPFIELDS = Table of TYPE DYNPREAD
The DYNPFIELDS parameter is used to pass internal table of type DYNPREAD
to this FM and the values read from the screen will be stored in this table.This
table consists of two fields:
FIELDNAME : Used to pass the name of screen field for which the value is to
be read.
FIELDVALUE : Used to read the value of the field in the screen.
e.g.
DATA: SCREEN_VALUES TYPE TABLE OF DYNPREAD ,
SCREEN_VALUE LIKE LINE OF SCREEN_VALUES.
SCREEN_VALUE-FIELDNAME = 'KUNNR' . * Field to be read
APPEND SCREEN_VALUE TO SCREEN_VALUES. * Fill the table
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = SCREEN_VALUES.
READ TABLE SCREEN_VALUES INDEX 1 INTO SCREEN_VALUE.Now the screen value for field KUNNR is in the SCREEN_VALUE-FIELDVALUE and can be used for further processing like using it to fill the internal table to be used as parameter in F4IF_INT_TABLE_VALUE_REQUEST ETC.
F4IF_FIELD_VALUE_REQUEST
This FM is used to display value help or input from ABAP dictionary.We have to pass the name of the structure or table(TABNAME) along with the field name(FIELDNAME) . The selection can be returned to the specified screen field if three
parameters DYNPNR,DYNPPROG,DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
F4IF_INT_TABLE_VALUE_REQUEST
This FM is used to dsiplay values stored in an internal table as input
help.This FM is used to program our own custom help if no such input help
exists in ABAP dictionary for a particular field. The parameter VALUE_TAB is used to pass the internal table containing input values.The parameter RETFIELD
is used to specify the internal table field whose value will be returned to the screen field or RETURN_TAB.
If DYNPNR,DYNPPROG and DYNPROFIELD are specified than the user selection is passed to the screen field specified in the DYNPROFIELD. If RETURN_TAB is specified the selectionis returned in a table.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = field from int table whose value will be returned
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'screen field'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = internal table whose values will be shown.
RETURN_TAB = internal table of type DDSHRETVAL
EXCEPTIONS
parameter_error = 1
no_values_found = 2
others = 3.
POPUP_WITH_TABLE_DISPLAY
This FM is used to display the contents of an internal table in a popup window.The user can select a row and the index of that is returned in the CHOISE
parameter.The VALUETAB is used to pass the internal table.
A suitable title can be set using TITLETEXT parameter. The starting and end position of the popup can be specified by the parameters STARTPOS_COL / ROW and ENDPOS_ROW / COL .
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL =
ENDPOS_ROW =
STARTPOS_COL =
STARTPOS_ROW =
TITLETEXT = 'title text'
IMPORTING
CHOISE =
TABLES
VALUETAB =
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
e.g.
DATA: w_choice TYPE SY-TABIX.
DATA: BEGIN OF i_values OCCURS 0 WITH HEADER LINE,
values TYPE I,
END OF i_values.
PARAMETRS : id TYPE I.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR id
i_values-values = '0001'.
APPEND i_values.
i_values-values = '0002'.
APPEND i_values.
i_values-values = '0003'.
APPEND i_values.
i_values-values = '0004'.
APPEND i_values.
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL = 40
ENDPOS_ROW = 12
STARTPOS_COL = 20
STARTPOS_ROW = 5
TITLETEXT = 'Select an ID'
IMPORTING
CHOISE = w_choice
TABLES
VALUETAB = i_values
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
CHECK w_choice > 0.
READ TABLE i_values INDEX w_choice....now we can process the selection as it is contained
...in the structure i_values.
Other FM that may be used to provide input help is HELP_START .
regards,
Dj
reward for all useful answers. -
Module Pool Programming using Abap Objects
Hi gurus.,
I need to create a module pool program with tabstrips and tablecontrols using Abap objects...plz guide me how i can achieve this... i am very much confused.. i dont know how and where to start .. plz send me documents and sample codes related to this topic..Also hoe i can implement f4 help in screen fields.. plz help me with Sample Code....
Regards.,
S.SivakumarHi Marcelo Ramos.,
here is my code without using WebLOg ..
PROGRAM ZACR018_BOXKOD .
TABLES DECLARATION
TABLES: ZACT02_BOXKOD, ZACS018_STR, MARA.
CONTROLS TABC TYPE TABLEVIEW USING SCREEN 102.
END OF TABLES DECLARATION
DEFINE DYN_DECLARE_CREATE.
DATA: &1 TYPE REF TO &2.
CREATE OBJECT &1.
END-OF-DEFINITION.
CONSTANTS C_WERKS TYPE WERKS_D VALUE '7600'.
CONSTANTS C_REPID TYPE SY-REPID VALUE SY-REPID.
CONSTANTS C_VERID TYPE VERID VALUE '0001'.
CONSTANTS C_MDV01 TYPE MDV01 VALUE 'F3LB02'.
CLASS CL_TABLE_CONTROL DEFINITION.
PUBLIC SECTION.
CLASS-DATA: IT_C_DISPLAY TYPE STANDARD TABLE OF ZACS018_STR.
CLASS-DATA: WA_DISPLAY TYPE ZACS018_STR.
CLASS-DATA: WA_COLS LIKE LINE OF TABC-COLS.
CLASS-METHODS M1 IMPORTING WA_C_DISPLAY TYPE ZACS018_STR EXPORTING ZACS018_STR_C TYPE ZACS018_STR.
CLASS-METHODS M2 IMPORTING ZACS018_STR_C TYPE ZACS018_STR CHANGING IT_C_DISPLAY LIKE IT_C_DISPLAY.
CLASS-METHODS M3 IMPORTING SAVE_OK TYPE SY-UCOMM CHANGING C_TABC TYPE CX_TABLEVIEW.
CLASS-METHODS M4 IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
SAVE_OK TYPE SY-UCOMM
CHANGING C_TABC TYPE CX_TABLEVIEW.
ENDCLASS.
CLASS CL_TABLE_CONTROL IMPLEMENTATION.
METHOD M1.
ZACS018_STR_C = WA_C_DISPLAY.
ENDMETHOD.
METHOD M2.
DESCRIBE TABLE IT_C_DISPLAY.
IF TABC-CURRENT_LINE > SY-TFILL.
APPEND ZACS018_STR_C TO IT_C_DISPLAY.
ELSE.
MODIFY IT_C_DISPLAY FROM ZACS018_STR_C INDEX TABC-CURRENT_LINE.
ENDIF.
ENDMETHOD.
METHOD M3.
IF SAVE_OK = 'CHECK'.
LOOP AT C_TABC-COLS INTO WA_COLS.
IF WA_COLS-SCREEN-GROUP2 = 'BOT'.
WA_COLS-SCREEN-INPUT = 0.
MODIFY C_TABC-COLS FROM WA_COLS INDEX SY-TABIX.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT C_TABC-COLS INTO WA_COLS.
IF WA_COLS-SCREEN-GROUP2 = 'BOT'.
WA_COLS-SCREEN-INPUT = 1.
MODIFY C_TABC-COLS FROM WA_COLS INDEX SY-TABIX.
ENDIF.
ENDLOOP.
ENDIF.
ENDMETHOD.
METHOD M4.
IF MASTER_PATTERN IS INITIAL OR PATTERNSLNO IS INITIAL.
LOOP AT C_TABC-COLS INTO WA_COLS.
IF WA_COLS-SCREEN-GROUP2 = 'BOT'.
WA_COLS-SCREEN-INPUT = 0.
MODIFY C_TABC-COLS FROM WA_COLS INDEX SY-TABIX.
ENDIF.
ENDLOOP.
ELSE.
IF SAVE_OK NE 'CHECK'.
LOOP AT C_TABC-COLS INTO WA_COLS.
IF WA_COLS-SCREEN-GROUP2 = 'BOT'.
WA_COLS-SCREEN-INPUT = 1.
MODIFY C_TABC-COLS FROM WA_COLS INDEX SY-TABIX.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDMETHOD.
ENDCLASS.
INTERFACE I_DATA.
DATA: WA_MARA TYPE MARA.
DATA: WA_MARC TYPE MARC.
DATA: WA_MAST TYPE MAST.
DATA: WA_STKO TYPE STKO.
DATA: WA_MKAL TYPE MKAL.
DATA: IT_STPOX TYPE STANDARD TABLE OF STPOX.
DATA: WA_STPOX TYPE STPOX.
DATA: WA_ZACT02_BOXKOD TYPE ZACT02_BOXKOD.
DATA: IT_C_DISPLAY TYPE STANDARD TABLE OF ZACS018_STR.
DATA: IT_SORT_DISPLAY TYPE STANDARD TABLE OF ZACS018_STR.
DATA: WA_DISPLAY TYPE ZACS018_STR.
DATA: W_YIELD(5) TYPE P DECIMALS 2.
METHODS PARTNO_VAL IMPORTING PARTCODE TYPE ZACS018_STR-PARTCODE.
METHODS MAINBI_VAL IMPORTING MAINB TYPE ZACS018_STR-MAINB.
METHODS CAVITY_VAL IMPORTING CAVITY TYPE ZACS018_STR-CAVITY.
METHODS GET_COMP_WT IMPORTING PARTCODE TYPE ZACS018_STR-PARTCODE EXPORTING GROSSWT TYPE ZACS018_STR-GROSSWT.
METHODS NETWT_VAL IMPORTING NETWT TYPE ZACS018_STR-NETWT GROSSWT TYPE ZACS018_STR-GROSSWT.
METHODS MASPAT_VAL IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN.
METHODS PATSLNO_VAL IMPORTING PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN .
METHODS MAX_REF EXPORTING VERSNO TYPE ZACT02_BOXKOD-VERSNO.
METHODS NOOFBOX_VAL IMPORTING BMSCH TYPE ZACT02_BOXKOD-BMSCH.
METHODS TOTTIME_VAL IMPORTING VGW01 TYPE ZACT02_BOXKOD-VGW01.
METHODS TOTRUNWT IMPORTING IT_C_DISPLAY LIKE IT_C_DISPLAY
EXPORTING W_SUM_RUNWT LIKE ZACS018_STR-NETWT.
METHODS TOTCOMP_WT IMPORTING IT_C_DISPLAY LIKE IT_C_DISPLAY
EXPORTING W_SUM_COMPWT LIKE ZACS018_STR-NETWT.
METHODS CHECK_OK IMPORTING SAVE_OK TYPE SY-UCOMM.
METHODS SCREEN_DISPLAY IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
SAVE_OK TYPE SY-UCOMM.
METHODS DUP_CHECK IMPORTING IT_C_DISPLAY LIKE IT_C_DISPLAY.
METHODS BOX_YLD IMPORTING W_SUM_COMPWT LIKE ZACS018_STR-NETWT
W_TOT_WT LIKE ZACS018_STR-NETWT
EXPORTING W_YIELD LIKE W_YIELD.
ENDINTERFACE.
CLASS CL_CONTROL_EVENTS DEFINITION.
PUBLIC SECTION.
CLASS-DATA: C_WERKS TYPE WERKS_D VALUE C_WERKS.
INTERFACES I_DATA.
ENDCLASS.
CLASS CL_CONTROL_EVENTS IMPLEMENTATION.
METHOD I_DATA~PARTNO_VAL.
SELECT SINGLE * FROM MARA INTO I_DATA~WA_MARA WHERE MATNR = PARTCODE.
IF SY-SUBRC <> 0.
MESSAGE TEXT-001 TYPE 'E'.
ELSE.
IF I_DATA~WA_MARA-MTART NE 'HALB'.
MESSAGE TEXT-002 TYPE 'E'.
ENDIF.
SELECT SINGLE * FROM MARC INTO I_DATA~WA_MARC WHERE MATNR = PARTCODE AND
WERKS = C_WERKS.
IF SY-SUBRC <> 0.
MESSAGE TEXT-003 TYPE 'E'.
ELSE.
IF I_DATA~WA_MARC-FEVOR NE 'KOD'.
MESSAGE TEXT-004 TYPE 'E'.
ENDIF.
ENDIF.
ENDIF.
SELECT SINGLE * FROM MKAL INTO I_DATA~WA_MKAL WHERE MATNR = PARTCODE AND
WERKS = C_WERKS AND
VERID = C_VERID AND
MDV01 = C_MDV01.
IF SY-SUBRC <> 0.
MESSAGE TEXT-028 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~CAVITY_VAL.
SET CURSOR FIELD 'ZACS018_STR-CAVITY' LINE SY-STEPL.
IF CAVITY IS INITIAL.
MESSAGE TEXT-005 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~MAINBI_VAL.
SET CURSOR FIELD 'ZACS018_STR-MAINB' LINE SY-STEPL.
IF MAINB IS INITIAL.
MESSAGE TEXT-006 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~GET_COMP_WT.
SET CURSOR FIELD 'ZACS018_STR-PARTCODE' LINE SY-STEPL.
*SELECT SINGLE MAST~MATNR
MAST~WERKS
MAST~STLAL
STKO~DATUV
INTO (I_DATAWA_MAST-MATNR,I_DATAWA_MAST-WERKS,I_DATAWA_MAST-STLAL,I_DATAWA_STKO-DATUV)
FROM MAST AS MAST INNER JOIN STKO AS STKO
ON STKOSTLNR = MASTSTLNR AND STKOSTLAL = MASTSTLAL
WHERE MAST~MATNR = PARTCODE AND
STKO~STLST = '1' AND
STKO~STLTY = 'M' AND
STKO~LKENZ = '' AND
STKO~LOEKZ = ''.
SELECT SINGLE * FROM MAST INTO I_DATA~WA_MAST WHERE MATNR = PARTCODE AND
STLAN = '1' AND
STLAL = '01' AND
WERKS = C_WERKS.
IF SY-SUBRC <> 0.
MESSAGE TEXT-009 TYPE 'E'.
ENDIF.
*CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 50
TEXT = TEXT-007.
*WAIT UP TO 2 SECONDS.
REFRESH I_DATA~IT_STPOX.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
FTREL = 'X'
ALEKZ = ' '
ALTVO = ' '
AUFSW = ' '
AUMGB = ' '
AUMNG = 0
AUSKZ = 'X'
AMIND = ' '
BAGRP = ' '
BEIKZ = ' '
BESSL = ' '
BGIXO = 'X'
BREMS = 'X'
CAPID = 'PP01'
CHLST = ' '
COSPR = ' '
CUOBJ = 000000000000000
CUOVS = 0
CUOLS = ' '
DATUV = SY-DATUM
DELNL = SPACE
DRLDT = ' '
EHNDL = '1'
EMENG = 0
ERSKZ = ' '
ERSSL = ' '
FBSTP = ' '
KNFBA = ' '
KSBVO = ' '
MBWLS = ' '
MKTLS = 'X'
MDMPS = ' '
MEHRS = ' '
MKMAT = ' '
MMAPS = ' '
SALWW = ' '
SPLWW = ' '
MMORY = '0'
MTNRV = PARTCODE
NLINK = ' '
POSTP = ' '
RNDKZ = ' '
RVREL = ' '
SANFR = ' '
SANIN = ' '
SANKA = ' '
SANKO = ' '
SANVS = ' '
SCHGT = ' '
STKKZ = ' '
STLAL = '01'
STLAN = '1'
STPST = 0
SVWVO = 'X'
WERKS = C_WERKS
NORVL = ' '
MDNOT = ' '
PANOT = ' '
QVERW = ' '
VERID = ' '
VRSVO = 'X'
IMPORTING
TOPMAT =
DSTST =
TABLES
STB = I_DATA~IT_STPOX
MATCAT =
EXCEPTIONS
ALT_NOT_FOUND = 1
CALL_INVALID = 2
MATERIAL_NOT_FOUND = 3
MISSING_AUTHORIZATION = 4
NO_BOM_FOUND = 5
NO_PLANT_DATA = 6
NO_SUITABLE_BOM_FOUND = 7
CONVERSION_ERROR = 8
OTHERS = 9
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT I_DATA~IT_STPOX INTO I_DATA~WA_STPOX.
SELECT SINGLE FEVOR FROM MARC INTO I_DATA~WA_MARC-FEVOR WHERE MATNR = I_DATA~WA_STPOX-IDNRK AND
WERKS = I_DATA~WA_STPOX-WERKS AND
FEVOR = 'MLT'.
IF SY-SUBRC EQ 0.
GROSSWT = I_DATA~WA_STPOX-MNGLG.
EXIT.
ELSE.
CLEAR GROSSWT.
ENDIF.
ENDLOOP.
IF GROSSWT IS INITIAL.
MESSAGE TEXT-008 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~NETWT_VAL.
SET CURSOR FIELD 'ZACS018_STR-NETWT' LINE SY-STEPL.
IF NETWT IS INITIAL.
MESSAGE TEXT-010 TYPE 'E'.
ELSE.
IF NETWT >= GROSSWT.
MESSAGE TEXT-011 TYPE 'E'.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD I_DATA~MASPAT_VAL.
IF MASTER_PATTERN IS INITIAL.
MESSAGE TEXT-014 TYPE 'E'.
ENDIF.
SELECT SINGLE * FROM MARA INTO I_DATA~WA_MARA WHERE MATNR = MASTER_PATTERN.
IF SY-SUBRC <> 0.
MESSAGE TEXT-001 TYPE 'E'.
ELSE.
IF I_DATA~WA_MARA-MTART NE 'FHMI'.
MESSAGE TEXT-012 TYPE 'E'.
ENDIF.
SELECT SINGLE * FROM MARC INTO I_DATA~WA_MARC WHERE MATNR = MASTER_PATTERN AND
WERKS = C_WERKS.
IF SY-SUBRC <> 0.
MESSAGE TEXT-003 TYPE 'E'.
ELSE.
IF I_DATA~WA_MARC-FEVOR NE 'MLD'.
MESSAGE TEXT-013 TYPE 'E'.
ENDIF.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD I_DATA~PATSLNO_VAL.
IF PATTERNSLNO IS INITIAL.
MESSAGE TEXT-016 TYPE 'E'.
ENDIF.
SELECT SINGLE * FROM ZACT02_BOXKOD INTO I_DATA~WA_ZACT02_BOXKOD WHERE MASTER_PATTERN = MASTER_PATTERN
AND PATTERNSLNO = PATTERNSLNO.
IF SY-SUBRC EQ 0.
MESSAGE TEXT-015 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~MAX_REF.
SELECT SINGLE MAX( VERSNO ) FROM ZACT02_BOXKOD INTO VERSNO.
VERSNO = VERSNO + 1.
ENDMETHOD.
METHOD I_DATA~NOOFBOX_VAL.
IF BMSCH IS INITIAL.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT' AND SCREEN-NAME <> 'ZACT02_BOXKOD-PRD_ACT' AND SCREEN-NAME <> 'ZACT02_BOXKOD-SHOTS'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
MESSAGE TEXT-017 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~TOTTIME_VAL.
IF VGW01 IS INITIAL.
MESSAGE TEXT-018 TYPE 'E'.
ENDIF.
IF VGW01 > 480.
MESSAGE TEXT-019 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~TOTRUNWT.
CLEAR W_SUM_RUNWT.
LOOP AT IT_C_DISPLAY INTO I_DATA~WA_DISPLAY.
W_SUM_RUNWT = W_SUM_RUNWT + I_DATA~WA_DISPLAY-NETWT * I_DATA~WA_DISPLAY-CAVITY.
ENDLOOP.
ENDMETHOD.
METHOD I_DATA~TOTCOMP_WT.
CLEAR W_SUM_COMPWT.
LOOP AT IT_C_DISPLAY INTO I_DATA~WA_DISPLAY.
W_SUM_COMPWT = W_SUM_COMPWT + I_DATA~WA_DISPLAY-GROSSWT * I_DATA~WA_DISPLAY-CAVITY.
ENDLOOP.
ENDMETHOD.
METHOD I_DATA~CHECK_OK.
IF SAVE_OK = 'CHECK'.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMETHOD.
METHOD I_DATA~SCREEN_DISPLAY.
IF MASTER_PATTERN IS INITIAL
OR PATTERNSLNO IS INITIAL.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
IF SAVE_OK NE 'CHECK'.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD I_DATA~DUP_CHECK. " IMPORTING IT_C_DISPLAY
DATA: W_PARTCODE LIKE I_DATA~WA_DISPLAY-PARTCODE.
I_DATA~IT_SORT_DISPLAY = IT_C_DISPLAY.
SORT I_DATA~IT_SORT_DISPLAY BY PARTCODE.
CLEAR W_PARTCODE.
LOOP AT I_DATA~IT_SORT_DISPLAY INTO I_DATA~WA_DISPLAY.
IF W_PARTCODE = I_DATA~WA_DISPLAY-PARTCODE.
MESSAGE TEXT-027 TYPE 'E'.
ENDIF.
W_PARTCODE = I_DATA~WA_DISPLAY-PARTCODE.
ENDLOOP.
ENDMETHOD.
METHOD I_DATA~BOX_YLD.
W_YIELD = ( W_SUM_COMPWT / W_TOT_WT ) * 100.
ENDMETHOD.
ENDCLASS.
inherited class for edit mode
CLASS CL_CONTROL_EDIT DEFINITION INHERITING FROM CL_CONTROL_EVENTS .
PUBLIC SECTION.
METHODS GET_DATA IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
EXPORTING VERSNO TYPE ZACT02_BOXKOD-VERSNO
CHANGING ZACT02_BOXKOD TYPE ZACT02_BOXKOD
IT_C_DISPLAY LIKE I_DATA~IT_C_DISPLAY
IT_DEL_DISPLAY LIKE I_DATA~IT_C_DISPLAY
TABC TYPE CX_TABLEVIEW.
METHODS PATSLNO_VAL_CHG IMPORTING PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN .
ENDCLASS.
CLASS CL_CONTROL_EDIT IMPLEMENTATION.
METHOD GET_DATA.
IF MASTER_PATTERN IS NOT INITIAL AND PATTERNSLNO IS NOT INITIAL.
IF IT_C_DISPLAY IS INITIAL.
IF IT_DEL_DISPLAY IS INITIAL.
SELECT SINGLE MAX( VERSNO ) FROM ZACT02_BOXKOD INTO VERSNO WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO.
SELECT SINGLE * FROM ZACT02_BOXKOD INTO ZACT02_BOXKOD WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO AND
VERSNO = VERSNO..
SELECT PARTCODE MAINB CAVITY GROSSWT NETWT FROM ZACT02_BOXKOD INTO
CORRESPONDING FIELDS OF TABLE IT_C_DISPLAY WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO AND
VERSNO = VERSNO.
IT_DEL_DISPLAY[] = IT_C_DISPLAY[].
DESCRIBE TABLE IT_C_DISPLAY.
TABC-LINES = SY-TFILL.
ENDIF.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD PATSLNO_VAL_CHG.
SELECT SINGLE * FROM ZACT02_BOXKOD INTO I_DATA~WA_ZACT02_BOXKOD WHERE MASTER_PATTERN = MASTER_PATTERN
AND PATTERNSLNO = PATTERNSLNO.
IF PATTERNSLNO IS INITIAL.
MESSAGE TEXT-016 TYPE 'E'.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE TEXT-022 TYPE 'E'.
ENDIF.
ENDMETHOD.
ENDCLASS.
inheriting for display
CLASS CL_CONTROL_DISPLAY DEFINITION INHERITING FROM CL_CONTROL_EDIT .
PUBLIC SECTION.
METHODS GET_DISPLAY_DATA IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
VERSNO TYPE ZACT02_BOXKOD-VERSNO
CHANGING IT_C_DISPLAY LIKE I_DATA~IT_C_DISPLAY
ZACT02_BOXKOD TYPE ZACT02_BOXKOD
TABC TYPE CX_TABLEVIEW.
ENDCLASS.
CLASS CL_CONTROL_DISPLAY IMPLEMENTATION.
METHOD GET_DISPLAY_DATA.
SELECT SINGLE * FROM ZACT02_BOXKOD INTO ZACT02_BOXKOD WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO AND
VERSNO = VERSNO..
IF SY-SUBRC <> 0.
MESSAGE TEXT-026 TYPE 'E'.
ENDIF.
SELECT PARTCODE MAINB CAVITY GROSSWT NETWT FROM ZACT02_BOXKOD INTO
CORRESPONDING FIELDS OF TABLE IT_C_DISPLAY WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO AND
VERSNO = VERSNO.
DESCRIBE TABLE IT_C_DISPLAY.
TABC-LINES = SY-TFILL.
ENDMETHOD.
ENDCLASS.
DATA: O_CONTROL_EVENTS TYPE REF TO CL_CONTROL_EVENTS.
DATA: O_CONTROL_EVENTS_EDIT TYPE REF TO CL_CONTROL_EDIT.
DATA: O_CONTROL_EVENTS_DISPLAY TYPE REF TO CL_CONTROL_DISPLAY.
SELECTION SCREEN
END OF SELECTION SCREEN
VARIABLE DECLARATION BEGIN WITH W_
DATA: OK_CODE TYPE SY-UCOMM,
SAVE_OK TYPE SY-UCOMM.
DATA: W_TOT_WT LIKE ZACS018_STR-NETWT,
W_SUM_COMPWT LIKE ZACS018_STR-NETWT,
W_SUM_RUNWT LIKE ZACS018_STR-NETWT,
W_YIELD(5) TYPE P DECIMALS 2.
DATA: W_TIMLO TYPE SY-TIMLO,
W_MODE TYPE SY-UCOMM.
DATA: W_SCREEN_NO TYPE SY-DYNNR.
END OF VARIABLE DECLARATION
WORK AREAS DECLARATION BEGIN WITH WA_
DATA: WA_DISPLAY TYPE ZACS018_STR.
END OF WORK AREAS DECLARATION
INTERNAL TABLES BEGIN WITH IT_
DATA: IT_DISPLAY TYPE ZACS018_STR OCCURS 0.
DATA: IT_DISPLAY_PRD TYPE ZACS018_STR OCCURS 0.
DATA: IT_DEL_DISPLAY TYPE ZACS018_STR OCCURS 0.
DATA: IT_ZACT02_BOXKOD TYPE ZACT02_BOXKOD OCCURS 0 WITH HEADER LINE.
DATA: IT_ZACT02_BOXKOD_DEL TYPE ZACT02_BOXKOD OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF IT_F4MASTERPAT OCCURS 0,
MASTER_PATTERN LIKE ZACT02_BOXKOD-MASTER_PATTERN,
END OF IT_F4MASTERPAT.
DATA: BEGIN OF IT_F4PATSLNO OCCURS 0,
MASTER_PATTERN LIKE ZACT02_BOXKOD-MASTER_PATTERN,
PATTERNSLNO LIKE ZACT02_BOXKOD-PATTERNSLNO,
VERSNO LIKE ZACT02_BOXKOD-VERSNO,
END OF IT_F4PATSLNO.
DATA: IT_EXCLUDE TYPE TABLE OF SY-UCOMM..
DATA : IT_DYNPRO LIKE DYNPREAD OCCURS 0 WITH HEADER LINE.
END OF INTERNAL TABLES DECLARATIONS
LOAD-OF-PROGRAM.
CREATE OBJECT O_CONTROL_EVENTS.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
W_MODE = SAVE_OK.
CASE SAVE_OK.
WHEN 'CREATE'.
CALL SCREEN 101.
WHEN 'CHANGE'.
CREATE OBJECT O_CONTROL_EVENTS_EDIT.
CALL SCREEN 101.
WHEN 'DISPLAY'.
APPEND 'SAVE' TO IT_EXCLUDE.
APPEND 'CHECK' TO IT_EXCLUDE.
APPEND 'ADD' TO IT_EXCLUDE.
CREATE OBJECT O_CONTROL_EVENTS_DISPLAY.
CALL SCREEN 101.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0102 OUTPUT
text
MODULE STATUS_0102 OUTPUT.
CALL METHOD CL_TABLE_CONTROL=>M3 EXPORTING SAVE_OK = SAVE_OK CHANGING C_TABC = TABC.
CALL METHOD O_CONTROL_EVENTS->I_DATA~CHECK_OK EXPORTING SAVE_OK = SAVE_OK.
CALL METHOD O_CONTROL_EVENTS->I_DATA~SCREEN_DISPLAY EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
SAVE_OK = SAVE_OK.
CALL METHOD CL_TABLE_CONTROL=>M4 EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
SAVE_OK = SAVE_OK
CHANGING C_TABC = TABC.
DESCRIBE TABLE IT_DISPLAY.
IF TABC-LINES <= 1.
IF SY-TFILL = 0.
TABC-LINES = 1.
ENDIF.
ENDIF.
IF SAVE_OK NE 'CHECK'.
IF ZACT02_BOXKOD-TOOL_ACT <> 'X'.
CLEAR ZACT02_BOXKOD-PRD_ACT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-PRD_ACT'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-PRD_ACT'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
CALL METHOD O_CONTROL_EVENTS->I_DATA~TOTRUNWT EXPORTING IT_C_DISPLAY = IT_DISPLAY
IMPORTING W_SUM_RUNWT = W_SUM_RUNWT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~TOTCOMP_WT EXPORTING IT_C_DISPLAY = IT_DISPLAY
IMPORTING W_SUM_COMPWT = W_SUM_COMPWT.
CLEAR W_TOT_WT.
W_TOT_WT = W_SUM_RUNWT + W_SUM_COMPWT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~BOX_YLD EXPORTING W_SUM_COMPWT = W_SUM_COMPWT
W_TOT_WT = W_TOT_WT
IMPORTING W_YIELD = W_YIELD.
IF W_MODE <> 'CREATE'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-SHOTS'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF W_MODE = 'DISPLAY'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ADD' OR SCREEN-NAME = 'ICON_DELETE'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE. " STATUS_0102 OUTPUT
*& Module STATUS_0101 OUTPUT
text
MODULE STATUS_0101 OUTPUT.
SET PF-STATUS 'STANDARD' EXCLUDING 'SAVE'.
IF W_MODE = 'CREATE'.
SET TITLEBAR 'STANDARD'.
ELSEIF W_MODE = 'DISPLAY'.
SET TITLEBAR 'STD_DIS'.
ELSE.
SET TITLEBAR 'STD_EDIT'.
ENDIF.
IF SAVE_OK = 'CHECK'.
DESCRIBE TABLE IT_DISPLAY.
IF SY-TFILL > 0.
SET PF-STATUS 'STANDARD'.
ENDIF.
ENDIF.
IF W_MODE = 'DISPLAY'.
SET PF-STATUS 'STANDARD' EXCLUDING IT_EXCLUDE.
ENDIF.
IF ZACT02_BOXKOD-MASTER_PATTERN IS NOT INITIAL AND
ZACT02_BOXKOD-PATTERNSLNO IS NOT INITIAL.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'TOP'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF W_MODE = 'DISPLAY'.
IF ZACT02_BOXKOD-VERSNO IS INITIAL.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-VERSNO'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-VERSNO'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDMODULE. " STATUS_0101 OUTPUT
*& Module USER_COMMAND_0102 INPUT
text
MODULE USER_COMMAND_0102 INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK.
WHEN 'ADD'.
DESCRIBE TABLE IT_DISPLAY.
IF SY-TFILL >= TABC-LINES.
IF TABC-LINES < 16.
TABC-LINES = SY-TFILL + 1.
ENDIF.
ENDIF.
WHEN 'DEL'.
LOOP AT IT_DISPLAY INTO WA_DISPLAY WHERE MARK = 'X'.
DELETE IT_DISPLAY INDEX SY-TABIX.
ENDLOOP.
DESCRIBE TABLE IT_DISPLAY.
IF SY-TFILL >= 1.
TABC-LINES = SY-TFILL.
ELSE.
TABC-LINES = 1.
ENDIF.
WHEN 'CHECK'.
CALL METHOD O_CONTROL_EVENTS->I_DATA~DUP_CHECK EXPORTING IT_C_DISPLAY = IT_DISPLAY.
WHEN 'SAVE'.
W_TIMLO = SY-TIMLO.
IF W_MODE = 'CREATE'.
PERFORM CREATE_SAVE.
ENDIF.
IF W_MODE = 'CHANGE'.
PERFORM EDIT_SAVE.
ENDIF.
ENDCASE.
IF W_MODE = 'DISPLAY'.
SAVE_OK = 'CHECK'.
ENDIF.
ENDMODULE. " USER_COMMAND_0102 INPUT
*& Module MOD_TABLE INPUT
text
MODULE MOD_TABLE INPUT.
CALL METHOD CL_TABLE_CONTROL=>M2 EXPORTING ZACS018_STR_C = ZACS018_STR CHANGING IT_C_DISPLAY = IT_DISPLAY.
ENDMODULE. " MOD_TABLE INPUT
*& Module ASSIGN OUTPUT
text
MODULE ASSIGN OUTPUT.
CALL METHOD CL_TABLE_CONTROL=>M1 EXPORTING WA_C_DISPLAY = WA_DISPLAY IMPORTING ZACS018_STR_C = ZACS018_STR.
ENDMODULE. " ASSIGN OUTPUT
*& Module CHK_PARTCODE INPUT
text
MODULE CHK_PARTCODE INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~PARTNO_VAL EXPORTING PARTCODE = ZACS018_STR-PARTCODE.
ENDMODULE. " CHK_PARTCODE INPUT
*& Module CHK_CAVITY INPUT
text
MODULE CHK_CAVITY INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~CAVITY_VAL EXPORTING CAVITY = ZACS018_STR-CAVITY.
ENDMODULE. " CHK_CAVITY INPUT
*& Module CHK_MAINB INPUT
text
MODULE CHK_MAINB INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~MAINBI_VAL EXPORTING MAINB = ZACS018_STR-MAINB.
ENDMODULE. " CHK_MAINB INPUT
*& Module GET_COMP_WT INPUT
text
MODULE GET_COMP_WT INPUT.
IF W_MODE <> 'DISPLAY'.
CALL METHOD O_CONTROL_EVENTS->I_DATA~GET_COMP_WT EXPORTING PARTCODE = ZACS018_STR-PARTCODE
IMPORTING GROSSWT = ZACS018_STR-GROSSWT.
ENDIF.
ENDMODULE. " GET_COMP_WT INPUT
*& Module CHK_NETWT INPUT
text
MODULE CHK_NETWT INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~NETWT_VAL EXPORTING NETWT = ZACS018_STR-NETWT
GROSSWT = ZACS018_STR-GROSSWT.
ENDMODULE. " CHK_NETWT INPUT
*& Module CHK_MPAT INPUT
text
MODULE CHK_MPAT INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~MASPAT_VAL EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN.
ENDMODULE. " CHK_MPAT INPUT
*& Module CHK_SLNO INPUT
text
MODULE CHK_SLNO INPUT.
IF W_MODE = 'CREATE'.
CALL METHOD O_CONTROL_EVENTS->I_DATA~PATSLNO_VAL EXPORTING PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN .
ELSEIF W_MODE = 'CHANGE' .
CALL METHOD O_CONTROL_EVENTS_EDIT->PATSLNO_VAL_CHG EXPORTING PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN .
CALL METHOD O_CONTROL_EVENTS_EDIT->GET_DATA EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
IMPORTING VERSNO = ZACT02_BOXKOD-VERSNO
CHANGING ZACT02_BOXKOD = ZACT02_BOXKOD
IT_C_DISPLAY = IT_DISPLAY
IT_DEL_DISPLAY = IT_DEL_DISPLAY
TABC = TABC.
ELSE.
CALL METHOD O_CONTROL_EVENTS_DISPLAY->PATSLNO_VAL_CHG EXPORTING PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN .
ENDIF.
ENDMODULE. " CHK_SLNO INPUT
*& Module MAX_VER INPUT
text
MODULE MAX_VER INPUT.
IF W_MODE = 'CREATE'.
CALL METHOD O_CONTROL_EVENTS->I_DATA~MAX_REF IMPORTING VERSNO = ZACT02_BOXKOD-VERSNO.
ENDIF.
IF W_MODE = 'DISPLAY'.
IF ZACT02_BOXKOD-VERSNO IS INITIAL.
MESSAGE TEXT-023 TYPE 'E'.
ENDIF.
IF ZACT02_BOXKOD-MASTER_PATTERN IS NOT INITIAL AND
ZACT02_BOXKOD-PATTERNSLNO IS NOT INITIAL AND
ZACT02_BOXKOD-VERSNO IS NOT INITIAL.
CALL METHOD O_CONTROL_EVENTS_DISPLAY->GET_DISPLAY_DATA EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
VERSNO = ZACT02_BOXKOD-VERSNO
CHANGING ZACT02_BOXKOD = ZACT02_BOXKOD
IT_C_DISPLAY = IT_DISPLAY
TABC = TABC.
ENDIF.
ENDIF.
ENDMODULE. " MAX_VER INPUT
*& Module CHK_NOBOXES INPUT
text
MODULE CHK_NOBOXES INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~NOOFBOX_VAL EXPORTING BMSCH = ZACT02_BOXKOD-BMSCH.
ENDMODULE. " CHK_NOBOXES INPUT
*& Module CHK_TOTTIME INPUT
text
MODULE CHK_TOTTIME INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~TOTTIME_VAL EXPORTING VGW01 = ZACT02_BOXKOD-VGW01.
ENDMODULE. " CHK_TOTTIME INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'INITIAL'.
SET TITLEBAR 'STANDARD_MAIN'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module EXIT_PROGRAM INPUT
text
MODULE EXIT_PROGRAM INPUT.
LEAVE TO TRANSACTION 'ZAC16'.
ENDMODULE. " EXIT_PROGRAM INPUT -
Cursor position on screen data in module pool programming(urgent)
Hi all,
I developed a module pool program which will save the data after scanning the barcode data.
In my program screen 100 is there which contains field 2dbar. scanned data is comming to 2dbar field.
we r doing scan 4 times.once for vendor number,once for material no. like this.
After 1st scan, vendor number will come to field 2dbar.
Then I developed logic to put comma after each scanned data come to this field 2dbar.
MODULE put_comma INPUT.
CASE OK_CODE.
when ''.
move 2dbar to 2dbar1.
clear 2dbar.
concatenate 2dbar1 ',' into 2dbar2.
*replace 2dbar with 2dbar2 into 2dbar.
move 2dbar2 to 2dbar.
*write 2dbar2 to 2dbar.
condense 2dbar no-gaps.
*move '' to 2dbar.
*set cursor field 2dbar offset 5.
*write
ENDCASE.
ENDMODULE. " put_comma INPUT
By above logic, comma comes to the starting position of 2dbar after each scan. i.e cursor position is coming to the starting position of screen field 2dbar.
Now I need to move the cursor position after the comma position on 2dbar after each scan.
after 1st scan, 2dbar contains
vmotorola
then my logic puts a comma when u put enter on screen 100.
now 2dbar contains
vmotorola,
i should get the cursor position after the comma.but i am getting cursor position before 'v'.so how to move this cursor position beyond comma after each scan.
I added set cursor command but it is not working.plz
What is the logic, I need to put in PAI to move the cursor on selection screen.
Already the logic I have mentioned. with that logic, I can put comma.now I need to add cursor movement logic to move the cursoron on screen field 2dbar.
Plz reply me as it is urgent.
Thanks in advance.
Regards
pabitraCASE OK_CODE.
when ''.
move 2dbar to 2dbar1.
clear 2dbar.
concatenate 2dbar1 ',' into 2dbar2.
move 2dbar2 to 2dbar.
condense 2dbar no-gaps.
len = strlen ( 2dbar ).
len = len - 1.
set cursor field 2dbar offset len.
ENDCASE.
ENDMODULE. " put_comma INPUT -
Module Pool Programming - Calling SAP Standard Text Screen
Hi Gurus
I am working on Module Pool Programming...In the one of the screen there is a column named "Description" where I need to keep a Button to call a SAP standard text editing screen and what ever information I enter in the field should be downloadable
is this option possible?If so...Plz send me the Sample code
Thanks
GaneshHi Gani,
I can help you till getting the text editor in your module pool program.
TOP
PROGRAM ZREDDY_TEXT.
constants: line_length type i value 132.
data:
reference to wrapper class of control
g_editor type ref to cl_gui_textedit,
reference to custom container: necessary to bind TextEdit Control
g_editor_container type ref to cl_gui_custom_container,
g_repid like sy-repid, " getting program name
g_ok_code like sy-ucomm, " return code from screen
g_mytable(132) type c occurs 0, " getting the text of table
g_mycontainer(30) type c, " string for the containers
v_result(256) type c, " getting the text of table control
gw_thead like thead, " for header information
it_line type table of tline with header line. " internal table of type tline
PBO
MODULE STATUS_0900 OUTPUT.
SET PF-STATUS 'ZTEXT'.
SET TITLEBAR 'xxx'.
if g_editor is initial.
create control container
create object g_editor_container
exporting
container_name = 'CUSTOM_CONTROL' " Make sure when you create custom container in layout give name as Custom container
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
g_mycontainer = 'CUSTOM_CONTROL'.
create calls constructor, which initializes, creates and links
TextEdit Control
create object g_editor
exporting
parent = g_editor_container
wordwrap_mode =
cl_gui_textedit=>wordwrap_off
cl_gui_textedit=>wordwrap_at_fixed_position
cl_gui_textedit=>WORDWRAP_AT_WINDOWBORDER
wordwrap_position = line_length
wordwrap_to_linebreak_mode = cl_gui_textedit=>true.
refresh g_mytable. " to initialize table upon OK_CODE 'BACK' at PAI
endif.
ENDMODULE. " STATUS_0900 OUTPUT
Cheers!!
Balu
Edited by: Balu CH on Oct 22, 2008 8:55 PM
Maybe you are looking for
-
Time Machine is causing my external hard drive not to be recognized or read
I have been using Time Machine on my MAC. I don't like it. I now have gone into preferences and stopped it from further backups. Now, I want to restore my Toshiba External Hard Drive and have it backup. When I look into my Macintosh HD, it does not "
-
How can I add form field value to the file name in save as dialog box
I do not want the form to be saved automatically, just want the form to auto populate the "file name" only. A little background on the forms I want to use: My company has 70 retail outlets, I'll use one of our pdf forms called an "Incident Report" a
-
What to look for when purchasing iPhone external battery?
Next month I'll be taking a 5 day trip to NYC and I'll be using my built-in iPhone 4 Google Maps GPS a lot, so I'm in the market to buy an external battery. So with that said, what should I look for when purchasing one? I've noticed a lot of these ad
-
How to Create a Auto Generated number with some preceding text in Sharepoint 2010
I am trying to create a auto generated number field in Sharepoint 2010 list item. My requirement is to have the following format number generated when new request is created in Sharepoint using form. Auto generated Ticket ID should be in the followin
-
How to: all the cell content to show up when printing (or saving to PDF)
Hello, everyone! On my website, I export data to a "CSV" file, but all it does is come up with all the data like this: "AAAAA" , "BBBBB" , "CCCCCCCCCCCCCCCCCCCCCCCCCCC" , " "2010-02-01 07:39:13" , "DDDDDDD" What I do is select all, and save it into a