Module pool report
Hi
Can any one give me brief idea about Module pool reporting
Regards
Sandhya
SAP-ABAP Consultant
Hi
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
Try like this
parameters :
table1(30) type c,
input(30) type c.
data w_flag type i.
at selection-screen output.
if w_flag eq 1.
clear w_flag.
loop at screen.
if screen-name = 'INPUT'.
%_INPUT_%_APP_%-TEXT = TABLE1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
at selection-screen.
w_flag = 1.
start-of-selection.
write input.
Use GET PF-STATUS to Gets the current GUI status.
Syntax
GET PF-STATUS <f> [PROGRAM <prog>] [EXCLUDING <itab>].
Returns the name of the current GUI status (the same as SY-PFKEY) into the variable <f>. The PROGRAM addition writes the name of the ABAP program to which the status belongs into the variable <prog>. The EXCLUDING addition returns a list of all currently inactive function codes into the internal table <itab>.
Then use SET PF-STATUS Sets the GUI status
Syntax
SET PF-STATUS <stat> [EXCLUDING <f>|<itab>]
[IMMEDIATELY] [OF PROGRAM <prog>].
Sets the GUI status <stat> for the subsequent screens. The EXCLUDING addition allows you to deactivate functions dynamically. The IMMEDIATELY addition sets the GUI status of the list currently displayed. The OF PROGRAM addition allows you to use a GUI status from another program.
Here you can use the Excluding option to exclude the ICONS
Sample coding
*& Include MZ_TABLEO01 *
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MYSTATUS'.
SET TITLEBAR 'TITLE-001'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module POPULATE_IT OUTPUT
text
MODULE populate_it OUTPUT.
IF ok_code NE 'ADD' AND
ok_code NE 'DEL'.
IF flag NE 'X'.
SELECT * FROM ztest_so INTO TABLE it_populate.
flag = 'X'.
ENDIF.
ENDIF.
ENDMODULE. " POPULATE_IT OUTPUT
*& Module set_lines OUTPUT
text
MODULE set_lines OUTPUT.
DESCRIBE TABLE it_populate LINES sy-tfill.
so_tbl_ctrl-lines = sy-tfill.
ENDMODULE. " set_lines OUTPUT
*& Module move_values_to_tbl_ctrl OUTPUT
text
MODULE move_values_to_tbl_ctrl OUTPUT.
MOVE : it_populate-vbeln TO ztest_so-vbeln,
it_populate-bukrs TO ztest_so-bukrs,
it_populate-kunnr TO ztest_so-kunnr,
it_populate-erdat TO ztest_so-erdat.
ENDMODULE. " move_values_to_tbl_ctrl OUTPUT
*& Module set_select_status OUTPUT
text
MODULE set_select_status OUTPUT.
READ TABLE it_selected WITH KEY vbeln = it_populate-vbeln.
IF sy-subrc EQ 0.
line_sel_col = 'X'.
ELSE.
line_sel_col = space.
ENDIF.
ENDMODULE. " set_select_status OUTPUT
*& Module clear_okcode OUTPUT
text
module clear_okcode output.
CLEAR OK_CODE.
endmodule. " clear_okcode OUTPUT
and in PAI
*& Include MZ_TABLEI01 *
*& Module USER_COMMAND_0100 INPUT
text
module USER_COMMAND_0100 input.
case ok_code.
when 'BACK' or 'CANC' or 'EXIT'.
leave to screen 0.
when 'SELALL'.
clear IT_selected.
refresh IT_selected.
loop at IT_POPULATE.
move-corresponding IT_POPULATE to IT_selected.
append IT_selected.
endloop.
when 'DESELALL'.
clear IT_selected.
refresh IT_selected.
when 'SAVE'.
LOOP AT IT_SELECTED.
MODIFY ZTEST_SO FROM IT_SELECTED.
ENDLOOP.
LOOP AT IT_DELETED.
DELETE FROM ZTEST_SO WHERE VBELN = IT_DELETED-VBELN.
ENDLOOP.
commit work.
when 'DEL'.
LOOP AT IT_SELECTED.
MOVE-CORRESPONDING IT_SELECTED
TO
IT_DELETED.
APPEND IT_DELETED.
Also delete it from T_SO.
DELETE IT_POPULATE WHERE VBELN = IT_SELECTED-VBELN.
ENDLOOP.
CLEAR IT_SELECTED.
REFRESH IT_SELECTED.
endcase.
endmodule. " USER_COMMAND_0100 INPUT
*& Module get_selected_so INPUT
text
module get_selected_so input.
If ok_code ne 'SELALL'.
IF line_sel_col EQ 'X'.
Read table IT_selected with key vbeln = IT_POPULATE-vbeln.
If sy-subrc ne 0.
MOVE-CORRESPONDING ztest_so TO IT_selected.
Append IT_selected.
Else.
MOVE-CORRESPONDING ztest_so TO IT_selected.
Modify IT_selected index sy-tabix.
Endif.
Else.
Read table IT_selected with key vbeln = IT_POPULATE-VBELN.
If sy-subrc eq 0.
Delete IT_selected where VBELN = IT_POPULATE-VBELN.
Endif.
Endif.
ENDIF.
endmodule. " get_selected_so INPUT
check these links, it may be helpful to u.
this link contains information about :
1)Table Controls in ABAP Programs
2)Looping Through an Internal Table
3)Table Controls: Examples with Scrolling
http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbac1d35c111d1829f0000e829fbfe/frameset.htm
process before output.
*&spwizard: pbo flow logic for tablecontrol 'MY_TAB'
module my_tab_change_tc_attr.
*&spwizard: module MY_TAB_change_col_attr.
loop at it_item
into wa_item
with control my_tab
cursor my_tab-current_line.
module my_tab_get_lines.
*&spwizard: module MY_TAB_change_field_attr
endloop.
module status_0100.
module set_curson.
module get_date.
module ok_code.
process after input.
*&spwizard: pai flow logic for tablecontrol 'MY_TAB'
loop at it_item.
chain.
field wa_item-zeile.
field wa_item-matnr.
field wa_item-maktx.
field wa_item-meins.
field wa_item-menge.
field wa_item-rflag.
module my_tab_modify on chain-request.
endchain.
endloop.
module my_tab_user_command.
*&spwizard: module MY_TAB_change_tc_attr.
*&spwizard: module MY_TAB_change_col_attr.
module get_vendor_name.
module user_command_0100.
For second screen
PROCESS BEFORE OUTPUT.
*&spwizard: pbo flow logic for tablecontrol 'CON_TAB'
module CON_TAB_change_tc_attr.
*&spwizard: module CON_TAB_change_col_attr.
loop at IT_DB_ITEM
into WA_DB_ITEM
with control CON_TAB
cursor CON_TAB-current_line.
module CON_TAB_get_lines.
*&spwizard: module CON_TAB_change_field_attr
endloop.
MODULE STATUS_0110.
PROCESS AFTER INPUT.
*&spwizard: pai flow logic for tablecontrol 'CON_TAB'
loop at IT_DB_ITEM.
chain.
field WA_DB_ITEM-ZEILE.
field WA_DB_ITEM-MATNR.
field WA_DB_ITEM-MAKTX.
field WA_DB_ITEM-MEINS.
field WA_DB_ITEM-MENGE.
field WA_DB_ITEM-RFLAG.
endchain.
endloop.
module CON_TAB_user_command.
*&spwizard: module CON_TAB_change_tc_attr.
*&spwizard: module CON_TAB_change_col_attr.
MODULE USER_COMMAND_0110.
Regards
Pavan
Similar Messages
-
Differance between module pool & report programming
hi can any 1 tell me what is a big difference between module pool & report programs why is the need of module pool if we can do all the things with report program, please tell me technically how it behave
Please search for available information before posting
Edited by: kishan P on Sep 6, 2010 11:22 AMHi, Ashwinv
Welcome to SCN
Please Search Before Posting any More
Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!
Thanks and Regards,
Faisal -
Query regarding translation in module pool
Hi ppl,
I have created a module pool program which has a screen with a number of screen elements.
Now, I have translated the texts of the fields into oher languages also (using GOTO-> Translation through the program).
My doubt is that will the translation also be captured in the same TR under which my module pool report is created or is there any other procedure to transport the translations done?
I am working on SAP version 4.6C.
Please help.
Thanks,
David.Hi,
You can translate elements using SE63 , also the way u have done also is fine .
TR gets attached to program request.
TC
Sajimon Chandran -
Regarding exit from the module pool screen
h experts,
i have developed a module pool report in which in the selection screen i have four fields which are mandatory ,when i execute the program without entering in the selection screen it do not allow to come out of the module pool screen ...what i want that without entering any input in the selection screen if i press exit button push button it will allow to come out of the screen for this what sud i do plz help me....Hi
keep a button called <b>EXIT</b> on the screen
Make the function type of that field as <b>E</b>
in Flow logic write
PROCESS AFTER INPUT.
Forced Exit from the transaction from screen
MODULE exit AT EXIT-COMMAND.
double click on exit module and
then in PAI write
*& Module exit INPUT
Exit from the Transaction
MODULE exit INPUT.
CASE okcode.
WHEN 'EXIT' OR 'CANCEL'.
CLEAR okcode.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " exit INPUT
<b>Reward points for useful Answers</b>
Regards
Anji -
Input must bein module pool and the output should be in ALV report
Dear Friends,
Greetings.....................
Please give me solution for my problem.
Consider there is one module pool screen with the fields empno, edob, ecity.There is one search button.if the user clicks the search button.it should display the employee details based on empno and output must be in ALV reports.
Thanks in advance
RajHi,
Try to use
call function 'REUSE_ALV_POPUP_TO_SELECT'
exporting
i_title = text-021
i_zebra = 'X'
i_tabname = 'P_YSIZE1'
it_fieldcat = p_fieldcat[]
it_excluding = p_excltab[]
i_screen_start_column = 02
i_screen_start_line = 02
i_screen_end_column = 45
i_screen_end_line = 15
importing
e_exit = p_exit
es_selfield = p_selfield
tables
t_outtab = p_ysize1.
a® -
How to call a "Z"module pool program in a "z"report
Hi Guys,
I have two reports .
1. Report : uploads a tab delimited " .Txt1" file and update the "z1" table
".TXT1" : File contains 4 fields
2. Module pool. :Uploads a a tab delimited " .Txt2" file and update another "z2" table
".TXT2" file contains the 4 fileds of ".TXT1" and also 2 extra fields.
I want to merge (call) the module pool program in the Report and perform the upload function using only one ".TXT" file.Please do guide me precisely .
*Report:*
REPORT zrswbgcs009 NO STANDARD PAGE HEADING MESSAGE-ID zwb
LINE-SIZE 185.
TABLES: zgcs_foc. "FOC Parts Table
*data count buffer
DATA: read_cnt(6) TYPE p, "Find read record
update_cnt(6) TYPE p, "OK record
error_cnt(6) TYPE p. "Error record
*file buffer(FOC)
DATA: BEGIN OF FOC_inrec OCCURS 0,
CUSTOMER(10), "Customer
PART_CODE(18), "Parts Code
REF_NO(35), "Ref No.
REF_DATE(10), "Ref Date
QTY(12), "Parts Qty
TEXT(100), "Remark
END OF FOC_inrec.
*file buffer
DATA: BEGIN OF inrec OCCURS 0,
CUSTOMER(10), "Customer
PART_CODE(18), "Parts Code
REF_NO(35), "Ref No.
REF_DATE(10), "Ref Date
QTY(12), "Parts Qty
PRICE(15), "Parts Price
WAERK(5), "Parts Currency
TEXT(100), "Remark
END OF inrec.
DATA : v_file LIKE rlgrap-filename.
DATA gt_zgcs_foc LIKE zgcs_foc OCCURS 0 WITH HEADER LINE.
DATA gs_zgcs_foc LIKE zgcs_foc.
*File name ACCEPT--------------------------------------------------
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
*Company code
PARAMETERS: p_comp LIKE zgcs_imei-company OBLIGATORY.
PARAMETERS: pcfile LIKE rlgrap-filename OBLIGATORY LOWER CASE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
PARAMETERS: HQfile RADIOBUTTON GROUP b2.
SELECTION-SCREEN COMMENT 7(20) text-101 FOR FIELD HQfile.
SELECTION-SCREEN POSITION 31.
PARAMETERS: SUBfile RADIOBUTTON GROUP b2.
SELECTION-SCREEN COMMENT 37(20) text-102 FOR FIELD SUBfile.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK box WITH FRAME.
SELECTION-SCREEN: COMMENT /2(40) text-011, COMMENT 42(40) text-001,
ULINE,
COMMENT /2(40) text-012, COMMENT 42(40) text-002,
COMMENT /2(40) text-013, COMMENT 42(40) text-003,
COMMENT /2(40) text-014, COMMENT 42(40) text-004,
COMMENT /2(40) text-015, COMMENT 42(40) text-005,
COMMENT /2(40) text-016, COMMENT 42(40) text-006,
COMMENT /2(40) text-017, COMMENT 42(40) text-007,
COMMENT /2(40) text-018, COMMENT 42(40) text-008,
COMMENT /42(40) text-009.
SELECTION-SCREEN END OF BLOCK box.
* -- AT SELECTION SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pcfile.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = space
def_path = 'C:\'
mask = ',*.txt,*.TXT.'
mode = 'O'
title = ' '
IMPORTING
filename = pcfile
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
*-----------------------------start--------------------------------
START-OF-SELECTION.
CLEAR: read_cnt, update_cnt, error_cnt.
REFRESH gt_zgcs_foc. CLEAR gs_zgcs_foc.
PERFORM file_upload_from_pc.
SORT gt_zgcs_foc.
DELETE ADJACENT DUPLICATES FROM gt_zgcs_foc
COMPARING COMPANY CUSTOMER PART_CODE REF_NO REF_DATE.
*// customer code check
DATA: LT_ZESTD LIKE ZESTD OCCURS 0 WITH HEADER LINE.
IF NOT gt_zgcs_foc[] IS INITIAL.
SELECT COMPANY CUSTOMER CURRENCY
INTO CORRESPONDING FIELDS OF TABLE LT_ZESTD
FROM ZESTD
FOR ALL ENTRIES IN gt_zgcs_foc
WHERE COMPANY = gt_zgcs_foc-COMPANY
AND CUSTOMER = gt_zgcs_foc-CUSTOMER.
ENDIF.
SORT LT_ZESTD BY COMPANY CUSTOMER.
*// part code check
DATA: LT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
IF NOT gt_zgcs_foc[] IS INITIAL.
SELECT *
INTO TABLE LT_MARA
FROM MARA
FOR ALL ENTRIES IN gt_zgcs_foc
WHERE MATNR = gt_zgcs_foc-PART_CODE.
ENDIF.
SORT LT_MARA BY MATNR.
LOOP AT gt_zgcs_foc.
*// customer code check
READ TABLE LT_ZESTD WITH KEY
COMPANY = gt_zgcs_foc-COMPANY
CUSTOMER = gt_zgcs_foc-CUSTOMER.
IF SY-SUBRC <> 0.
WRITE:/'Invalid Customer code ',
gt_zgcs_foc-COMPANY, ' ',
gt_zgcs_foc-CUSTOMER.
STOP.
ENDIF.
*// part code check
READ TABLE LT_MARA WITH KEY MATNR = gt_zgcs_foc-PART_CODE
BINARY SEARCH.
IF SY-SUBRC <> 0.
WRITE:/ 'Invalid part code ', gt_zgcs_foc-PART_CODE.
STOP.
ENDIF.
*// REF_NO
TRANSLATE gt_zgcs_foc-REF_NO TO UPPER CASE.
SHIFT gt_zgcs_foc-REF_NO LEFT DELETING LEADING SPACE.
IF gt_zgcs_foc-REF_NO = SPACE.
WRITE:/'Ref No. is blank'.
STOP.
ENDIF.
*// REF_DATE
IF gt_zgcs_foc-REF_DATE = 0.
WRITE:/'Invalid Ref Date'.
STOP.
ENDIF.
*// QTY
* IF gt_zgcs_foc-QTY CO ' 0123456789'.
* ELSE.
* WRITE:/ gt_zgcs_foc-QTY, ' Invalid Qty value'.
* STOP.
* ENDIF.
ENDLOOP.
* Insert/Update table
* MODIFY zgcs_foc FROM TABLE gt_zgcs_foc.
INSERT zgcs_foc FROM TABLE gt_zgcs_foc.
IF sy-subrc EQ 0.
COMMIT WORK.
DESCRIBE TABLE gt_zgcs_foc LINES update_cnt.
error_cnt = read_cnt - update_cnt.
ELSE.
ROLLBACK WORK.
error_cnt = read_cnt - update_cnt.
ENDIF.
ULINE.
FORMAT COLOR 3.
WRITE: / 'Read count :', read_cnt.
WRITE: / 'Insert/Update count :', update_cnt.
WRITE: / 'Error count :', error_cnt.
FORMAT COLOR OFF.
*end-of-selection--------------------------------------------------
END-OF-SELECTION.
*& Form FILE_UPLOAD_FROM_PC
FORM file_upload_from_pc.
IF pcfile IS INITIAL.
WRITE: / 'SELECT UPLOAD FILE !'.
ELSE.
MOVE pcfile TO v_file.
* HQ file upload
IF HQfile EQ 'X'.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = v_file
filetype = 'DAT'
TABLES
data_tab = FOC_inrec
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
WRITE: / 'FILE UPLOAD :', sy-subrc.
ENDIF.
LOOP AT FOC_inrec.
ADD 1 TO read_cnt.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-customer
importing
output = FOC_inrec-customer.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-part_code
importing
output = FOC_inrec-part_code.
MOVE-CORRESPONDING FOC_inrec TO gs_zgcs_foc.
MOVE p_comp TO gs_zgcs_foc-company.
MOVE gs_zgcs_foc-qty TO gs_zgcs_foc-balan.
MOVE sy-uname TO gs_zgcs_foc-ERNAM.
MOVE sy-datum TO gs_zgcs_foc-ERDAT.
MOVE sy-UZEIT TO gs_zgcs_foc-ERZET.
* Source(1:HQ,2:SUB,0:Etc)
MOVE '1' TO gs_zgcs_foc-source.
APPEND gs_zgcs_foc TO gt_zgcs_foc.
ENDLOOP.
* SGE file upload
ELSE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = v_file
filetype = 'DAT'
TABLES
data_tab = inrec
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
WRITE: / 'FILE UPLOAD :', sy-subrc.
ENDIF.
LOOP AT inrec.
ADD 1 TO read_cnt.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = inrec-customer
importing
output = inrec-customer.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-part_code
importing
output = FOC_inrec-part_code.
MOVE-CORRESPONDING inrec TO gs_zgcs_foc.
MOVE p_comp TO gs_zgcs_foc-company.
MOVE gs_zgcs_foc-qty TO gs_zgcs_foc-balan.
MOVE sy-uname TO gs_zgcs_foc-ERNAM.
MOVE sy-datum TO gs_zgcs_foc-ERDAT.
MOVE sy-UZEIT TO gs_zgcs_foc-ERZET.
* Source(1:HQ,2:SUB,0:Etc)
MOVE '2' TO gs_zgcs_foc-source.
APPEND gs_zgcs_foc TO gt_zgcs_foc.
ENDLOOP.
ENDIF.
ENDIF.
ENDFORM.
*MODULE POOL::*
*& Module Name : Warranty Bill
*& Sub-Module : W/B
*& Description : Parts Q'ty Adjust(Sales & Warranty)
*& Program Name : ZRSWBP004
*& History
*& Date Author Reason
*& 2007.05.08 Song, Ji-Hyun Initial Coding Req.by WH.Song
*& Logic Process
* - CONDITIONS
* Company, Customer, Material
* - PROCESS
* Display,Insert,Update data in the T/B ZESP04
REPORT zrswbp004 NO STANDARD PAGE HEADING
MESSAGE-ID 00
LINE-SIZE 250
LINE-COUNT 50.
* G L O B A L V A R I A B L E S *
TABLES : zesp04.
DATA : BEGIN OF itab_list OCCURS 0,
company LIKE zesp04-company,
customer LIKE zesp04-customer,
material LIKE zesp04-material,
adj_date LIKE zesp04-adj_date,
adjust LIKE zesp04-adjust,
reason LIKE zesp04-reason,
reason_code LIKE zesp04-reason_code,
doc_no LIKE zesp04-doc_no,
in_date LIKE zesp04-in_date,
create_id LIKE zesp04-create_id,
END OF itab_list.
DATA : itab_upload LIKE TABLE OF zesp04 WITH HEADER LINE.
DATA : s_mode(10).
DATA : table_name(10) VALUE 'ZESP04'.
DATA : tot_cnt TYPE i.
DATA : ref_flag(1).
* M A C R O D E F I N E *
DEFINE conversion_kunnr.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = &1
importing
output = &1.
END-OF-DEFINITION.
DEFINE conversion_material.
call function 'CONVERSION_EXIT_MATN1_INPUT'
exporting
input = &1
importing
output = &1.
END-OF-DEFINITION.
* S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE title1.
PARAMETERS : company LIKE zesp04-company MEMORY ID buk MODIF ID v1
OBLIGATORY.
SELECT-OPTIONS : customer FOR zesp04-customer MEMORY ID kun
MODIF ID v1.
SELECT-OPTIONS : material FOR zesp04-material MEMORY ID mat
MODIF ID v1.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 3.
SELECTION-SCREEN COMMENT 3(12) text-002 MODIF ID v2.
PARAMETERS : up_flag AS CHECKBOX MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(12) text-001 MODIF ID v2.
PARAMETERS : p_fname(300) LOWER CASE MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE title2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(53) text-003 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(10) text-004 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(12) text-005 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(12) text-006 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(15) text-007 MODIF ID v2.
PARAMETERS : df1 TYPE c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN COMMENT 24(13) text-012 MODIF ID v2.
PARAMETERS : df2 TYPE c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN COMMENT 41(11) text-013 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(14) text-008 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(11) text-009 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(14) text-010 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(10) text-011 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
INCLUDE zrswbp004_pbo.
INCLUDE zrswbp004_pai.
INITIALIZATION.
title1 = ' Parts Quantity Adjustment '.
title2 = ' Text File Layout '.
* S T A R T O F S E L E C T I O N *
TOP-OF-PAGE.
PERFORM write_header.
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM write_header.
START-OF-SELECTION.
IF up_flag = 'X'.
PERFORM upload_data.
ELSE.
PERFORM select_data.
SET PF-STATUS 'PF01' EXCLUDING 'SAVE'.
PERFORM display_data.
ENDIF.
AT USER-COMMAND.
PERFORM user_command.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
PERFORM get_filename.
*& Form SELECT_DATA
* Select Data for Display
FORM select_data.
SELECT * FROM (table_name)
INTO CORRESPONDING FIELDS OF TABLE itab_list
WHERE company = company
AND customer IN customer
AND material IN material.
CHECK sy-subrc <> 0.
WRITE: 'No data found with your option.'.
ENDFORM. " SELECT_DATA
*& Form DISPLAY_DATA
* Display Data following Condition
FORM display_data.
LOOP AT itab_list.
FORMAT COLOR 2 INTENSIFIED.
WRITE : / '|' NO-GAP.
WRITE : (07) itab_list-company CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-customer CENTERED NO-GAP, '|' NO-GAP,
(20) itab_list-material CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-adj_date CENTERED NO-GAP, '|' NO-GAP,
(15) itab_list-adjust RIGHT-JUSTIFIED NO-GAP, '|'
NO-GAP,
(55) itab_list-reason LEFT-JUSTIFIED NO-GAP, '|' NO-GAP,
(11) itab_list-reason_code CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-doc_no CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-in_date CENTERED NO-GAP, '|' NO-GAP,
(12) itab_list-create_id CENTERED NO-GAP, '|' NO-GAP.
FORMAT INTENSIFIED OFF.
HIDE itab_list.
ENDLOOP.
WRITE : / sy-uline(171).
ENDFORM. " DISPLAY_DATA
*& Form WRITE_HEADER
* Write Report Header
FORM write_header.
DATA : line(1024).
CLEAR line WITH '-'.
DESCRIBE TABLE itab_list LINES tot_cnt.
FORMAT INTENSIFIED ON.
WRITE : 15 'Parts Quantity Adjustment'.
SKIP.
WRITE : / 'Total Count : ', tot_cnt.
WRITE : /.
WRITE : (171) sy-uline.
WRITE : / '|' NO-GAP.
WRITE : (07) 'Company' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Customer' CENTERED NO-GAP, '|' NO-GAP,
(20) 'Material' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Adj. Date' CENTERED NO-GAP, '|' NO-GAP,
(15) 'Adjust' CENTERED NO-GAP, '|' NO-GAP,
(55) 'Reason' CENTERED NO-GAP, '|' NO-GAP,
(11) 'Reason Code' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Doc No' CENTERED NO-GAP, '|' NO-GAP,
(10) 'IN DATE' CENTERED NO-GAP, '|' NO-GAP,
(12) 'CREATE ID' CENTERED NO-GAP, '|' NO-GAP.
WRITE : /(171) sy-uline.
FORMAT INTENSIFIED OFF.
ENDFORM. " WRITE_HEADER
*& Form UPLOAD_DATA
* Data Upload from File
FORM upload_data.
DATA : l_filename LIKE rlgrap-filename,
temp_dateformat TYPE dateformat.
IF df1 = 'X'.
temp_dateformat = 'YYYY.MM.DD'.
ELSE.
temp_dateformat = 'DD.MM.YYYY'.
ENDIF.
MOVE p_fname TO l_filename.
CHECK l_filename NE space.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = l_filename
filetype = 'DAT'
dat_d_format = temp_dateformat
TABLES
data_tab = itab_list
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9.
IF sy-subrc NE 0.
MESSAGE s000 WITH 'File upload is failed!'.
STOP.
ELSE.
CLEAR : itab_upload, itab_upload[].
LOOP AT itab_list.
MOVE-CORRESPONDING itab_list TO itab_upload.
conversion_kunnr itab_upload-customer.
conversion_material itab_upload-material.
itab_upload-mandt = sy-mandt.
itab_upload-in_date = sy-datum.
itab_upload-create_id = sy-uname.
*>>>>Insert by GSCHOI 2007.11.08
IF itab_list-adj_date+0(6) NE sy-datum+0(6).
MESSAGE i368 WITH 'Adjust month must same as current month!'.
ROLLBACK WORK.
STOP.
ENDIF.
*<<<<End
APPEND itab_upload.
INSERT INTO (table_name) VALUES itab_upload.
IF sy-subrc EQ 0.
CONTINUE.
ELSEIF sy-subrc EQ 4.
MESSAGE s368 WITH 'Duplicated Data Error!'.
ROLLBACK WORK.
STOP.
ELSE.
MESSAGE s368 WITH 'File Error!'.
ROLLBACK WORK.
STOP.
ENDIF.
ENDLOOP.
ENDIF.
IF sy-subrc EQ 0.
MESSAGE s368 WITH 'Uploaded Successfully!'.
ENDIF.
ENDFORM. " UPLOAD_DATA
*& Form USER_COMMAND
* User Command Execution in Screen 1000
FORM user_command.
MOVE-CORRESPONDING itab_list TO zesp04.
CASE sy-ucomm.
WHEN 'INSERT'.
PERFORM insert_item.
WHEN 'UPDATE'.
PERFORM update_item.
WHEN 'DISPLAY'.
PERFORM display_item.
WHEN 'REFRESH'.
PERFORM refresh_list.
ENDCASE.
IF ref_flag = 'Y'.
PERFORM refresh_list.
CLEAR ref_flag.
ENDIF.
ENDFORM. " USER_COMMAND
*& Form INSERT_ITEM
* When Clicking Insert Button
FORM insert_item.
CLEAR : s_mode.
CLEAR : zesp04.
s_mode = 'INSERT'.
CALL SCREEN '100'.
ENDFORM. " INSERT_ITEM
*& Form UPDATE_ITEM
* When Clicking Update Button
FORM update_item.
CLEAR : s_mode.
s_mode = 'UPDATE'.
CALL SCREEN '100'.
ENDFORM. " UPDATE_ITEM
*& Form DISPLAY_ITEM
* When Clicking Display Button
FORM display_item.
CLEAR : s_mode.
s_mode = 'DISPLAY'.
CALL SCREEN '100'.
ENDFORM. " DISPLAY_ITEM
*& Form REFRESH_LIST
* When Clicking Refresh Button or Returning Display Screen
FORM refresh_list.
CLEAR : itab_list, itab_list[].
PERFORM select_data.
sy-lsind = sy-lsind - 1.
PERFORM display_data.
ENDFORM. " REFRESH_LIST
*& Form GET_FILENAME
* Get Filename
FORM get_filename.
DATA: l_fname LIKE ibipparms-path .
DATA : p_name LIKE sy-repid.
p_name = sy-repid.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = p_name
dynpro_number = sy-dynnr
field_name = ''
IMPORTING
file_name = l_fname.
p_fname = l_fname.
ENDFORM. " GET_FILENAME
Edited by: Matt on Nov 24, 2008 11:24 AM - surrounded the ABAP with tagsHi,
Use SUBMIT statement in your first Report zrswbgcs009 at the end, to call the Modulepool program zrswbp004.
do a search in SDN you will get lot of threads on SUBMIT statement with selection screen.
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
http://help.sap.com/saphelp_nw04/Helpdata/EN/9f/dba51a35c111d1829f0000e829fbfe/content.htm
Regards
Bala Krishna -
Calling a report from module pool program
Hi all,
I had a requirement where I need to call a report from the module pool program where in when we click REPORT button, it should display the report output in the another screen.
Can we do by calling screen after pushing REPORT button. If so, where we should write that code ( In pbo or pai). Please give me an idea.
Thanking you,
Regards,
Murali Krishna TUse submit syntax.
Press F1 on submit, Donot use return statement with it.
If so, where we should write that code ( In pbo or pai).
Please understand about these two events before doing the requirement. -
Calling a report from Module Pool
While calling a report from the module pool I'm not able to display th alv. The skeleton of the ALV is coming. But the data and headings are also not displayed.
But where as calling the same program from a report it is coming properly. can somebody please guide me where did I go wrong?MODULE user_command_1001 INPUT.
w_ok_code = ok_code.
CLEAR ok_code.
CASE w_ok_code.
WHEN 'BACK'.
LEAVE PROGRAM .
WHEN 'CREATE'.
CALL TRANSACTION 'Z_FIRST_TIME'.
WHEN 'SYNC'.
CALL TRANSACTION 'Z_SYNC'.
WHEN 'APPROVE'.
SUBMIT zds_xx_approval_status WITH po_aname EQ sy-uname AND RETURN.
WHEN 'OVERVIEW'.
PERFORM show_all_reqids.
ENDCASE.
ENDMODULE. -
HOw to find Report program associated module pool program?
HOw to find Report program associated module pool program?
I.e
Me21n is the tcode.I want to find screens related to this tcode.
Associated report program is RM_MEPO_GUI.(It has no screens hence it is a report program).
(if module program is attached to tcode,i can easily find entries in d020s)
Here report program is calling a module pool program SAPLMEGUI(Has screens).
If i give the Tcode Me21n,i want to list out all the screens of it..
Can u give any suggestion....Hi Sampath.
Manually i can see it (by seeing in system-status)..
programmatically i want to know..
for ex:if u take Tcode:Va01
we can get program (dialog) and tcode in Tstc table .
If we know the program name(dialog), we can find program and screens in d020s table.
Va01 is atatched to a module pool program..No problem to find screens..
In case of me21n,
It is atatched to report program(calling module pool program)..
Here i could not be able to get the screens ..
I think u undrstood my problem.. -
How to use module pool program in my custom report?
Hi,
I am developing a custom report in abap. I want to fetch data from a standard module pool program.I want output of this standard module pool program to be used in my standad report.Submit cannot be used with module pool programs. How can i do this?Can u please suggest?HI friend,
For this you can directly use the table fields i.e. each and every module pool screen fields will be having the table name along with its fields (which you can see by double clicking the field and selecting technical settings button) and since it is a standard module pool program that will get populated directly. So you can get the screen field values directly from the table. I think this will help. Please try and let us know wheather it is solved.
Thanks and regards,
Sri Hari Anand Kumar
Edited by: srihari.kumar on Apr 6, 2011 3:31 PM -
Prob in Report output through Module Pool
Hi,
I have developed Module Pool and in tht screen 100 , in PAI under fcode 'APPEND' i am appending record into the itab.
while user press 'VIEW' it will execute f-code VIEW and display records of itab as a report output.
now on the report output, for each records i have CHECKBOX ,while they press DELETE button on application toolbar, marked checkbox details should get deleted from report output.
But my problem is while i am press DELETE button in report output it is not calling screen 100 PAI or PBO .then how will i delete records , can anybody suggest me ?
Thanks.Are you able to see the Delete Button, If so then it Definitely comes to AT USER-COMMAND.
WHEN 'VCART'.
LEAVE TO LIST-PROCESSING.
SET PF-STATUS 'LIST'. "This is for List status here you set the Delete button backbutton
loop at i_cart.
WRITE:/01(01) '|', I_CART-CHECK AS CHECKBOX,05(01) '|',
06(40) I_CART-CMAKTX,46(01) '|',
47(30) I_CART-LENGTH,77(01) '|',
78(07) I_CART-CHNG_QTY,85(01) '|',
86(03) WS_UOM,89(01) '|',
90(10) I_CART-LENGTH_LIN,100(01) '|',
101(07) WS_P1,108(01) '|'.
WRITE:/01(108) SY-ULINE.
endloop.
AT USER-COMMAND.
case sy-ucomm.
WHEN 'DELETE'.
" Here you need to delete the record.
"if you want to go back
LEAVE LIST PROCESSING.
"then you will go to main screen,
endcase.
try this approach.. -
Call report selection screen in module pool program with tab strip control
Hi,
Could anyone explain in detail to call report selection screen in module pool program with tab strip control.
Thanks
ManoHi,
Refer std program:
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
Call your program with SUBMIT stmt form module program.
Reward points if this Helps.
Manish -
Please provide me the steps to implement a report through a module pool(by se38).................
Thanks and Regards
Suman Karmakar
Edited by: suman.career08 on May 27, 2011 10:13 AM
Moderator Message: Please search for available information. Thread Locked.
Edited by: kishan P on May 27, 2011 1:44 PMAre you able to see the Delete Button, If so then it Definitely comes to AT USER-COMMAND.
WHEN 'VCART'.
LEAVE TO LIST-PROCESSING.
SET PF-STATUS 'LIST'. "This is for List status here you set the Delete button backbutton
loop at i_cart.
WRITE:/01(01) '|', I_CART-CHECK AS CHECKBOX,05(01) '|',
06(40) I_CART-CMAKTX,46(01) '|',
47(30) I_CART-LENGTH,77(01) '|',
78(07) I_CART-CHNG_QTY,85(01) '|',
86(03) WS_UOM,89(01) '|',
90(10) I_CART-LENGTH_LIN,100(01) '|',
101(07) WS_P1,108(01) '|'.
WRITE:/01(108) SY-ULINE.
endloop.
AT USER-COMMAND.
case sy-ucomm.
WHEN 'DELETE'.
" Here you need to delete the record.
"if you want to go back
LEAVE LIST PROCESSING.
"then you will go to main screen,
endcase.
try this approach.. -
Mss reports - add module pool (dialog) to the list
Hi experts,
I need to add new reports to MSS reporting.
Is it possible to add module pool (dialog) to the MSS reports list?
I got an error when executing the program " no object stored within selected period".
The portal seems like it cannot trigger the data from backend.
Is it related to dialog program that we use?
What is the best solution because we need the manager to choose from dropdown button through the MSS reports.
Rgds,
Nanie ArianieSolved
Program error -
How to trigger abap report from module pool
hi,
continuing with this link
table control this is done (Module pool )
there were two buttons (accept and delete )in the module pool..so when the user clik 'accepts ' the records (from table control ) then it shud call abap report which will run in background..
so how do we pass the values selected from table control to the abap report in one go.....as only one background job has to run..say if there are 10 entries then it shud take all the 10 entries and trigger the abap report where it will do the processing with the selected 10 records in the abap report.
Thanks
Mohan..Declare the parameters of the report as select options and call it using submit statement.
link:[http://help.sap.com/abapdocu_70/en/ABAPSUBMIT_VIA_JOB.htm]
Maybe you are looking for
-
Is it possible to display an animated GIF file on a form that plays once and then stops and if so HOW???!!!!! null
-
Can't connect to network (wireless)
Hello, I have a Dell Vostro 1500 with an Intel pro 3985 wireless card. The driver that comes with the latest kernel is installed. Running lsmod shows iwl3945. ifconfig wlan0: wlan0 Link encap:Ethernet HWaddr 00:1C:BF:99:B1:DE UP BROADCAST MULTICAST M
-
Navigation Problem in JSF - Urgent, pls help
hi, I have a problem while navigating into a popup using a custom commandLink which opens the popup.The problem is that when i close the popup and return to the parent JSF and click any button or link in the parent, the page navigates to the page tha
-
DMS: Objectlink to more than 50 inspection methods(QMBDOC) gives dump
Dear All, I have a requirement of attaching more than 50 objectlink for inspection methods to one document info records. So when i attach 40 to 50 inspection methds by BDC program or manualy & then i again try to attach one more inpection method obje
-
IChat doesn't open--period. Bus error?
I just received my new iMac (Intel Core Duo, woohoo!) on Saturday, and the very first time I tried to open iChat was about an hour ago. All I got was a couple bounces, and then.. failure. Rebooting doesn't make any difference. I tried opening it in T