Module pool: taking checkbox in tab control

i want to take check box in tab control. when i click on button selectall--all checkbox checked and when i click deselect button -all checkbox deselected.-plz send coding for it-

Hello Sunil,
IN PAI set your FLAG = 'X' WHEN 'SELECTALL' fcode is pressed.
IN PBO.
MODULE select_all_check_box.
LOOP AT itab WITH CONTROL tbcl.
ENDLOOP.
MODULE select_all_check_box.
IF FLAG = 'X'.
Modify table itab transporting sel.
endif.
ENDMODULE.
Where SEL is the field that you used for check box.
Hope you problem is solved.
Cheers,
Suvendu

Similar Messages

In module pool program - i want to control size of screen.

Hi,
In module pool program , I am handling 2 screen . while calling the 2 nd screen , i want to display the window size as i required.
Plz help me.
Regards,
Rani.

Hi,
Specify the positions as
CALL SCREEN dynnr
[STARTING AT col1 lin1
[ENDING AT col2 lin2]].
By default, the screens of all dynpros of the called dynpro sequence are displayed in the current window. Use addition STARTING AT to open a modal dialog window.
Addition
... STARTING AT col1 lin1 [ENDING AT col2 lin2]
Effect
Use addition STARTING AT to open a new popup level and to display all screens of the called dynpro sequence in a modal dialog window. The upper left corner of the dialog window is determined by the values col1 and lin1 for column and line. The values refer to the window with popup level 0. The lower right corner is set automatically or you can use col2 and lin2 to specify it after ENDING AT. For col1, lin1, col2 and lin2, data objects of type i are expected. The values of col1, lin1 should be smaller than those of col2, lin2, because otherwise the behavior is undefined. The maximum popup level is 9.
Pls reward points if solved your issue.
Regards,
Renjith Michael.

Module Pool table controle row level prob

Hi Experts,
I am working in a module pool program where in table controle i want a perticular row should become in display mode if a specific field is NE SPACE. is it possible if possible than please sugest me how.
Thanks and Regards,
D Tarun Kumar

In this case all the rows will be in display mode
Exactly My Requirement I am describing with example
Suppose in table control I have three Records and the first field is main field which is if initial than the row should in change mode otherwise is should be in display mode.
Field1          Field2          Field3          Field4          Field5
1abc2          1abc3          1abc4          1abc5          Record 1
2xyz1          2xyz2          2xyz3          2xyz4          2xyz5          Record 2
3pqr2          3pqr3          3pqr4          3pqr5          Record 3
So here the second rowu2019s first field is not initial so I need here in table control the second row should be in display mode and next first and second row should be in change mode.
Now You tell me is it possible or not if possible than please suggest me what I have to do
Thanks & regards,
D Tarun Kumar
Edited by: Devalla T Kumar on Oct 24, 2009 9:17 AM

Tab key does work in module pool

Dear,
Please, someone already passed or saw the following situation:
In a module pool Z, in a tab item creation (there are several columns to be filled), pressing the TAB key, the cursor is directed to the next empty field, the moment presciono the enter key or realize any screen action and I try to fill the second line, to add one more item, the TAB key does not "work" properly, where the scrollbar should follow the cursor.
I checked the characteristics of the screen.
Thanks

Dear,
Please, someone already passed or saw the following situation:
In a module pool Z, in a tab item creation (there are several columns to be filled), pressing the TAB key, the cursor is directed to the next empty field, the moment presciono the enter key or realize any screen action and I try to fill the second line, to add one more item, the TAB key does not "work" properly, where the scrollbar should follow the cursor.
I checked the characteristics of the screen.
Thanks

Updating custom table through table control in module pool

Hi
I am entering a data in the module pool screen in a table control . The functionality is that whatever i enter in a row gets updated in a custom table in the database with the same values . My problem is that when i enter some values and press the save button on the module pool screen , the data gets updated on the table but gets invisible from the module pool screen . The user wants the data to be displayed even after it has been saved ..if anyone can help on this ...
thanks

hi,
Check whether u have activated the report and screen.

How to get rid of empty space in module pool screen?

Hello Experts,
In module pool, I have 2 table controls inside 2 separate boxes in the same screen. Based on some conditions I hide the first table control. It's all working fine. But the space where first table is created remains blank in the screen. I don't want that.If the first table control is hidden the second table control should occupy the empty space. I do not want empty space in the screen.
How can I acheive this.Is there anything I can set in the screen attribute level.
Thanks.
Yasin.

Hi Yasin,
As you said you have 2 sub screen areas and also 2 subscreens.
when hide the First subscreen from First Subscreen area, you need to assign the second subscreen on to the first subscreen area and a dummy subscreen on to second subscreen area, this is a kind of work around and bit tricky playing with screen elements
in Top Include
data dynnr type sy-dynnr value '100' " your default Subscreen number
in PBO
call subscreen sub1 including sy-repid dynnr1 " First Sub screen area
call subscreen sub2 including sy-repid dynnr2 " Second sub screen area
in PAI
module call_dyn_number.
in program.
case ok_code.
when 'HIDE'. " When you hide the first table control
dynnr1 = '200' " This is your second table control containing Screen number
dynnr2 = '300'. "This is a Dummy Screen Number which doesnt contain any screen elements so output is plain
" Note: This is a crude IDEA only as you try to implement you need to adjust this for the expected outcome
" I implemented this earlier but dont have complete ref at this moment
endcase.
Hope this serves your purpose
Cheerz
Ram

Module Pool Programming Guide

Hi,
I have no specific question regarding the module pool program, but want to learn it from beginning.
can anyone help me by sending the Module pool programming material and table control.
Thanks,

Hi
hope it will help you.
reward if help.
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf

Problem in Module Pool Program

Hi All,
I got one problem in Module pool program.Im using table control.when selected multiple coloms by table control option left top.
when I want to de-select one by one,unable to de-select. Please suggest me.
thank you,
Anu.

Thank You All.
Solved my self.
The coding as below.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN SUB INCLUDING SY-REPID '110'.
LOOP AT GT_ITAB INTO WA WITH CONTROL VCONTROL.
    MODULE SET.
    MODULE STATUS_0100.
ENDLOOP.
PROCESS AFTER INPUT.
   CALL SUBSCREEN SUB.
LOOP AT GT_ITAB .
    CHAIN.
      FIELD WA-EBELN.
      FIELD WA-EMATN.
      FIELD WA-EBELP.
      FIELD WA-MATNR.
      FIELD WA-MARK.
      MODULE MODIFY ON CHAIN-REQUEST.
    ENDCHAIN.
ENDLOOP.
    MODULE USER_COMMAND_0100.
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'SAVE'.
      PERFORM SAVE_VARIANT.
      PERFORM VARIANT_EXISTS.
    WHEN 'SEL'.
      LOOP AT GT_ITAB INTO WA.
        WA-MARK = 'X'.
        MODIFY GT_ITAB FROM WA .
      ENDLOOP.
endmodule.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ZTESTING'.
SET TITLEBAR 'ZTEST'.
SET PF-STATUS 'ZTESTING' EXCLUDING IT_EXTAB.
MOVE:WA-EBELN TO EKKO-EBELN,
       WA-EBELP TO EKPO-EBELP,
       WA-MATNR TO WA-MATNR.
MOVE:WA-EMATN TO WA-EMATN.
MODIFY GT_ITAB FROM WA INDEX VCONTROL-CURRENT_LINE.
VCONTROL-LINES = SY-DBCNT.
ENDMODULE.                 " STATUS_0100 OUTPUT
MODULE SET OUTPUT.
SET CURSOR FIELD CURSORFIELD OFFSET POS.
ENDMODULE.                 " SET OUTPUT
Thank You,
Anu.

Reusing Standard Classes for Module pool Programming using Abap Objects

Hi.,
    I debugged the ME21n transaction and found a number of classes such as
         CL_BASIC_MODEL_VIEW_MM
         CL_GENERIC_MODEL_VIEW_MM
         CL_GENERIC_VALUE_MODEL_MM
         CL_MODEL_CONTAINER_MM
         CL_MODEL_CONTROL_VIEW_MM
         CL_MODEL_VIEW_MM
         CL_TABLE_MODEL_MM
         CL_TABLE_MODEL_TREE_VIEW_MM
         CL_VALUE_MODEL_MM
         CL_VALUE_MODEL_VIEW_MM
         CL_BASIC_MODEL_VIEW_MM
        CL_COMPOSITE_SCREEN_VIEW_M
        CL_CUSTOM_CONTROL_VIEW_MM
        CL_EXPAND_BUTTON_VIEW_MM
        CL_EXPAND_VIEW_MM
        CL_FOREIGN_APPLICATION_VIE
        CL_GENERIC_MODEL_VIEW_MM
        CL_GRID_VIEW_MM
        CL_MODEL_CONTROL_VIEW_MM
       CL_MODEL_VIEW_MM
       CL_SCREEN_VIEW_MM
      CL_SETUPVIEW_BUILDER_MM
        CL_SIMPLE_TREE_VIEW_MM
         CL_TABLE_MODEL_TREE_VIEW_M
         CL_TABLE_VIEW_CONTAINER_MM
         CL_TABLE_VIEW_MM
         CL_TABSTRIP_VIEW_MM
         CL_TC_BUTTON_VIEW_MM
         CL_TC_ITEM_VIEW_MM
         CL_TOGGLE_VIEW_MM
         CL_VALUE_MODEL_VIEW_MM
         CL_DEFAULT_CONTROLLER_MM
         CL_CONTROLLER_MM
         CL_ATP_CONTROLLER_MM
         CL_DRAG_DROP_CONTROLLER_MM ..
               How we can reuse these classes to build a custom module pool program which supports MVC architecture as used in enjoy SAP transactions .I am very much confused from where to start .
Guide me on this.I want to create a simple module pool program with Subscreens, Table Controls and Tabstrips ..
Regards.,
S.Sivakumar

Have you got any solution on this.
because i want to use CL_GRID_VIEW_MM->handle_on_data_changed for one of my development related to ME51N.

Posnr values in module pool

Hello Experts,
I have a module pool where in a table control I have fields like posnr matnr material description and quantity.
In this posnr field I want values like 10 20 upto 200.which has a increment in 10.
I have added this logic but this posnr values are not getting displayed once I press enter.
How can I display all these values from 10 to 200 even after pressing enter.
Thanks and Regrds,
Nikhil.

Hi,
Please check if ur logic is getting triggered when enter is pressed.
Then if so, at the end of internal table updation, update the number of table control lines as follows:
DESCRIBE TABLE t_internal_table LINES TC_TABL_CTRL-LINES.
Regards,
Sasi.

Call report selection screen in module pool program with tab strip control

Hi,
Could anyone explain in detail to call report selection screen in module pool program with tab strip control.
Thanks
Mano

Hi,
Refer std program:
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
Call your program with SUBMIT stmt form module program.
Reward points if this Helps.
Manish

Checkbox in custom control(module pool)

Hi Experts,
In my module pool i have used function module 'set_table_for_first_display'.
I am displaying internal table having field for checkbox in custom control .
When user clicks any checkbox value 'X' is not getting populated in checkbox field in internal table for that particular row.
Please suggest,
Regards,
Kaustubh.

Hi,
Just check the Field Catalog you have maintained for the List and check for the Options.
also in the Grid Layout that you are maintaining just try these:
data:   g_layout        TYPE lvc_s_layo,           " Grid Layout
constants:    c_flag(4)       TYPE c VALUE 'FLAG',       " FLAG field
                    c_a             TYPE c VALUE 'A',              " Value 'A'
In building layout:
g_layout-sel_mode    = c_a.
g_layout-excp_fname = c_flag.
Edited by: Neha Shukla on Nov 17, 2008 6:48 AM

How to insert tabstrip control in module pool screen painter

Hi all!
plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.

To insert tabstrip just open layout of screen and press on the tabstrip button there .
Use this souce code further to activate it .
CONTROLS tabstrip TYPE TABSTRIP.
DATA: okcode TYPE sy-ucomm,
dynnr TYPE sy-dynnr,
flag type flag,
active like tabstrip-activetab .
call SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
data: lv_okcode type syucomm.
lv_okcode = okcode.
clear okcode.
case lv_okcode.
WHEN 'TAB1'.
dynnr = '0110'.
WHEN 'TAB2'.
dynnr = '0120'.
WHEN 'TAB3'.
dynnr = '0130'.
WHEN 'TAB4'.
dynnr = '0140'.
WHEN 'TAB5'.
"check authorization, if authorization fails
flag = 'X'. "set the global flag
active = 'TAB1'. "store active tab in global variable
dynnr = '0110'. "set the screen number
WHEN 'BACK' or 'EXIT'.
leave program.
ENDCASE.
IF lv_okcode(3) = 'TAB'.
tabstrip-activetab = lv_okcode.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
IF tabstrip-activetab IS INITIAL OR
dynnr IS INITIAL.
tabstrip-activetab = 'TAB1'.
dynnr = '0110'.
ENDIF.
"set the activetab explicilty here
if flag eq 'X'. "from authorization failure
tabstrip-activetab = active. "'TAB1'
clear flag.
endif.
ENDMODULE. " STATUS_0100 OUTPUT

Checkbox issue in module pool program

Hi all,
I have a small issue in a module pool program using checkboxes. The requirement is that my basic list should contain the data with checkboxes and as per the selection by the user, the selected records should appear in the next screen (secondary list). But after selection, all the records barring the last record is appearing in my secondary list. Below are the screenshots of my program:
These are the global variables I declared:
The layout for the basic list is as shown. The function code is cbox for checkbox.
The flow logic :
The code for user-command:
Now on executing the program,
As you can see, sales orders 4970,4972,4974 and 4975 are selected. So after clicking NEXT, in the secondary list , the data for these selected sales orders from VBAP table should come up. But instead, the records from 4970, 4972 and 4974 are displayed except the last sales order which is 4975.
This is happening for all the records. The last selected sales order is not getting selected. Why is it so?
Thanks.
Manish

Hi Ali,
I have modified the code but there are still a couple of things which are confusing me. In the below screenshot you can see the modified version of the code:
Now to see what is going wrong, I tried to debug the code. I placed the breakpoint on 'NEXT' as shown. Then I selected the following sales orders and pressed NEXT.
In the debugger, IT_VBAK1 correctly holds the 2 selected values:
IT_VBAP displays the values correctly as well.
Now, this is where the issue is. On clicking the BACK button and selecting another sales order (4974):
IT_VBAK1 holds the additional sales order 4974 along with the previous ones as well:
IT_VBAP also displays the values accordingly as per the debugger:
But in the table control, the sales order 4974 is not displayed. Only the initial sales orders are displayed.
1) There is nothing wrong with the code as the debugger shows the records are held and displayed correctly by the internal tables. So what could be the reason for the data not to be displayed correctly in the table control? I also tried refreshing IT_VBAP after the BACK button, but still it isnt working.
2) Also, another thing I've seen that is after clicking the BACK button, when I select the sales orders, only data from 2 sales orders are displayed in the secondary list.
For example, if I select any number of sales orders and press NEXT, then all the data are displayed correctly in the secondary list. Once I click the BACK button and deselect all of them and then I checkbox 3 sales orders (more than 2), then only the records for 2 sales orders are displayed, not the 3rd one. Why is this happening?
Regards
Manish.

Problem in module pool with table control scrolling

hi,
i am using the table control in module pool,in the table control i have radion button for all the rows.
After i got the data into the table control ,if i select radio button and if i press vertical scroll bar button, that radio button is deselecting,how to solve this issue.
Please help me.

Hi
Generally we don't keep radiobuttons in table control for selecting the records
We keep check boxes for selecting the records
Radio button is used to select a single from a group of records and at a time only one is selected, where as checkboxes at a time you can select a single or multiple.
So use checkboxes and code correctly see the doc for Table control
syntax:
CONTROLS .
if you only want to determine the row of the table control. SY´-SUBRC allows you to check if the cursor is placed in a row of a table control.
u need to comment the performs of table control fields and write ur own perform statements. And u have to declare the table control fields as separate internal tables.
Go through this urls.
www.****************
www.sap-img.com
Check the below links.
http://www.planetsap.com/howdo_a.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
http://sap.niraj.tripod.com/id25.html
Reward points if useful
Regards
Anji

Module pool: taking checkbox in tab control

Similar Messages

Maybe you are looking for