More than one business partner in SNC for a user

Hi Gurus,
When creating relationship for an SNC planner in BP transaction i am able to assign more than one business partners, However when i log into webui i get an error saying BP is not unique and first one is taken. We have a requirement for users to plan for more than one vendors, how can i achieve this if only one BP is allowed on webui?
J.

Hey Juraj .. yeah man, I will send an email later on ..
But your issue seems to be interesting. Just to understand better, you are trying to implement VMI (RR) scenario and you want to have more than 1 organization (BP) for the Supplier side -- meaning you want to group multiple plants into their multiple BPs. I don't understand the reason behind this; why would have you more than 1 BP for the same vendor organization ?? Unless we are talking about a marketplace kind of a setup -- where SNC is being setup for multiple vendors serving multiple customers? Is that the case?
Anyway, I don't know of any standard SNC procedure to achieve your objective. Once option that comes to mind is control access by user -- so, you will have still have only 1 BP for all the Ship-from locations but in the user authorization (C_APO_LOC and/or C_APO_PROD) you control what locations this user can actually view. One other alternative is to investigate the SELECTION MODE/OBJECTS -- but I haven't played with it to understand it. Maybe it might address your need.. Let me know how you end up resolving this...
Mahesh

Similar Messages

  • Using more than one Business area in the same report

    Hi,
    Is it possible / recommended to use more than one business area in the same report.
    For example, I have a sales (business area sales) report on one tab and a rebates(rebates business area) report on a second tab.
    Thanks

    Hello
    Possible: yes
    Recommended: no
    This can certainly be done and Discoverer will not prevent you from having reports that use different business areas as you describe.
    However, for management and security purposes it does not make for ease of use. As you know a user has the ability to share a workbook with another user. If they do this then ALL reports within that workbook are shared. If the receiving user does not have access to one or more of the business areas then some reports will run and some will not. This can be very confusing to an end user and a possible nightmare to administer.
    My recommendation would be to have a workbook per business area and not mix.
    If there is more than one business area per functional area, for example sales and returns, then so long as the users have access to both business areas then you could use a common workbook.
    Personally I would not even do this, so my strongest advice would be to have all reports in a workbook written against the same business area.
    Hope this helps
    Michael

  • More than one business component (views) in the same JSP page

    Hi, I am trying to have more than one business component (views) in the same JSP page as Input Form.
    For example:
    There are two BC4J:
    Person:
    Code.
    Name.
    Address:
         Person_code
         Street.
         City.
    There is a master detail relationship between them and there is a link between both views in the application module.
    I want to create a JSP page with an Input form for both views. When the user decides to create a Person, I need to insert in both tables.
    Insert code and name into Person table.
    Insert Person_code, Street and City into Address table.
    It is possible to do in Forms but I am not sure if I can be able to do this in JDeveloper 10G.
    Thanks

    Sorry I lost the tabs
    Person has two attributes Code and Name.
    Address has three attributes Person_coden Street, City.

  • Can i create report using more than one Business Area ?

    Hi Gurus,
    Can i create report using more than one Business Area?.Could anybody tell me that report will work?.
    Vikram

    You should have no problem creating a report using more than one Business Area, we share folders across BAs all the time for ease of management. As long as your joins exist its not a problem.
    Matt Topper
    TUSC, The Oracle Experts
    [email protected]

  • HT1277 I have OS X 10.9.2 and have downloaded maverick. If I am sending an email message to one person, options for addresses  from my address book show up. However if I want to send it to more than one person, the address options for the others do not sh

    I have OS X 10.9.2. and have downloaded Maverick. If I am sending an email message to one person, options for addresses from my Address Book appear. However if I want to send it to more than one person, the potential addresses for the other persons do not show. Can you please help?

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Can you have more than one signature on your ipad  for different email accounts

    Can you have more than one signature on your ipad  for different email accounts.

    No, only one, I'm afraid.

  • Can you have more than one account on a Mac for FaceTime?

    Several of us would like use FaceTime on the same Mac, can we set up more than one account on the Mac?

    Each user should have his or her own login account with its own files and settings, including FaceTime settings. There should be no problem.

  • More than one step BC sets approval for PO's

    Good day All.
    I would like to know the bc set for more than one step of approvals for the Purchased Order. We know the without tha approval and one step approval for PO.
    /SAPSRM/C_PO_600_000_SP04     Purchase Order Without Approval
    /SAPSRM/C_PO_600_001_SP04     Purchase Order with One-Level Manager Approval
    You speedy response would be appreciated.
    Regards
    Makoro Manyathela

    Hi,
    You can configure many approval steps based on your business requirements.
    The BCSets /SAPSRM/C_PO_600_001_SP04 is just a sample configuration.
    Please go to IMG.
    SRM -> SRM Server -> Cross-Application basic Settings -> Business Workflow -> Process-Controlled Workflow -> Business Process Configuration -> Define Process Levels.
    Regards,
    Masa

  • How do I select more than one message at a time for archiving

    I want to archive multiple messages into one archive folder. How do I select more than one message at a time?

    Really appreciate the help. Many thanks

  • Can I install photoshop cs5 on more than one computer, if "owned" by a different user?

    I want to install my recently purchased photoshop cs5 on my macbook, as well as my imac. The only thing I worry about is that the macbook is in my name and the imac is technically in my dad's name, even though he only uses it to surf the web. The only reason he even bought the imac as opposed to anything else is so that I'd have a great place to edit photos. I really need it to be on both, will this work? Anyone have experience with this?

    This is what I was able to dig out
    May I use the software on more than one computer at a time?
    The activation process supports installation on two machines. The Adobe product license agreement allows the primary user to install the product on a primary computer and also on a home or laptop computer for his or her use, provided that the two copies are not used simultaneously. While the activation process supports installing and activating Adobe software on two machines, the usage of the product on the second computer is restricted to the user who licensed the software. Allowing others to use a second copy of the software violates the product license agreement.
    Doc on activating, deactivating http://kb2.adobe.com/cps/100/1008779.html

  • Optimizing more than one photo at a time for captivate?

    I'm creating half hour training modules that use roughly 100 slides with more than 100 photos/images during the 100 slides. The file works just fine but the IT department would like the download time to be quicker (was set to 75% downloaded to view and took 5 min, now set to 10% and runs after 60 seconds without tripping up or any other problems). The 10% works perfectly but the new concern is the bandwidth being used each time these modules will be downloaded to be viewed.
    We were recommended to optimize all of our images used in our captivate files. Because I've done 3 complete modules with more than 300 images, my concern is in the time it will take to individually optimize each of the photos I used and re-import them.
    Is there a way to use photoshop to optimize an entire group of photos at once? say a folder of photos?

    Hi there
    I wouldn't expect those side effects at all!
    I tried to post this earlier but the internet connection here is sporadic. I'll try again.
    I might suggest a test. Choose 5 images to use. Make copies of the images.
    Take the original unoptimized images and pop them into Captivate. Create a SWF and note the file size. Now optimize the other 5 and repeat the process. Then compare the two SWF files from Captivate. Difference in size? If not, perhaps optimizing beforehand is wasted effort.
    In Captivate, you are able to control things at the slide level or globally. Click Edit > Preferences... > Project node > SWF Size and Quality node.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • What program can i use to place more than one photo on a slide for a slideshow with music and text? I have my show on powerpoint but can I transfer that to imovie or idvd?

    I am trying to put together a slide show for my son's wedding. I would like to put 2 or more pictures on one slide and add music and some text. I tried Powerpoint for the slides but doesn't seem to be able to export to iphoto or imovie. In imovie and iphoto i can only do one picture / slide. Any thoughts? Thanks

    Alternatives to iPhoto's slideshow include:
    iMovie is on every Mac sold.
    Others, in order of price:
    PhotoPresenter  $29
    PhotoToMovie  $49.95
    PulpMotion  $129
    FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
    Final Cut Pro X $299
    It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

  • More than one CIF integration model possible for material?

    Hi Gurus,
    we want to have two different integration models (with non-overlapping selections) for materials to be able to have separate selections, but we cannot make it work.
    When we create them the first time and then activate them, everything works fine: both models send their products to APO in the initial load. However, if there are changes in products in both models, when we generate and then activate one of the models, the changes in the other one are lost: the generation-activation of the second model does not send any product to APO even if there were any changes in the master data (and we see the ALE pointers as processed in the table)
    Is there any workaround to solve this issue in a system without CIF pointers in BDCP2?? The ECC system is below the relevant releases and will not be upgraded in the near future.
    We could not find any mention to an existing limitation on the number of models being one neither in OSS notes nor the help pages.
    thanks a lot,
    Pablo

    Pablo,
    It is common to have multiple Integration Models for Materials.
    I have never heard of transaction BDCP2.  I also have never seen the problem you describe.
    I usually prefer not to use change pointers at all for Master data, such as Materials.  You can alter this behavior in CFC9, and instead use Business Transfer Events.  This means that all fields that are relevant for 'change transfer' to SCM will move across almost immediately after saving the changed material master.
    http://help.sap.com/saphelp_scm70/helpdata/EN/c8/cece3be9cd4432e10000000a11402f/frameset.htm
    Also read the links contained in this page.
    If you wish to actually perform a new 'initial load', then run the Integration model through program RIMODINI.  It may be a lengthy run.
    As always, check first in your Qual system before committing to production.
    Best Regards,
    DB49

  • HT1490 Why are Batteries no longer removable? This option allowed you to just plug in your laptop and save the life of the battery. It also gave the option to have more than one charged battery on hand for camping and back packing trips. Any suggestions?

    Also Mountain Lion doesn't have the timer for the the Battery life, only percentage. How can amount of battery time be shown permently?

    The removable battery problem is called progress or more accuratety alleged progress. It is cheaper to install a bare battery pack than to provide space for the cased removable variety. More compact and flatter laptop cases need the extra room that a removable battery occupied. It also weighs less with no case. Cooling can be a problem with higher performance options in these crowded environments.
    To me the ultra lightness and compactness of the new laptops is of secondary importance compared to performance and reliability. 

  • Aggrement with more than one invoice partner

    hi dudes,
    this is my problem:
    company has agreement with a vendor for service, but service provider is some one else (that has an agreement with our vendor). after service entry, our vendor asks us to pay money to the service provider and then himself. but in ME31K you can just assign one invoicing party.
    Is it possible to give for example 30% of agreement to suppler A and 70% to supplier B.
    thx in advance

    Your issue is to pay to vendor to whom you have placed the order and the vendor inturn has subleted your order.
    What you do is change the invoicing party in MIRO and pay accordingly to your vendor and next to the other vendor to whom he has subletted your work.

Maybe you are looking for