MOT is changing for PO in APO
Hi ,
Means of transport is changing for PO in APO .
For Standard PO : it is picking 0005 MOT.
For Consignment PO :it is picking 0003 MOT.
Every thing is same in inforecord and TL .
Please suggest.
Manish
Hi ,
Let me rephrase my question.
When i manually create Purchase orders in R/3 and CIF it to APO.
On PO is picking means of transport 003 (Consignment PO) and other (Standard PO) is picking means of transport 005 with same future delivery date .
I have 2 inforecord one for Consignment PO and other for standard PO.
Even if I create PR in APO and send it to APO with Source of supply Consignment and standard Info record it is behaving same when we convert PR to PO in R/3.But PR's MOT is same in APO before cifing to R/3.
We have already created TL in APO by cifing PIR from R/3.
I checked all the setting (like Planned delivery time etc) in Info record and contract and TL all are same.
Or if we go to basics please help me in understanding u201Cbasis of picking means of transport in APO and what is the link between R/3 means of transport and APO means of transport.
Manish
Similar Messages
-
BAPI to read and change schedule lines in APO
Hello experts,
We want to firm schedule lines inside the firm zone of the APO procurement scheduling agreements with a daily job. For this we are trying to use BAPI BAPI_POSRVAPS_GETLIST3 and BAPI_POSRVAPS_SAVEMULTI3. The getlist one does not return schedule lines, it returns purchase orders and purchase requisitions. Are these the right bapis to read and change schedule lines in APO? or is there anyother one we can use?
Thanks and regards,
ErgulHi,
You can use the below code to read the schedule lines.
Checking a session exists
CALL FUNCTION '/SAPAPO/RRP_SIMSESSION_GET'
IMPORTING
ev_simsession = gv_sims
es_gen_params = gv_params.
If not create a new session and read it
IF gv_sims IS INITIAL.
CALL FUNCTION '/SAPAPO/RRP_SIMSESSION_CREATE'
IMPORTING
ev_simsession = gv_sims.
CALL FUNCTION '/SAPAPO/RRP_SIMSESSION_GET'
IMPORTING
ev_simsession = gv_sims
es_gen_params = gv_params.
g_cre_chk = 'X'.
ENDIF.
CALL FUNCTION '/SAPAPO/CMDS_TPSRC_GET'
EXPORTING
iv_ebeln = p_l_t_acknh_ebeln
iv_ebelp = p_l_t_acknh_ebelp
TABLES
et_tpsrc_all = lt_tpsrc
EXCEPTIONS
matid_not_found = 1
locfrom_not_found = 2
locto_not_found = 3
scheduling_agreement_not_found = 4
error_selecting_schedagreement = 5
OTHERS = 6.
IF sy-subrc = 0.
reading the scheduling agreement records
READ TABLE lt_tpsrc INTO ls_tpsrc INDEX 1.
CALL FUNCTION '/SAPAPO/PWB_BZQID_GET_ORDER'
EXPORTING
iv_simid = '000'
iv_bzqid = ls_tpsrc-bzqid
IMPORTING
ev_ordid = lv_iordid
EXCEPTIONS
lc_connect_failed = 1
no_elements = 2
unit_conversion_failed = 3
OTHERS = 4.
IF sy-subrc = 0.
CALL FUNCTION '/SAPAPO/PWB_GET_RELATED_ORDERS'
EXPORTING
iv_ordid = lv_iordid
iv_order_type = '16'
iv_simid = '000'
IMPORTING
ev_ordid = lv_eordid
EXCEPTIONS
order_not_found = 1
lc_connect_failed = 2
no_elements = 3
OTHERS = 4.
IF sy-subrc = 0.
APPEND lv_eordid TO lt_ordid.
CALL FUNCTION '/SAPAPO/DM_PO_READ'
EXPORTING
iv_simsession = gv_sims
is_gen_params = gv_params
it_ordid = lt_ordid
IMPORTING
et_schedule = p_lt_sched
EXCEPTIONS
lc_connect_failed = 1
lc_com_error = 2
lc_appl_error = 3
OTHERS = 4.
ENDIF.
ENDIF.
ENDIF.
Use '/SAPAPO/CMDS_SNP_MM_ORD_MODIFY' function module to change the schedule lines (Pass '16' to iv_order_type parameter).
Let me know if u have any issues.
Regards,
Siva. -
How to find out changes in order in APO
Hi,
I have with me order number. I want to know what changes are done in APO in particular time period through which transactions.
I mean I want to see changes particular order in particular time period.
I tried with /SAPAPO/C3
But in 24 hours period there are thousands of log it is not possible search one by one.
By anyway can I filter logs pertaining to one production order.
Regards,
SantoshThanks both.
I was searching for changes in APO through ECC only.
Our problem is suddenly few production orders are loosing charcteristics(we are using CDP).
We are working with SAP for last one month, but no luck.
To findout reason we were copying active planning version twice a week and also monitoring for new production order with lost charcteristics.
While comparing versions we found that one receipt element ( we are using multi item order)is added in production order which may be reason for loss of charcteristic.
to our surprise there is no change in production order in ECC during this period.
I cannot think of APO changing firmed receipt element production order.
NO CCR was done for this order during this period.
As we know day and not exact time when this happened wanted to have logs based prodction order.
It seems it is not possible?
Is there anyway?
Regards,
Santosh -
How to change order data in APO
Hi,
I am keen to know on ways to change order data in APO say order category BI.....we want to change date by taking input from cif user exit APOCF006.We need this information for the ongoing project.
I know two options...1) using BAPIs 2) Not very sure about this option ...Function Module:/SAPAPO/OMORDER*CHANGE.
Could you please help to have better understanding on ways to change orders in APO?
Thank you
Best Regards
Nilesh PatilHello Rishi,
Thanks for your reply.
Demand node ofr purchase Ordre( BF) in SNP is Conrel( BI category). We want to change date( start date) at this demand node . We will get this date from R3 using say non cif method.
There are few ways to do it....
1) If we ignore Menas of Transport( so essentially transit time or lead time in tlane) in that purchase order and change this requirement date directly using purchase order save BAPI( requirement node) ......Question will system allow us to do so and even if it allows us to do so will it casue some problem( inconsistencies) later?
2) Second option I am thinking is...
For one product we maiantain GR processing time in product location master and this is considered while determining strat date of BI (Start date= Delivery date -GR procesisng time- means of Transport lead time - some other times ....). For this product let's say we have 100 Purchase Orders (BF). We have requirement that each of these POs should get separate treatment while calculating Start date. It means start date can be different for different POs and once we change it forcibly then it shoulkd not change unless we again change it forcibly.
We are thinking to change GR processing time at runtime wheneveer Purchase Order is changed. So if GR time in product location master is 1 day ....for different Purchase Orders different GR processing time can be considered. Say for Po1...its 2 day...for P2 its 4 day.
Or similar way we can change transit time as given in means of transport in tlanes.
Will appreciate your or anyone's comment
Thank you
Nilesh -
I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to forbid any further changes for PO (QTY and price ) after it has been
Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.Hi,
Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
But quantity can be changed at any time.
So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
Ramesh -
How to forbid any further changes for PO (QTY and price )?
Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.Better to post this in logistic forum.
THere will be some config option to do so but normal FI perosn would need to dig deep, a MM perosn should answer quickly.
Reg
Hein -
If i made any changes for one employee means it get reflect for others
Dear friends..
I am Abaper, i am in Support phase, i am facing one HR issue. kindly give me some idea to solve.
i have 2 employee number 2025 (VIJAYAN.M) and 2925 (VIJAYAN.M). in this both case employee name is same..
if i made any changes for employee 2025 infotype (for eg bank details) means, 2925 also get reflect the same changes vice versa..
Kindly give me some idea
Regards
DevaHi! Deva,
As you are ABAPer , and if you are doing it through some programing , then you must have getting same problem for all those employees who have similarity in their name or other,
so, please check or debug what criteria you have given for search ,for changing/updating bank key field,
check, it should be perner base not name base or any other.
Please check and revert so that we try to resolve.
Check one thing that is it only problem with bank key any other infotype also.
*Sneha. -
Fast change for statistical delivery date in me21n
hi
need fast change for statistical delivery date in me21n
in me21n when i enter on to fast change screen i doesn't find statistical delivery date
can anyone tell me the process
thanksDear Anudeep,
You cannot change this via "Fast Change".
Please see the usage of this field.
Calculation of the delivery time is an element in the determination of a vendor's adherence to delivery dates (that is, the vendor's delivery timeliness, or on-time delivery performance) in MM Vendor Evaluation.
If it becomes known that the vendor can only deliver ordered goods some days later than originally stipulated, for instance, you can change the delivery date accordingly for materials planning and control purposes. However, the statistics-relevant delivery
date remains unchanged.
As a result, the vendor's "on-time delivery performance" score worsens. At the same time, it is ensured that materials planning and control works on the basis of the right date.
Regards,
ian, Wong Loke Foong -
Ok so now I right the novel. Haha.
I bought my iPhone 5s and set up the AppleID for iCloud to be the same as the Apple ID I already used for iTunes and the App store. I was using @shaw.ca as part of the emaill address. I changed my ISP to save money so had to change the Apple ID. I had no issues changing it for iTunes and the App store, but it wouldn't change for iCloud. I don't recall the password and can't have it sent to me as that address does not work any longer.
What do I do to get my AppleID for iCloud working again?Yes, you understood correctly. From your explanation, you created your hotmail.ca ID by revising the shaw.ca ID. Given that, you should perform the steps listed in my original post:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then save any photo stream photos that you wish to keep to your camera roll (unless using iCloud Photo Library). When finished goThen go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device). -
I opened, say, 100 PNG files that were saved in a landscape format. So I selected all files, typed Cmd+L (to rotate left), and then viewed them for a while. After I was finished, I tried to close all of them at once, but found I had to click on "Revert Changes" for every file?
In Snow Leopard, an option would come up allowing you to discard changes for ALL open files. Here, I cannot seem to find that option (if it even exists). Does anyone have an idea?From the menu bar, select
▹ System Preferences... ▹ General ▹ Ask to keep changes when closing documents: Off -
How to find the when the password is changed for a system User
Hi to all,
We have a test database where our application connects to system user. The application runs more than a month without any issues, But suddenly my system and sys password gets changed. I wonder how this would happen. I have checked with DBA_USERS to check whether the account gets locked, But the account is in the Open state.
I need to find out when the password gets changed for these users and who changed it? Is there any possible to trace it or we need to enable the auditing to find it in future.
Kindly let me know the possible ways.
Regards,
Vijayaraghavan KVijayaraghavan Krishnan wrote:
Hi to all,
We have a test database where our application connects to system user. The application runs more than a month without any issues, But suddenly my system and sys password gets changed. I wonder how this would happen. I have checked with DBA_USERS to check whether the account gets locked, But the account is in the Open state.
I need to find out when the password gets changed for these users and who changed it? Is there any possible to trace it or we need to enable the auditing to find it in future.
Kindly let me know the possible ways.
Regards,
Vijayaraghavan KThe only way to implement an Oracle Audit -
What are the table names for CRM and APO?
hi friends,
what are the table names for CRM and APO?
Regards
suneel.hi Suneel,
check in crm forum
Re: SAP-CRM Tables
BUT051 BP Relationship: Contact Person Relationship
Similar to BUT050 , additionally contains Contact Persons Address data
BUT0BK Business Partner: Bank Data & Details
BP Number, Bank Key, Bank Country Key, Bank Account Number
BNKA Bank Master Data
BUT100 BP: Roles
ADR2 Telephone Numbers (Business Address Services)
ADR6 SMTP Numbers (Business Address Services)
Contains Email Id of the BP.
ADRC Addresses (Business Address Services)
BPs Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
TSAD3T Table containing the Title text against a Title No.
COMM_PRODUCT Master Table for Product
CRMM_BUAG Master table for Business Agreement
CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
Note:
1. It doesnt store the Business Partner
responsible for the transaction. To
get the Partner No, link it with
CRM_ORDER_INDEX.
2. This table can be used for search
based on the Object Id(Business
Transaction No).
CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
CRMC_PROC_TYPE Master table Business Transaction Type
CRMC_PARTNER_FCT Definition of Partner Functions
SCPRIOT Priorities for Activities with priority text.
CRMC_PROC_TYPE_T Text for a transaction type
CRMC_ACT_OBJ_T Objective Number and Text for Activities
TJ30T All the status code and text
CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
IBIB : Installed Base/Ibase
IBIN : Installed Base Components
COMM_PRODUCT : Products
CRMC_T077D : customer account groups
CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
CRMD_ORDERADM_H Business Transactions CRM
CRMD_ACTIVITY_H Activity
CRMD_OPPORT_H Opportunity
BUTOO : Customer details
BUT001 BP: General data II
BUT100 BP: Roles
BUT150 BP relationship: Attribute table (test
different
BUT_HIER_TREE Business Partner Group Hierarchy
CDBC_T_PRODUCTID Mapping: Product Id
CDBD_ORGMAN Business transaction - organizational unit -
set
COMC_PRODUCT General Product Settings
COMC_R3_FIELDS Assignment of R/3 material master fields to
CFOP
COMM_CATEGORY Category
COMM_CFGMAT Basic Data for Materials
COMM_HIERARCHY Category Hierarchy
COMP_TYPES Hierarchy Tool: Comparison Type Check
Table
CRMC_CPRICPROC Customer Pricing Procedures
SMOKVBEZ15 Assignment employees to positions
CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
SMOFSUBTAB : Mapping & Parameters
SMOFDSTAT : Download Monitor (R4AM1)
SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
SMOFOBJECT Definition of Objects for Download
SMOFOBJPAR Parent Objects of an Object in Table
SMOFPARSFA Middleware Parameter
SMOFQFIND Queue Finder Table for MW-Queue finder
SMOFTABLES Definition of Tables for Download -
Visa has changed for the purchase of Apple products, i did not know how I put the new MasterCard number to finish the process of buying products Thank you
i have ibad mini
and iphone4
laptop sony
can you sent for me the anserChanging Account Information > http://support.apple.com/kb/HT1918
-
it should be all the MacBook Pro mid 2010 with symptoms, there should get their logic board changed for free, mine mac is 3 month late and i had this problem for over a year, but i first saw this article today
Hey Clintonfrombirmingham
I called Apple technical support in Denmark, but with no positive reply.
She couldn't do anything, and said that They had sent a recall Email about the problem and with their offer to repair the Macbook Pro, but I'd never recieved an Email about the problem. She wasn't in power to make an exception. It can't be true that i paid a lot of money, for a product that can't barely stand on its own feets, Apple didn't tell me that the product I was about to buy, would restart every 5 minute. and now when they know the problem, they wont repair it? it just don't make sense for me. If a car seller discovers that all the brakes in a car he had sold, will crash after some years he will call all the cars back to repair no mater what. i just don't understand how Apple will make good service for their custumers, by extending the warranty from 2 to 3 years, but wont take the computers there is a little bit to old, 4 months will make the difference. i can't believe it.
What can i do now?
best regards Oskar
Maybe you are looking for
-
How could I Import RAW photos from sony A300 into Lightroom 1.4.1?
How could I Import RAW photos from sony A300 into Lightroom 1.4.1? RAW photos files in sony A300 are saved as "*.arw". any one can help?
-
How does AUMultibandCompressor work?
Can anyone point me in the direction of a tutorial for AUMultiband Compressor? I get the gain, attack and release settings, but not the fact that there appear to be four bands but only three crossovers. How does crossover work? What do the EQ setting
-
MSRV* Reports: How to add Vendor name?
howdy gurus! Appreciate very much for any guidelines on how to add vendor name in MSRV* reports. Cheers, Ron
-
Acrobat Reader 5 not compatible w/ W7
Informed that Acrobat Reader 5 is not compatible with a just-installed Windows 7.
-
Export data to anothe PDF form
Hello all, I have a research company that needs to keep track of all patients we see by entering their initials, date of visit, date of birth and some other simple data in a cumulative log (a PDF form). When the patient comes to our site we gather th