Mousewheel not working when over contents of custom panel.

So I have a custom collapisble panel, that when the user mousewheel's while over the header or footer of the panel it the entire page will scroll appropriately, but when the mouse is over the content inside the panel, the entire page won't scroll. I thought it might be the s:Scroller, but taking it out doesn't help. Anyone have the same issue? 
Here is the contents of my custom panel.
<s:VGroup width="100%">
            <s:Scroller width="100%" >
                <s:Group>
                    <s:layout>
                        <s:VerticalLayout horizontalAlign="justify"  />
                    </s:layout>
                    <custom:DG id="connectionsDG" width="100%"
                                                 excludeFrom="blah"
                                                 />
                    <custom:Something  id="multipleBlah"
                                                        includeIn="blah2"
                                                        />
                </s:Group>
            </s:Scroller>
            <s:Group width="300" bottom="5" top="5" left="5">
                <view:customAddButton id="AddButton"
                                      excludeFrom="blah" enabled="{enableAddBtn}"/>
            </s:Group>
</s:VGroup>

So the issue is setting MouseChildren = true on my custom Panel, by setting this the children are catching the mouseWheel event, I guess.  If I set mouseChildren=false then the mouseWheel works correctly, but then the buttons and scroller within my custom Panel don't work, of course.  Anyone have any work arounds?

Similar Messages

  • CLEAR BUTTON IS NOT WORKING WHEN PAGE HAS MUTIPLE SEARCH PANELS

    I created 2 regions on a page with the style Query both with a table.
    If I add information into the first tables' Edit Box and click clear, nothing happens, the information is not cleared. If I click Go, it will perform the query.
    If I add information into the second tables' Edit Box and click clear, the information will be cleared.
    Why doesn't the first clear button clear the information in the Edit Box?
    Is this a known issue?

    When using multiple query regions on same page, you will have to assign unique ids to the standard beans inside the region. Check the dev guide, "Search" section for a list of beans which require such setting.
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge

    I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge, I can share the content if I drag and drop from RMX, but if schedule the call in Resource manager or manually dial in from device the content is not going to other hand, I have tried to turn off encryption as well but still same issue. can you please help me out with this. I am from Lion co and purchased sx 10 recently.
    regards
    Hemang

    Can you please provide us with a little more information on your systems and configuration / topology, such as, what call control are you using (Cisco VCS, CUCM, other?). what type of "Bridge" are you using (is this a Cisco MCU, or Cisco TelePresence Server, or other device?), what versions of the software are on each of the devices, etc.  The more information we have about your environment will help us assist you better.  But saying that, if all your core equipment isn't Cisco, you may have more luck in the forums for the manufacturer of such equipment (ie Polycom's Support Community).
    Wayne
    Please remember to rate responses and to mark your question as answered if appropriate.

  • The Horizontal & vertical scroll is not visible or not working when i run the form in Forms 6i.

    Hi all,
    The Horizontal & vertical scroll is not visible or not working when i run the form.
    In this form , there are 5 canvas namely
    CANVAS2 - Stacked Canvas
    PASS - Content Canvas
    MAT_RATES - Content Canvas
    DATE - Content Canvas
    PREVIOUS - Content Canvas
    I have set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
    I have  set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
    But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
    Help me with this please. How do i make it visible??
    Oracle Forms 6i..
    Thank You.

    Vijetha wrote:
    Hi all,
    The Horizontal & vertical scroll is not visible or not working when i run the form.
    I have set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
    I have  set "Show Horizontal Scroll Bar" to "Yes" and  "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
    But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
    Help me with this please. How do i make it visible??
    Oracle Forms 6i..
    Thank You.
    hello vijetha,
    window and canvas show scroll bar when it need.
    You should show block property
    and set block scroll bar
    hope this helps..
    Hamid

  • Why Dynamic Parameter is not working, when i create report using stored procedure ?

    Post Author: Shashi Kant
    CA Forum: General
    Hi all
    Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
    Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
    is not shown to me when i referesh the report for viewing the results.
    I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
    ============================================================================================
    1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
    Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
    Dynamic Parameters in Action
    My question is that whether dynamic parameter is working with storedprocedure or not.
    When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
    One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
    Please reply soon , it's urgent
    Regards
    shashi kant

    Hi Kishore,
    I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
    expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
    =lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
    As to the second issue, please try to use the following expression:
    =Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
    Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl  file with all the size properties to us by the following E-mail address?  It is benefit for us to do further analysis.
    E-mail: [email protected]
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • SP2013: OK button not working when editing Settings on List app

    Hi, all!  Currently running Sharepoint 2013 under Server 2008 R2.  My client is Win7 Pro/64-bit running lastest Firefox, Chrome & IE11.  I am currently a Domain Admin for our corp domain.
    Long story short, I've created a test List app.  When I attempt to add a column to the layout of the custom list app, nothing happens when I click the OK button to save the app.  No access spinning, no errors on-screen (also none visible when I view
    the source of the SP page or header), no nothing.  The highlight of the button changes as expected, but nothing else.  The Cancel button will Cancel as expected, but OK does nothing whatsoever.
    My current permissions include member of Domain Admins, Site Owners (Full Control), and Visitors (Read).  A Check Permissions on myself yield the following:
    Full Control   | Given through the "~site~ Owners" group.  
    Read   | Given through the "~site~ Visitors" group.  
    Edit   | Given through the "~site~ Members" group.  
    (Note: "~site~" is replacing the actual SP2013 site name above)
    I'm thinking it has something to do with effective permissions.  I just added myself to the Owners group this morning with no effect.  I've also tried both Compatibility mode on and off in IE, and Firefox and Chrome don't work, either.  Suggestions
    are most welcome as I'm at the point where I'm not sure if IE11 is causing a problem or if it's actually an effective permissions problem that's preventing me from saving any column changes to the List app above.
    Thanks, guys!
    Steve

    Hi Steve,
    From your description, my understanding is that OK button does not work when you create a new column.
    Please check if you get any JS error after you click OK button by pressing F12 to OP developer tool.
    Besides, please try to create a new column with steps below:
    1.      
    Click LIST tab in the Ribbon.
    2.      
    Click Create Column in Mange Views section.
    3.      
    Create your column in the dialog.
    4.      
    Click OK button.
    In addition, please confirm these points below:
    1.      
    Test your issue in another list.
    2.      
    Test your issue with another computer.
    3.      
    Test your issue with another account.
    Best Regards,
    Vincent Han
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How do I set up a mail group on mac mail?  All the advise on line seems to refer to 'address book' and I only have 'contacts'.  The guidance does not work when using 'contacts' - can anyone help me?

    How do I set up a mail group on mac mail?  All the advise on line seems to refer to 'address book' and I only have 'contacts'.  The guidance does not work when using 'contacts' - can anyone help me?

    Create a group and send mail
    http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
    http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
    Best.

  • I just got the iPhone 5.  It's completely synced and working.  All my contacts are loaded.  However, caller ID is not working when I receive a call or a text.  Can anyone help me out with this?

    I just got the iPhone 5. It's completely synced and working.  All my contacts are loaded.  However, caller ID is not working when I receive a call or a text.  Can anyone help me out with this?

    Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs.  See if it is a fault in the hardware or just an iOS reinstall is the answer.
    One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings.  Then restore from the backup you just made.  That has helped some with WiFi problems, may be it would work with your problems.
    But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do.

  • Microphone of my iphone is not working when i call anyone nobody can listen but me, its working with headphone but its also working with videocam recording, please help me to solve this probelm.

    microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.

    Try this:
    1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
    2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
    3. If the issue persists, Your iPhone need repair.

  • Fault policy does not work when throwing remoteFault in bpel

    Hi
    I have a BPEL-proces in which I throw a remoteFault.
    In the fault-policy there is a condition for this fault
    <faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
    name="bpelx:remoteFault">
    <condition>
    <action ref="ora-java"/>
    </condition>
    </faultName>
    But the fault-policy does not work if I throw this remoteFault in de bpel. But when I invoke another service (which is shutdown), then I get a remoteFault and for this remoteFault the fault-policy works well.
    Any idea why the fault-policy does not work when I throw the remoteFault?
    Regards

    BPEL fault works only on invocation failures.
    Fault management will work based on the remote fault from the remote service, you cannot throw remote fault from bpel and capture that in fault management and process.
    The following are the actions that we can take on faults.
    1. Human Intervention
    2. Rethrow [rethrowFault]
    3. Termination [abort]
    4. Replay Fault [replayScope]
    5. Custom Java Action [javaAction]
    6. Retry [retry]
    Hope this helps !!!
    Thanks,
    Vijay

  • MouseWheel not working in latest Flash Player ?

    Hi,
    why is the mousewheel not working of the VScrollBar in the following example:
    http://wensauer.info/flex/Scrollbar/bin-release/Scrollbar.html
    FP 10.3.181.26 
    I tried it with
    Safari 5.1, Firefox5 OSX
    Windows7 Chrome, IE ...

    The adobe docs example is working well.
    But why is this not working :
    http://wensauer.info/flex/Scrollbar/Scrollbar.html (updated with viewport and viewsource enabled)
    [EDIT]
    looks like its not working when using a big step size :/

  • Programm not working when scheduled via SE16

    I created a job in SE16 for a custom ABAP programm exactaly the way we always do,
    for one programm te job is finished after 1 second, when this programm is startend manualy it runs like it is supposed to run.
    Does anybody have a clue what can be wrong??

    Hi Rechard,
    Have you used any function in that.. !!?? like GUI_DOWNLOAD will not work when you ll go for sheduler of that program..
    Make sure where the dump arises...
    -Maharshi

  • The T61 internal mic does not work when docked

    The internal mic does not work when docked. However works fine when undocked.
    Does anyone know how to fix this?

    I go this issue very recently. What I did to solve the problem was probably mentioned before somwehre over the web.
    First of all, I degraded Skype from the latest version to skype 6.1.0.129. Then I went in Skype - Tools - Option - Advanced Settings - Automatic Updates and click "Turn off automatic updates" and Save. I closed (Quit Skype) Skype then.  
    I clicked on Start (in toolbar) and in search area typed Device Meneger. Then in Sound Video and game controlers, highlite and right click on mouse on IDT High Definition Audio Codec and press Unistall. This will unistall IDT drivers from the system. You must restart your computer.
    Once you come back after reboot, you must go again to the Sound Video and game controlers and remove the rest part of your driver. After reboot go Sound Video and game controlers and click "Scan for hardware changes" then system find your IDT Sound Card again. Please install the latest driver (6.10.6367.0) and reboot. After reboot you should have mic working while on Skype. 

  • I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

    I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

    IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.

  • Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    what email service - Yahoo mail have been acting up lately
    you can try setting Mail as your email client - it resolves this pfoblem for some people
    LN

Maybe you are looking for