Move data from a pc to my mac

I have a VAIO laptop. I need to move some files onto my Mac. I have a cross over cable but it doesn't fit in a port on the laptop? The only ports I see are usb's and a printer port. There is an ethernet port. I have that plugged into my router. I also have the pc connected via ethernet to the router. I don't see the mac from the pc or the pc from the mac on the network. I guess that is to be expected. It is a new laptop.
There are 3 ports on the other side i don't understand. One is HDMI presumably a cable/tv connection. There is a little small one that says S400. There is a printer port or presumably scsi port? There is another one next to the ethernet port that might be a modem but I don't know. It is slightly smaller than the ethernet. Is that where the cross over cable goes? Why doesn't my cross over cable fit? Is it an old cross over cable? Are the newer ones smaller? Can I go to radio shack and get one that will fit.
tia,

Have you tried a USB hub this can give up to 7 extra USB terminals or a portable external Hard Drive like the Western Digital My Book

Similar Messages

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

Paragon even has non-destriuctive conversion utility if you do want to change drive.
Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
www.paragon-software.com
Some general Apple Help www.apple.com/support/
Also,
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Apple Mac App Store
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
How to Buy Mac OS X Mountain Lion/Lion
http://www.apple.com/osx/how-to-upgrade/
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X Community
https://discussions.apple.com/community/mac_os

I have an old Mac Tower. I need to move data from the unit to an external hard drive. What kind of hard drive do I purchase. There is not a lot of data to be transferred.

I have an old Mac Tower. I need to move data from the unit to an external hard drive. What kind of of hard drive must I purchase so that it works with the Tower? There is not a lot to transfer.

MG,
What we might need to do is to change the question. What computer do you plan to use the data on in the future? For example, if you have a newer tower, just move the hard drive to the new tower. If you want to use the data, what about an ethernet LAN to get the data over? If you want to archive the data, how do you store the second drive? What are your plans for the first drive? If the new software will not recognize the old file type, the data must be exported. Just getting files to another hard drive will not finish your journey.
As Allan said, knowing the exact model and year of your tower is important. My suggestion is to find a user group near you. Please post back with more information, including the name of a large city near you.
For example, our user group just experimented with a 1983 Apple IIc that predates the Mac. It started right up, read files from 1984 and saved them from a 5.25" floppy to a 3.5" floppy. That 3.5 floppy will go into a platinum G3 which will read PRODOS files using Apple File Exchange. That G3, with a USB card, will allow saving the files to a USB flash drive. But, somewhere along the way, some software has to read the file and convert it to data that is useable by current software.
Ji~m

I used the Migration Assistant to move data from my Time Machine to my new Mac.   Most data has been moved successfully but none of my iPhoto pictures have been moved.   Looking at my Time Machine now I find that the earliest back-up is dated after the Mi

I used the Migration Assistant to move data from my Time Machine to my new Mac.   Most data seems to have been transferred successfully but none of my iPhoto pictures have been transferred.
My Time Machine now shows the earliest available Back-up to be after the Migration Date.   My iPhoto pictures seem to have either been lost in the migration process or are locked in my Time Machine prior to the earliest back-up date now accessible.
Any advice on recovering my old iPhoto pictures would be greatly appreciated.

First go to iPhoto Preferences, look in both General and Advanced tabs to make sure that things are set to import from camera into iPhoto.
Then if that doesn't help, connect the camera and open Image Capture in your Applications > Utilities folder and see if you can use Image Capture to reset the import path from the camera to iPhoto.
Image Capture: Free import tool on Mac OS X - Macgasm
Message was edited by: den.thed
Sorry John, I didn't see your post when I clicked the reply button. Dennis

How do I move data from old hard drive to the time capsule?

Hi ,
I got the Time Capsule a couple days ago and have been backing up my Macbook pro's data. I have an old Lacie 160G external hard drive with data I'd like to put into the time capsule. The only way it can do that now seems like I have to transfer the data from the Lacie to my mac ...then backs it up automatically to the Time Capsule.
However, my 256G of space on my mac is about to be full !
The time machine automatically puts my Lacie hard drive as excluded from being backed up and the button - (to remove it) doesn't work when an external hard drive is connected to the Macbook. Right now, my trust in the time capsule is not superb. I've tried intentionally to delete a video file on my Macbook and then see if I could retrieve it . I've had one fail/error and one success. Since one failed I have not dared to delete anything.
So..the plan is to delete files on my Macbook and then import data from my Lacie to my Macbook...and pray the time capsule will save everything?
Can anyone with experience tell me how to use the time capsule correctly?
Thanks in advance!
Kai

The TM should be able to include the LaCie if it is formatted HFS+. If it isn't then no .. TM cannot backup.
On Yosemite the simple fact is TM is working poorly.. we are awaiting a patch or 6 to fix some of the issues.. but it is being extra flakey.
This is just a very personal opinion but I purchased Carbon Copy Cloner a couple of years ago.. very good purchase.. Easy to use.. reliable.. can backup network drives and disks that are not HFS+ formatted.. plus it can make a bootable clone.. It can backup separately your internal drive and your external drive to different sparsebundles on the TC.. I reckon for $40.. it is well worth it.
Otherwise you are stuck with the Yosemite / TM bugs.. good luck with those..
And more so the fact that TM is simply limited in its ability.
At least create a disk image on the TC and copy manually the files from the external drive into it. You do not need to copy the files to the Mac to do this..
But I think I would be buying another decent sized external drive.. 160GB drives.. sounds ancient..
How to use data and backups properly on a TC.
Q3 here. http://pondini.org/TM/Time_Capsule.html

Move data from one table to another table

Hi all,
I had a custom table called sales_data in that table there are columns like JAn,FEB,upto DEC including other columns so in each month there is some data total data is 23000 count but each month has has specific data like JAn-2500,FEB-2000 like that it has total 23000 records
My Requirement is i have to move data from one table to another table that too if i will pass jan only jan data should move like that feb,march,.....
in my table there is no month column i had get it from another table called gl_periods and by using cursor and case function i have written the code
well while when i am inserting data am passing year,month as parameters but 23000 data is moving it should get like that.
Please suggest me.its urgent
Thank You

Hi hamid,
               Please go through the below procedure.
CREATE OR REPLACE PROCEDURE APPS.copy_sales_to_forecast(p_fiscal_year varchar2,p_month number)
IS
CURSOR C1 IS select period_year,period_num,start_date,end_date from apps.gl_periods
             where period_set_name='Accounting'
             and   period_year=p_fiscal_year
             and   period_num<=p_month;
type type1 is table of xxc_forecast_data%rowtype;
t1 type1;
BEGIN
FOR CREC IN C1 LOOP
BEGIN
DELETE FROM xxc_forecast2
where fiscal_year = crec.period_year
and attribute1='Copied From Sales to Forecast Table of Month '||crec.period_num;
END;
SELECT
product_category           ,
product_sub_category       ,
product_line               ,
product_style              ,
item_number                ,
item_description           ,
customer_name              ,
customer_number            ,
sales_channel              ,
null      ,
CASE
    WHEN crec.period_num=1 THEN sales_amount_month1
    ELSE 0
END Transaction_quantity_period1,
CASE
    WHEN crec.period_num=1 THEN sales_cost_month1
    ELSE 0
END item_cogs_period1,
CASE
    WHEN crec.period_num=1 THEN sales_mtl_cost_month1
    ELSE 0
END item_material_cogs_period1 ,
CASE
    WHEN crec.period_num=1 THEN sales_mtl_ovhd_cost_month1
    ELSE 0
END item_mtl_ovhd_cogs_period1,
CASE
    WHEN crec.period_num=1 THEN sales_res_cost_month1
    ELSE 0
END item_resource_cogs_period1,
CASE
    WHEN crec.period_num=1 THEN sales_op_cost_month1
    ELSE 0
END item_op_cogs_period1,
CASE
    WHEN crec.period_num=1 THEN sales_ovhd_month1
    ELSE 0
END item_ovhd_cogs_period1,
CASE
    WHEN crec.period_num=1 THEN sales_units_month1
    ELSE 0
END extended_amount_us_period1,
CASE
    WHEN crec.period_num=2 THEN sales_amount_month2
    ELSE 0
END Transaction_quantity_period2,
CASE
    WHEN crec.period_num=2 THEN sales_mtl_cost_month2
    ELSE 0
END item_material_cogs_period2,
CASE
    WHEN crec.period_num=2 THEN sales_mtl_ovhd_cost_month2
    ELSE 0
END item_mtl_ovhd_cogs_period2,
CASE
    WHEN crec.period_num=2 THEN sales_res_cost_month2
    ELSE 0
END item_resource_cogs_period2,
CASE
    WHEN crec.period_num=2 THEN sales_op_cost_month2
    ELSE 0
END item_op_cogs_period2,
CASE
    WHEN crec.period_num=2 THEN sales_ovhd_month2
    ELSE 0
END item_ovhd_cogs_period2,
   CASE
    WHEN crec.period_num=2 THEN sales_units_month2
    ELSE 0
END extended_amount_us_period2,
CASE
    WHEN crec.period_num=3 THEN sales_amount_month3
    ELSE 0
END Transaction_quantity_period3,
CASE
    WHEN crec.period_num=3 THEN sales_mtl_cost_month3
    ELSE 0
END item_material_cogs_period3,
CASE
    WHEN crec.period_num=3 THEN sales_mtl_ovhd_cost_month3
    ELSE 0
END item_mtl_ovhd_cogs_period3,
CASE
    WHEN crec.period_num=3 THEN sales_res_cost_month3
    ELSE 0
END item_resource_cogs_period3,
CASE
    WHEN crec.period_num=3 THEN sales_op_cost_month3
    ELSE 0
END item_op_cogs_period3,
CASE
    WHEN crec.period_num=3 THEN sales_ovhd_month3
    ELSE 0
END item_ovhd_cogs_period3,
CASE
    WHEN crec.period_num=3 THEN sales_units_month3
    ELSE 0
END extended_amount_us_period3,
CASE
    WHEN crec.period_num=4 THEN sales_amount_month4
    ELSE 0
END Transaction_quantity_period4,
CASE
    WHEN crec.period_num=4 THEN sales_mtl_cost_month4
    ELSE 0
END item_material_cogs_period4,
CASE
    WHEN crec.period_num=4 THEN sales_mtl_ovhd_cost_month4
    ELSE 0
END item_mtl_ovhd_cogs_period4,
CASE
    WHEN crec.period_num=4 THEN sales_res_cost_month4
    ELSE 0
END item_resource_cogs_period4,
CASE
    WHEN crec.period_num=4 THEN sales_op_cost_month4
    ELSE 0
END item_op_cogs_period4,
CASE
    WHEN crec.period_num=4 THEN sales_ovhd_month4
    ELSE 0
END item_ovhd_cogs_period4,
CASE
    WHEN crec.period_num=4 THEN sales_units_month4
    ELSE 0
END extended_amount_us_period4,
CASE
    WHEN crec.period_num=5 THEN sales_amount_month5
    ELSE 0
END Transaction_quantity_period5,
CASE
    WHEN crec.period_num=5 THEN sales_mtl_cost_month5
    ELSE 0
END item_material_cogs_period5,
CASE
    WHEN crec.period_num=5 THEN sales_mtl_ovhd_cost_month5
    ELSE 0
END item_mtl_ovhd_cogs_period5,
CASE
    WHEN crec.period_num=5 THEN sales_res_cost_month5
    ELSE 0
END item_resource_cogs_period5,
CASE
    WHEN crec.period_num=5 THEN sales_op_cost_month5
    ELSE 0
END item_op_cogs_period5,
CASE
    WHEN crec.period_num=5 THEN sales_ovhd_month5
    ELSE 0
END item_ovhd_cogs_period5,
CASE
    WHEN crec.period_num=5 THEN sales_units_month5
    ELSE 0
END extended_amount_us_period5,
CASE
    WHEN crec.period_num=6 THEN sales_amount_month6
    ELSE 0
END Transaction_quantity_period6,
CASE
    WHEN crec.period_num=6 THEN sales_mtl_cost_month6
    ELSE 0
END item_material_cogs_period6,
CASE
    WHEN crec.period_num=6 THEN sales_mtl_ovhd_cost_month6
    ELSE 0
END item_mtl_ovhd_cogs_period6,
CASE
    WHEN crec.period_num=6 THEN sales_res_cost_month6
    ELSE 0
END item_resource_cogs_period6,
CASE
    WHEN crec.period_num=6 THEN sales_op_cost_month6
    ELSE 0
END item_op_cogs_period6,
CASE
    WHEN crec.period_num=6 THEN sales_ovhd_month6
    ELSE 0
END item_ovhd_cogs_period6,
   CASE
    WHEN crec.period_num=6 THEN sales_units_month6
    ELSE 0
END extended_amount_us_period6,
CASE
    WHEN crec.period_num=7 THEN sales_amount_month7
    ELSE 0
END Transaction_quantity_period7,
CASE
    WHEN crec.period_num=7 THEN sales_mtl_cost_month7
    ELSE 0
END item_material_cogs_period7,
CASE
    WHEN crec.period_num=7 THEN sales_mtl_ovhd_cost_month7
    ELSE 0
END item_mtl_ovhd_cogs_period7,
CASE
    WHEN crec.period_num=7 THEN sales_res_cost_month7
    ELSE 0
END item_resource_cogs_period7,
CASE
    WHEN crec.period_num=7 THEN sales_op_cost_month7
    ELSE 0
END item_op_cogs_period7,
CASE
    WHEN crec.period_num=7 THEN sales_ovhd_month7
    ELSE 0
END item_ovhd_cogs_period7,
CASE
    WHEN crec.period_num=7 THEN sales_units_month7
    ELSE 0
END extended_amount_us_period7,
CASE
    WHEN crec.period_num=8 THEN sales_amount_month8
    ELSE 0
END Transaction_quantity_period8,
CASE
    WHEN crec.period_num=8 THEN sales_mtl_cost_month8
    ELSE 0
END item_material_cogs_period8,
CASE
    WHEN crec.period_num=8 THEN sales_mtl_ovhd_cost_month8
    ELSE 0
END item_mtl_ovhd_cogs_period8,
CASE
    WHEN crec.period_num=8 THEN sales_res_cost_month8
    ELSE 0
END item_resource_cogs_period7,
CASE
    WHEN crec.period_num=8 THEN sales_op_cost_month8
    ELSE 0
END item_op_cogs_period8,
CASE
    WHEN crec.period_num=8 THEN sales_ovhd_month8
    ELSE 0
END item_ovhd_cogs_period8,
CASE
    WHEN crec.period_num=8 THEN sales_units_month8
    ELSE 0
END extended_amount_us_period8,
CASE
    WHEN crec.period_num=9 THEN sales_amount_month9
    ELSE 0
END Transaction_quantity_period9,
CASE
    WHEN crec.period_num=9 THEN sales_mtl_cost_month9
    ELSE 0
END item_material_cogs_period9,
CASE
    WHEN crec.period_num=9 THEN sales_mtl_ovhd_cost_month9
    ELSE 0
END item_mtl_ovhd_cogs_period9,
CASE
    WHEN crec.period_num=9 THEN sales_res_cost_month9
    ELSE 0
END item_resource_cogs_period7,
CASE
    WHEN crec.period_num=9 THEN sales_op_cost_month9
    ELSE 0
END item_op_cogs_period9,
CASE
    WHEN crec.period_num=9 THEN sales_ovhd_month9
    ELSE 0
END item_ovhd_cogs_period9,
   CASE
    WHEN crec.period_num=9 THEN sales_units_month9
    ELSE 0
END extended_amount_us_period9,
CASE
    WHEN crec.period_num=10 THEN sales_amount_month10
    ELSE 0
END Transaction_quantity_period10,
CASE
    WHEN crec.period_num=10 THEN sales_mtl_cost_month10
    ELSE 0
END item_material_cogs_period10,
CASE
    WHEN crec.period_num=10 THEN sales_mtl_ovhd_cost_month10
    ELSE 0
END item_mtl_ovhd_cogs_period10,
CASE
    WHEN crec.period_num=10 THEN sales_res_cost_month10
    ELSE 0
END item_resource_cogs_period10,
CASE
    WHEN crec.period_num=10 THEN sales_op_cost_month10
    ELSE 0
END item_op_cogs_period10,
CASE
    WHEN crec.period_num=10 THEN sales_ovhd_month10
    ELSE 0
END item_ovhd_cogs_period10,
CASE
    WHEN crec.period_num=10 THEN sales_units_month10
    ELSE 0
END extended_amount_us_period10,
CASE
    WHEN crec.period_num=11 THEN sales_amount_month11
    ELSE 0
END Transaction_quantity_period11,
CASE
    WHEN crec.period_num=11 THEN sales_mtl_cost_month11
    ELSE 0
END item_material_cogs_period11,
CASE
    WHEN crec.period_num=11 THEN sales_mtl_ovhd_cost_month11
    ELSE 0
END item_mtl_ovhd_cogs_period11,
CASE
    WHEN crec.period_num=11 THEN sales_res_cost_month11
    ELSE 0
END item_resource_cogs_period11,
CASE
    WHEN crec.period_num=11 THEN sales_op_cost_month11
    ELSE 0
END item_op_cogs_period11,
CASE
    WHEN crec.period_num=11 THEN sales_ovhd_month11
    ELSE 0
END item_ovhd_cogs_period11,
CASE
    WHEN crec.period_num=11 THEN sales_units_month11
    ELSE 0
END extended_amount_us_period11,
CASE
    WHEN crec.period_num=12 THEN sales_amount_month12
    ELSE 0
END Transaction_quantity_period12,
CASE
    WHEN crec.period_num=12 THEN sales_mtl_cost_month12
    ELSE 0
END item_material_cogs_period12,
CASE
    WHEN crec.period_num=12 THEN sales_mtl_ovhd_cost_month12
    ELSE 0
END item_mtl_ovhd_cogs_period12,
CASE
    WHEN crec.period_num=12 THEN sales_res_cost_month12
    ELSE 0
END item_resource_cogs_period12,
CASE
    WHEN crec.period_num=12 THEN sales_op_cost_month12
    ELSE 0
END item_op_cogs_period12,
CASE
    WHEN crec.period_num=12 THEN sales_ovhd_month12
    ELSE 0
END item_ovhd_cogs_period12,
    CASE
    WHEN crec.period_num=12 THEN sales_units_month12
    ELSE 0
END extended_amount_us_period12,
CASE
    WHEN crec.period_num=2 THEN sales_cost_month2
    ELSE 0
END item_cogs_period2,
   CASE
    WHEN crec.period_num=3 THEN sales_cost_month3
    ELSE 0
END item_cogs_period3,
   CASE
    WHEN crec.period_num=4 THEN sales_cost_month4
    ELSE 0
END item_cogs_period4,
   CASE
    WHEN crec.period_num=5 THEN sales_cost_month5
    ELSE 0
END item_cogs_period5,
CASE
    WHEN crec.period_num=6 THEN sales_cost_month6
    ELSE 0
END item_cogs_period6,
CASE
    WHEN crec.period_num=7 THEN sales_cost_month7
    ELSE 0
END item_cogs_period7,
   CASE
    WHEN crec.period_num=8 THEN sales_cost_month8
    ELSE 0
END item_cogs_period8,
CASE
    WHEN crec.period_num=9 THEN sales_cost_month9
    ELSE 0
END item_cogs_period9,
   CASE
    WHEN crec.period_num=10 THEN sales_cost_month10
    ELSE 0
END item_cogs_period10,
   CASE
    WHEN crec.period_num=11 THEN sales_cost_month11
    ELSE 0
END item_cogs_period11,
CASE
    WHEN crec.period_num=12 THEN sales_cost_month12
    ELSE 0
END item_cogs_period12,
a.fiscal_year   ,
a.budget_entity ,
a.organization_code,
a.customer_id ,
a.inventory_item_id ,
NULL,
NULL,
a.created_by ,
a.last_updated_by ,
a.creation_date ,
a.last_update_date ,
'Copied From Sales to Forecast Table of Month '||crec.period_num,
a.attribute2,
a.attribute3 ,
a.attribute4 ,
a.attribute5 ,
a.attribute6 ,
a.attribute7 ,
a.attribute8 ,
a.attribute9 ,
a.attribute10,
a.attribute11,
a.attribute12,
a.attribute13,
a.attribute14,
a.attribute15
bulk collect into t1
FROM xxc_sales_data a
where a.fiscal_year          = crec.period_year
having CASE
             WHEN crec.period_num=1 THEN sum(sales_amount_month1)
             WHEN crec.period_num=2 THEN sum(sales_amount_month2)
             WHEN crec.period_num=3 THEN sum(sales_amount_month3)
             WHEN crec.period_num=4 THEN sum(sales_amount_month4)
             WHEN crec.period_num=5 THEN sum(sales_amount_month5)
             WHEN crec.period_num=6 THEN sum(sales_amount_month6)
             WHEN crec.period_num=7 THEN sum(sales_amount_month7)
             WHEN crec.period_num=8 THEN sum(sales_amount_month8)
             WHEN crec.period_num=9 THEN sum(sales_amount_month9)
             WHEN crec.period_num=10 THEN sum(sales_amount_month10)
             WHEN crec.period_num=11 THEN sum(sales_amount_month11)
             WHEN crec.period_num=12 THEN sum(sales_amount_month12)
            END !=0;
FORALL i IN t1.first .. t1.last
INSERT INTO xxc_forecast2 VALUES t1(i);
--commit;
END LOOP;
END;
Thank You

Move data from one table to another

Hi,
I need to move data from work space -1 to work space -2. I need to move only selected data. From work space -1 to work space -2
Work space -1
Table -1_
ID NAME Description
1 xyz one
2 abc two
3 mnk three
Table -2_
ID PID NAME Description
1 1 x1 -
2 1 x2 -
3 2 a1 -
4 2 a2 -
5 3 m1 -
Table -1 is parent table and Table-2 is child. Here PID is parent key of table-1 and ID's in both the table are primary keys.
Now i need to move data from work space-1 to work space -2
Work Space -2 table structure
Table - 1
ID INDUSTRY_TYPE DATE DESC
1 TNT - -
2 MTN - -
Table - 2
ID T_ID NAME DATE DESC
1 1 T1 - -
1 1 T2 - -
2 2 E1 - -
2 2 E3 - -
I need to migrate data from work space -1 of table 1 and 2 to work space - 2 of table 1 and tabe 2
Please suggest me a query to migrate. Please let me know if the steps mentioned above is not clear.
Thanks
Sudhir

Hi Sudhir,
since data tables are not located in work-areas but in schema's I presume you mean the latter.
A simple conversion statement would be something like :
insert into table s1.newtable ( column1, column2, ... )
select column1a, column2a, ...
from s2.oldtable
where ...
First the master table, then the child table.
This works using a user-id having al least read-access to schema s2. If no such user exists then use some export method.
No relation to APEX though.
Hope this helps.
Daniel

How to move data from a staging table to three entity tables #2

Environment: SQL Server 2008 R2
I have a few questions:
How would I prevent duplicate records, when/ IF SSIS is executed many times?
How would I know that all huge volume of data being loaded in the entity tables?
In reference to "how to move data from a staging table to three entity tables ", since I am loading large volume of data, while using lookup transformation:
which of the merge components is best suited.
How to configure merge component correctly. (screen shot is preferred)
Please refer to the following link
http://social.msdn.microsoft.com/Forums/en-US/5f2128c8-3ddd-4455-9076-05fa1902a62a/how-to-move-data-from-a-staging-table-to-three-entity-tables?forum=sqlintegrationservices

You can use RowCount transformation in the path where you want to capture record details. Then inside rowcount transformation pass a integer variable to get count value inside
the event handler can be configured as below
Inside Execute SQL task add INSERT statement to add rowcount to your audit table
Can you also show me how to Check against destination table using key columns inside a lookup task and insert only non
matched records (No Match output)
This is explained clearly in below link which Arthur posted
http://www.sqlis.com/sqlis/post/Get-all-from-Table-A-that-isnt-in-Table-B.aspx
For large data I would prefer doing this in T-SQL. So what you could do is dump data to staging table and then apply
T-SQL MERGE between tables (or even a combination of INSERT/UPDATE statements)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Move data from one fs to another from a particular position.

Hi all,
i have a requirement where i want to move data from one field symbol to another from a particular
position.
I have a work area which contains string values. i have converted this string to hexadecimal value .
in this hex string m lukin for a position where '0A' occurs. Now i have to pick the string till dis '0A' value and move it to some other field symbol. Can anybody tell me how to do that.
The code i have written is as follows:
FIELD-SYMBOLS: <fs> TYPE x.
             data: temp1 type string,
                   p_word type string,
                   temp2 TYPE string,
                   w_len TYPE i.
                   temp1 = wa_value-value. "this wa containd the value
                   w_len = strlen( temp1 ).
         if temp1 cp '"*'.
           ASSIGN wa_value-value TO <fs> CASTING TYPE x. " converting wa to hex value
              DATA: VAR TYPE i,
                    COUNTER TYPE i,
                    line_feed_count type i,
                    temp_count type i.
         VAR = strlen( wa_value-value ).
         CLEAR: COUNTER, temp_count, line_feed_count.
           WHILE COUNTER LE VAR.
            IF <fs>+counter(1) = '0A'.
            line_feed_count = line_feed_count + 1.
            COUNTer = COUNTer + 1.
            ENDIF.
            COUNTER = COUNTER + 1.
           ENDWHILE.
        endif.
Now , i want to pick data from starting till the position it gets '0A' and then again till it finds another '0A'.
Thanks in advance.

Hi,
As everyone has rightly pointed out, there is no direct way of transferring the data from one appset to another. However, there are definitely few ways of doing it:
1. Run export package. Export the data in flat file. Import the data using import DM package.
2. Export the data from the cube of your application in excel file. Then run the import DM package to load the data.
3. Run UJBR transaction in SAP. Take the backup of the transactional data. You will get few flat files. Run the import DM package.
All the above steps will work only if the structure of the applications in both the appsets is the same. Otherwise, you will have to modify the flat file before uploading the file.
Hope this helps.

How to move data from 2 internal table to 1 internal table

Can any body send me code that how to move data from 2 internal table into one internal table.
Moderator message : Read ABAP documentation. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 11:45 AM

Hi Mohdarif92;
I don't know your full needs. But general method should be as below code.
Please check exam below code.
Best regards.
data : begin of gt_result.
            ... like mkpf-...
            ... like mkpf-...
            ... like mseg-...
            ... like mseg-...
          end of gt_result
select *
into table gt_mkpf
from mkpf where ...
select *
into table mseg
from mseg where ...
loop at gt_mkpf.
     loop at gt_mseg where ... = mkpf-...
        move-corresponding gt_mkpf to gt_result.
        move-corresponding gt_mseg to gt_result.
        append gt_result
     endloop.
endloop.

Move data from external hard drive to time capsule

I want to move data from my external USB hard drive to time capsule.
If I drag and drop, it seems go through my computer, and it's 500 gig of data, that impossible, is there a way to direct copy?
Thanks in advance

maxxxx wrote:
If I drag and drop, it seems go through my computer
Yup.
is there a way to direct copy?
Nope.

2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

How did you copy files to the external drive, and what files did you copy? Did you drag and drop in the Finder? Use a clone utility? What files did not successfully copy?
If you reformatted the drive as part of your install, then you won't be able to recover any files from the drive. Reverting back to (reinstalling) 10.4 will not help you.
Do you have a complete-drive backup of your old system?
Matt

Move data from one Application to another Application.

Hi All,
I have a requirement to move data from one Application to another Application(we are working on SAP BPC 5.1/7.1 MS version).
Can anybody please mention all the possible ways to achieve it.
Thanks in advance.
Regards
Vani

Hi,
The best way to do this would be to use destination_app statement. Please refer to the below link from help.sap:
http://help.sap.com/saphelp_bpc75/helpdata/en/79/b299446e02478fa5eca684d1297ef3/content.htm
Alternatively, you can definitely export the data from one application and import it to the second.
Hope this helps.

Move data from one member to another existing member

Can someone please advise how I can move data from one member to another existing member? For example, I have data in member ID MT_160 and I want to move this data over to an existing member MT_130 as per business requirement. How can I accomplish this? I tried using the NEWID field but system complained that the new ID must be Unique, which makes sense. I'm stuck now. Any Ideas? I'm using BPC version 5.0 on Microsoft.
Thanks.

David,
one of the ways you can achieve the desired result is Via BPC Excel
1) from menu Edata--> RUn Package --> copy/Move . OR
2) You an write Script logic to Copy/Move data.
Hope this helps..

How long does it take to transfer data from a PC to a Mac?

Using Migration Assistant and I am transferring data from PC to IMac. Have no idea how ling this process should take. How long does it take to transfer data from a PC to a Mac?

This may not be the best forum to get an answer.
Depending on what is being/can be migrated it may be dependent on how much data is on the PC already.
AC

Move data from a pc to my mac

Similar Messages

Maybe you are looking for