Move Internet facing site and remove Exchange site

Background:
I am running Exchange 2010 in native mode
I have multiple AD sites connected via WAN
I have two sites each with an Exchange CAS, HT, Mailbox server and internet connections
I have one Edge server in the DMZ at the internet facing site A
All mail currently flows in/out through site A via connectors
OWA is currently hosted on the CAS/HT server at site A
I have installed a new Edge server in the DMZ of site B and cloned the configuration.
I am planning the move of the internet facing site to the new site where the other Exchange CAS/HT server resides.
Once the mail flow is occurring correctly in/out site B, I need to move all mailboxes to site B and shut down the Exchange server at site A.
Questions:
When I create the Edge Subscription at the new site, it offers to create a new send connector. The CAS/HT server at site B already has a send connector to site A. Will the new send connector cause mail flow problems if it is pointing to
the new Edge server that is not yet updated on public DNS? I am trying to do this in stages and I am not ready to change mail flow to site B internet.
What needs to happen to move OWA to the Exchange server at site B?
Once site B is handling OWA, all mail flow, and all mailboxes have been moved to that site, can I simply shut down the site A Exchange server?
Thanks for any input on how best to plan this move. If there is any documentation for this specific scenario, I work well from instructions but have not seen anything on the internet.

1. Sending can happen from both sites, regardless of where your MX records point. In fact, you don't need an MX record to send email - just to receive. So the new send connector in Site B won't cause issues with mail flow - messages will
go out B and come in A until you rehome your MX record.
2. In order to move OWA to Site B, your external records for your OWA site need to point to the external IP address that will connect to the Site B CAS (and hopefully, you have it behind a firewall of some sort).
3. Not quite - you need to move your OAB generation to the new site, and make sure that all CAS virtual directories in the new site are configured to handle the connections that currently go to Site A. See the following for what you need to do
to decommission your Site A Exchange servers - but where it says "Exchange 2013", think "Site A Exchange servers":
http://technet.microsoft.com/en-us/library/ee332361(v=exchg.141).aspx

Similar Messages

I would like to buy a Macbook Pro on the site and remove in a store, but I'm from Brazil

I would like to buy a Macbook Pro on the site and remove in a store, but I'm from Brazil and I will be in Miami next month only. I can already make the purchase and conduct the removal as soon as you arrive? How long the product is in the store? Is there any email I can contact Appe to clarify this doubt?

in the case of refurbished I can only buy online and mac is sent to the store once confirmed s purchase. in my case going to the U.S. early next month and would like to assure you buy, how long the product will be in the shop so I can pickup?

I just updated to Firefox 4 and my Roboform toolbar disappeared. Following the instructions on your site and Roboform's site did not help. It doesn't appear in the Customize Toolbar window nor in the Extensions list. How can I get it back?

I followed the instructions on your site and Roboform's site, but Roboform doesn't appear in the Customize Toolbar window nor does it appear in the Extensions list. How can I get the Roboform Toolbar back?

Here's an interesting bit: iTunes will let me restore my iPod touch from backup: it's still running iOS 4.3.3. I figured as much... there's backups showing in the Preferences -> Devices list for both devices (and even my old, long gone iPod touch 2G), but my iPhone (on iOS5) isn't giving me any such option. I remember I had to downgrade before to get the backup restored (something went haywire in the setup assistant, and I couldn't restore a backup from iTunes there)... If it was possible to go to iOS 5.0 rather than 5.0.1 I would just do the same thing again, but iOS 5.0.1 isn't an option. I attached a screenshot. Hopefully Apple can get this nonsense sorted out; I think iOS 5 might be the root of this, somehow.

When using google I am transferred to other web search sites and not the sites I am clicking on.

While using Google I am being connected to other search sites and not the sites I am clicking to go to.
== URL of affected sites ==
http://

It has nothing to do with Firefox -- it sounds like the sites you're trying to go to are already taken down. If that's the case, try clicking the Google's results' "Cached" button, or just try the other results Google gave you.

I pad keeps going to USA sites and not UK sites how do I fix this

I pad keeps going to USA sites and not UK sites how do I fix this

Mcdeezer,
It was my pleasure. It's always nice to share info with the good folks of the UK.

MP in DMZ for Internet facing clients and MAC systems

I am planning to install an MP, DP and SUP in our DMZ to be able to manage following
- Internet facing clients
- In house MAC system
- All Mobile device
I was wondering what ports I would be needing to open in DMZ so communication in/out DMZ to corporate is not compromised?
Also, would single box be able to handle all of the above role or I would need additional Primary site insdie the DMZ considering DMZ is residing in different forest?
I understand PKI is necessary to accomplish this so I am looking into it as well.
Anyone done this before and had any issues so please share so I can take advantage of your experience.
Thank you for your respond.

You need to put a single box in the DMZ that has the enrollment point, SUP, MP, DP roles on it. Remember that internet facing site box doesn't have to be domain joined.
for ports you need to be able to push SQL, 445, 135, 8530 (WSUS), ports into the DMZ. If the DMZ isn't able to have the ability to push into the perimeter network then you need to click the box that says "site server initated" this will make the primary
on the inside reach into the DMZ ever hour and pull out status messages and other data left that can't come back into the company.
Port listing
http://technet.microsoft.com/en-us/library/hh427328.aspx
Internet based is pretty much the same as it was in 2007 so you can use the docs for further information like scenerios:
http://technet.microsoft.com/en-us/library/bb693824.aspx
you will need to have the ability to export the cert and move it to the DMZ or you close the walls on the outside, make the make on the inside of the network, get the certs then bring up the firewall that forces it into the DMZ.
It is a bit more complicated than that but it is not easy to outline this proceedure in a single post.
http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com

Auto loading of username and password are taking place on one site and only one site and I do not want this to happen but can"t get it to stop.

As my question states I don't want auto loading on any site and it only happens on this one site. I have went thru tools and options and there are no sites listed for auto loading. There are no saved passwords. If I go to the site using Internet explorer the problem does not occur.

Ok, no problem i found this help articles:
https://support.mozilla.org/en-US/kb/how-clear-firefox-cache
http://www.youtube.com/watch?v=OukBlXfOP8Y

Demoting and Removing Exchange 2007 Server

Oh, I mistakenly saw 2003, and I thought you were removing Exchange 2003. My bad.
Run the uninstaller on the old system. It will take care of the rest. It will probably error out and give you reasons, clean up the reasons and run the uninstaller again. Once it's uninstalled properly, then you can power off the server and everything should be good. Don't forget your send connectors. I forgot that in my travels once.

At one of our locations we recently migrated all exchange mailboxes to a new Exchange 2007 on new OS platform, moving away from Server 2003. Everything to my knowledge has been migrated, users should be all connecting to new server, all connector headends have been updated, etc. As a test, I shutdown the old Exchange server (without uninstalling) but we ran into issues that day with Outlook constantly (every 5-10 minutes) asking for the user's password, slow loading of folder data, etc.; reboots/application restarts did not resolve. We turned the old Exchange server back on and all is now well. My theory is this is due to the schema still containing info about the old Exchange server. If I uninstall Exchange completely, thus removing it form schema, could I expect to have this issue resolved? Obviously I only get one chance on this, so...
This topic first appeared in the Spiceworks Community

I am trying to make a second website in iweb, I click 'new site' and select the site style, but it keeps opening my existing website. Any ideas?

I am trying to make a second website in iWeb. I have clicked 'new site' and then selected a style for the website, but then my existing website opens instead of a new one. Any ideas how to fix this?

Do you not get a new site folder at the left under your existing site?
OT

I downloaded Office for Mac 2011, and almost immediately my Yahoo email stopped working, most images were disabled throughout my internet sites, and my bank site reported that I was using a "new computer," which is not true. How can I get my email to work

I have an iMac version 10.6.8/2.66 GHz Intel Processor and 4 GB memory, with Safari 5.1.10. I had used Office for Mac 2008 but had to upgrade for work. The download (from Amazon) went swiftly, but when I started Word, it did not function too well. Then about an hour later I noticed that my Yahoo email site stopped working, it lost all images and the text just jumbled up on the left side of the screen. No amount of emptying caches or resets/quits/restarts did anything. I called the Internet support, and they just said it was my iMac that had the problem. I have been reduced to using MacMail as my email, but this is tenuous, as my Yahoo account keeps holding things up and constantly asking me for my password (and sometimes it does not accept it). How can I get my computer back?

The path may be long and tedious, grasshopper.
Actually, the download of Office 2011 for Mac probably was not legal and may have contained bugs or other things meant to make it unstable, or invite a host of issues. The usual path would be Office 2011 for Mac on DVD so you could reinstall it and add the extras from the disc as needed; or fix the installation later on. The updates for security were downloads from Microsoft servers. You'd need a legitmate version with pass code.
Options for Mac and office-like application suites include Libre Office, NeoOffice, and these run free. The latter supports up to Mavericks. 10.9.1 now. They have a word, excel, and other parts a lot like the real office.
If you have a working clone of the system prior to installing the Office 2011 for Mac download and any subsequent and perhaps unseen extras, you could revert to it simply by restarting the computer from the clone, where it resides in externally enclosed self-powered hard disk drive, of a type known to support OS X clones... With ports to help work with most modern Macs. FireWire + USB. Then, clone it back w/ carbon copy cloner.
Short of that, perhaps someone will see your post and offer some indepth method of hunting down bugs via use of Console logs; and maybe booting into Terminal utility to use unix code. It can be rather involved. Maybe Linc Davis will offer some detailed reply that will invite you to read carefully and try it.
I've given up using computers long ago.
A pet raven has been taught to write this.
Good luck & happy computing!

Allow/Block dialog comes up even when sites are in Trusted Sites and/or Intranet sites.

I have an issue where a user is prompted with an "Allow or Block" dialog everytime she clicks a link within a company created PDF. The links all go to intranet sites, which are defined in the intranet section, and even placed in tnhe Trusted Sites as well. How can I stop this dialog from popping up each time?
Software versions in play are:
Acrobat X
Windows 7
IE 9
TIA for any assistance.

Please be more specific.
How are the servers defined in the Trust Manager and the OS Internet Options Control Panel?
http://mycompanyserver.mycompanyname.com
But does the link in the PDF file look something like this:
http://mycompanyserver/pathtothePDFfile/thePDFfile.pdf
If so, then Acrobat and Windows are probably not seeing it as the same server. The FQDN (Fully Qualified Domain Name) is not defined as the same server.
The same would be said for a server that had "https://" in front of the URL. It's not considered the same server because it exists on a different port number. Usually 443 for https.

Redirecting between a desktop-browser site and a mobile site

My company is inheriting a site built by another party in CQ5. This site is intended to be viewed on a desktop browser. We are tasked with building a mobile site for it. Our creative department would like the user's browser to be detected, and if the user requests a page on the desktop site from a mobile browser, they would be redirected to the mobile site. Is there any way to do this on the server side without disabling caching on the site?

true
nevertheless, you need it in places for uncached requests. additionally you have the options of:
- javascript redirect (allows you to build an "opt-out" for the user, i.e. the user wants to stay on desktop regardless of mobile device, via cookie)
<script language=javascript>

</script>
- apache configuration redirect
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteCond %{HTTP_USER_AGENT} ^.*(mobile).*$ [NC]
RewriteRule ^$ http://m.example.com/ [L,R=302]
</IfModule>
dom.

SCCM 2012 Replication between Central Admin Site and all Primary Sites is failing

Let me start by saying I have made a mistake and now I am paying for it and attempting to fix it. All of our SCCM servers are virtual and exist on an ESX environment. The mistake I made is I restored our Central Admin Site from a backup without also
restoring the two Primary Sites at the same time. Now the databases between the sites simply refuse to synchronize. I can run the Replication Link Analyzer until I'm blue in the face and even though the data gets replicated once, the replication immediately
breaks and fails after that.
Regrettably I no longer have access to backups that would take me back to a point where the three servers were happy. The problem there is our ESX administrator only keeps a limited number of backups per server (we have in excess of 180 virtual servers in
our ESX environment) and the backups from a point in time where they worked is no longer available.
As I have said I have tried running the Replication Link Analyzer many times. I have also tried going into the SQL server console and running the stored procedure spDrsSendReplicationInvalid.
Can anyone provide me with any assistance on how best to restore replication between the Central Admin server and the two Primary servers?

http://blogs.msdn.com/b/scstr/archive/2012/05/31/how_2d00_to_2d00_site_2d00_server_2d00_recovery_2d00_central_2d00_or_2d00_primary.aspx
Just an addition: the option called "Recover central administration site:
Then specify the FQDN of a
Reference primary site" is the one to try first.
Torsten Meringer | http://www.mssccmfaq.de

Parallax scrolling problem since updating to Muse 7.1 and republishing my site

Hi.
I recently updated my Muse application to Version 7.1, made a few text changes to my site and republished my site, since I did this the following happens:
The parallax scrolling feature i have on my template moves the background images slowly to the right as you scroll for top to bottom.
I don't want it to do this, is this a bug in the 7.1 build of Muse of is there something I can do to stop this happening?
Also, the first background image you see when you land on the site seems to have repositioned itself within the frame to a different part of the image when published, see here the actual Muse document page, which is how it should look:
To see how it now looks 'live' see the link below...
www.jumatwo.com
any help resolving this would be much appeciated.
Thank You.

We had this where I work on ~200 machines.
We are still going around manually clicking the sharing>remote management tickboxes off and on as this fixes it.
It seems the GUI is not reflecting what is behind the scenes.

Certview, Pearson VUE and Sylvan Prometric Site and ID

Hi,
I got OCP certification in the past in Oracle8, Oracle9i and Oracle10g with Sylvan Prometric. One month ago I registered at certview Oracle site and Pearson VUE site, believing finding my history exams and certification Status. But it has not been so.
Then, i decided to log a SR, SR Number=23552675 asking for help and information about my issue, but till now i did not receive any answer.
I do not know why my OCP data are not present on certview site.
In the next future, i would like also take the Oracle11g upgrade exam and i do not know which ID i will have to use, Sylvan ID, Pearson VUE ID???
Any usefull help is appreciated.
Thanks and Regards
Simone Martucci

elianto72 wrote:
Hi,
I got OCP certification in the past in Oracle8, Oracle9i and Oracle10g with Sylvan Prometric. One month ago I registered at certview Oracle site and Pearson VUE site, believing finding my history exams and certification Status. But it has not been so.
Then, i decided to log a SR, SR Number=23552675 asking for help and information about my issue, but till now i did not receive any answer.
I do not know why my OCP data are not present on certview site.
In the next future, i would like also take the Oracle11g upgrade exam and i do not know which ID i will have to use, Sylvan ID, Pearson VUE ID???
Any usefull help is appreciated.
Thanks and Regards
Simone MartucciYou need to take all exams under the same Oracle Testing Id, otherwise it is as if you tokk the exams under different people.
Ideally this would have been sortd when you registered at Peason.
http://www.pearsonvue.com/Oracle/idmerge/

Move Internet facing site and remove Exchange site

Similar Messages

Maybe you are looking for