Move structure begins wt nonchar to Char - Unicode - incompatibility err

HI ,
we are trying to move one structure to variable
target is pure character and source is non character.. it contains amount values type P.
when i try using function module HR_99S_COPY_STRUC1_STRUC2 OR
Class cl_abap_container_utilities=>fill_container_c
all charecter values are moving into variable but number values or coming as #
Is there any solution to pass values into variable without losing actual values
Regards
Deepak

Hi kuladeep reddy,
do not use any function modules or classes. Just MOVE a to b or MOVE-CORRESPONDING structure_a to structure_b.
This will fail if you try to move a characters to a numeric field. The other way it works
Regards,
Clemens

Similar Messages

TS3623 IN THE MIDDLE OF A MOVIE ... APPLE TV STOPS WORKING. I HAVE YET TO WATCH A MOVIE FROM BEGINNING TO END WITHOUT APPLE TV LOSING ITS CONNECTION TO MY NETWORK

I PURCHASED MY APPLE TV ON FEBRUARY 7, 2012. I HAVE YET BEEN ABLE TO WATCH AN ITUNES PURCHASED MOVIE FROM BEGINNING TO END WITHOUT IT LOSING ITS CONNECTION TO MY NETWORK.

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

HT1343 How to move the beginning of a (PDF) document/how to move to the end of a document?

Control-A
Move to beginning of line/paragraph
Control-E
Move to end of line/paragraph
But, how to move to the beginning or end of the document?

I have the Apple keyboard with numeric keypad. The two circled keys move at the beginning and at the end of the document.

Photoshop CS6 Type tool bug solution for special characters move to beginning of string of text

Just started happening and it will not go away. Tried deleting test box and start over and same issue. Bracket ) moves to beginning of string but letters are fine.

Snowball5500 wrote:
[...] hitting the return key only moves the cursor back to the beginning of the line I'm on.
Are you sure leading isn't set to its minimum of 0.01 pt?

Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.

Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.

Everything in your project will be exported when you use the share menu.
If you want to export only half, I suggest that you
1) Select the project in the Project Library.
2) Click FILE/DUPLICATE PROJECT
3) Give the duplicate a name, like Project A snippet.
4) Open the duplicate project in the Project editor and delete the segments that you do not need.
5) Then Share.
You mentioned surrounding a portion of the clip you were editing in Yellow. Once you do this, you should right-click and then select either DELETE SELECTION, TRIM TO SELECTION, or one of the other options available. That is a key tool in editing.
You mentioned MPEG Streamclip. I agree that MPEG Streamclip is a great tool.

Cann't move data between two internal table in Unicode program

Hello expert,
I import a program from old sap system to new system, but syntax error occurred --- ' L_T_S776[] = T_DATA_RECORDS[]. ',
it is said ' internal table L_T_S776 and T_DATA_RECORDS are not mutually convertible, in unicode program, two internal tables must have the same structure layout'.
The coding is:
DATA: L_T_S776 LIKE S776 OCCURS 0 WITH HEADER LINE.
DATA: L_T_S777 LIKE S777 OCCURS 0 WITH HEADER LINE.
FIELD-SYMBOLS: <F_S776> TYPE S776.
FIELD-SYMBOLS: <F_S777> TYPE S777.
IF NOT ZCL_USEREXIT=>IS_ACTIVE( PROJN = 11 EXITN = 34 ) IS INITIAL.
CASE I_RMCP2-SCTYP.
    WHEN 'Z776'.
      L_T_S776[] = T_DATA_RECORDS[].
      LOOP AT L_T_S776 ASSIGNING <F_S776>.
        <F_S776>-ZZCUSER = SY-UNAME.
        <F_S776>-ZZCDATE = SY-DATUM.
        <F_S776>-ZZCTIME = SY-TIMLO.
      ENDLOOP.
     T_DATA_RECORDS[] = L_T_S776[].
    WHEN OTHERS.
ENDCASE.
internal table T_DATA_RECORDS is defined to like INDX.
this program is in function module EXIT_SAPMMCP6_011, it is a user_exit.
I also confuse the meaning of this part of coding, could anybody help me?
reward if got useful reply, thank you.
H.B

Hi,
The structure are different thats why you getting this error. But there must be some fields common to which you want to move data. So you change in that way.
And there will be no impact whatsoever because of such change.
Regards,
Atish

AA6 - Move To Beginning/Ending Of A Selection And Deselect

Hello...
In AA3- you could make a selection, then click at the beginning/ending of the selection. It would deselect the selection and move the play head to that position.
In AA5.5 you had to use the left/right arrows to do the same task.
In AA6, neither work. If you left/right arrow, the play head moves but it moves down/up the timeline (not to the beginning/ending) and it doesn't deselect. Ctrl+left/right arrow does move the play head to the appropriate places (as well as other places) but it doesn't deselect.
Is there a way to do this with AA6?
I used it a lot when doing track breaks for cd (home, shift+click at 5:00, f8, right arrow, shift+click at 10:00, f8, etc...). I also used it where I wanted to have only 0.5 seconds of extra silence at the beginning/ending of some audio (click at the beginning of the audio, drag backwards 0.5 seconds, left arrow, shift+home, delete).
JJ

Since you're doing this for CD, I think I have a method that would be faster for you.
1. Home, Shift+M (This sets the playhead to the start and places a CD Track Marker at the playhead).
2. Click where you want this track to end and the next to start and again press Shift+M.
3. Continue placing single point CD Track Markers at each location where you want the last track to end and the new one to start (including adding one to the very end).
4. When all markers have been added, open the Markers Panel and select all the markers.
5. Press the icon in the Markers Panel for "Merge selected markers".
Now if you want to burn the CD, just go to "File > Export > Burn Audio to CD..." and we will burn a CD with track markers where you hae defined them.
--Ron

How to focus the tab in Firefox 3.6 (to move to beginning/end)

I believe in previous versions of Firefox, when the tab was focused, you could use the keyboard shortcuts ctrl+end or ctrl+home to move the focused tab to either the end or beginning of your tabs. This functionality no longer seems to work, I believe because I can no longer actually focus a tab. Previously, but selecting the tab, I'd see a little box highlighting the text inside of the tab. I can still drag tabs to different locations, but being able to move them all the way to the beginning or end with a keyboard shortcut is a lot faster.
== This happened ==
Every time Firefox opened
== I believe in 3.6

Hello,
I had this problem too. It seems to be a request since Firefox 3.5. You must have focus on tabs bar in order the shortcuts [Ctrl][Left] and [Ctrl][Right] work. You can read information about that here: https://bugzilla.mozilla.org/show_bug.cgi?id=462289
I made a small plugin to provide new shortcuts to move tabs: https://addons.mozilla.org/en-US/firefox/addon/220875/

Can we create a structure with string type not char??

Hi All
Can we create a structure with type STRING not as a CHAR type??
Please its urgent.
Regards
Deepanker

HI,
Yes, you can string instead of CHAR.
Please follow the steps below :
SE11 --> Table name --> Create Button --> And input the short description and necessary Delivery and Maintenance fields --> Select Fields tab --> Input some name on field --> And Click on Predefined button --> Press F4 on Data type column --> a Pop window will be displayed --> Select String from that.
Thanks,
Sriram Ponna.

Why is it when I add photos from iPhoto onto an iMovie project, it is not displayed when I play the movie from beginning to end, although I can see it in the (edit) format?

Hi everyone,
I'm just wondering why is it that when I place an image from iPhoto to an iMovie project, it is not displayed when I play it from beginning to end in fullscreen playback mode? However, when I exit it on the timeline, it is shown. All I did as drag it from the iPhoto column and place on at the beginning. I would really appreciate someones help because I really need to be able to place images onto my projects. Thanks!

Sounds like your talking about iMovie for Mac?
This is the iOS version, repost here:
iMovie

Char unicode related question

char c = '\u000d';
char d = '\u000a';
char e = '\u0000';
char f = '\uface';
first two statements are giving compilation errors! Im unable to resolve the problem! Please help me!
Thanks in advance!

I prefer these forms:
char c = (char)0xd;
char d = (char)0xa;
..

Highlight box object moves to beginning of timeline

In Captivate 4, has anyone else had the problem with the highlight object in the toolbar moving to the beginning of the timeline after entering the properties and clicking OK? Very annoying, as I have to drag it back to where it was first being created each time. This didn't happen in versions 2 or 3...

Hi Trevor,
Adobe recently released an update for Adobe Captivate. Did you install that update? If no, you could get the update information from here
Please install this update and then try your scenario.
Manish
http://blogs.adobe.com/captivate

Is there a way of triggering a movie from Quicktime at a specified time? For example the time is 21:00 and I want the movie to begin playing at 21:30.

Thanks

Sure - easiest way is to make an album for photos you want to order and drag photos to it - when it is complete open the album, select all and order
LN

Itunes wont download my movie HELP!!!!!!! err - 3150

I am trying to download a movie adn ieverytime i try to download it it comes up with a message that says that itunes could not connnect threw network, and yes my computer is on a network andyes it is connected to the internet, becuase if it wasn't i wouldn't be sending this to you know. HELP I need this and i wont let me download it. the error code i keep getting is "err - 3150". HELP!!!!!!!!!!!!!!
please reply

I'm having this same awful problem.... I tried to download highlights of Steelers vs. Chiefs and everytime I try to re-download... ERROR 3150!!!!

How can I move out the char Θ

hello.
How can I move out the char Θ (unicode U+0398) оn Jspx-page used af:outputlabel.
When I write <af:outputLabel value="27. char(Θ)" />, application auto replace on char "?".
thx, Dema.

Hello
Probably an encoding problem.
try changing your charset into your JSP:
ex: <jsp:directive.page contentType="text/html;charset=UTF-8"/>
I tried it and it works for me
Jack

Move structure begins wt nonchar to Char - Unicode - incompatibility err

Similar Messages

Maybe you are looking for