Move text from one artboard to another

Hi I have 3 artboards open and am trying to move text from one artboard to another, each piece of text is on a different layer, but when I use the selection tool and just drag it across to the next artboard, nothing shows up.  How do I move text from one artboard to another?  Thanks

Dont worry I now have it sussed.  I just needed to move the layers up in the stacking order.

Similar Messages

  • I have never used PS, and I am trying to edit a brochure created by someone else.  I need to move text from one column to another

    I have never used PhotoShop and do not have time at the present. Please help me to move a section of text from one column to another in a brochure.

    Here are 3 options for future reference:
    1. With the setup you've described, apply a Match Move behavior to  the text and make the rectangle the source. Change the Transform parameter to Mimic source.  This way you can still adjust the text postion as needed, but the rectangle will drive the animation.
    2. Use a group to do the animation.  Put both your rectangle and text in the same group and animate the group's postion.
    3. Use the Link behavior.
    Each of these has it's advantages depending on what you need.

  • How do I move text from one chapter to another

    I imported a book I had written in pages.  I want to divide it into chapters but at present it is all in chapter 1.
    How can i make four or five new chapters but move the content from chapter one.
    Thank you,
    Alain

    From a previous thread:
    Touch and hold any icon for a couple of seconds. They'll all start to wobble. Touch and drag the one you want to move to the side of the screen and the next screen will appear; drop the icon on whatever screen you want it on.
    You can also do it quicker in iTunes - connect the phone and click the Apps tab in the main window. You'll see a picture of your phone with the apps laid out. Just click and drag

  • Move text from one column to another depending on character count

    Hello,
    I am trying to find a way to have text start in a specific column depending on the character count.
    Basically our site will have 3 columns. For example if the text only has about 300 Characters - it would start in the right column. If it had between 301 & 600 characters - it would start in the middle column and run to the right column. If it had more than 601 characters - it would start in the left column and run to the middle then right column.
    Is this possible?
    Thanks in advance for any help!
    James

    If you look at the String class you can probably devise a series of steps to do what you want using some basic logic.  The String class has a length property that tells you how many characters it contains.  Assuming you wouldn't want to split words, you could use something like the indexOf method to find the nearest blank space following the 300th character.  Then you would be wanting to build different strings for the different segments you create.

  • How to move cursor from one textfield to another textfield byusing enterkey

    hii all,
    I have a problem in java script.
    To move cursor from one textbox to another text box ,I have take the length of the textboxes of the first column.I used onkeyDown event .
    in the function ,firest i checked the condition like
    for(i=0;i<form1.box.length;i++) //box is the name of the textboxes
    if(event.keyCode==13)
    form1.box[i+1].focus();
    return false;
    by using this the cursor is moving from first text box to secon textbox and stops.
    if i use event.returnValue=false; instead of return false ,then the cursor automatically going to the laxt textbox of the column.
    my problem is how i can focus the cursor from one textbox to another textbox one after the other till the end.
    if any one has solution please help me.
    also if we can do in another way also,please help me.
    thanx.>

    try the following code :
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    <HTML>
    <HEAD>
    <TITLE> New Document </TITLE>
    <META NAME="Generator" CONTENT="EditPlus">
    <META NAME="Author" CONTENT="">
    <META NAME="Keywords" CONTENT="">
    <META NAME="Description" CONTENT="">
    </HEAD>
    <SCRIPT language="Javascript">
    function fnTest(str)     {     
              if(event.keyCode==13)          {
                   if(str == 4)     {
                        formHeader.box[0].focus();
                   else     {
                        formHeader.box[parseInt(str)+1].focus();
                   return false;
    </SCRIPT>
    <BODY>
    <FORM name="formHeader">
    <CENTER>
    <INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('0');">
    <br>
    <INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('1');">
    <br>
    <INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('2');">
    <br>
    <INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('3');">
    <br>
    <INPUT TYPE="TEXT" name="box" value="" onKeyDown="javascript:fnTest('4');">
    </CENTER>
    </FORM>
    </BODY>
    </HTML>
    ----------------------------------------------

  • [CS3 JS]  Move pages from one document to another?

    First, a brief explanation of what I am trying to do. I have several individual chapters that I am including in an INDD book. However, I also want to be able to allow those individual chapters to stand alone, meaning that I want to add a cover/title page to each chapter file (these two pages would be placed before the current page 1 of each chapter).
    My preference would be to write a script that would open the cover/tp file and open the first chapter file; this part is no problem. Where I am running into trouble however, is the second step: moving the cover/tp pages (2 pages) over into the chapter file.
    Manually, I would open Cover.indd, activate the "move pages" menu, "Move pages: 1-2", "Destination: Before_Page 1", "Move to: Chapter1.indd".
    With over 100 chapters in the book, however, I would prefer to automate the process. I have looked into the Page.move and PageItem.move elements, but both look like they would require a location in the current document (either in (x,y) form or using "AT_BEGINNING".
    If I cannot get this to work, I will likely try to insert two blank pages, then cut/paste with a script, but I would prefer the "move" functionality, if it is possible.
    A couple of answers to potential questions:
    I can't simply place the INDD cover file b/c it uses a text variable to pull the chapter name; this personalizes each stand-alone chapter.
    Same answer to why I can't just slap the 2-page .pdf on the front of each. I need the text variable to still be active.
    Has anyone tried to move pages from one document to another using scripting? I tried to explain what I am trying to do, but if it doesn't make sense, I can try again. :)
    thanks!
    Matt

    ok here we are
    I get a raw skeleton that you will have to adjust but it's functional.
    Use a PDF for placement as you can specify the page that you want to place.
    I don't know if you can do the same for indesign files.
    So basically, it starts adding 2 pages and placeing the pdf in the same time.
    After that, it creates the textVariable and the frame that will receive it.
    Here you are:
    //If a document is open
    if(app.documents.length!=0)
    var ad = app.activeDocument;
    //Pages placement
    for(i=0; i<2; i++)
    //Add 2 pages on top of the document;
    var tmpPg = ad.pages.add(LocationOptions.BEFORE, ad.pages[0]);
    //Here you place your pdf
    app.pdfPlacePreferences.pageNumber = i;
    tmpPg.place(File(cover.pdf), false)
    //You should specify page x and page y but ain't found yet the way to go.
    //Text variable creation
    //Check if the textVariable named "txtVar" does not already exist...
    if(ad.textVariables.item("txtVar")==null)
    //if not found, create the text variable named "txtVar"
    var txtVar = ad.textVariables.add();
    txtVar.variableType =VariableTypes.CUSTOM_TEXT_TYPE;
    txtVar.name = "txtVar";
    //Set the contents of the text variables to the string "test"
    ad.textVariables.item("txtVar").variableOptions.contents = "test";
    //these coordinates don't care aboutyour units but you may adjust them to your needs
    var y1 = ad.marginPreferences.left;
    var x1 = ad.marginPreferences.top;
    var y2 = y1+5;
    var x2 = x1+25;
    var myFrame = ad.pages[0].textFrames.add({geometricBounds:[y1,x1,y2,x2]});
    //Set the contents of the frame to the text variables "txtVar"
    myFrame.contents=ad.textVariables.item("txtVar").variableOptions.contents;
    //You may want to stylize the txtVar
    //In this case, either you use a existing characterStyle or you create one in the script
    Bye Loic

  • How to move object from one cont. to another

    Hi I am not able to move object from one container to another container in work order driver. while when i am same line of code in JMS driver its working fine and also log genarated for the same. but in work ordre driver it is not working. here is my code which i m using for the same.ple help me out
    <do-move-src-object class-name="ValeUser">
    <arg-dn>
    <token-local-variable name="var-str-nwoContent"/>
    </arg-dn>
    <arg-dn>
    <token-text xml:space="preserve">\</token-text>
    <token-global-variable name="dirxml.auto.treename"/>
    <token-text xml:space="preserve">\</token-text>
    <token-global-variable name="hrfeed.inactive.container"/>
    </arg-dn>
    </do-move-src-object>
    thanks
    Adarsh Kumar

    Idmlearner,
    sorry, but you are still posting in the wrong forum. You should ask
    these questions in the Identity Manager forum
    Shaun Pond

  • Bulk move users from one group to another in XI 3.1

    Hi all,
    I have a group that contains approximately 20,000 users. I now need to move around 7,500 of these users into a different group.
    How can I do this programatically in bulk as I don't want to go through and manually change the groups of 7,500 users?
    Thanks,
    Chris

    Hi Christian,
    Assuming you would need to move users from one group to another and remove them from the previous group, you could use the attached java code.
    To run the code, you would need to save it as .jsp file and paste it inside AdminTools application context.
    The pre-requisite to run this code is to create a Text file with all the 7500 user names in it. The text file should contain one user per line
    (example:
    User1
    User2
    User3
    You can get this information from query builder by running the below query
    Select top 20000 si_name from ci_systemobjects where si_kind='user'
    Initially do it for 2-3 users to text the results.
    You would need to edit the jsp and modify these three lines
    1.
                    * Assign user to a group
                   //Query for the group ID
                   boQuery = "Select SI_ID From CI_SYSTEMOBJECTS Where SI_KIND='UserGroup' And SI_Name='UserGroup name'";
    Above in SI_NAME, you would need to provide the usergroup name you want your users to be added to.
    2.
    if (boUserInfoObject.getGroups().remove(Group Id from which it has to be removed)) {
                            out.print("User removed from group successfully. ");
    Above you would need to provide the id of the group you want the users to be removed from(i.e the current group from where you want them to be moved).
    3.
    * Path to file containing User names.
    final String USER_FILE_PATH = "<Path of txt file from which list of users will be imported>";
    Above you need to specify the path of the text file which contains all the user names.
    Incase you require further assistance on SDKs, raise your concerns in the below space
    http://scn.sap.com/community/bi-platform/java-sdk
    Thanks,
    Prithvi

  • Can I move applications from one user to another on the same computer?

    If I have two users on one mac, can I move applications from one user to another on the same computer?
    Thanks

    By default, apps are installed for all the users in /Applications

  • Can i move money from one account to another?

    Can i move money from one account to another?

    Basically, no; only the iTunes Store staff can do this, and then only by putting the balance from a completely unspent gift card back onto the card.
    (83942)

  • How do I move contacts from one group to another?

    I entered several contacts in address book.  How do I control which group they are assigned to at the time of entry?  The ones I added showed up in my office contacts in Outlook instead of in Hotmail/iCloud.
    Is it possible to move them from one group to another once entered?

    Do the contacts that are not in iCloud belong to an external account such as Gmail, Yahoo or an Exchange account?  Or, do they belong to On My iPhone?

  • How do I move files from one album to another?

    How can I move files from one album to another? And why does itunes split up imported folders?

    Press the Command key while dragging them.
    (58054)

  • Can I move photos from one computer to another using Vault?

    Can I move photos from one computer to another using Vault?  I use an external hard drive as a vault for my Imac and I want to import photos to my Macbook pro.  I have aperture 3 on both units.  Can I just plug the ext. drive into the laptop and import from the vault?

    You can't import from the vault but you can restore that vault onto the MBP. This will restore the complete library that is contained in the vault.

  • TS3274 How do I move icons from one screen to another?

    How do I move icons from one screen to another. 

    Hold down on one icon until they start shaking, then drag the icon to the edge of the screen, and the screen should slide to the next one, you can then drop it on that screen or drag it again to the edge to move to the next screen.
    Page 21 of the user guide explains this under Arranging Apps:
    http://manuals.info.apple.com/en/ipad_user_guide.pdf

  • How can I copy text from one card to another while creating cards using Iphoto?

    I created two cards with different pictures using Iphoto on Macnotebook. 
    I want to use the same text message.
    How can I copy text from one card to another?

    select the text and copy (edit menu ==> copy) tehn gpo to the next card and paste
    LN

Maybe you are looking for