Moving cells and cell outlines together?

i have a very long spreadsheet and would like to get rid of a DASHED BOLD outline around the cells.
is there some method for getting rid of the dashed bold outline as it runs through 800 rows and i don't want to have to redo all the sections to get rid of it.
i have tried moving the cell - one single DASHED BOLD line still runs vertically through my spreadsheet.
i also tried deleting the remaining DASHED BOLD line but this just deletes the whole line so it looks like two cells are together.
i think i am out of luck with this and have to redo all the formatting in all the sections below is that right?

hi jerry. thanks. i think with a lot of your (and other) help i have wrestled this into shape over here and hope to finish this weekend.
can i just ask you a little more on this one? my problem is that i have a series of /sections/ that go vertically downward so that lower in your screenshot i may have cells that are outlined in black and in bold and in 3pt width. so in the case here i would be selecting the Column and telling it to go back to THIN because when i deleted the Column that had a bold and dashed and 3pt outline it /left/ this outline in place for the cell next to it.
however, if i now tell the whole column to go back to thin, this means that wherever i had THICK outline inbetween the sections in this column or wherever i had no outline between columns it would now be thin.
i mean, this is very hard to explain but i am positive that the time i spend on the outlines in this spreadsheet is 3X the amount of time i actually spent working on the spreadsheet because i was constantly having to go through 800 cells in 18 sections and REFORMATTING something that got lost or something that could not be fixed (or copied) in a single or multiply selectable way.
also, when i reformat a cell do i almost always have to select the cell, select the outline are to be affected, select the linetype, select the width AND select the color? or is there some STYLE functionality i should start using or some DEFAULT SETUPS that i can use for this instead?
even SIMPLY being able to multiple select and do a format outline for a cell would be a huge improvement for me. am i missing something and you CAN multiply select to do outlines or maybe i am misunderstanding somehow that numbers has some really smart feature i am not understanding and telling a whole column to go back to thin will only affect the areas that are dashed and bold and it will leave alone the cells that are solid outline bold or no outline at all?
seems to me like the program is 25% finished in some respects and 50% finished in other respects and 95% finished in different areas...

Similar Messages

Moving cells

Hello,
I have a probleme with a table.
I created a table with columns header but when I want to enter values in cells some cellls are moving from right to left and i don't understand why. It is funny but not very useful! If someone can help me it would be nice!
Please find attached my VIs with the creation of the table and the table with moving cells.
Thanks
Jean
Solved!
Go to Solution.
Attachments:
set up sequence table.vi ‏27 KB
Moving cells.vi ‏10 KB

You don't actually have to run the VI. Just open 'Moving cells' and type something into column 11. Then just watch it float away. Change the justification to Right or Left and the behavior stops.

How to move Line, Grid and X Ticks together?

The code below plots a XYLineChart: by left mouse click and drag the plotted line can be translated left/right.
package javafxapplication3;
import javafx.application.Application;
import javafx.beans.property.SimpleDoubleProperty;
import javafx.event.EventHandler;
import javafx.scene.chart.NumberAxis;
import javafx.scene.chart.XYChart;
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.chart.LineChart;
import javafx.scene.input.MouseEvent;
import javafx.scene.layout.BorderPane;
public class GridMove extends Application {
BorderPane pane;
XYChart.Series series1 = new XYChart.Series();
SimpleDoubleProperty rectinitX = new SimpleDoubleProperty();
SimpleDoubleProperty rectX = new SimpleDoubleProperty();
SimpleDoubleProperty rectY = new SimpleDoubleProperty();
@Override
public void start(Stage stage) {
final NumberAxis xAxis = new NumberAxis(1, 12, 1);
final NumberAxis yAxis = new NumberAxis(0.53000, 0.53910, 0.0005);
xAxis.setAnimated(false);
yAxis.setAnimated(false);
yAxis.setTickLabelFormatter(new NumberAxis.DefaultFormatter(yAxis) {
    @Override
    public String toString(Number object) {
        return String.format("%7.5f", object);
final LineChart<Number, Number> lineChart = new LineChart<Number, Number>(xAxis, yAxis);
lineChart.setCreateSymbols(false);
lineChart.setAlternativeRowFillVisible(false);
lineChart.setAnimated(false);
lineChart.setLegendVisible(false);
series1.getData().add(new XYChart.Data(1, 0.53185));
series1.getData().add(new XYChart.Data(2, 0.532235));
series1.getData().add(new XYChart.Data(3, 0.53234));
series1.getData().add(new XYChart.Data(4, 0.538765));
series1.getData().add(new XYChart.Data(5, 0.53442));
series1.getData().add(new XYChart.Data(6, 0.534658));
series1.getData().add(new XYChart.Data(7, 0.53023));
series1.getData().add(new XYChart.Data(8, 0.53001));
series1.getData().add(new XYChart.Data(9, 0.53589));
series1.getData().add(new XYChart.Data(10, 0.53476));
pane = new BorderPane();
pane.setCenter(lineChart);
Scene scene = new Scene(pane, 800, 600);
lineChart.getData().addAll(series1);
stage.setScene(scene);
scene.setOnMouseClicked(mouseHandler);
scene.setOnMouseDragged(mouseHandler);
scene.setOnMouseEntered(mouseHandler);
scene.setOnMouseExited(mouseHandler);
scene.setOnMouseMoved(mouseHandler);
scene.setOnMousePressed(mouseHandler);
scene.setOnMouseReleased(mouseHandler);
stage.show();
EventHandler<MouseEvent> mouseHandler = new EventHandler<MouseEvent>() {
@Override
public void handle(MouseEvent mouseEvent) {
    if (mouseEvent.getEventType() == MouseEvent.MOUSE_PRESSED) {
        rectinitX.set(mouseEvent.getX());
    else if (mouseEvent.getEventType() == MouseEvent.MOUSE_DRAGGED || mouseEvent.getEventType() == MouseEvent.MOUSE_MOVED) {
        LineChart<Number, Number> lineChart = (LineChart<Number, Number>) pane.getCenter();
        NumberAxis xAxis = (NumberAxis) lineChart.getXAxis();
        double Tgap = xAxis.getWidth()/(xAxis.getUpperBound() - xAxis.getLowerBound());
        double newXlower=xAxis.getLowerBound(), newXupper=xAxis.getUpperBound();
        double Delta=0.3;
        if(mouseEvent.getEventType() == MouseEvent.MOUSE_DRAGGED){
        if(rectinitX.get() < mouseEvent.getX()){
            newXlower=xAxis.getLowerBound()-Delta;
            newXupper=xAxis.getUpperBound()-Delta;
    else if(rectinitX.get() > mouseEvent.getX()){
            newXlower=xAxis.getLowerBound()+Delta;
            newXupper=xAxis.getUpperBound()+Delta;
        xAxis.setLowerBound( newXlower );
        xAxis.setUpperBound( newXupper );
        rectinitX.set(mouseEvent.getX());
    public static void main(String[] args) {
        launch(args);
}My question is: now by moving the Line left/right, Grid and X Ticks does not move: so, how to translate Line, Grid and X Ticks together?
Any help really appreciated!
Thanks
Edit: nobody willing to help?
Edited by: 932518 on 30-ott-2012 1.31
Edited by: 932518 on 31-ott-2012 8.49

Some code improvements, now grid and line moves together. It only remains to move X axis ticks along with line and grid, and vertical grid lines are missing outside line range values
import javafx.application.Application;
import javafx.beans.property.DoubleProperty;
import javafx.beans.property.SimpleDoubleProperty;
import javafx.collections.ObservableList;
import javafx.event.EventHandler;
import javafx.scene.chart.Axis;
import javafx.scene.chart.NumberAxis;
import javafx.scene.chart.XYChart;
import javafx.scene.chart.XYChart.Series;
import javafx.stage.Stage;
import javafx.scene.Node;
import javafx.scene.Scene;
import javafx.scene.chart.LineChart;
import javafx.scene.input.MouseEvent;
import javafx.scene.layout.BorderPane;
import javafx.scene.shape.LineTo;
import javafx.scene.shape.MoveTo;
import javafx.scene.shape.Path;
public class GridMove extends Application {
BorderPane pane;
XYChart.Series series1 = new XYChart.Series();
SimpleDoubleProperty rectinitX = new SimpleDoubleProperty();
SimpleDoubleProperty rectX = new SimpleDoubleProperty();
SimpleDoubleProperty rectY = new SimpleDoubleProperty();
LineChart<Number, Number> lineChart;
@Override
public void start(Stage stage) {
    final NumberAxis xAxis = new NumberAxis(1, 12, 1);
    final NumberAxis yAxis = new NumberAxis(0.53000, 0.53910, 0.0005);
    xAxis.setAnimated(false);
    yAxis.setAnimated(false);
    yAxis.setTickLabelFormatter(new NumberAxis.DefaultFormatter(yAxis) {
        @Override
        public String toString(Number object) {
            return String.format("%7.5f", object);
    lineChart = new LineChart<Number, Number>(xAxis, yAxis);
    lineChart.setCreateSymbols(false);
    lineChart.setAlternativeRowFillVisible(false);
    lineChart.setAnimated(false);
    lineChart.setLegendVisible(false);
    series1.getData().add(new XYChart.Data(1, 0.53185));
    series1.getData().add(new XYChart.Data(2, 0.532235));
    series1.getData().add(new XYChart.Data(3, 0.53234));
    series1.getData().add(new XYChart.Data(4, 0.538765));
    series1.getData().add(new XYChart.Data(5, 0.53442));
    series1.getData().add(new XYChart.Data(6, 0.534658));
    series1.getData().add(new XYChart.Data(7, 0.53023));
    series1.getData().add(new XYChart.Data(8, 0.53001));
    series1.getData().add(new XYChart.Data(9, 0.53589));
    series1.getData().add(new XYChart.Data(10, 0.53476));
    pane = new BorderPane();
    pane.setCenter(lineChart);
    Scene scene = new Scene(pane, 800, 600);
    lineChart.getData().addAll(series1);
    stage.setScene(scene);
    scene.setOnMouseClicked(mouseHandler);
    scene.setOnMouseDragged(mouseHandler);
    scene.setOnMouseEntered(mouseHandler);
    scene.setOnMouseExited(mouseHandler);
    scene.setOnMouseMoved(mouseHandler);
    scene.setOnMousePressed(mouseHandler);
    scene.setOnMouseReleased(mouseHandler);
    stage.show();
EventHandler<MouseEvent> mouseHandler = new EventHandler<MouseEvent>() {
    @Override
    public void handle(MouseEvent mouseEvent) {
          if (mouseEvent.getEventType() == MouseEvent.MOUSE_PRESSED) {
            rectinitX.set(mouseEvent.getX());
        } else if (mouseEvent.getEventType() == MouseEvent.MOUSE_DRAGGED || mouseEvent.getEventType() == MouseEvent.MOUSE_MOVED) {
            LineChart<Number, Number> lineChart = (LineChart<Number, Number>) pane.getCenter();
            NumberAxis xAxis = (NumberAxis) lineChart.getXAxis();
            double newXlower = xAxis.getLowerBound(), newXupper = xAxis.getUpperBound();
            double Delta = 0.3;
            if (mouseEvent.getEventType() == MouseEvent.MOUSE_DRAGGED) {
                if (rectinitX.get() < mouseEvent.getX()) {
                    Delta *= -1;
                newXlower = xAxis.getLowerBound() + Delta;
                newXupper = xAxis.getUpperBound() + Delta;
                xAxis.setLowerBound(newXlower);
                xAxis.setUpperBound(newXupper);
                DoubleProperty p1 = xAxis.scaleXProperty();
                DoubleProperty p2 = xAxis.translateXProperty();
                double horizontalValueRange = xAxis.getUpperBound() - xAxis.getLowerBound();
                double horizontalWidthPixels = xAxis.getWidth();
                //pixels per unit
                double xScale = horizontalWidthPixels / horizontalValueRange;
                Set<Node> nodes = lineChart.lookupAll(".chart-vertical-grid-lines");
                for (Node n: nodes) {
                    Path p = (Path) n;
                    double currLayoutX = p.getLayoutX();
                    p.setLayoutX(currLayoutX + (Delta*-1) * xScale);
                double lox = xAxis.getLayoutX();
            rectinitX.set(mouseEvent.getX());
public static void main(String[] args) {
    launch(args);
}Any help very much appreciated!

ITunes Fix for Manually Moving Music and other Media

Intro
Any iTunes 7.x user who manages their own music library outside of the "iTunes Music" folder might be able to tell you that iTunes DOES NOT respond well after manually moving tracks from one place to another on their computer systems. In fact, any file you move becomes immediately unplayable in iTunes. And, if you're anything like I am, losing several years worth of song rating metadata and playlists is not a good incentive for change. However, one thing others might not be able to tell you is that there's an easy workaround for the problem and you get to keep your playlists, ratings and other info. Read on to learn about the workaround.
About the Workaround
The workaround is a simple hack I devised after recently transferring a good portion of my music library between hard disks and running into problems with iTunes. The fix steps provided below are intended to circumvent the problems with iTunes and give users the freedom to move songs and other media files on their computers while maintaining the integrity of both the ratings and the playlists. Meaning you won't need to manually update the song locations in iTunes one-at-a-time, which, at version 7.02 is the only way to accomplish this task using the program.
Please be aware that not all information is retained using this workaround. What will be lost are the following: the "Recently Added", "Recently Played" and "Top 25 Most Played" iTunes Smart Playlists; any media file play counts; last played information; and possibly some other data used only internally by iTunes.
So, if you're comfortable parting with some metadata while keeping your cherished song ratings and playlists intact during file relocation, read on to learn how to use the workaround.
Workaround Steps
The following instructions walk step-by-step through the process of this workaround.
Note: All backslashes used in file paths have been converted to forward slashes so that they will adhere with MySpace XSS security validation checks. These altered paths can still be copy/paste into Windows Vista's Explorer program once the Username is changed to the User Account where the iTunes files reside.
Preparing for the Move
Before you move your files, do the following:
1. Close iTunes.
2. Create a backup copy of the following files:
iTunes Library XML (iTunes Music Library.xml)
Note: Vista users can find the Library XML at C:/Users/Username/Music/iTunes
iTunes Music Database (iTunes Library.itl)
Note: Vista users can find the Music Database at C:/Users/Username/Music/iTunes
Moving Your Files
This part should be self explanatory, but while you do it make sure to note the following two things:
1. The path where the files were previously stored (e.g. D:/Music).
2. The path where the files will end up (e.g. E:/Music).
Execute the Fix
After your files are moved, complete the following steps to implement the fix.
Note: Do not open iTunes during this process.
Hack the iTunes Library XML
Once the files are moved the Library XML file locations will be out of sync. Follow the steps below to update them so that they now reference the correct file locations.
1. Open the iTunes Library XML with a Text Editor with a Find/Replace function.
Note: Vista users can find the Library XML at C:/Users/Username/Music/iTunes
Tip: Do not try to do this with Dreamweaver if your Library XML is greater than 10MB.
2. Perform a Find/Replace using the following inputs:
Find: Path from Step 1 of Moving Your Files
Replace: Path from Step 2 of Moving Your Files
3. Confirm your results, and then save and close the Library XML.
Delete the iTunes Music Database
Hacking the iTunes Library isn't enough to fool iTunes. Like the Library XML, the Music Database also holds the file locations of all of the media stored within the program. And it's smart enough to wipe out the Library XML hack if iTunes is opened before completing this step.
Ensure you have backed up the iTunes Music Database (iTunes Library.itl) and delete the file.
Note: Vista users can find the Music Database at C:/Users/Username/Music/iTunes
Back in iTunes
Once the fix is in place you can now open iTunes again. You will notice that all of your playlists, music and other items have vanished. In order to recover them all (with the exception of the Smart Playlists mentioned in the About the Workaround section above) we'll need to import the hacked Library XML file back into iTunes.
1. Open iTunes and press CtrlShiftO or go to File > Import…
2. Navigate to and Open your modified Library XML (as pictured below).
3. iTunes will then begin importing the contents of the XML file (as pictured below).
Note: This process may take a while, depending on the size if your library.
Wrapping Up
Once the import process is complete iTunes will look almost exactly the way you left it, with the exception that some playlists have been duplicated and the number of songs may be a hair off. To fix this problem delete any duplicate playlists in the "Library" panel in iTunes. You can now test out the changes by selecting an item moved earlier and testing it out. All that's left from there is to let iTunes perform any automated analysis it needs to do and rock on.
Other OS

Holy Smokes:
I appreciate your detailed workaround post. My question is this: I use iTunes to keep everything organized (though I'm well aware of the shortcomings...) and can use the simple solution that Chris from CA posted, but I don't have room to consolidate everything. My read on consolidating is that you copy from wherever you have your music located (and right now my music is outside of the MyMusic/iTunes folder, as that backs up to my work server) and so you have to have enough room for all of your music to be copied (and then you delete it from its prior location). That's how Apple describes it in, e.g., http://docs.info.apple.com/article.html?artnum=301748. I ain't go that kind of room. Is there any way to make the move to a completely different PC by following the simple option? From the posting I just linked it sounds like you MUST consolidate whether you use you iPod to move things or use an external drive.
Of course, I can use your workaround, but I thought I'd ask first. Many thanks.
Windows XP Pro iPod Video 60gb

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,change remotes, no change.Help please.

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying. iPhone remote app works just fine. Any suggestions?

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

What key(s) do i type to change language from english to other? i am writing s story in dual languages. i was told to click command and space bar together but it is not working.

what key(s) do it type to change language from english to other? i am writing a story in dual languages. I was told to click command and space bar together but it is not working.

Command Spacebar opens Spotlight as you have found out. If you want to change languages you need to say what app you are using to write the story in, I'm guessing you are using Pages or MS Word. If that's the case
Pages: Open Inspector - Click the T tab - Click Language and change your language.
MS Word: Tools Menu - Language - Choose your language.

Perform static and dynamic check together on a customer?

Hello All,
Is it possible to perform static and dynamic check together on a customer?
I believe standard SAP does not allow both options together.
The scenario is: My client has customer who orders products 1 year in advance and create sales order with a future delivery date. The customer might have balance due on their account which is close to the credit limit. As a result the sale order should be blocked as if the automatic credit check is "Static". This would allow our customer service to call the customer and arrange for the payments.
Then 11 months later, a dynamic check should be performed on the customer to make sure the past due is under the credit limit. If the past due is over credit limit, the sales order must be blocked for delivery as if the credit check was "Dynamic" with 30 days horizon. This would again give our customer service time to settle the payment with the customer.
If anyone has implemented such a scenario, can you please give me an overview of how you did it?
Thanks very much in advance and Text Removed.
With Regards,
AM
Edited by: Lakshmipathi on Nov 13, 2010 9:23 AM
Please dont include this text

Static and Dynamic Cannot be Performed together. They are mutually exclusive events.
Credit check can be performed either at Sale order level or at Delivery / PGI Level.
FCV3 is a good report to see whether a customer would fail a credit check. ( suitable for your customer service )
Coming to your Point , Assuming that the customer is eligible for a Credit of 50 Lacs. Now the Customer has placed an order for 60 Lacs. We set the Customer credit checking at order level . The Customers Sale order would get blocked.
The Customer service will follow up for the payment and see to it that it is made. Assume the customer has made a payment for 70 Lacs.
Now let us have a look at the account statement of the customer.
Account Statement : Customer Cr : 70 Lacs. Dr : 0. ( because no delivery and invoice so far has been made )
So we are supposed to deliver the Material worth value of 60 Lacs.
The First sale order worth 60 Lacs has been unblocked in VKM3. Now at the time of Delivery level why would you want to chekc the Credit limit again ? It has already passed the credit check.
It is not necessary to check credit limit . Because you have already performed the same at the order level.
Now the customer has come again and raised another sale order for 80 Lacs. The System would block him.
The system will never block the Previous delivery which you are, due for delivery to the customer.
If we keep on checking the Credits without delivering we would end up only raising in Sale orders and no Delivery to the Customer at all. The Debit side of his account will always be 0.
So i donot think Static and dynamic is needed . you can go for either Static or Dynamic.

HT5622 My family shared an itunes account and now i'm moving out and have created a new account just for myself. Is there a way to transfer my previous purchases on the other account to my new account?

My family shared an Itunes account and now i'm moving out and have created a new account solely for myself. Is there a way to transfer my previous purchases on the family account to my new account?

In order to continue to play and sync the music you purchased with your old account, you'll need to authorize your new computer/iTunes library to do so. You can do this by choosing Store -> Authorize This Computer and then entering in your old account credentials.
That's all you should need to. Then just create your own account and start purchasing and using it the same you have with the old one.
B-rock

HT1212 Hello. I'm having a problem with my mini iPad. When I went to sign on yesterday the number pad moved up and now it is out of site. I can't sign on the only thing that shows is the Apple logo.

Hello. I'm having a problem signing onto my iPad mini. When I went to sign on yesterday the number pad to sign on moved upward and now it is out of site. Now I can't sign on the only thing that shows is the Apple logo.

Have you tried to give your iPad a reset? Hold down the sleep and home keys until you see the silver apple. Let it reboot and see if it helps.

My grandkids have moved away and I would like to see them by video but she has a Ipad and I don't know what to download to be able to see them. Help, I miss them so much.

My grandaughter has an IPAD and I have a Toshiba computer with Windows 7. My grandkids have moved away and I want to be able to see them by video but my daughter says that I have to download Apple and get facetime? I'm not real computer savvy but I desperately want to see my grandkids. Could you help me please?
Thanks
Rita

Good morning.
FaceTime will not work on a Windows computer. But, I believe that SKYPE has an application that will run on the iPad. So, if you go to SKYPE.com you can see their offerings. You will need to create an account (there may be a fee) and you will need a web camera for your Toshiba ( a Logitech 5500 comes to mind, assuming it does not have one built in already).
Your grandkids will also need to set up a SKYPE account. After that, you should be able to video chat to your heart's content.
Hope this is helpful.

Error while using REMAP_TABLE and WHERE clause together in IMPDP

I am trying to move some records from a very large table to another small table.
I am facing trouble while using REMAP_TABLE and WHERE clause together in IMPDP.
Problem is data filter is not getting applied and all records are getting imported.
here is how I have simulated this. please advice.
CREATE TABLE TSHARRHB.TMP1
A NUMBER,
B NUMBER
begin
Insert into TSHARRHB.TMP1
   (A, B)
Values
   (1, 1);
Insert into TSHARRHB.TMP1
   (A, B)
Values
   (2, 2);
COMMIT;
end;
expdp system/password TABLES=tsharrhb.TMP1 DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp REUSE_DUMPFILES=YES LOGFILE=EXP.log PARALLEL=8
impdp system/password DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY='TSHARRHB.TMP1:"WHERE TMP1.A = 2"' REMAP_TABLE=TSHARRHB.TMP1:TMP3 CONTENT=DATA_ONLY
Import: Release 11.2.0.1.0 - Production on Fri Dec 13 05:13:30 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/********@GRD6.RBSG DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp LOGFILE=SSD_93_TABLES_FULL_EXP.log PARALLEL=8 QUERY=TSHARRHB.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=TSHARRHB.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "TSHARRHB"."TMP3"                           5.421 KB       2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at 05:13:33
here I am expecting only 1 record to get imported but both the records are getting imported. please advice.

The strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3"                             5.406 KB       1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

Satellite A215-S4757: screen started shaking, moving up and down

I purchased my laptop about a year and a half ago and had no major problems till this week.
It began a couple of days ago when the image on the screen started shaking, moving up and down and lines started appearing on the screen and going away. I restarted the computer but the screen did not want to power on. After a few tries it eventually came and worked fine for a while before it began doing the same thing again. This happened a few times until yesterday when no matter how many times i tried it did not come on.
I do not think the problem is only with the screen because I have the laptop connected to my TV through the VGA cable and the image on there did the same thing once as well. Also even though the laptop powers up and the power light lights up, the words SATELLITE do not light up unless the screen comes on.
Also the CAPS LOCK key has a light on it that should be lighting up(when pressed) as well if everything is working fine and it does not light up either.
Does anyone know what I can do to fix this?
Thank you.

You make a good point but I had a notebook from an other manufacture before this laptop and I kept it going for over a year with several problems, each by itself bad enough to stop it from running. I am not saying I have any kind of skill or expertise but with some advice and assistance I think I can fix this myself. I have read some things online that point to the inverter and I have also found instructions on how to take the laptop apart. I wouldn't be so set against going to the ASP if there were any within 100 miles of me but there aren't. For now I'll have to keep looking.

[svn:osmf:] 14521: ChromeLibrary: moving live and recording buttons to the left hand side of the control bar , and making the button backdrops a little bigger.

Revision: 14521
Revision: 14521
Author:   [email protected]
Date:     2010-03-02 12:47:27 -0800 (Tue, 02 Mar 2010)
Log Message:
ChromeLibrary: moving live and recording buttons to the left hand side of the control bar, and making the button backdrops a little bigger.
Modified Paths:
    osmf/trunk/libs/ChromeLibrary/assets/control bar.ai
    osmf/trunk/libs/ChromeLibrary/assets/images/eject_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenEnter_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenLeave_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/live_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/live_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/live_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/minus_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/minus_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/minus_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/pause_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/play_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/plus_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/plus_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/plus_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/record_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/record_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/record_up.png
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/ControlBar.as

Revision: 14521
Revision: 14521
Author:   [email protected]
Date:     2010-03-02 12:47:27 -0800 (Tue, 02 Mar 2010)
Log Message:
ChromeLibrary: moving live and recording buttons to the left hand side of the control bar, and making the button backdrops a little bigger.
Modified Paths:
    osmf/trunk/libs/ChromeLibrary/assets/control bar.ai
    osmf/trunk/libs/ChromeLibrary/assets/images/eject_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenEnter_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenLeave_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/live_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/live_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/live_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/minus_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/minus_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/minus_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/pause_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/play_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/plus_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/plus_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/plus_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_up.png
    osmf/trunk/libs/ChromeLibrary/assets/images/record_disabled.png
    osmf/trunk/libs/ChromeLibrary/assets/images/record_down.png
    osmf/trunk/libs/ChromeLibrary/assets/images/record_up.png
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/ControlBar.as

Moved catalog and now LR won't open it by default. Help?

I'm running LR2 (I know, first step, UPGRADE!), but in the meantime, I had to move my catalog because my drive got full. Under the Backup dialog box I chose the new location. But when I just click on the LR icon to open the program it opens with the default C: drive catalog location that it first installed with. Then I open the specific catalog from in the program and relaunch it. I have LR set to bring the dialog box everytime I start LR since I don't use it everyday. So I back it up when the dialog comes up and when it's done it goes right back to the default catalog with none of my library in there. Why do I have to keep opening the catalog manually?? It's driving me insane at this point. Can someone provide some tips please?? Thanks.

Double-click the moved catalog and Lr will open with it.
But in fact, you did not move the catalog at all. you made a backup of your catalog, and that is what you should do.
But making a backup catalog does not mean that Lr now opens with the backup catalog.
Having a backup means that there are now 2 catalogs: the "working" catalog and the backup catalog. If you had only one (1) catalog, you wouldn't have a backup.
Lr still opens and works with your "working" catalog. That is normal and expected.
If you want to move your "working" catalog do this:
Close Lr. In your OS (Mac Finder / Win Explorer) move (not copy!) the catalog to a different location. Then double-click the moved catalog and Lr will open with it and will use the new location as "working" catalog. But I recommend that you do not put your "working" catalog on the same drive as the "backup" catalog. If that drive fails, you have neither a "working" nor a "backup" catalog. Not good!
But I wonder why you would say your drive got full. Usually the catalog doesn't fill a drive, but your photos are.
Moving the catalog doesn't move your photos.
What you don't know, maybe, is that the catalog and the photos don't have to be on the same drive. So you can leave your catalog on the C-drive and have your photos somewhere else.
If you want to move your photos, you best do this in Lr. If you do it in your OS, you will have to re-link the photos and image folders.
See here on how to do the re-linking:
http://tv.adobe.com/watch/creative-suite-podcast-photographers/lightroom-dude-where-are-my -photos/
http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air. I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but i

I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air. I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but it didn't work. The files copied fine, but when I tell iTunes on the Air to look at the external drive for the library, it doesn't find anything. What I copied was the entire iTunes Media folder. So, how do I move the necessary iTunes files from my old Pro to a external drive so I can access them from my new Air? Whew!

iTunes- How to move the library to an EHD
After you move the library you need to open iTunes by first depressing the OPTION key then launching iTunes. You will be given a choice of which library to use. This can then be made a permanent change, if you wish, in the Advanced section of iTunes preferences.

Moving cells and cell outlines together?

Similar Messages

Maybe you are looking for