MS SQL Server 7 thru JDBC:ODBC bridge

Hi,
I am trying to access MS SQL server 7 thru JDBC ODBC bridge. I am finding my varchar data is being truncated to 255 characters. Any help on this would be appreciated.

Any body know of a good type 4 jdbc driver for SQL
Server 7. There is one for SQL server 2000
downloadable from micrsoft site, but does it work for
sql server 7 too ?Older betas of this driver suported SQL Server 7, but I believe the plan is to specifically remove that capability in its final release.
My biased opinion would be to try the driver from DataDirect. http://www.ddtek.com Its their driver (an older version) that Microsoft has licensed for MS SQl 2000.
Getting it from DataDirect has a couple obvious advantages:
1. Its a later, more stable, better performing version
2. It will continue to Support MS SQL 7
3. It's suported by 24/7 phone,email and web tech support.
4. And, early this week, you should be able to get the latest 3.0 release which promises to be even more robust, in addition to conforming to the new specs.
5. its not free, but then again- you get what you pay for...

Similar Messages

Is it possible to use Jdeveloper with Other Sql Server using JDBC-ODBC bri

I have been able to successfully establish connection with Sql server Using JDBC-ODBC bridge, but when i run the application and perform some operations such as insert the following errors occur:
(oracle.jbo.SQLStmtException) JBO-27122: SQL error during statement preparation. Statement: SELECT ItmUnit.ORG_CODE, ItmUnit.UNIT_CODE, ItmUnit.UNIT_NAME, ItmUnit.ADDRESS1, ItmUnit.ADDRESS2, ItmUnit.ADDRESS3, ItmUnit.CITY_CODE, ItmUnit.USER_ID, ItmUnit.TIME_STAMP FROM ITM_UNIT ItmUnit
----- LEVEL 1: DETAIL 0 -----
(java.sql.SQLException) [DataDirect][ODBC Sybase Wire Protocol driver]Sybase does not allow more than one active statement when retrieving results without a cursor
(oracle.jbo.DMLException) JBO-26041: Failed to post data to database during "Insert": SQL Statement "INSERT INTO IMMS.HRM_UNIT(UNIT_CODE,UNIT_NAME) VALUES (?,?)".
----- LEVEL 1: DETAIL 0 -----
(java.sql.SQLException) [Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt
(oracle.jbo.AttrValException) JBO-27014: Attribute DeptCode in HrmUnitDept is required
(oracle.jbo.SQLStmtException) JBO-27122: SQL error during statement preparation. Statement: SELECT HrmUnit.UNIT_CODE, HrmUnit.UNIT_NAME FROM IMMS.HRM_UNIT HrmUnit
----- LEVEL 1: DETAIL 0 -----
(java.sql.SQLException) [Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt

Yes, you can do that. For testing purposes you can also create simple files (with mkfile) and add these to ASM. That way you could also experiment with deleting files and see what happens in ASM
Bjoern

Weblogic server using jdbc-odbc bridge

I want to connect to database through jdbc-odbc bridge.I am using web logic server. When i creating new jdbc connection pool a error comes that driver class is not on classpath. how i rectify this problem? how I make weblogic to recognize sun.jdbc.odbc.JdbcOdbcDriver?

like any other library...
put the .jar file of the lib in the WEB-INF/lib of
your webappWrong in so many ways.
You don't add drivers to WEB-INF/lib if they're being acquired as datasources - the server needs access to the driver to create the data source. If you're not using a DataSource but materializing the connection directly, then this advice is semi-correct, but it's a crappy way to build a web app.
You don't normally add a JAR for the Sun JDBC ODBC bridge anyway as it's present by default in their J2SE implementation.
And finally, I think WebLogic doesn't use the Sun J2SE implementation anyway, so it's possible that the bridge is not available at all.
So the correct answer is: Don't use the bridge driver. Acquire a driver for your specific database and use that. And make sure that it's available to the application server. If you absolutely must use the bridge driver, you're going to have to use the Sun J2SE implementation to run WebLogic - and I think you'll have to consult the WebLogic site for help with that.

Database package for handling SQL queries using JDBC/ODBC bridge

I perform a package using J2ME which can stores the contact.It consisting of the fascilities of the editing,Inserting, Deleting,Updating records
i have write import statements as
import javax.microedition.midlet*;
import javax.microedition.lcdui.*;
but when i write import java.sql.* error message shown AS this package does not exist.
So for J2ME using J2ME wireless toolkit 2.5 cldc which package i want to import to implement the sql statements i implement the Database using the text Files.
Requirement is that all SQL statements are implemented.also Which other equivalent packages are there for handling the databases in J2ME.
Please tell me all the package & Answer of the above problem.

Hey
I was told that I can (through Java code) read all the registered DSNs and that way basically modify my application to populate it with a list of databases in the system and then when the user clicks on a database, the program would function as before...i.e. read the list of tables with it..yadda yadda yadda
Can anyone guide me on how to do that? read a list of DSNs in the system etc

JDBC-ODBC-Bridge connection to SQL Database

Hi guys
I have a problem. I've made a little game which I want to put on my website. It has a highscore-list which I want to connect to my web host's database server to get the current list.
I tried this with JDBC and got it to work locally but when I uploaded it to my site it didn't work. I contacted my web host's technical support who told me that their server didn't have the JDBC driver and that I should use ODBC instead. I did lots of reading and found out about this JDBC-ODBC-Bridge. I have since been trying to implement this into my program but hasn't been successful.
In my original JDBC connection I used
private String url = "jdbc:mysql://" + host + "/" + mydatabase;
Class.forName("com.mysql.jdbc.Driver");
Connection connection = DriverManager.getConnection(url, username, password);Now I'm trying
private String url = "jdbc:odbc://" + host + "/" + database;
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection connection = DriverManager.getConnection(url, username, password);But, at least when trying it locally, I get the error
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name is too long.
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6957)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7114)
at sun.jdbc.odbc.JdbcOdbc.SQLDriverConnect(JdbcOdbc.java:3073)
at sun.jdbc.odbc.JdbcOdbcConnection.initialize(JdbcOdbcConnection.java:323)
at sun.jdbc.odbc.JdbcOdbcDriver.connect(JdbcOdbcDriver.java:174)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at HighscoreDB.readFile(HighscoreDB.java:53)
at HighscoreDB.displayList(HighscoreDB.java:97)
at HighscoreDB.main(HighscoreDB.java:33)Please help ;)
Edited by: YZF-R1 on 2009-apr-09 13:26

YZF-R1 wrote:
masijade. wrote:
Do you know what ODBC is?I think I at least have the basic idea, I learnt most of what I know from this post:
[http://forums.sun.com/thread.jspa?threadID=211735&start=2&forumID=48]
masijade. wrote:
While "reading about this JDBC-ODBC Driver" did you also read about how to enter the URLs for it?No, I couldn't find that piece of information, why don't you tell me ;)
Here
>
masijade. wrote:
Did also read about the fact about needing to configure ODBC DSNs? Or about the fact that the connection URL is radically different if you don't configure one?No I did not. Please explain =)
Here
>
PhHein wrote:
Plus, JDBC-ODBC Bridges are evil!I'm beginning to realize this myself :O:(
BalusC wrote:
Drop that whole ODBC idea and just gently read the documentation which come along with the MySQL JDBC driver.I read a lot of it when I used the JDBC driver locally but how's that going to help me if the server doesn't have the JDBC driver installed?How will the Bridge help you if the ODBC Driver is not installed? And, the JDBC Driver (the Type 4.0 ones, which the MySQL Driver is) is 100% Java, so it can even be included in an Applet, if the HTML page that accesses it is done right, and the jars are "packaged" properly.

SQL Developer 2.1.1 : JDBC/ODBC Bridge

Hi, I am running SQL Developer 2.1.1 and would like to to access databases other than those formally supported.
I am happy to use the JDBC/ODBC Bridge - although additional JDBC connectivity would be ideal, I gather that it is not supported.
Googling, and searching on this forum, implies that I should install the appropriate JDBC driver for the Bridge, list it on the third party JDBC drivers Preferences page, and that a 'Create Connection' dialog JDBC tab would then appear on restarting SQL Developer, as happens when you install the supported MySQL JDBC driver, for example.
I am sorry to be dim, but I cannot track down a jar file containing the JDBC/ODBC Bridge that is supported by SQL Developer to the extent of enabling the JDBC tab. The rt.jar shipped in SQL Developer's JRE does not do the job. Checking for updates from the Help menu lists nothing that looks even remotely relevant. Where should I be looking?
Thanks a lot
Mandy Shaw
Edited by: 845622 on Mar 18, 2011 10:59 AM - Clarified - sorry

The additional connection types only appear for supported databases.
I haven't tried this, but I vaguely remember some discussions from a long time ago.
Make sure the jar file (and any supporting DLLs) are on your classpath (probably dropping them in the extensions directory will do it) and then in the new connection dialog select 'Advanced' connection type. This lets you enter a JDBC URL in any format so you can enter what is required for your additional databases.
If this works, the most it will get you is a SQL Worksheet with no completion insight or syntax checking. Because SQL Developer doesn't know how to use the database catalogue, the object navigator won't work.

Java Web Analyzer security hole in SQL Query Spreadsheet using JDBC-ODBC bridge

Hi, I use Hyperion Analyzer 7.0.1 on Windows 2003 and relation database DB2 v8.2. I did: 1. log in to Java Web Analyzer 2. button New 3. Select Layout: Custom Report 4. from toolbar pull down to desktop "SQL Spreadsheet" option 5. "Enter SQL Query" window opens, from JDBC Driver drop down window select "JDBC-ODBC Bridge" 6. in "JDBC Connection String" window replace "db1" string with database name 7. leave JDBC Username and JDBC Password empty (this is default) 8. click on "Test Connection" button. 9. "Test Connection" window opens with message "Connection Succeded"!!! So connection to database without password succeeded. 10. in "SQL Query window" write any SQL you wish and Database will execute the SQL. Conclusion: Connecting Analyzer with SQL Spreadsheet option to relation database DB2 is possible without password. Question: Is there any way to prevent users from executing "SQL Spreedsheet" option? Thanks, Grofaty

try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection(dsn,"guest","guest");
OR DriverManager.getConnection(dsn);
System.out.println("Conection's opened");
catch(ClassNotFoundException cnfe)
System.err.println(cnfe);
catch(SQLException sqle)
System.err.println(sqle);
try that code and double check you DSN Name . it's a good practice to greate a system DSN.
i hope that helps.
FEEL FREE TO ASK. WON'T BITE U
ABDUL

JDBC-ODBC Bridge to SPSS data files - Result Set Type is not supported

Hello,
As mentioned in the subject I am trying to read SPSS data files using the SPSS 32-Bit data driver, ODBC and the JDBC-ODBC Bridge.
Using this SPSS Driver I manged to read the data directly into an MS-SQL Server using:
SELECT [...] FROM
OPENROWSET(''MSDASQL.1'',''DRIVER={SPSS 32-BIT Data Driver (*.sav)};DBQ=' SomePathWhereTheFilesAre';SERVER=NotTheServer'', ''SELECT 'SomeSPSSColumn' FROM "'SomeSPSSFileNameWithoutExt'"'') AS a
This works fine!
Using Access and an ODBC System DNS works for IMPORTING but NOT for LINKING.
It is even possible to read the data using the very slow SPSS API.
However, when it comes to JDBC-ODBC the below code does only work in part. The driver is loaded successfully, but when it comes to transferring data into the resultset object the error
SQLState: null
Result Set Type is not supported
Vendor: 0
occurs.
The official answer from SPSS is to use .Net or to use their implementation with Python in their new version 14.0. But this is obviously not an option when you want to use only Java.
Does anybody have experience with SPSS and JDBC-ODBC??? I have tried the possible ResultSet Types, which I took from:
http://publib.boulder.ibm.com/infocenter/db2luw/v8/index.jsp?topic=/com.ibm.db2.udb.doc/ad/rjvdsprp.htm
and none of them worked.
Thank you in advance for your ideas and input & stay happy!
Here the code without all the rest of the class arround it:
// Module: SimpleSelect.java
// Description: Test program for ODBC API interface. This java application
// will connect to a JDBC driver, issue a select statement
// and display all result columns and rows
// Product: JDBC to ODBC Bridge
// Author: Karl Moss
// Date: February, 1996
// Copyright: 1990-1996 INTERSOLV, Inc.
// This software contains confidential and proprietary
// information of INTERSOLV, Inc.
public static void main1() {
String url   = "jdbc:odbc:SomeSystemDNS";
String query = "SELECT SomeSPSSColumn FROM 'SomeSPSSFileName'";
try {
    // Load the jdbc-odbc bridge driver
    Class.forName ("sun.jdbc.odbc.JdbcOdbcDriver");
    DriverManager.setLogStream(System.out);
    // Attempt to connect to a driver. Each one
    // of the registered drivers will be loaded until
    // one is found that can process this URL
    Connection con = DriverManager.getConnection (url);
    // If we were unable to connect, an exception
    // would have been thrown. So, if we get here,
    // we are successfully connected to the URL
    // Check for, and display and warnings generated
    // by the connect.
    checkForWarning (con.getWarnings ());
    // Get the DatabaseMetaData object and display
    // some information about the connection
    DatabaseMetaData dma = con.getMetaData ();
    System.out.println("\nConnected to " + dma.getURL());
    System.out.println("Driver       " +
      dma.getDriverName());
    System.out.println("Version      " +
      dma.getDriverVersion());
    System.out.println("");
    // Create a Statement object so we can submit
    // SQL statements to the driver
    Statement stmt = con.createStatement(ResultSet.TYPE_FORWARD_ONLY ,ResultSet.CONCUR_READ_ONLY);
    // Submit a query, creating a ResultSet object
    ResultSet rs = stmt.executeQuery (query);
    // Display all columns and rows from the result set
    dispResultSet (rs);
    // Close the result set
    rs.close();
    // Close the statement
    stmt.close();
    // Close the connection
    con.close();
}

Thank you for your reply StuDerby!
Actually the above script was before, as you suggested, leaving the ResultSetTeype default. This did not work...
I am getting gray hair with SPSS - in terms of connectivity and "integratebility" none of their solutions offered is sufficient from my point of view.
Variable definitions can only be read by the slow API, data can only be read by Python or Microsoft Products... and if you want to combine both you are in big trouble. I can only assume that this is a company strategy to sell their Dimensions Platform to companies versus having companies developping their applications according to business needs.
Thanks again for any furthur suggestions and I hope, that some SPSS Developper will see this post!
Cheers!!

About JDBC ODBC bridge

I'm developing an application using EJBs in a development environment with Sun Application Server, Sql Server and NetBeans IDE 4.1. I'm using entity beans and session beans in my application. But, when I try to connect to database using a Servlet or JSP with the session beans, the connection with database could not be established. This is my problem!!!

First, you probably shouldn't use the JDBC/ODBC bridge. Any serious and many non-serious databases have real drivers. Is there anything but Access that really needs the bridge...? Use the jTds driver (google for it). Or just last week Microsoft beta'ed a new JDBC driver for MSSQL; no idea how good it is. Some smalltalk on that: http://www.theserverside.com/news/thread.tss?thread_id=35063
Second, what error do you get?
If it is "connection refused", here is my standard first aid check list:
- Check host name in connect string.
- Check port number in connect string.
- Try numeric IP address of server host in connect string, in case name server is hosed.
- Are there any firewalls between client and server blocking the port.
- Check that the db server is running.
- Check that the db server is listening to the port. On the server, try: "telnet localhost the-port-number". Or "netstat -an", there should be a listening entry for the port.
- Try "telnet serverhost the-port-number" from the client, to see if firewalls are blocking it.
- If "telnet" fails: try it with the numeric ip address.
- If "telnet" fails: does it fail immediately or after an obvious timeout? How long is the timeout?
- Does the server respond to "ping serverhost" or "telnet serverhost" or "ssh serverhost"?

Access MS-Access using JDBC ODBC bridge from Sun AMD64

Hi,
We are trying to configure a communication channel using the JDBC adapter. We are setting the driver to the JDBC-ODBC bridge driver and trying to access an MS Acess database from the PI server(sun amd64). When we set the driver to the JDBC-ODBC bridge, the J2EE engine tries to restart immediately and does not start. The std_server.out contains the following error:
Service com.sap.aii.adapter.jdbc.svc started. (234 ms).
1016 sun.io.CharToByteASCII::convert (370 bytes)
1017 ! com.sap.sql.jdbc.common.CommonPreparedStatement::close (119
bytes)
ld.so.1: jlaunch: fatal: relocation error:
file /usr/j2se/jre/lib/amd64/libJdbcO
dbc.so: symbol SQLAllocEnv: referenced symbol not found
Has anybody been able to configure the JDBC-ODBC bridge driver for MS Access? Also, has anybody used the database vendor(MS) drivers? If so, where are they available.
Thanks in advance
Vipin

Hi
Please go through below links that would be helpful to you
SAP Network Blog: Connecting to MS Access using receiver JDBC Adapter (Without DSN)
/people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
If required Try the following driver. I havent used it but its available.
HXTT Access is such a type 4 driver at http://www.hxtt.net/en/software/access/document.html .
Thanks
Swarup

JDBC ODBC bridge connections using 2.1.1

Hi,
I have reviewed a lot of postings related to JDBC and third party drivers and understand how to connect to the packaged drivers such as MySQL and MS SQL Server/Sybase. Where I'm stuck is the reference in the Connections help to JDBC. We have a ODBC system DSN that's not part of the existing JDBC drivers. The help implies it's possible to create a JDBC:ODBC bridge connection and that JDBC:ODBC bridge functionality is part of the JDK therefore should not require additional jar files. However, the JDBC tab is not an available connection type by default. I traced the JDBC ODBC bridge to the rt.jar and tried adding that to the third party extensions but that has not resulted in the JDBC tab becoming available.
Is the JDBC tab only available when using commercial JDBC ODBC bridge drivers ?
For all other connections (DB2, TimesTen, Teradata etc) the help is very specific about which jar files you need and any other requirements but the JDBC section it is unclear how you enable JDBC connectivity.
Thanks
Steven
Edited by: slisint on 14-Jan-2011 18:07

We are using the JDBC-ODBC bridge to do a prepared
statement. I have seen other bugs that suggest this
is problematic with older version of JRE, but was
supposedly fixed in later versions.
java.sql.SQLException: General errorIf it is not too late, check the following link:
http://java.sun.com/j2se/1.3/docs/guide/jdbc/getstart/GettingStartedTOC.fm.html
Sections 6.1.3 and 8 (especially tables at the end).
I had the same case, and the problem was that the field in the Oracle database was defined as NUMBER(4), witch is equivalent to INTEGER in JDBC types, and function setInt should be used with INTEGER, instead of setLong.
This is explained in sections I mentioned.

JDBC-ODBC BRIDGE (General error)

I get some time "SQLException : general error" on the screen followed by a "[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]General network error. Check your network documentation" when i am using the jdbc-odbc bridge on a jsp page
My configuration:
OS : WIN NT 4.0
TOMCAT 4.0
JSP
Database : SQL server 2000
Database driver: Sun JDBC-ODBC bridge
Could it come from a concurrent access problem?
Does anyone have an idea?
Thank you,
Deenesh

I've found that the descriptive "General Error" message ususally means there's something wrong with my sql. If your db passes Navin's test (meaning it's up and running), then try to take your sql query and paste it into a sql window for your db. Sometimes this gets you an error message that is a little more descriptive.

Jdbc-odbc bridge connection error

Hi,
Please help me to create a jdbc-odbc connection from Jdev10g to a TSM server database.
I have created a database connection with the following parameters:
Connection name: tsm1a
Connection type: jdbc-odbc bridge
Username: admin
Password: ***
Datasource name: tsm1 (this is the name of the DSN datasource name in my Windows ODBC DSN datasource)
Extra parameters: NONE
Clicking on the Test button shows Success!
I have tried to launch the SQL worksheet, it is success and give me a correct result to my "select * from volumes" query.
I have created a simple JSP page:
<%@ page contentType="text/html;charset=windows-1250"%>
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/ojsp/sqltaglib.tld"
prefix="database"%>
<html>
<body>
<database:dbOpen connId="c1" URL="jdbc:odbc:TSM1a" user="admin" password="***">
<database:dbQuery connId="c1" output="html" queryId="q1" >
select * from volumes
</database:dbQuery>
</database:dbOpen>
</body>
</html>
The result of the run of it:
javax.servlet.jsp.JspTagException: Failed to establish connection at oracle.jsp.dbutil.tagext.dbOpenTag.doStartTag(dbOpenTag.java:115)
Please help me, how to get a connection to the ODBC datasource from a jsp page.
What is wrong in the URL string or elsewhere ?
Thanks a lot in advance:
Arpad

Hi,
Please help me to create a jdbc-odbc connection from Jdev10g to a TSM server database.
I have created a database connection with the following parameters:
Connection name: tsm1a
Connection type: jdbc-odbc bridge
Username: admin
Password: ***
Datasource name: tsm1 (this is the name of the DSN datasource name in my Windows ODBC DSN datasource)
Extra parameters: NONE
Clicking on the Test button shows Success!
I have tried to launch the SQL worksheet, it is success and give me a correct result to my "select * from volumes" query.
I have created a simple JSP page:
<%@ page contentType="text/html;charset=windows-1250"%>
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/ojsp/sqltaglib.tld"
prefix="database"%>
<html>
<body>
<database:dbOpen connId="c1" URL="jdbc:odbc:TSM1a" user="admin" password="***">
<database:dbQuery connId="c1" output="html" queryId="q1" >
select * from volumes
</database:dbQuery>
</database:dbOpen>
</body>
</html>
The result of the run of it:
javax.servlet.jsp.JspTagException: Failed to establish connection at oracle.jsp.dbutil.tagext.dbOpenTag.doStartTag(dbOpenTag.java:115)
Please help me, how to get a connection to the ODBC datasource from a jsp page.
What is wrong in the URL string or elsewhere ?
Thanks a lot in advance:
Arpad

Microsoft SQL Server 7 JDBC Driver

Anyone know where I can download a good JDBC driver for Microsoft SQL Server 7. Thanks.

Maybe just use Sun's JDBC-ODBC bridge?That driver should not be used in production code, it is a reference implemenation only. Look here instead:
http://servlet.java.sun.com/products/jdbc/drivers

To run a report from command line, when using jdbc-odbc bridge

Hi,
How to run a report from command line, when using jdbc-odbc bridge?
Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
Please specify, what is command line arguments for jdbc-odbc bridge driver?
Environment : Oracle 9i Report Builder on WinNT
Database : Sybase
Regards,
Ramanan

Hello Ramanan,
Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
JDBC PDS allows user to connect one or more same or different kind of databases.
While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
rwrun eg :
rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
Server eg :
http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
http :
Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
With Regards
Reports Team

MS SQL Server 7 thru JDBC:ODBC bridge

Similar Messages

Maybe you are looking for