MS SQL Server with Cursor Problem
Dear all:I use JDBC type four connect with MS SQL Server and the language is jsp.
I run it on my local computer is ok.If I run it on the other computer.I get this error messege.
javax.servlet.ServletException: [Microsoft][SQLServer 2000 Driver for JDBC]Error setting up static cursor cache.
If someone get some or can surve this qusition.
Please tell me.thinks you kind.
Jamie,
Did you ever get a reply from anyone regarding this problem. I too am having a similar problem and would like to know the solution.
Similar Messages
-
Which version of SQL Server with BIDS is recommended for a starter? I keep on running in various problems when installing and uninstalling.
SQL Server 2014 is the latest SQL version and from SQL 2012, BIDS is replaced with SSDT(sql server data tools). refer: https://msdn.microsoft.com/library/cc645993.aspx?f=255&MSPPError=-2147217396
Express edition does not have this. but SQL 2014 'Express with advanced services' edition has it. i do not think full functionality is available though.
if you only want BIDS, you can install SQL 2008R2 express with advanced services edition. google for the link
this link is for SQL 2008 http://www.microsoft.com/en-us/download/details.aspx?id=1842
if this is for learning purpose, i would recommend installing sql 2014 enterprise evaluation edition. that way you can get full exposure to SQL product suite
Hope it Helps!! -
Hi everyone,
I am new to SQL server....I am learning C# programming using visual studio 2013 . And I want to learn SQL database language to create and practice C# database project....My computer meets all the hardware requirement for SQL installation (i.e. My computer
has window 7 OS , 80 GB freen HD and 6 GB RAM. ) Therefore I download Microsoft SQL server express 2012 try to install it in my computer (which already has visual studio).
But during installation of SQL server I have problem ...it says
the server doesn't respond in timely fashion. When I research about it everyone were saying uninstall sql and reinstall again. I uninstall and re install but still having same problem...
The database engine also not installed displaying same error.
I don't know how can i install sql server 2012 to use with visual studio in same computer.
Can somebody please help with SQL installation please ?
It will be great help.
Many thanks in advance
regards
rashHi
my summary file is :
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2146232832
Start time: 2015-04-06 11:34:18
End time: 2015-04-06 19:04:46
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for IS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for AS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: RASHA-VAIO
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services 1033
Express Edition 10.1.2531.0 No
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication 1033
Express Edition 10.1.2531.0 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: E:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: RASHA-VAIO\RASHA
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: MAIN
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: RASHA-VAIO\RASHA
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RASHA-VAIO\RASHA
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Integration Services
Component error code: 0x84BB0001
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Data Quality Client
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Reporting Services
Component error code: 0x84BB0001
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Analysis Services
Component error code: 0x80131600
Error description: The service could not be started. Reason: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0x88A466B0%400x857354B0&EvtType=0x88A466B0%400x857354B0
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\SystemConfigurationCheck_Report.htm
I hope it will help you to figure out ...i dont know how to solve this issue ..i have un install and re install more than 5 times.
thank you -
SCCM central site and primary site use the same SQL SERVER with two Instance.
Hi Guys,
I want deploy SCCM 2012 central site and primary site in my domain. But Only one Sql server for me. Any one can tell me how to install the central site server and primary site server with the same SQL SERVER with two instance.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Sean Xiao
TechNet Community SupportAlthough you can install like the configuration you said above, we do not recommend you do it this way. If your SQL box has problems, all the data will go away and you will not have data redundancy.
You need to configure the different SQL Port and SQL Broke service port e.g.
SQL port 4023 SQL Broke Service port 4022 for CAS instance
SQL port 4024 SQL Broke Service port 4021 for PRI instance
Juke Chou
TechNet Community Support
I agree with Johan and this configuration should not be used. But I want to clarify that the default ports for "SQL port" (actually, SQL over TCP) is 1433 and the SQL Broker Service uses 4022. The configuration above should work but the "correct" would be
to use 1433 and 4022 for the CAS and 10434 and 4023 for the Primary :)
You can read more about Network Ports used by Configuration Manager here
http://technet.microsoft.com/en-us/library/hh427328.aspx#BKMK_CommunicationPorts
/Tim
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa -
Sql server with multiple instance
hi All,
i want to install sql server with two instance and i want to assign two separate is ips for both default instance and named instance and both should work like
two different server
note: If i logged with one ip(default instance) it should show its own databases not both or named instance databases
thanks
chintalaHi chintala,
According to your description, if you want to assign the two different IP to stand for default instance
and named instance, I recommend you set up aliases on a SQL Server with multiple instances. For example, a physical server is named WinServer and 2 instances of SQL Server named WinServer and WinServer\instance1.
We need to add 1 IP addresse to the WinServer, there is one IP address already assigned to WinServer, 192.168.1.1, by adding one new IP's, 192.168.1.2 .
We need to move into DNS to configure our host names and aliases. The physical machine must be steup as a static IP in DNS. SQLAlias1, which point to the default instance on WinServer, will be setup as a DNS with an address of 192.168.1.1.
SQLAlias2, which will point to WinServer\Instance1, will be setup as a new Host (A) record in DNS with an address of 192.168.1.2.
When everything has been completed on the DNS side, you need to open up SQL Server Configuration Manager on WinServer and configure the protocols for each instance one at a time, restart the 3 SQL services.
For more information about how to set up aliases on a SQL Server with multiple instances, you can review the similar article.
http://kevine323.blogspot.com/2013/08/setting-up-aliases-on-sql-server-with.html
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Oracle equivalent for MS Sql Server WITH(NOLOCK)
Hi all :-)
What is the equivalent of MS Sql Server WITH(NOLOCK)
hint in Oracle ... or ... how can I achieve the same
effect in Oracle SELECT queries ?= dirty read .
to the op : read the concepts guide before going further; Oracle implements a different concurrency model than SQL Server -
Hi Oracle Gurus!
Currently, I am designing an ETL solution that transforms and loads a lot of data from flat files and sends it to an SQL Server 2008 R2 database for storage. However, at a future point of time, it may be decided to add or even replace SQL Server with an Oracle 11g database.
Currently, I am writing script transforms in C# to dynamically generate SSIS packages to tansform and load the data into SQL Server. But considering that in future, an Oracle 11g or 12c database might be added to, or replace the SQL Server database, how do I make my script transforms (or whatever else I am developing currently for SQL Server) reusable to the extent possible?
Or more precisely, what steps do I take, from an Oracle point of view, to ensure that any future migration of data to an Oracle database would be smooth to the extent possible?
Looking up to my Oracle Gurus for enlightenment in this matter!
Novice KidWhen you're writing your on C# code to load data into the SQL Server you have to modify the routines so that they will work with Oracle.
One approach is to use the extproc agent which would allow you to directly call external programs with all the logic in it to perform the load of your files and to put the data into the Oracle database. Another option would be to use utl_file package (or equivalents) which will allow you to open external files from your Oracle database and to directly read its content and then to pass it to the related tables. -
How to connect MS-sql server with SAP BW
hi all,
i want the connection procedure to how to connect MS-sql server with SAP BW.so that i can extract the data from ms sql server and can create cubes using that data.please help me in this issue.Hi Vamshi,
Go through this DOC it explains u how to connect to other data bases like SQL...
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff]
this is a thread related to connect the SQL server..
[DB Connect MS SQL Server;
Regards,
NR
Assign points if helpful... -
Deploy sql server with scvmm 2012 r2
Hello,
How to deploy SQL Server with scvmm such a way that I get a VM with OS+ SQL installed.
Is there way that i will get installed SQL with all feature to create new VM.
I have followed the steps as given links http://blog.islamgomaa.com/?p=236
I worked but when i have create a VM , still I need to installed SQL management Stdio manually for create DBs.MSFT has also built SQL Server Service Templates that will do this for you - you download the template, add your OS disk, add the SQL install media and go.
Here is how to get the MSFT built templates:
http://blogs.technet.com/b/scvmm/archive/2013/11/04/using-the-service-models-web-platform-installer-gallery.aspx
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will. -
SSRS 2012, SQL Server 2012. Problem with changing database
Hi all!
I have a problem with changing database for SSRS.
I have a SSRS 2012 and SQL Server 2012. These programs is on WIndows Server 2012.
I need to link SSRS to the new database instance. For this I run SSRS Configeration Manager, open tab Database, click Change Database. Then I choose option "Choose an existing report server database", click Next, write the server name, test
connection (it's successed) and push Next again. Then I see this error message:
Error
The feature: "Using other editions of SQL Server for report data sources and/or the report server database" is not supported in this edition of Reporting Services.
OK
I'm confused, cause I have compatible versions of programs and THIS error.
Please, help me.
Thanks.Hi Kirill,
From the error message, we can know that the issue may be caused by incorrect editions of SQL Server for report data sources are used as the Report Server Database.
When creating a report server database, please be aware that not all editions of SQL Server can be used to host the database. So we should make sure that we have used the correct database as the
Report Server Database. For more details, please refer to the “Report Server Database Server Edition Requirements” section in the following document:
http://technet.microsoft.com/en-us/library/cc645993.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
OGG-00868 SQL Server 2008 has problem with ODBC in the EXTRACT process
Hello Everyone
I want to replicate tables between MS SQLServer 2008 and Oracle 10g
I have Windows XP / MS SQLServer 2008 and Oracle Database 10g R 10.2.0.1.0 running on Red Hat Linux
I followed the steps from the white paper (http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html)
and Installed Oracle Golden Gate Version 11.2.1.0.1 (for Linux) and the Version 11.2.1.0.1 32bits (for Windows XP)
I followed all steps of the white paper without problem and I could do the initial load in
the Oracle Database from SQL Server sucessfully.
But when I tried to set and start the Extract process from SQL SERVER
a error was generated in the file c:\gg\dirrpt\MSEXT.rpt and the process is ABENDING
GGSCI > info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED MSEXT 00:00:00 03:22:29
2013-08-25 11:59:41 ERROR OGG-00868 Executing statement for select operation Database error 213 ([Microsoft][SQL Server Native Client 10.0][SQL Server]Column name or number of supplied values does not match table definition.
[Microsoft][SQL Server Native Client 10.0][SQL Server]DBCC execution completed. If DBCC printed error messages, contact your system administrator.
[Microsoft][SQL Server Native Client 10.0][SQL Server]Column name or number of supplied values does not match table definition.
[Microsoft][SQL Server Native Client 10.0][SQL Server]DBCC execution completed. If DBCC printed error messag).
2013-08-25 11:59:41 ERROR OGG-01668 PROCESS ABENDING.
If somebody has a clue or faced something similar please let me how could solve it.
Thanks
JuanHello mb_ogg,
Yes, I had created a Data Source HR Driver= SQL Server (second Tab System DSN) and I also had tried with
the driver SQL Server Native Client 10.0 but I faced the same error.
The database by default is EMP
Below is my configuration
Microsoft SQL Server ODBC Driver Version 03.85.1117
Data Source Name: HR
Data Source Description:
Server: JUAN-XP
Database: EMP
Language: (Default)
Translate Character Data: Yes
Log Long Running Queries: No
Log Driver Statistics: No
Use Integrated Security: Yes
Use Regional Settings: No
Prepared Statements Option: Drop temporary procedures on disconnect
Use Failover Server: No
Use ANSI Quoted Identifiers: Yes
Use ANSI Null, Paddings and Warnings: Yes
Data Encryption: No
I also clicked on the button "Test Data Source" with the below messages:
Microsoft SQL Server ODBC Driver Version 03.85.1117
Running connectivity tests...
Attempting connection
Connection established
Verifying option settings
Disconnecting from server
TESTS COMPLETED SUCCESSFULLY!
Then I went to Database Properties (Right Click) /Oprtion and Recovery model field has Full value
I also made a Backup (Backup Type = Full)
The Backups was made to Disk: C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Backup\EMP.bak
Today I repeated the same steps and I got the same error (I Copied at the end):
I also have the follow question:
Is necessary define the location of the backup of MS SQL Server to say to GG where it can get it?
GSCI (juan-xp) 1> DBLOGIN SOURCEDB HR
2013-08-27 21:16:32 INFO OGG-03036 Database character set identified as win
dows-1252. Locale: en_US.
2013-08-27 21:16:32 INFO OGG-03037 Session character set identified as wind
ows-1252.
Successfully logged into database.
GGSCI (juan-xp) 3> ADD TRANDATA HRSCHEMA.EMP
Logging of supplemental log data is enabled for table hrschema.emp
GGSCI (juan-xp) 4> EDIT PARAMS DEFGEN
GGSCI (juan-xp) 5> exit
C:\gg>defgen paramfile c:\gg\dirprm\defgen.prm
Oracle GoldenGate Table Definition Generator for SQL Server
Version 11.2.1.0.2 OGGCORE_11.2.1.0.2T3_PLATFORMS_120724.2205
Windows (optimized), Microsoft SQL Server on Jul 25 2012 03:37:58
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-08-27 21:18:23
Operating System Version:
Microsoft Windows XP Professional, on x86
Version 5.1 (Build 2600: Service Pack 2)
Process id: 3236
** Running with the following parameters **
defsfile c:\gg\dirdef\emp.def
Source Context :
SourceModule : [defgen.main]
SourceID : [defgen/defgen.c]
SourceFunction : [create_defgen_file]
SourceLine : [808]
2013-08-27 21:18:23 ERROR OGG-00037 DEFSFILE file c:\gg\dirdef\emp.def alrea
dy exists.
2013-08-27 21:18:23 ERROR OGG-01668 PROCESS ABENDING.
C:\gg>defgen paramfile c:\gg\dirprm\defgen.prm
Oracle GoldenGate Table Definition Generator for SQL Server
Version 11.2.1.0.2 OGGCORE_11.2.1.0.2T3_PLATFORMS_120724.2205
Windows (optimized), Microsoft SQL Server on Jul 25 2012 03:37:58
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-08-27 21:19:03
Operating System Version:
Microsoft Windows XP Professional, on x86
Version 5.1 (Build 2600: Service Pack 2)
Process id: 3312
** Running with the following parameters **
defsfile c:\gg\dirdef\emp.def
sourcedb hr
2013-08-27 21:19:05 INFO OGG-03036 Database character set identified as win
dows-1252. Locale: en_US.
2013-08-27 21:19:05 INFO OGG-03037 Session character set identified as wind
ows-1252.
table hrschema.emp;
Retrieving definition for hrschema.emp
Definitions generated for 1 table in c:\gg\dirdef\emp.def
C:\gg>ggsci
Oracle GoldenGate Command Interpreter for SQL Server
Version 11.2.1.0.2 OGGCORE_11.2.1.0.2T3_PLATFORMS_120724.2205
Windows (optimized), Microsoft SQL Server on Jul 25 2012 02:57:42
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
GGSCI (juan-xp) 1> start manager
MGR is already running.
GGSCI (juan-xp) 2> info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
GGSCI (juan-xp) 3> ADD EXTRACT MSEXT, TRANLOG, BEGIN NOW
EXTRACT added.
GGSCI (juan-xp) 4> ADD RMTTRAIL /u01/app/oracle/gg/dirdat/ms, EXTRACT MSEXT
RMTTRAIL added.
GGSCI (juan-xp) 5> EDIT MSEXT
ERROR: Invalid command.
GGSCI (juan-xp) 6> edit params msext
GGSCI (juan-xp) 7> START EXTRACT MSEXT
Sending START request to MANAGER ('GGSMGR') ...
EXTRACT MSEXT starting
GGSCI (juan-xp) 8> show all
Parameter settings:
SET SUBDIRS ON
SET DEBUG OFF
Current directory: C:\gg
Using subdirectories for all process files
Editor: notepad
Reports (.rpt) C:\gg\dirrpt
Parameters (.prm) C:\gg\dirprm
Replicat Checkpoints (.cpr) C:\gg\dirchk
Extract Checkpoints (.cpe) C:\gg\dirchk
Process Status (.pcs) C:\gg\dirpcs
SQL Scripts (.sql) C:\gg\dirsql
Database Definitions (.def) C:\gg\dirdef
GGSCI (juan-xp) 9> info all
Program Status Group Lag at Chkpt Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED MSEXT 00:00:00 00:02:34
GGSCI (juan-xp) 10> EDIT MSEXT
Report MSEXT.rpt with same error
Oracle GoldenGate Capture for SQL Server
Version 11.2.1.0.2 OGGCORE_11.2.1.0.2T3_PLATFORMS_120724.2205
Windows (optimized), Microsoft SQL Server on Jul 25 2012 03:49:54
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-08-27 21:30:26
Operating System Version:
Microsoft Windows XP Professional, on x86
Version 5.1 (Build 2600: Service Pack 2)
Process id: 2452
Description:
** Running with the following parameters **
2013-08-27 21:30:26 INFO OGG-03035 Operating system character set identified as windows-1252. Locale: en_US, LC_ALL:.
EXTRACT MSEXT
SOURCEDB HR
2013-08-27 21:30:28 INFO OGG-03036 Database character set identified as windows-1252. Locale: en_US.
2013-08-27 21:30:28 INFO OGG-03037 Session character set identified as windows-1252.
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
RMTHOST OCM, MGRPORT 7809
RMTTRAIL /u01/app/oracle/gg/dirdat/ms
TABLE HRSCHEMA.EMP;
2013-08-27 21:30:28 INFO OGG-01815 Virtual Memory Facilities for: COM
anon alloc: MapViewOfFile anon free: UnmapViewOfFile
file alloc: MapViewOfFile file free: UnmapViewOfFile
target directories:
C:\gg\dirtmp.
CACHEMGR virtual memory values (may have been adjusted)
CACHESIZE: 1G
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1.57G
CACHESIZEMAX (strict force to disk): 1.41G
Database Version:
Microsoft SQL Server
Version 10.00.1442
ODBC Version 03.52.0000
Driver Information:
SQLSRV32.DLL
Version 03.85.1117
ODBC Version 03.52
Source Context :
SourceModule : [ggvam.param]
SourceID : [../gglib/ggvam/cvamparams.cpp]
SourceFunction : [com_goldengate_vam::validateIfSqlServer]
SourceLine : [1955]
2013-08-27 21:30:28 ERROR OGG-00868 Executing statement for select operation Database error 213 ([Microsoft][ODBC SQL Server Driver][SQL Server]Column name or number of supplied values does not match table definition.
[Microsoft][ODBC SQL Server Driver][SQL Server]DBCC execution completed. If DBCC printed error messages, contact your system administrator.
[Microsoft][ODBC SQL Server Driver][SQL Server]Column name or number of supplied values does not match table definition.
[Microsoft][ODBC SQL Server Driver][SQL Server]DBCC execution completed. If DBCC printed error messages, contact your system admi).
2013-08-27 21:30:28 ERROR OGG-01668 PROCESS ABENDING.
Thanks
Juan -
Server 2008 with SQL server 2003 installation problem in SAP 8.8 in clint
Hello Sir
I want to install clint for SAP B1 8.8 and we have windows server 2008 with sql server 2005
when i install the clint i got one error in DI API installation that licence server name and port number is not available.
Please tell me the complete process to install 8.8. clint with which supporting software i have to install in clint machine.
and what things i have to check in server for installation .
Please kindly reply ASAP.
Thanks
Vaibhav KothariHi,
every question / issue you should know, is descripted in the following manual, please read it and follow the installation instruction manual:
https://websmp201.sap-ag.de/~sapidb/011000358700000150922010E.zip
Regards Steffen -
Accessing MS Sql Server with Java classes - problem connecting to socket
I found an example at this location which uses java classes to connected to MS Sql Server.
http://search400.techtarget.com/tip/1,289483,sid3_gci1065992,00.html
--bummer - it is a login location - so I will include the article
Anyway, the example is using Websphere, but I am still on Jbuilder (will get wsad soon). So I planted the classes from the example in
C:\Borland\JBuilder\jkd1.4\jre\lib\ext\...the classes
Then I copied the code from the example to my jpx project and got an error that it could not connect to the socket. The only thing I changed in the code was the connection string:
--original string from example:
Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://1433", "");
I was getting an error with the 2 argument version of DriverManager - and the second argument here was empty (properties argument). Here was my connection string:
Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://Myserver:1433;User=sa;Password=");
I am only using the 1 argument version of DriverManager. Note that the password=" is blank because my RnD workstation is standalone - no one accesses the sql server except me - so no password. I also left out the last semicolon I noticed. Any suggestions appreciated how I could fix this.
Thanks
source of article:
http://search400.techtarget.com/tip/1,289483,sid3_gci1065992,00.html
iSeries 400 Tips:
TIPS & NEWSLETTERS TOPICS SUBMIT A TIP HALL OF FAME
Search for: in All Tips All search400 Full TargetSearch with Google
PROGRAMMER
Sample code: Accessing MS SQL Server database from the iSeries
Eitan Rosenberg
09 Mar 2005
Rating: --- (out of 5)
Nowadays with the help of Java the iSeries can be integrated with other databases quite easy. This tip shows you how. The code included here uses the free Microsoft driver that can be downloaded from here. (SQL Server 2000 Driver for JDBC Service Pack 3)
If your SQL server does not include the Northwind Sample Database you can find it here.
http://www.microsoft.com/downloads/details.aspx?familyid=07287b11-0502-461a-b138-2aa54bfdc03a&displaylang=en
The download contains the following files:
msbase.jar
mssqlserver.jar
msutil.jar
Those files needs to be copied to the iSeries directories (/home/r_eitan/ExternalJARs).
Here's the directory structure (on the iSeries) for this sample:
/home/r_eitan/ExternalJARs - Microsoft files (msbase.jar,mssqlserver.jar,msutil.jar)
/home/r_eitan/JdbcTest02 - My code (Main.java,Main.class)
The Java code
import java.sql.*;
import java.io.*;
class Main {
* Connect to Microsoft SQL server and download file northWind.products as tab
* seperated file. (products.txt)
public static void main(String args[]) {
try {
PrintStream outPut = new PrintStream(new BufferedOutputStream(new FileOutputStream("products.txt")));
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
//Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://1433", "");
Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://Myserver:1433;User=sa;Password=");
System.out.println("Connection Done");
connection.setCatalog("northWind");
String sqlCmdString = "select * from products";
Statement statement = connection.createStatement();
ResultSet resultSet = statement.executeQuery(sqlCmdString);
ResultSetMetaData resultSetMetaData = resultSet.getMetaData();
int columnCount = resultSetMetaData.getColumnCount();
// Iterate throught the rows in resultSet and
// output the columns for each row.
while (resultSet.next()) {
for (int index = 1; index <=columnCount; ++index)
String value;
switch(resultSetMetaData.getColumnType(index))
case 2 :
case 3 :
value = resultSet.getString(index);
break;
default :
value = """ + resultSet.getString(index) + """;
break;
outPut.print(value + (index < columnCount ? "t" : ""));
outPut.println();
outPut.close();
resultSet.close();
connection.close();
System.out.println("Done");
catch (SQLException exception)
exception.printStackTrace();
catch (Exception exception)
exception.printStackTrace();
--------------------------------------------------------------------------------------------------My guess is that the server's host name isn't right. It necessarily (or even usually) the "windows name" of the computer. Try with the numeric IP address instead (type "ipconfig" to see it).
First aid check list for "connection refused":
- Check host name in connect string.
- Check port number in connect string.
- Try numeric IP address of server host in connect string, in case name server is hosed.
- Are there any firewalls between client and server blocking the port.
- Check that the db server is running.
- Check that the db server is listening to the port. On the server, try: "telnet localhost the-port-number". Or "netstat -an", there should be a listening entry for the port.
- Try "telnet serverhost the-port-number" from the client, to see if firewalls are blocking it.
- If "telnet" fails: try it with the numeric ip address.
- If "telnet" fails: does it fail immediately or after an obvious timeout? How long is the timeout?
- Does the server respond to "ping serverhost" or "telnet serverhost" or "ssh serverhost"? -
Trigger problem on Sql Server with linked server to Oracle
Hi All,
I have a simple insert trigger on Sql Server 2005, it uses linked server to Oracle.
like that ;
USE [YTM08]
GO
SET QUOTED_IDENTIFIER ON
GO
ANSI_NULLS ON
go
ANSI_WARNINGS ON
CEATE TRIGGER [dbo].[YTM_TBLSTSABIT_I]
ON [dbo].[TBLSTSABIT] FOR INSERT
AS
BEGIN
INSERT INTO YTM_ORACLE..SECTOR.STOCKS
stock_name,
stock_code,
insert_date
SELECT
SBT.STOCKNAME,
SBT.STOCKCODE,
GETDATE()
FROM INSERTED SBT
END
The YTM_ORACLE is a linked server and it's provider is OraOLEDB.Oracle.
Trigger does not works for that linked server but other triggers for local
sql server works fine...
I get this error from sql server
'Heterogeneous queries require the ANSI_NULLS and
ANSI_WARNINGS options to be set for the connection. This ensures consistent query semantics. Enable these options and then reissue your query.'
Does someone know how to solve this issue the right way?
Thanks in advance.
Thanks !
AdamHi Lars,
Thanks for the data. I've already read this note and configure all this parameters. But when I'm executing the Create Source System in the BI system the process dies.
If I look into the logs I see this:
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c06d007e) [dpnttool.c 432]
That's the reason why I start guessing about other possible problem.
Regards -
Help - JDBC MS SQL Server and Cursors Error
Hello,
Please help. I am using weblogic 8.1 and MS SQL Server 2000. Using JDBC. I have am calling a stored procedure which outputs a CURSOR. I haveing problems specifying the right java.sql.Type for this. I tried java.sql.Type.OTHER but it fails. The code is as follows
Connection conn = null;
CallableStatement stmt = null;
String sqlProc = "{ call GetDocumentDetails(?,?) }";
try {
conn = this.getConnection();
stmt = conn.prepareCall(sqlProc);
stmt.setInt(1, docId);
stmt.registerOutParameter(2,Types.OTHER);
stmt.execute();
ResultSet rs = (ResultSet) stmt.getObject(2);
while(rs.next()) {
The exception that I get is
java.sql.SQLException: [BEA][SQLServer JDBC Driver]The specified SQL type is not supported by this driver.
at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
PLEASE HELP.
Thanks in advance
GMhi llturro,
Thanks for answering my question. I have tried out what you suggested, but I still can't fix my problem. The following are the messages that display when I try to run my servlet. It seems that the DataSource, Connection and Statement are ok, however when it comes to the ResultSet the error message appear. What's wrong with my ResultSet coding ?
ResultSet rs = stat.executeQuery("SELECT ISBN FROM BOOKSINFO WHERE ISBN='"+primarykey+"'");
setEntityContext Method
Find by primary key
DataSource OK
Connection OK
Primary Key = 013-00-675721-9
Statement OK
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.RemoteException: Unknown Exception/Error thrown by EJB method.; nested exception is:
java.lang.NullPointerException
java.rmi.RemoteException: Unknown Exception/Error thrown by EJB method.; nested exception is:
java.lang.NullPointerException
java.lang.NullPointerException
<<no stack trace available>>
Maybe you are looking for
-
Bridge cache managment & export to folders?
What is the function and advantage of "auto exporting cache to folders" in Bridge? Round 2 testing, I changed the CS6 Bridge cache location to be the same location I was using for CS5, on a secondary drive. Small mistake, because CS6 proceeded to del
-
Hi Exports, I am facing one problem in TRIP T.code. While executing this transaction code system is saying that "Infotype P0017 could not be read". But I maintained IT 0017 with active validity period. Please guide/advise me to resolve it. Thanks & R
-
XPontus XML Editor 1.0.0.1 is out
Hi everybody, The version 1.0.0.1 of XPontus XML Editor(http://xpontus.sf.net) is out. XPontus XML Editor is a simple XML Editor oriented towards text editing. It aims to become the free alternative to commercial XML IDEs such as XML SPy or Oxygen XM
-
Pm-utils: how to use cpufreq after powersave replacement [SOLVED]
How I can load cpufreq module without powersave? I try lo load p4-clockmod.ko (this module was used by powersave) manually via rc.local, but I got the error insmod: error inserting '/lib/modules/2.6.22-ARCH/kernel/arch/i386/kernel/cpu/cpufreq/p4-cloc
-
Jdevloper 11g - Loading very slow
Initial loading of JDev 11g takes longer time. Recommended system configuration is available but still loading and execution is very slow. Even MaxPermGen error is popping up frequently. Working in ADF rich client application. Kindly provide help in