MSI i-Charger - Doesn't seem to work at all?

Hi All
I've had very little problems with my 975X Platinum Power-Up Edition motherboard, and my system is running very well, I have Windows 7 64-Bit Ultimate running on my system, and I have just bought an Apple iPad.
The iPad shows that it is Not Charging when directly connected to the motherboard with the Dock Connector cable. This is because the iPad requires 1 Amp to charge as opposed to the 500mA that the USB Ports provide. Fortunately MSI have created the i-Charger software:
http://www.msi.com/index.php?func=newsdesc&news_no=1013
This allows the 1 Amp to be delivered to the port.
I installed the software and now I have an icon in the system tray of a battery with what looks like a red light inside it, when the software starts, nothing appears except a box which immediately closes. When the iPad is connected nothing happens and "Not Charging" still appears on the iPad display.
I thought it could be a problem with Windows 7 and/or 64 bit, so I changed my hard disk to one with an Windows XP SP-3 install on it which I use now and again for testing and for software that doesn't work under Windows 7 and/or 64 bit.
Having run it under windows XP it still does the same and doesn't work.
The install files are completely different, ie two separate downloads
Any Help appreciated
Shunts...

Quote from: shuntfield on 31-May-10, 23:50:33
Thanks for your reply.
I was hoping that someone in the Forum has managed to get it to work.
I'm guessing that I won't get much assistance from the support dept regarding it.
Shunts...
The new iCharger beta version v1.0.101 fixed the compatibility issue with Apple iTunes, which caused the i-Pad can not be charged.
Please test it, thank you.

Similar Messages

I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work. Can anyone suggest what I'm doing wrong?

I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work at all. I'm currently in India. Could that be the cause or can anyone suggest any reason why this wouldn't work?

"gets stuck" - are there any error messages?
If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one.

SetDocument doesn't seem to work correctly

I'm obviously using the setDocument method for my JTextField incorrectly, but how? The DocumentSizeFilter works correctly, allowing only the number of characters I specify, but the DigitDocument.insertString(...) doesn't seem to work at all (it should allow for only digits to be entered into the JTextField).
          AbstractDocument doc;
          pafTextField = new JTextField();
          pafTextField.setDocument(new DigitDocument());
          pafTextField.setPreferredSize(new Dimension(30, height));
          doc = (AbstractDocument)pafTextField.getDocument();
          doc.setDocumentFilter(new DocumentSizeFilter(2));The DigitDocument class:
public class DigitDocument extends PlainDocument{
     public DigitDocument(){
          super();
     public void insertString(int offs, String str, AttributeSet a) throws BadLocationException, NumberFormatException{
          try{
               System.out.println("String str = " + str);
               int i = Integer.parseInt(str);
               super.insertString(offs, str, a);
          catch(NumberFormatException e){
               // do nothing because a user input was not a digit
               Toolkit.getDefaultToolkit().beep();
}the DocumentSizeFilter code:
http://java.sun.com/docs/books/tutorial/uiswing/components/example-1dot4/DocumentSizeFilter.java

didn't try the abstract doc, but why not combine the two
something like this
import java.awt.*;
import javax.swing.*;
import javax.swing.text.*;
class Testing extends JFrame
public Testing()
    setLocation(400,300);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    JTextField tf = new JTextField(new DigitDocument(2),"",10);
    JPanel p = new JPanel();
    p.add(tf);
    getContentPane().add(p);
    pack();
public static void main(String[] args){new Testing().setVisible(true);}
class DigitDocument extends PlainDocument{
int maxChars;
public DigitDocument(int chars){
    super();
    maxChars = chars;
public void insertString(int offs, String str, AttributeSet a) throws BadLocationException, NumberFormatException{
    try{
      System.out.println("String str = " + str);
      if(this.getLength()+str.length() > maxChars) throw new NumberFormatException();//<----
      int i = Integer.parseInt(str);
      super.insertString(offs, str, a);
    catch(NumberFormatException e){
      // do nothing because a user input was not a digit
      Toolkit.getDefaultToolkit().beep();
}

My iPhone 5 randomly shutdown and rebooting doesn't seem to work for me, what should I do?

It also happens when I'm charging my phone, and also the battery percentage doesn't show that correct battery level not unless I turn off and on.. I tried rebooting the phone but it doesn't seem to work for me, random shutdown still happens..

Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.

Wacom Tablet doesn't seem to work all of the time?

I have a Wacom Intuos 3 tablet, not more than a year old. I recently installed it onto my Macbook Pro and it worked fine, but when I unplugged it and came back to work with it later, it doesn't seem to work. The mouse doesn't respond to where I click on the pad.
So, I've reinstalled this a couple of times and was able to make it work perfectly, but today when I went back to work in photoshop, it doesn't seem to be responding again.
Does anyone have any tips? I know that Leopard likes you to eject USB devices instead of just pulling them out of the slot, but I don't see anywhere to eject it.
Does anyone know what's up?

Downloaded a driver from website, tablet works now.

Safari on my iPhone 6 running 8.02 doesn't seem to work right. Some Java scripts don't show correctly and they do on other browsers I have downloaded. I tried almost everything and nothing seems to work to fix it. Please help.

Some websites like the one of my college uses JavaScripts and they seem to load correctly to a certain point but then not really. For example in one it would say select an option from the left menu. And I do it hut nothing happens. But when I go to the same website in another browser on my phone. The JavaScript works completely and allows me to see whatever I was clickig on that menu. I have seen that there are other websites being affected too. I tried clearing my cookies and data. even restarted my phone. And doesn't seem to work. I don't know how change the configuration any more to make it work like normal. At first I thought it was my school's website but it never got fixed. And now I realized is my safari browser! I wanna keep using it since I am really familiar with It. If someone knows how to fix this please let me know!
Thanks

You can reset the SMC and see if that helps. If it's a unibody or Retina, follow the method for "a battery you should not remove yourself."
http://support.apple.com/kb/ht3964

I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

I'm using iphoto9.1.3 but now it doesn't seem to work, whenever I try to open it, it just shows loading, but never loads. Can anybody help me with this ?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

'erase free space' not secure - it doesn't seem to work?

Just wanted to point out that the erase free space option in Mountain Lion does not seem to work, at all.
A week ago I ran erase free space on my primary data drive then later, out of curiosity, I ran an inexpensive third party recovery program on the disk just to see what happened. Interestingly enough the recovery software was able to find and restore files that I had deleted over a year ago.
This has me thinking, so today I tried it again, only with a 7 pass erase this time. Nope, same thing. After a 7 pass erase (erase free space) this low end, less than $35 recovery software turns up tons of files, everything from stuff I just deleted a few days ago to stuff from over a year ago.
If I'm doing something wrong I would love for someone to point it out to me. Not that I'm toting state secrets or anything on my mac, but still - my privacy is important to me and I assume it is to others.
I'd encourage folks to try this out for themselves.
My set up is a 2011 macbook pro with an SSD as the boot drive, I've got a second harddrive installed in the optical bay and this is where my home folder lives. The secondary drive is the drive where I'm running erase free space.
The only thing that I can think of is that, even though the button is not greyed out, maybe I need to be booted to recovery in order to succesfully run erase free space on system drives?
Any input would be greatly appreciated, otherwise this seems like a pretty ugly security lapse on the part of Apple. Imagine if you're selling your machine and secure erasing before turnign it over to its new owner - and the new owner can run a $35 dollar recovery program and access everything on your machine.
Not good.

Thanks for your response, William.
I think that the issue may have to do with being booted to the system while trying to erase free space. I ran a 7 pass erase free space on a 1TB external Lacie drive this afternoon, the operation took a bit over 6 hours to complete and recovery sofatware is turning up nothing.
This is in contrast to the main drive, which my original post referenced, which is a 500gb 7200 rpm internal drive. A 7 pass secure erase took less than 5 minutes to complete - so, even though the drive is 1/2 the size, there's obviously something not right with the 7 minutes time to complete.
Tomorrow I'm going to try either booting to another account (which doesn't utilize this partcular disk) or booting to recovery and seeing what happens.
I have a feeling that this will solve the problem - I'll post back tomorrow evening.

Pdfmark code in MS Word 2008 doc doesn't seem to work properly to create Named Destination

Hi all,
I've been having trouble with creating Preview-compatible Named Destinations in Acrobat 9.x (see http://forums.adobe.com/thread/770470?tstart=0). Distiller, on the other hand, appears to create compatible Destinations, so as a last-ditch effort, I tried to go back to my original source file (Microsoft Word 2008 document) to use Distiller's pdfmark functionality, to see if maybe I could finally get a PDF with Preview-compatible Destinations.
Following instructions found elsewhere on this forum, I went into Word and inserted the following field into a test location in my document:
PRINT "[ /Dest /testdest /View [ /XYZ null null null ] /DEST pdfmark"
This field code is supposed to then cause a pdfmark to be inserted into the resulting PostScript and/or PDF files. Distiller is supposed to understand this and turn it into a Named Destination called "testdest." However, it doesn't seem to work - I don't see the pdfmark code in the PS file, and the PDF file doesn't have any Named Destinations in it.
I'm using Acrobat 9.x on Mac OS X 10.6.5, so I tried this two different ways:
1) Using the "Print to Adobe PDF" workflow (which replaced the "Adobe PDF Printer" from previous OS/Acrobat versions) - this automatically generates a PDF via (presumably) an API call to Distiller... and
2) Using the "Print to Postscript" workflow to generate a PS file, which I then ran through Adobe Distiller.
In neither case did I end up with a named destination in the PDF file, as I was supposed to. In case #2, even the Postscript file didn't have a pdfmark embedded in it. Thus, I'm assuming that perhaps this is particular issue may be a problem with MS Word 2008 rather than with Acrobat... but I'm hoping someone might have a clue as to how to fix it.
I welcome ideas on how to get Word 2008 to properly output pdfmark code, so that Distiller will pick it up and properly embed a Named Destination into the PDF...
Thanks in advance.
(If anyone has ideas about the Preview-compatible problem, linked above, that would also be great!)

You're suggesting that it was never fixed from Word 2004 to 2008? Possibly. I wonder if it's fixed in Word 2011? Anyone know? But is it really a Word problem, rather than a Distiller issue?
I appreciate your offer, though I do have access to Word on Windows (2003, I think), so I could try Distilling there... I only worry about formatting, since there are minor differences (e.g. font kerning, etc.) between Mac and Windows that are subtle, but sufficient to create formatting issues for very long documents (e.g. pushing figures onto the wrong pages, etc.). That would be a rather big problem.
The question remains whether this is an issue with Word or Distiller, though... and whether it's fixed in Distiller X and/or Word 2011.
Adobe, care to comment?
I'd really love to find a proper Mac solution, if one exists... it would be rather a slap to Mac users if a solution doesn't exist.

Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts. I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly i

Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts.
I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly in this view.
It's always the second search that is problematic.
I've tried typing over and all it seems to do is confine the search to the the entries that have come up for the previous search.
I've tried to use the x to clear the previous entry and then type the next search, same problem. The only way seems to be to move from "All Contacts" to "Groups". Then the searched name appears and I can return to All Contacts to see full details.
Surely three key press' are not the way it's supposed to work?
FYI
Processor 2.7 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 512 MB
Software Mac OS X Lion 10.7.3 (11D50d)
Address book Version 6.1 (1083)
MacBook Pro, Mac OS X (10.7.1), 8Mb RAM 2.7Ghz i7

AddressBook experts are here:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion#/?tagSet=1386

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

TS5183 My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore..:-( this has been playing up for some time now.

My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore.. this has been playing up for some time now. But as my wife & I had a baby 7 Months ago I have not found the time to pop in to the apple store until today (8/12/13) and they told me that they couldn't help as it's out of it's warranty by 57 days
Can antone help me? is there something i can do, apart from buying a new iphone!

Have you got Siri turned on in settings/general/restrictions?

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?

Can a use a partitioned external hard drive to create a disk image? I tried, doesn't seem to work using disk manager.

Can a use a partitioned external hard drive to create a disk image? I tried, doesn't seem to work using disk manager.

OK, it's very bad computing to use a backup disk for anything but a backup. The reason being is if/when the HD crashes you will have lost not only all your backup but the data files. While I commend you for wanting redundant backup, you really need separate EHDs for doing so. Format each EHD using Disk Utility to Mac OS Extended (Journaled) using the GUID parttition. When you connect, OS X will ask if you want to use that drive as a Time Machine backup drive, select yes and then let it backup. On the second EHD format the same way however do not use TM as a backup, this time I'd suggest an app such as SuperDuper or Carbon Copy Cloner to make a clone of the internal HD. Leave both EHDs connected and TM will backup new or changed files automatically on a hourly basis. The clone you will need to set to backup on the schedule you want. For example I have my SuperDuper EHD set to backup only changed or updated files at 2AM every day.
The advantage of a clone is that if the computers internal HD crashes you can boot from a clone and continue working, TM will not do that but it's great for keeping an archive of all files. So if you want a version of a file from many months ago, TM will help you locate and restore it.

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al

MSI i-Charger - Doesn't seem to work at all?

Similar Messages

Maybe you are looking for