MSS-Team the subbordinates are not comming for manager

Dear All,
In MSS portal For 1 employee only  not updating subordinates in teamcalendar kindly help me in this
Waiting for your responses
Regards,
Shilpa.

doesn he have any subordinats at all? If this is working for other managers then probably
the affected manager has no employees under him!

Similar Messages

  • The numbers are not registered for imessages

    How to fix " the numbers are not registered for " even though they are?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
     Cheers, Tom

  • HT203167 My movies will not download to my iPad. And I the downloads are not available for my computer. How do I cancel or get the movies to my iPad? I am on wifi and 3 g. Not happy

    My movies will not download to my iPad. And the downloads are not available for my computer. How do I cancel or get the movies to my iPad? I am on wifi and 3 g. Not happy

    Hi,
    For all people struggling with connecting their iPad to their router, constantly getting 'Incorrect Password' even though you have entered the correct one - this may be your solution as it just resolved my issue.
    In your router settings online (usually found at 198.168.1.1) change your security from WPA2 or WEP to WPA.  For my iPad it for some reason only accepts WPA but now it is running without problems.  Let me know if this helps.
    Cheers.

  • The products are not downloading for me.

    The Adobe products are not downloading for me properly.
    Help!

    Hi OriginalRokstargal
    Please refer to the following help document on "Creative Cloud AAM lists applications "Up to Date" when not installed.
    http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
    Hope this helps.
    Please let me know if you still face the problem.
    Regards,
    Sumit Singh

  • The menues are not appearing for me to work on a photo, even though the program has downloaded?

    The meues are not visable on the photoshop window to work on a photo.  I downloaded a bunch of photos to work on but all I can do is archive or rename.  How do I get to edit them? Where are the menues?  I downloaded the program and it is open.

    Most menus will be greyed out until you have an image open, but you can do that via the file menu, or using Ctrl o (Cmd o).  Does that work?

  • All the properties are not displying for the View Object

    i my one of the view Object it is only showing the properties
    Values
    Lable
    Render values
    I want to use text box (Input box )...but it is not showing in the property window
    why it is not showing the all the properties for the that view Object.
    Is it a read only view object ? if so then how to change it

    This question is confusing.
    You talk about properties, suggesting attribute properties are not showing up in the view object editor. Then you talk about a read-only view object, which suggests you talk about a running application?
    Normally a view object is updatable when it is based on an entity object and when on the entity object tab of the view object editor (the page in which you select the entity object) the updatable checkbox has been checked.
    But being updatable as such is not why attributes would not show up in a screen.
    Can you be more specific, and also tell us what JDeveloper version you are working with?
    Jan Kettenis

  • New DSO data fields are not available for transformations in the upwardflow

    Hello,
    There are data flow from
        many source DSOs -> Target DSO -> Final DSO.
    Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
    now new fields are added to the target DSO, final DSO and one of the source DSO.
    When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
    The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
    Have anyone faced such a problem?
    any solutions to this?
       - I cannot delete all the other transformations as this is too much work to do and there is no time for it.
    Regards
    Kannan

    We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

  • Numbers are not comming in Arabic style in PDF o/p

    Hi,
    Thanks alot......
    The font used in the Report is Arial
    In uifont.ali file under PDF[subset]
    Arial="arial.tty' has been added.
    Your advice helped me alot. Arabic characters are comming properly in PDF O/p. But Still the numbers are not comming in Arabic style. Instead numbers are comming in engl I have set Regional options to Arabic. I am getting Numbers in arabic style when O/P is viewed in Report builder previewer or HTMLCSS or HTML. How to get Numbers in Arabic style in PDF o/p.
    Waiting for your reply,
    -Raj
    -

    Oracle Team,
    Can't I get Arabic Native numerals in PDF o/p..? We need a solution urgently.....
    We have seen some PDF documents having Arabic native numerals. But why a PDF document generated by Oracle reports is not able to show numbers in arabic style........
    I want to know whether it is possible to get Arabic native numerals in PDF o/p generated by 9iDS report builder.
    IS anything else needs to be done apart from configuring PDF subset section in uifont.ali in this regard.
    Waiting for your reply,
    Raj

  • Numbers are not comming in Arabic stle in PDF o/p

    Hi,
    Thanks alot......
    The font used in the Report is Arial
    In uifont.ali file under PDF[subset]
    Arial="arial.tty' has been added.
    Your advice helped me alot. Arabic characters are comming properly in PDF O/p. But Still the numbers are not comming in Arabic style. Instead numbers are comming in engl I have set Regional options to Arabic. I am getting Numbers in arabic style when O/P is viewed in Report builder previewer or HTMLCSS or HTML. How to get Numbers in Arabic style in PDF o/p.
    Waiting for your reply,
    -Raj
    -

    Hi stewart,,,
    Thanks for your response.
    By saying Numbers are not comming in arabic style i mean to say that in arabic report's PDF o/p, numbers(data from database) are not in arabic native numerals. Arabic labels and character data is comming properly in arabic.
    Where as the other o/p formats like HTMLCSS and HTML(IE 6.0) are having numbers in arabic native. But for me the requirement is Arabic report's o/p when veiwed in PDF format it should be completely arabic native only. This is very urgent.
    Awaiting for your response....
    -Raj

  • Device types are not suitable for ADS documents when printing Form16

    In Form 16 , while printing the Form16 of the employee it occurs an error "Device types are not suitable for ADS documents" in the task bar.
    Regards,
    Ranga

    Can you check
    Note 1116245 - ADS Check List before sending message to SAP
    and see which of the steps are not working for you?
    Markus

  • Hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?, hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?

    hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?, hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

  • I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer. Any ideas?

    I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?

    Hello there DesertRat71,
    I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
    In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
    All the best,
    Sterling

  • I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

    I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
    I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
    Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
    Do you have any suggestions?
    Thanks, Jack

    Hi Jack, great help so far!
    Internal...
    http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
    External be sure it's Firewire & not Bus powered...
    http://eshop.macsales.com/shop/firewire/optical-drives/

  • When I external edit an aperture photo using Photoshop Elements 9 and then get out, the changes are not reflected in Aperture when I return - this used to work for me but doesn't seem to have for some time - help please?

    Have used Aperture for some time - at some point this stopped working - not sure when
    workflow:
    click photo and elect to use the external editor (Photoshop Elements 9)
    Copy of the photo is created in Aperture with the "O" badge and I am rolled out to Photoshop
    Have to change the type to 8-bit in Photoshop to start making changes
    When done and I exit I am prompted to save the photo
    On returning to Aperture however the "O" badged photo does not get updated/reflect my changes
    Other Things:
    I can find a changed photo sitting in the Aperture Library using finder or Photoshop itself - so I know changes have been made a new file saved (TIFF).
    I am wondering if I am missing some (new) preference such that the changes are not proerly being saved for re-display/storage in the Aperture Library
    I am running Lion OSX at the moment but the behaviour was the same under Snow Lepoard versions.
    Current version of Aperture is 3.1.3, Elements is 9.0
    Any help/suggestions greatfully received

    Try using psd.  Some rerports indicate some confustion between the apps with TIFF.  See:
    https://discussions.apple.com/message/15921933#15921933
    I cannot confirm, nor test, since I use PS CS5, and not Elements.
    Ernie

  • Keep getting message pop up "Error reading/writing file  "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

    Logic froze while I was working on something so I forced quit.  Now every time I open LOGIC a message pops up that says:
    "Error reading/writing file
    “com.apple.logic.pro.cs”:
    Logical end-of-file reached during read operation."
    The only button option is cancel so I press it and another message appears that says:
    "The Preferences are not loaded completely.
    Do not save them, as you would overwrite the Preferences file with incomplete data."
    Then when i close logic a box appears saying:
    "The Preferences are not loaded completely.
    Save them to "com.apple.logic.pro.cs" anyway?"
    There are 3 button options to press; ok, cancel or dont save.
    I press "don’t save" cuz I don't want to ruin anything.
    I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem.  If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done?  I have hundreds pieces of music files I've created.  I'm scared to mess anything up with all the hours and months of work I've done.  Is there anyway to fix this without loosing anything?  I'm using Logic Pro 8.
    Thank you

    You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
    Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

Maybe you are looking for

  • Delivery schedule in kanban

    Hi all. Can anybody tell me how the delivery schedule is created for scheduling agreement when bean scan empty? Thanks

  • Can't open Adobe Reader XI

    I am unable to open Adobe Reader XI on my new PC with Windows 8. Everytime I open a file, it just hangs and says (Not Responding) and I am forced to close the file. I have even uninstalled and reinstalled the program, but the problem persists. When I

  • Change the filename of an uploaded file.

    I have created a web app so that users can login to a secure zone and upload a file to a specific folder in my business catalyst site.  I would like to append the user's credentials to the filename.  I can see how to capture the user's firstname and

  • Creating new bookmark category

    I have created several bookmark categories before but I have not been able to do this in Firefox 9. eg Internet, Personal, how do you change the New Folder to a specific new Heading like Business, Private?

  • Condition for the nonexcisable Plant

    Dear  Experts whenever u will receive a material with  all excise & frieght & other taxes then in the Nonexisable Plant Material in coming cost goes to inventory means Basic + taxes Material Price at the system. how we can vibergate in the system so