Multiple Loggins

I was recently in a skype conversation with a friend from my cellphone. Not realizing that i was logged in another computer that was being used by someone. Can the other person hear my conversation with my friend? ANd if so skype should have an automatic logg off when you log in from a different computer or cell phone. 

It sounds like your requirements would be satisfied by configuring all of the AirPorts for a "roaming" network since they will all be connected to the same Ethernet backbone.
To setup a roaming network:
o Setup the router connected to the Internet to provide both NAT & DHCP services for the entire Ethernet backbone.
o Setup each of the AXs as bridges.
Internet > Internet Connection > Connection Sharing: Off (Bridge Mode)
For each AX in the roaming network:
o Connect to the same subnet of the Ethernet network
o Provide a unique Base Station Name
o The Network Name should be identical
o If using wireless security, use the same encryption standard (WEP, WPA, etc.) and password.
o Make sure that the channel is set at least three channels apart from the next AX.

Similar Messages

  • Limited login in multiple logon blocked condition

    Hello Expert
    we are using ECC6.0 EHP4, we blocked multiple logon on PRD system but now want to allow multiple loggin on some ID
    but apart from that we also want to resrtict no total no. of logon session by 4 only.
    suppose USER1 is SAP ID on which we want to permit multiple logon with this permission we also want to restriction as only 4-5 logon session are allowed (on the same front-end system or different-different front-end system) for this SAP ID.
    plz help us to get this.
    best Regards
    Deepak Singh

    Hi Deepak,
    Refer SAP Note # Note 142724 - Prevention of multiple SAPGUI logons
    you can disable multiple user login acrocss SAP instance via profile parameter :login/disable_multi_gui_login =1
    however , further you can add exception list via SAP profile parameter:login/multi_login_users= <userID>
    as per your requirement , you further want restrictions by allowing above exception list with only 4 sessions , which you can control via SAP profile parameter : rdisp/max_alt_modes = 6
    pls check if it works , but mind changing SAp profile parameter requires SAP system restart to reflect changes
    Regards,

  • Can anyone please make an app or intergrate location based reminders as multiple locations and have reminders pop up as a whole list just like you list them on a piece of paper and check them off as you walk in a store?

    My name is Tess Loggins and I am a lover of Omnifocus for iphone. I
    > love Omnifocus ,but it is lacking a feature for me. I don't really
    > know how to write this so, please bear with me. Ok. Take out a piece
    > of paper and label it on top Grocery List. Keep in mind that you like
    > to shop at Giant Eagles and Trader Joes. (these two stores are your
    > multiple locations)Write on your list eggs, pickles, butter, wine,
    > tomatoes and lobster(my favorite). So now you have your list. Now it's
    > time to go shopping. let's get into the car..(Please imagine all of
    > this on your iphone/and or using Omnifocus).Lets go to Giant Eagles
    > first. Wow! my whole list on that piece of paper pops up on my screen
    > on my iphone, so all I have to do is check off the items I needs as I
    > walk through the store. Now, I have decided that I will now go to
    > Trader Joes for the wine, pickles and lobster... (I didn't check off
    > the wine, pickles or lobster) Ok, back into the car.lets now drive to
    > Trader Joes. Now ,we are pulling into the driveway of Trader Joes and
    > BAM. my list wine, pickles and lobster (Just like I  wrote it on that
    > piece of paper) pops up. Now we enter Trader Joes and as we walk down
    > the aisle, we can check of the whole list because it's now on our
    > iphone screen. This to me is what I call technology.. I hope you
    > understand my point I am trying to get across. In your next Omnifocus
    > update can you PLEASE implement this to your app. I  want that whole
    > experience in the app. Is this at all possible to do? Is there even a
    > way that I can help to make this happen! In all the apps in the Appstore no one has come up with this idea and has not made app just like this.

    You seem to think you are talking to Omnifocus here.  The odds of actually reaching them here are practically 0%, I would guess.
    I suggest you go to the omnigroup forums and present your suggestions in the omnifocus forum.
    http://forums.omnigroup.com

  • Cant login multiple network accounts on the same client?

    Setup:
    I have created a simple Lion Server on a new i7 Mac Mini. I have configured Open Directory in Master mode and have setup 4 user accounts. I have enabled the File Sharing service and checked the "Make available for home directories" option on the "Users" file share. I have configured each of the 4 user accounts to use this location as the home folder. I have connected my client machines (all OSX Lion) to the Network Account Server.
    Problem:
    I can log one user into the client machine, but when using "Fast User Switching" and logging on as the second user I get the following error:
    "You are unable to log in to the user account "guestaccount" at this time. Loggin to the account failed because an error occured"
    In the console if I search for that user account the related error message is:
    11-07-31 12:30:54.993 PM authorizationhost: ERROR | -[HomeDirMounter mountNetworkHomeWithURL:attributes:dirPath:username:] | PremountHomeDirectoryWithAuthentication( url=afp://inntaserver01.local/Users, homedir=/Network/Servers/inntaserver01.local/Users/guestaccount, name=guestaccount ) returned 16
    Any thoughts as to why the Home Folder "mounter" failed in this scenario?

    Historically you have never been allowed to use Fast User Switching to log in multiple network logins on the same client machine. This certainly applied with Tiger, Leopard, and Snow Leopard. I have not yet personally tried this with Lion.
    I believe that the underlying reason for this not being allowed is down to how AFP volumes are mounted. The AFP mount becomes 'owned' by the user that triggers the login. With a network login the first user becomes the owner and this means subsequent attempted network logins are denied access to that share and hence cannot access their home directories.
    With Tiger, Leopard, and Snow Leopard servers, one could configure network home directories to be shared via NFS instead of AFP. NFS gets treated a lot different in terms of mounting, and is done more at a system level than a user level. While again I have not personally tried Fast User Switching with NFS shared home directories, this approach is specifically recommended by the authors of AquaConnect (a Macintosh Terminal Server solution) in order to allow multiple logins on the same Terminal Server. This seems to be for the same underlying reason. Using NFS does certainly work for use with AquaConnect and also works for the competing iRAPP Terminal Server product as well.
    Unfortunately, Lion Server while it can be made to run an NFS server, will not let you configure using NFS for sharing home directories. I have actually reported this as a 'bug' in Lion server.
    Neither the authors of AquaConnect or iRAPP have actually tested this scenario with Lion server yet, but AquaConnect do plan to investigate it. It could make it considerably more difficult to use their products.
    So in summary, using NFS to share network home directories in theory would avoid the problem and can be done with a Tiger/Leopard/Snow Leopard server, but cannot be done with a Lion server. It is possible however to mix Lion with older server versions. This might for some people be a possible workaround.
    PS. A bonus side-effect of using NFS shared home directories was that this allowed badly written software like Adobe's applications which are otherwise notorious for having major issues with network logins and home directories to work without errors. As an example Adobe Acrobat Pro introduced a bug in version 7.0 which prevented it being able to print-to-PDF (one of the major reasons to buy Acrobat Pro). It tooks two years for them to eventually fix this in Acrobat Pro 8.1 (I know because I spent that two years nagging them to fix it and was a beta tester). Unfortunately they then reintroduced the bug in Acrobat Pro 9.0. Fortunately I discovered this side-effect got round the issue although a clunkier workaround was also possible for Snow Leopard clients by redirecting certain folder paths.

  • How do I add multiple information under an user account?

    David, Thanks for all your help and I'm almost finished.  Hopefully this will be the last item.  I have users that register and then go to a profile page.  I need them to be able to recieve multiple messages and also input multiple scores.  I figured out how to do this but with only them being able to add one of each (its stored in the database table).  How can store multiple items for each user (with users continuing to increase)?  It's almost like I need a table for each individual user...

    Thanks, but I will proceed.  So getting back to my question...I figured that I needed a new table which I have.  I also set up a user page based on the session MM_Username and that is working fine.  I have 8 users in and everything is working fine on that end...that isn't the problem.  I used the insert command to insert all data/foreign key into table2 that I needed.  I need to be able to display a set of records from (table2) and when I try to use the MM_Username to filter that table, it doesn't work.  My understanding was that when a user is logged in, the session for each page is MM_Username so if the tables are set up with the same information, why doesn't it work?  I also inserted the table in the main loggin page and it actually does pull up the information, but even though I have the "repeat region command" it only shows the first record...it does however pull the first record for the logged in user.  But doesn't work at all on another page.  Please help.

  • Looking to Set Up Multiple Virtual Desktops

    Hi, I'm a newb looking to set up multiple virtual desktops for my employees. What would be the best windows image to use and how do I install Chrome onto the machines?

    Hi Shru84;
    Welcome to Azure.  Azure Virtual Machine as the name suggest are Virtual Server which function as your regular server but does not have a physical presence but is hosted on Azure Platform.
    We have a variety of OS flavors, there is nothing which is good or bad, its more of a question of your requirement.  Please note that the desktop Version of Windows 7/ 8
    are at the moment only available for MSDN subscriber.
    As for Chrome Installation its the same as installing it on a regular machine, that is opening up a web browser, loggin into chrome download site and installing it. ( http://www.google.com/chrome/ )
    Here is an example:
    his tutorial shows you how easy it is to create an Azure virtual machine (VM). This tutorial uses a Windows Server image, but that's only one of the many images available through Azure. This includes Windows operating systems, Linux-based operating systems,
    and images with installed applications. The images you can choose from depend on the type of subscription you have. For example, desktop images may be available to MSDN subscribers.
    You can also create Windows VMs using
    your own images as templates. To learn more about Azure VMs, see
    Overview of Azure Virtual Machines.
    NOTE:
    You need an Azure account to complete this tutorial:
    You can
    open an Azure account for free: You get credits you can use to try out paid Azure services, and even after they're used up you can keep the account and use free Azure services, such as Websites. Your credit card will never be charged, unless you explicitly
    change your settings and ask to be charged.
    You can
    activate MSDN subscriber benefits: Your MSDN subscription gives you credits every month that you can use for paid Azure services.
    How to create the virtual machine
    This section shows you how to use the From Gallery option in the Management Portal to create the virtual machine. This option provides more configuration choices than the
    Quick Create option. For example, if you want to join a virtual machine to a virtual network, you'll need to use the
    From Gallery option.
    NOTE:
    You can also try the richer, customizable Azure Preview Portal to create a virtual machine, automate the deployment of multi-VM application templates, use enhanced VM monitoring and diagnostics features, and more. The
    available VM configuration options in the two portals overlap substantially but aren't identical.
    Sign in to the Azure Management Portal. Check out the
    Free Trial offer if you don't have a subscription yet.
    On the command bar at the bottom of the window, click New.
    Under Compute, click Virtual Machine, and then click
    From Gallery.
    The first screen lets you Choose an Image for your virtual machine from one of the lists in the Image Gallery. (The available images may differ depending on the subscription you're using.) Click the arrow to continue.
    The second screen lets you pick a computer name, size, and administrative user name and password. If you just want to try out Azure Virtual Machines, fill in the fields as shown in the image below. Otherwise, chose the tier and size required to run your
    app or workload. Here are some details to help you fill this out:
    New User Name refers to the administrative account that you use to manage the server. Create a unique password for this account and make sure to remember it.
    You'll need the user name and password to log on to the virtual machine.
    A virtual machine's size affects the cost of using it, as well as configuration options such as the number of data disks you can attach. For details, see
    Virtual Machine and Cloud Service Sizes for Azure.
    The third screen lets you configure resources for networking, storage, and availability. Here are some details to help you fill this out:
    The Cloud Service DNS Name is the global DNS name that becomes part of the URI that's used to contact the virtual machine. You'll need to come up with your own cloud service name because it must be unique in Azure. Cloud services are important
    for scenarios using
    multiple virtual machines.
    For Region/Affinity Group/Virtual Network, use a region that's appropriate to your location. You can also choose to specify a virtual network instead.
    NOTE:
    If you want a virtual machine to use a virtual network, you must specify the virtual network when you create the virtual machine. You can't join the virtual machine to a virtual network after you create the VM. For more information, see
    Azure Virtual Network Overview. - For details about configuring endpoints, see
    How to Set Up Endpoints to a Virtual Machine.
    The fourth configuration screen lets you configure the VM Agent and some of the available extensions. Click the check mark to create the virtual machine.
    NOTE:
    The VM agent provides the environment for you to install extensions that can help you interact with or manage the virtual machine. For details, see
    Using Extensions.
    After the virtual machine is created, the Management Portal lists the new virtual machine under
    Virtual Machines. The corresponding cloud service and storage account also are created and are listed in those sections. Both the virtual machine and cloud service are started automatically and the Management Portal shows their status as
    Running.
    Click Virtual Machines, and then select the appropriate virtual machine.
    On the command bar, click Connect.
    Click Open to use the Remote Desktop Protocol file that's automatically created for the virtual machine.
    Click Connect to continue.
    Type the credentials for the administrative account on the virtual machine, and then click
    OK.
    TIP:
    In most cases, you'll use the user name and password that was specified when the virtual machine was created. Check the user name to make sure it has the correct domain information:
    If the VM belongs to a domain at your organization, make sure the user name includes the name of that domain.
    If the VM doesn't belong to a domain, either remove any domain information by starting the line with '\' or use the VM name as the domain name. For example,
    \MyUserName or MyTestVM\MyUserName.
    If the VM is a domain controller, type the user name and password of a domain administrator account for that domain.
    Click Yes to verify the identity of the virtual machine.
    You can now work with the virtual machine remotely.
    Regards;
    Prasant

  • How do multiple family members use iTunes.? One account or multiple?

    How do multiple family members use iTunes. One account right now but apps gets added to all devices and iTunes messages go to all devices.  Can multiple accounts be setup and still have ability to share purchased items?

    Hey Ajtt!
    I have an article for you that can help inform you about using Apple IDs in a variety of ways:
    Using your Apple ID for Apple services
    http://support.apple.com/kb/ht4895
    Using one Apple ID for iCloud and a different Apple ID for Store Purchases
    You can use different Apple IDs for iCloud and Store purchases and still get all of the benefits of iCloud. Just follow these steps:
    iPhone, iPad, or iPod touch:
    When you first set up your device with iOS 5 or later, enter the Apple ID you want to use with iCloud. If you skipped the setup assistant, sign in to Settings > iCloud and enter the Apple ID you’d like to use with iCloud.
    In Settings > iTunes and App Stores, sign in with the Apple ID you want to use for Store purchases (including iTunes in the Cloud and iTunes Match). You may need to sign out first to change the Apple ID.
    Mac:
    Enter the Apple ID you want to use for iCloud in Apple () menu > System Preferences > iCloud.
    Enter the Apple ID you want to use for Store purchases (including iTunes in the Cloud and iTunes Match) in Store > Sign In. In iTunes 11, you can also click iTunes Store > Quick Links: Account.
    PC (Windows 8):
    Enter the Apple ID you want to use for iCloud in the Control Panel. To access the iCloud Control Panel, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
    Enter the Apple ID you want to use for Store purchases (including iTunes in the Cloud and iTunes Match) in iTunes. In iTunes 10, select Store > Sign In. In iTunes 11, click iTunes Store > Quick Links: Account.
    PC (Windows 7 and Vista):
    Enter the Apple ID you want to use for iCloud in Control Panel > Network and Internet > iCloud.
    Enter the Apple ID you want to use for Store purchases (including iTunes in the Cloud and iTunes Match) in iTunes 10 in Store > Sign In. In iTunes 11, click iTunes Store > Quick Links: Account.
    Note: Once a device or computer is associated with your Apple ID for your iTunes Store account, you cannot associate that device or computer with another Apple ID for 90 days. Learn more about associating a device or computer to your Apple ID.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • How do I move multiple dimension members up one level in planning?

    I can't figure out how to select multiple members.
    I hope I don't have to cut and paste them individually.

    ODI maybe ?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?

    How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?
    Have an Exchange mail account setup and accessible in my mail on iPad... however my kids use it and i would like to restrict them from accessing this specific portion of the device.  I tried viewing restriction options and do not see that i can apply a restriction specifically to Mail.  Thanks for your help.

    Not a feature of iOS. Check the AppStore to see if there are other
    mail apps that allow passcode protection.
    Or use Safari to log onto your email via a web-based interface and
    enter your credentials each time. A bit slower, but the kids will
    not know the details to login.

  • How can a family with multiple existing accounts use Home Sharing?

    I'd like to use the new Home Sharing feature, but it appears to be restricted to families in which all of the family members share a single user account.
    We already have separate accounts for each family member. Is there some way for us to use Home Sharing without abandoning most of our existing accounts, along with all of the purchases made by those accounts? I don't think anyone in this situation would be willing to do that.

    Eh. I am not too sure since I have not messed with it much but I do have a great deal of experience with multiple accounts. Each computer can be authorized for multiple accounts. As can iPods. iPods can sync songs/videos/apps from multiple accounts as long as the computer is authorized with them. What I have set up here, is I buy my stuff I want, my parents buy what they want and so do my brothers. When my bro gets something I want I just move it to my computer. That way all our accounts are separate, but if there is something I want I can get it. Also, since the music no longer has DRM, it won't matter. It will play on any computer. What you should see is if you can just do the shared library with multiple accounts. Then if you don't have videos or such, you can get apps or music. Hope this helps!

  • How can multiple users use the same Creative Cloud Individual on one single-machine?

    We have one shared graphics workstation, which is infrequently in use by different people - therefore we bought a single-workstation license (which we were referred to "Creative Cloud Individual"). In the FAQs it says it installs locally, but whenever a user different from the installing adminstrator logs in, he is forced to use the trial.
    Is there a way to make the local installation usable on that single machine for multiple users?
    Thanks in advance for your reply

    Serenatasystems do the other users not have administrator access?  What happens if they sign in using the Adobe ID tied to your Creative Cloud subscription?  Do your Adobe Creative applications then exit trial mode?

  • How can I use multiple ipad's on one account without sharing individuals personal email accounts?

    Is it possible to have multiple ipads on one account and share info, but also allow the individual users to have personal email that is not seen on the other ipad's? We have all ipads on same icloud account because we all need to see the same ical. It seems like that's the problem. If it IS related to icloud then if we have separate icloud accounts, how would we share the main ical otherwise? Sharing the ical is very important for this business so everyone can access the daily schedule. Of course each user still wants to have private email.
    Hope this wasn't too confusing!
    Thanks!
    Doreen

    you could set up the main icloud itunes acount for ical and not have in setup on the devices
    and share the calandar with the other itunes accounts on the devices
    or only have it on one device
    devices have the users indervidual itunes icloud setup
    they should be able to access the shared "main" itunes icloud ical account once it's shared
    http://howto.cnet.com/8301-11310_39-57542557-285/three-methods-for-sharing-an-ic loud-calendar/
    if the devices are company owned you could go futher and setup find my iphone on the main itunes account
    and not on the user icloud accounts

  • What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

    What happens on iCloud when multiple family members use the same Apple ID?  For example if we all choose to use iCloud for contacts, are they all merged together?  We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

    Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
    You can only unravel this by
    1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
    2. Sign out of System Preferences>iCloud
    3. Create a new Apple ID and open a new iCloud account with it for your own use.
    4. Import the vCard back into the iCloud contacts page.
    5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
    6. Go to the new iCloud account and delete his contacts individually.
    Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

  • ICloud with multiple family members sharing one iTunes account?

    How will iCloud work for the case where multiple family members share an iTunes account but each has his/her own iPhone/iPad/PC?
    Will iCloud replicate content based on email address, unique Apple ID, iTunes account, or??  If iTunes, we could have trouble as three of us share our iTunes account (started when our daughter was young and continued for simplicity).

    Keep one Apple ID for iTunes purchases (apps, music, etc.) for all family members on the iTunes Store and use different Apple IDs for each iCloud user. That worked for me.

  • HT204053 I have multiple family members using one apple id account and all of each others information is going onto each others phones/how do i stop this?

    I have multiple family members using one apple id and all of our data is going onto each others phones/how do i stop this?

    Each person needs to have their own separate Apple ID along with their own separate computer user account and iTunes Library.

Maybe you are looking for