Multiple MBOs design

I am new to SUP and going to develop native mobile app that consumes SAP BAPI.
My question: is it possible to design MBOs first, then relate them to BAPI later?
We would need multiple MBOs like Order - OrderedItem.
Thanks
Bob

Hi Bob,
While creating the MBO's you can select an option of Bind Data Source Later and add some attributes as per the DB schema.
Once you have your RFC's/BAPI's ready, select the MBO and click on Bind Data Source in the properties view. Search the RFC, specify input/output parameters and then map the existing MBO parameters/attributes to the RFC parameters.
You can do this for Multiple MBO's, but i cannot think of a use case where in the above approach can be used reducing the development effort.
Please let me know how would the above approach help.
Regards,
Kartik

Similar Messages

  • IDOC to (multiple) file design help

    Hi all,
    i am trying to do a IDOC to multiple file scenario.
    Requirement:
    An outbound idoc has 4 segments.
    now i want the output of first 2 segments in one file and second 2 segments in another file.
    How to approach this design (without BPM).
    Waiting for reply,
    Senthilprakash.

    Hi,
    Use multimapping (use external definition of Idoc in source side) in which target message occurance should be 0..unbounded.
      write one UDF like below
    for(int i=1;i<=4;i++)
         if(i==2||i==4){
         result.addValue("");;
                     so that it will split the target structure 2 time(when i=2 and i=4). so that you map all the source fields to target fields(all one to one mapping except UDF).
    start doing this so that you will get the required output easily.
    thanks,
    madhu

  • Iweb 09_good for multiple site designs

    Hi!
    I am looking to upgrade to a better imac and iWeb 09 to create "microsites" for my current print design clients to help expand their marketing. Is this version of iWeb easy to use for that or does it to multiple sites at all? Basically I am asking is this version a good one for multiple site building? Ease of use for that purpose? Thanks!

    Welcome to the Apple Discussions. iWeb 09 can handle multiple sites quite easily. However, a lot depends on where you plan to host the sites and manage them. Will they each have a domain name for the site?
    On MobileMe you can have only one site with CNAME domain name forwarding to the same account. The others must use the standard html URL forwarding. AND they all must be created in the same Domain.sites2 file. That can be a problem.
    If you use the standard domain name forwarding with MMe for all the sites then you can have a separate domain file for each client and use Web Site Maestro to manage then them and select which one to open and work on.
    If each client will provide their own hosting server then it's possible that CNAME forwarding can be used for each client if they have a domain name and their server supports CNAME.
    I use iWebSites to manage over 75 individual sites. It lets me create multiple sites and multiple domain files.
    This lets me edit several sites and only republish the one I want.
    OT

  • Sync process for multiple MBO

    Hi All,
    I have created 4 multiple type of MBO which have different structure.
    when i have started my application in android only single MBO will initialize and database will create. Below is my
    packages.mboPackages.authentication.ProCRMDB
    if(!ProCRMDB.databaseExists()){
           ProCRMDB.createDatabase();
      }else{
           ProCRMDB.openConnection();
    But when i am going to call another MBO and i am checking condition below then it will directly goes into else condition and throws exception that
    com.ianywhere.ultralitejni12.implementation.JniException: UltraLiteJ Error[-141]: Table 'procrm_1_0_counzonestadisf4' not found even i am calling this class at first time.
    packages.mboPackages.counzonestadisf4.ProCRMDB
    if(!ProCRMDB.databaseExists()){
           ProCRMDB.createDatabase();
      }else{
           ProCRMDB.openConnection();

    Below is my code
    AuthenticationMBO.syncLeadList(userName);
              * Syncing countries
             AuthenticationMBO.syncCountryDropdown(userName);
              * Syncing Zones
             AuthenticationMBO.syncZoneDropdown(userName,AuthenticationMBO.isDefaultCountry(context));
             GenericList<ZoneF4> allZonesList = ZoneF4.findAll();
             for (ZoneF4 zoneF4 : allZonesList) {
              AuthenticationMBO.syncStateDropdown(userName,zoneF4.getZONE());
              StateF4.findAll();
    public static void syncStateDropdown(String userName,String zoneCode){
      PersonalizationParameters parameters = ProCRMDB.getPersonalizationParameters();
      S_ARTEC_SFA_RFC_GETF4_I_GET_ADDR addr = new S_ARTEC_SFA_RFC_GETF4_I_GET_ADDR();
      addr.setZONE(zoneCode);
         parameters.setUserId(userName);
         parameters.setPK_STATE_ADDR(addr);
         parameters.save();
            ProCRMDB.disableChangeLog();
            ProCRMDB.subscribe();
            ProCRMDB.synchronize();
    In that case i can get only for only one state values in StateF4.findAll() which is recently synced.
    I want to get values for all states if i am in offline mode.
    I didn't defined any sync parameters.
    below is my screenshot of mbo

  • Multiple /dev designator fstab(solved in udev rules)

    Is it possible to enable multiple USB ID's in fstab as follows;
    /dev/sc[0-9] /cdrom iso9660 ro,users,noauto  0  0
    The cdrom is connected on an IDE-USB cable.
    The idea is to enable audio CD regardless  of the state of the USB selection process.
    Adding an entry for each USB designator is an option.

    Entered the following in CD Symlinks;
    ==============================================================
    BUS=="scsi",    KERNEL="scd[0-9]", ACTION=="add", IMPORT="/sbin/cdrom_id --export $tempnode"
    =============================================================
    This seems to have solved the selection for audio cd's in USB-cdrom, regardless of the designator.

  • Master/multiple slave design example

    Can someone please post an example of the master/slave design with multiple slaves.  I cannot get the second slave loop to start.
    Thanks.
    metzler CLAD

    Yes, you are correct that the default master/slave uses notifier, not queues.... my mistake.
    Deciding weather you use master/slave or producer/consumer is important since there are some differences between queues and notifiers:
    a) Notifier can loose data, queues only unlikely (if they do, they are configured in a wrong way or the system is already messed up!)
    b) Queues should not have more than one reader but can have unlimited number of writers
    c) Notifiers should have only one writer, but can have unlimited readers
    In the screenshot PNT attached, the slaves will run in parallel and (hopefully) will be kind of synchronized. If you dont like that, you can add different timings to both loops, which can(will) lead to loss of data.
    Regarding your requirements, i think you will better use producer/consumer (so my answer wasn't too bad.... ) since i asume that you do not want to loose data!
    And if you choose producer/consumer, please note my hints from the first post...
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Performance issues using multiple CC design programs?

    Hey! I'm Gwidz, and I'm having some performance issues with my adobe programs. I primarily use Photoshop, InDesign and Illustrator for design work. I find that when I have any two of them open, I experience delays in clicking and dragging using my pen tablet, and laggy zooming in/scrolling. This issue disappears when I only have one program open.
    I just bought this laptop to use these programs. Here's the specs:
    Operating system: Windows 8 64 bit
    Processor: 4th gen intel i7 4700HQ
    Ram: 16gb DDR3
    Graphics: NVIDIA GeForce GTX 770M 3GB GDDR5
    Cost me 2000 bucks on amazon, and I'm pretty disappointed in how things are going right now. I definitely don't think it could be a hardware issue, could it?
    I'm using an SSD as my scratch disc, and using the 64 bit versions of all programs that have it. Nothing else running in the background except these programs, and yet still I experience poor performance.
    Admitedly, I'm new to windows 8, and I'm learning everything that I can about it in hopes of resolving this issue.
    If anyone has any advice, any and all is greatly aprpeciated!

    I'm seeing this exact same choppiness and VERY slow response times with the same low use of CPU and memory... WITH JUST ONE APP OPEN!  Illustrator.
    Macbook Retina Pro, 15 inch.
    I've tried with the GPU forced off, and forced on, and on autoswitching.
    I've tried clean reinstalls.  And reboots. Etc.
    This is not hardware related.  It's something utterly flawed with the way Illustrator (and InDesign) draw do things.  They are just grotesquely inefficient.
    The fact that the program/app makes no effort to use more CPU/GPU to speed up responsiveness to the user input is the real indicator of how poorly optimised this code is. 
    After Effects is better.  But it's adaptive degradation STUTTERS grotesquely, and it's actually better to try to turn that off.  Although I'm having a hard time trying to figure out how to turn that off at the moment.. forgotten where I previously found that switch.
    Photoshop is also better. 
    I'm also talking about small files. Nothing in them.  Just start drawing... Stutters... atrocious frame rates for the update of the screen and very poor response rates to input.
    This is 64 bit optimised?  I don't think so.

  • Possible? Cilent-server multiple responses design problem!

    Hello friends,
    I have a problem that needs you kind help.
    I have a client-server problem. The client side is an application, and the server is a servlet/jsp program. Now I want that whenever user sends a request to the server to get data, the server can send a few responses back to clients. Note that these response data are not continuous generated by a program in the server, so I do not want to wait until all the responses are generated before sending them all to the clinet. The time to send back each response data varies from 10 milli-sec to 2-3 seconds currently.
    So any one has some experience of design on this kind of application?
    Thanks!

    In the client application, create a URL connection that connects to the JSP/Servlet. In a loop, repeatedly connect to the JSP/Servlet and read in the response. Come up with some kind of special response like '<response type="END"/>' that will signal the end of the input.

  • How to Save PCB design as a component

    Hello,
             I'm trying to combine multiple PCB designs into one file in Ultiboard, and I recently find out it has the ability to save pcb design as a componet. Is anyone know how to use this feature ?
    Thanks 
    Solved!
    Go to Solution.

    I don't know of any easy way of achieving this. It would be possible to manually modifying the ewnet file before you transfer to Ultiboard. For this, there is no documentation of the file format (but it is ASCII) and it would rely on you later selecting the correct RefDes when you place the part.
    Garret
    Senior Software Developer
    National Instruments
    Circuit Design Community and Blog
    If someone helped you, let them know. Mark as solved or give a kudo.

  • Plant Design

    Hey Guys,
    I have a very high-level question about the design of plant hierrachy. We are planning to move independant business units in a single plant. We have to decide between 1 plant - 1 sloc or 1 plant multiple slocs design (one SLOC per business unit). I guess both designs are feasible in SAP. Just would like to have some insight on how it will impact diffrent areas such as planning, material management, distribution, reporting as such.
    Other way of framing would be whether dividing business units by SLOCs more beneficial/ less advantageous to 1 plant- 1sloc scenario.
    Entrire business operation in single SAP company code.
    Appreciate any inputs.
    Regds
    YG

    Hi YG,
    plants are the strongest organisational element in the logistics area of SAP, meaning that multiple business rules are set at the plant level, such as material valuation, authorisations, planning elements, MRP rules....
    The questions which will lead to the right answers are:
    - Do the different business units share the same materials and services?
    - Do the materials and services which are common to the business units share the same attributes across these business units?
    - Who is responsible for the planning and the replenishment?
    - What are the information visibility requirements across the business units (e.g. can they see each other's stock?)
    - How integrated is the supply chain, e.g. can the businesses take each other's materials to supply their customers/production/maintenance sites?
    - What are the integration requirements with HSE work areas?
    In general the safest way is to follow the physical representation of the plant and represent in the system what you can physically see when walking through the building e.g. are all these businesses located at the same address?
    Best regards,
    Sylvan

  • What order to multiple custom workflows fire in?

    If I have multiple custom Designer workflows that happen on the same list , what order are they fired in?  In the order in which the appear in Designer (top to bottom)?  or do they fire simultaneously?
    There are no mistakes; every result tells you something of value about what you are trying to accomplish.

    I'd concur with Andrew. You may also want to consider IRM within library / list settings if you have a consistent and determined order for your workflows.
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Consuming WebService with 1-to-many relationship in one request, multi MBO?

    Hi
    I recently have started working on SUP. I was trying to create MBO from a webservice that provides me details of an Employee like name , age , ID and address. The employee can have many adress in this case. The webservice returns all the things in one request. I need to know how to create multiple MBO from this in one request. That is when I request to the webservice the name , age , ID to goto one table and addres should be populated in a separate table with ID as the realtionship parameter in both tables.
    I have connected to the webservice and can see data in preview. I had on demand cache policy with default parameter as employee ID, so it populated CDB with as many number of rows as the addres exists for the same employee which was not the desired result.
    Please let me know the most efficient way to do the same.
    Thanks
    Preksha

    I am able to consume the webservice and make multiple MBO with single call.
    http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01283.0200/doc/html/fre1249336854524.html

  • Data Retrieval in IOS via MBO consuming webservice.

    Hi,
    Need some solution for this issue . We have this webservice that returns value based on a key "userid" for which we receive a listing of data with column names "Name ,Age,Telephone"
    What i have done is created an MBO"GetUserdetails that would consume this webservice. 
    GetUserDetailsMBO has the following attributes.
    +userid
    -Name
    -Age
    -Telephone
    where 'userid' is a input.
    This works out fine when we use the workflow model and displays the data. I generated the code and used it for my  native application, tried findAll , findByPrimaryKey etc . it dint yield any results for me as the output is always null/empty. Can you update me on the steps that needs to be followed to retrieve the data.
    How do we ascertain if the import has drawn the actual data from the MBO to the local DB?
    Regards,
    Vinay

    I am able to consume the webservice and make multiple MBO with single call.
    http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01283.0200/doc/html/fre1249336854524.html

  • Multible MBO's with input parameter's how to pass them?

    Hello gurus i'm currently working on native app that based on BAPI MBO's and each MBO takes input parameter and return some values
    at the first MBO i made the input parameter is personalization key but after adding a second MBO and make the same to the second MBO when i generated the code and passing the PK values only for the first MBO i got an error
    any help on how to pass input parameters for native app that based on BAPI for multiple MBO and i will not pass all the parameters at the same time depend on the screen that i'm in i will call MBO
    thanks in advance

    Steps to do a sync from MBO is given below (android native app):
    Create MBO and PK.
    Map MBO load parameter with PK.
    Create Second MBO and another PK (or use existing PK if the input parameter of first MBO is same as second MBO).
    Map Second MBO load parameter with second PK.
    Sample native code (android):
    //Assing Values to PK
    PersonalizationParameters param = CustomersDB.getPersonalizationParameters();
              param.setPK_CustomerInput("1001");
              param.save();
              CustomersDB.subscribe();
    //Make a blocking synchronize call to Unwired Server to pull in all MBO data
              CustomersDB.synchronize();
    //Finall is the query generated by SUP to get the data from the table Customers.
    //Customers is the MBO name in SUP and table name in Device DB
    Customers.findAll()
    Give the steps you performed with relevant screen shots to help you further.
    More info, Developing SAP Android Mobile app from scratch - Part 4
    Midhun VP

  • Email is very slow with icloud and oftentimes won't go through at all. Ugh.

    I've switched to "free" icloud - having no choice, because i've used the same email address for years in business and personal dealings and honestly, i'd rather be paying every year as i've always done. Between icloud and lion (which cost to upgrade to)  I'm fed up and it's costing me a LOT more money and wasted time - so much for free!
    None of my microsoft office programs will work now in addition to other software
    My computer is slow as a snail now
    My email is unpredictable and can't handle the files it used to
    My email is slow and 1/2 the time doesn't work - just freezes up
    My ipod touch can no longer be synced with my computer because of the version it is - which means i cannot use it for booking appointments on the road anymore. Nor can i refer to or add contacts on it.
    I feel duped - now looking at needing new computer, new ipod, new microsoft office suite... all of which i use for work every day. I'm feeling like a windows PC user.
    I'm guessing that if I don't switch my macbook to lion i'm going to have sync problems there too, or is that out the window anyway? I'm afraid to turn it on at this point.
    And, losing Spaces - and having Desktops - which are so small I cannot see what's on them, total waste of time clicking back and forth repeatedly. I used spaces all day every day because I operate multiple adobe design programs simultaneously along with email, etc. I cannot see the contents of the new 'desktops' so I have to keep clicking them all until i find the one i'm looking for. I'm leaving out the other quirky glitches. Try changing your desktop background, you have to change each 'desktop' individually and when you power down, your changes are lost each night. Laughable.
    Ready to dump mac mail and pay another service provider, use time machine to return to snow leopard, lose all the work i've done since then, write off the cost of lion upgrade as a waste of money and call it a day. I have to say, this is the first time I've ever been unhappy with apple - but wow, they've blown it in a big way here.

    Is your printer still in warranty? You can check with HP's warranty tool here.  Are you located in the US?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for