Multiple rows in report

Hi,
I have a problem on my report. All sales data, cost data, GL data of a project on a single row but paid invoices are displayed on a separate line while it should be on the same line as the project.
The paid invoices have project on the data rows in the cube but appear on a separeate line.
Any ideas will help.
This a very open question but cannot explain in detail, complex report.
Kind Regards
Niren

Hi V,
It is not a one to one mapping but paid invoices are calculated as
( Cummilative BALANCE) Cleared Document type (RV) - (Cummilative BALANCE) (Open Document type (DR) - Open Document type (DG))
Kind Regards
Niren

Similar Messages

  • How to convert colon separated column values in multiple rows in report

    Hi All,
    I want to display colon separated values from a column, in a multi row in report.
    For example i have a column1 in a table with value 'A:B:C' , column2 has value '1'.
    i want to show in a report three rows using these two columns like
    column1 column2
    A 1
    B 1
    C 1

    Here's one way:
    SQL> create table test (col1 varchar2(20), col2 number);
    Table created.
    SQL> insert all
      2    into test values ('A:B:C', 1)
      3    into test values ('Dg:Ezs', 2)
      4  select * from dual;
    2 rows created.
    SQL> select
      2    t.col2,
      3    regexp_substr(t.col1, '\w+', 1, t2.column_value) c1
      4  from test t,
      5    table(cast(multiset(select level
      6                        from dual
      7                        connect by level <= length(t.col1) - length(replace(t.col1, ':', '')) + 1
      8                       ) as sys.odcinumberlist )) t2
      9  order by 2, 1;
          COL2 C1
             1 A
             1 B
             1 C
             2 Dg
             2 Ezs
    SQL>Edited by: Littlefoot on Jan 31, 2012 10:13 AM

  • How to select multiple row in ALV report

    Hi friends,
    1. How to select multiple row in ALV report
                   ( How to set tab in ALV report and want to select multiple line.)
    Thanking you.
    Subash

    Hi Sahoo,
    If you are using the class CL_GUI_ALV_GRID. In methods SET_TABLE_FOR_FIRST_DISPLAY.
    in layout structure you will find field SEL_MODE
    pass :
    LS_LAYOUT-SEL_MODE = 'A'.
    In PAI.
      CALL METHOD GRID->GET_SELECTED_ROWS
        IMPORTING
          ET_INDEX_ROWS = T_ROWS
          ET_ROW_NO     = T_ROWID.
    Hope these will solve your problem.
    Regards,
    Kumar M.

  • Interactive report – column heading in multiple rows

    I am using interactive report. My question to the expert/guru&rsquo;s is: - How do I change column heading into multiple row with text wrap.
    For example:- My column heading is
    Is Employee Trained ? -------&gt; (single row display)
    I want to make it display like
    Is Employee
    Trained ? ------&gt; (Multi row display)
    Sagar

    Hi,
    What you could do is, disable the download csv function from IR (Interactive Report Attributes--> Search Bar-- Uncheck Download) and in the region header create a link and redirect it to another page which will have the csv report output.
    e.g. <a href="#"  onclick="javascript:redirect('f?p=&APP_ID.:3:&SESSION.::&DEBUG.:3::');"" >Download Report </a>
    Here I am redirecting the link to Page 3. On Page 3 create a sql report with the same query and make report template to csv. Thanks,
    Manish

  • Multiple rows and multiple cols inone report

    Hi
    All
    I have a req where i need to build a report with multiple rows and multiple columns
    .... .......................  2009 jan ,        2009 feb ,      2009 march ,   2009 april...........................
    ............................ dim3 mem1 ,    dim3 mem1 ,  dim3 mem1,     dim3 mem1..........................
    dim1 mem1
    dim2 mem1
    calc value
    dim1 mem2
    dim2 mem1
    calc value
    dim1 mem3
    dim2 mem1
    calc value
    please advice if i can use the colkey range and rowkeyranges for this type of expansion and how?
    thanks
    Edited by: bpc_now on Oct 21, 2010 6:40 AM

    Hi,
    If you need multiple dimensions, then the first thing is to specify EVDRE("mXn")
    where m = number of dimensions in column
    n = number of dimensions in the row.
    If the EVDRE has already been built and you wnat to change it, then you need to change the rowkeyrange and colkeyrange. And accordingly, you should have 4 expansions - 2 for rows and 2 for columns.
    Hope it helps.

  • Deleting multiple rows in a report ?

    db11gxe  , apex 4.0 , firefox 24 ,
    how to delete multiple rows in a report at one time ?
    thanks

    Hi newbi_egy,
    Here is a small demo with few steps that can be used in your scenario-
    1) Below is the query of a report on emp table which has empno column with unique values-
    SELECT APEX_ITEM.CHECKBOX(1,empno) " ", ename, job FROM   emp ORDER  by 1
    2) A Delete button is created that submits the page.
    3) An on-submit process is created with Process point On Submit - After Computation and Validations with condition that the below process runs when Delete button clicked.
    BEGIN
    FOR i in 1..APEX_APPLICATION.G_F01.count
    LOOP
    delete from emp where empno=APEX_APPLICATION.G_F01(i);
    END LOOP;
    END;
    I hope this might help you.
    Regards,
    Das123

  • Multiple rows coming for COPA report

    Hi Experts,
    In my COPA report multiple rows are coming like ...
    COGS-Budgetted period.
    0.2765- 1st row
    0.2765- 2nd row.
    all the records are coming like this only...I want only single row. can anybody tell me the reason and solution...
    If u r help in this regards I will appreciated with points.
    Thnx in advance,

    Have you applied characteristics restrictions to one currency type and to a single InfoProvider?

  • Multiple Rows for Same Value in Matrix Report

    Hello
    I am trying to create a matrix report that shows different page for each Category. Report looks like follows:
    Page1( for Category '1')
    Agent |
    Calls |
    Sales
    TestAgent1 18
    3
    TestAgent1 5
    1
    Page2( for Category '2')
    Agent |
    Calls |
    Sales
    TestAgent1 26
    5
    TestAgent1 13
    2
    The issue is as you can see in above table, that i am getting repeated rows for same agents. I have tried making a parent group on Agent but it would still keep showing multiple rows. Ideally, it should show each agent only once in each page.
    Any help would be appreciated.
    PS: I am new to SSRS and this is my first time on microsoft blog, so i apologize if i wasn't able to follow the protocols/culture here.
    Thanks

    Hi M Adnan,
    According to your description, you want to show a total Calls and total Sales for same agent so that it has only one row for each agent in your category group. Right?
    In this scenario, if you only have a row group for category, it will show all “detail rows” in this groups even the agent of these rows are same one. So we can add a row group, set those detail rows group by agent and use Sum function to get the total Calls
    and Sales. It looks like below:
    If we want to display each Page in horizontal, we just need one Category column group for grouping rows and use sum function to get total Calls and Sales for each agent. It looks like below:
    Reference:
    Understanding Groups (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou
      

  • Multiple rows in interactive reports?

    Can we click on multiple rows at a time in interactive reports??
    If yes how.....
    Would reward.
    thanks

    alchemi,
        u can use that one by using the  hide stmt on the desired two fields.
    And in the first secondary list, u can put a if condition for the hided fields. so that if the condition is satisfied u can process a set of commands else process the other block of commands.
    Regards...
    Arun.
    Reward points if useful.

  • Selecting multiple rows in BW Web reports

    Hello Everyone,
    I am working on the BW web report where we want to give user interaction screen through BSP.
    We achived this for a single row in BW report where when user clicks on some link or button it opens up the BSP screen with the selected row value in BW report.
    Now we want to give multiple rows option where user can select multiple rows in BW report and the corresponding values should be available in BSP by clicking of some button in BW.
    has anyone done this before. thanks in advance.
    regards
    rajeev

    HI
    Int leadSelection = wdcontext.nodemodelnode.getLeadSelection();
      for(int i=0;i<wdcontext.nodeModelNode.size;i++)
        if(wdcontext.nodeModelNode.isMultiselected(i) || leadSelection ==i)
               String name = wdcontext.nodemodelnode.getnameelementatindex(i).getName();
               String  address = wdcontext.nodemodelnode.getaddresselementatindex(i).getAddress();
               String age = wdcontext.nodemodelnode.getAgeelementatindex(i).getAge();
            Create a method for the Table Property onLeadSelect() where you can open a popup window
             Create a value node and with attributes same as Table attributes and then set the values of the table
             to the value node attributes.
    Thanks

  • Want to update multiple rows of the report but getting a bug.

    hi,
    I am trying to update multiple rows of a report.For that I have created a teport with dynamic checkbox generated using ---HTMLDB_ITEM.CHECKBOX(1,utt.trouble_ticket_id) " "----.Checkboxes are rendered perfectly on the report.
    but when I tried to update the selected rows of the report as given in the documentation
    begin
    :P16_priority:=htmldb_application.G_F01.count;
    for i in 1..htmldb_application.G_F01.count
    loop
    update umanage_trouble_ticket set severity =:P16_priority where
    trouble_ticket_id = htmldb_application.G_F01(i);
    end loop;     
    end;
    I found that all the rows are updated.not only selected rows.
    and the count it gives =no of rows returned + no of rows selected.
    Please help me regarding this.
    thanx.
    BHARAT

    Hi Bernhard,
    I think that u didnt get y problem.
    When I take the value from "htmldb_application.g_f01(i)" then it should return id's of rows that are checked but when I do that it returns id's of all the rows.So I am not able to update only checked rows.
    from id's of rows i mean value provided when generating checkboxes through query.
    htmldb_item.checkbox(1,trouble_ticket_id) " "
    I am approching to the solution as specified in the documentation. "Adding check boxes to each row in a report".
    but still cant find any solution.
    thanx that u showed some intrest in my problem.
    If u can get the solution reply soon.
    Regards
    BHARAT

  • How To Restrict Number Of Rows For Multiple Group In Report Output

    Hi ,
    I have a requirement to restrict number of rows in report output.I have three different group , if i use same no of rows to restrict then output is as expected but if i want Deduction group should have 7 rows , earning should have 5 rows and Tax group have 3 rows in report output then XML tag is not working.
    Below is the XML tag i am using -
    First i have declare the variable to restrict the rows -
    <xsl:variable name="lpp" select="number(7)"/>
    <xsl:variable name="lpp1" select="number(5)"/>
    <xsl:variable name="lpp2" select="number(3)"/>
    For Each -
    <?for-each:PAYSLIP?>
    <xsl:variable xdofo:ctx="incontext" name="DedLines" select=".//AC_DEDUCTIONS"/>
    <xsl:variable xdofo:ctx="incontext" name="EarLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION!='Taxable Benefits']"/>
    <xsl:variable xdofo:ctx="incontext" name="EarTaxLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION='Taxable Benefits']>
    <?for-each:$DedLines?><?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
    <?if:(position()-1) mod $lpp1=0?><xsl:variable name="start1" xdofo:ctx="incontext" select="position()"/
    <?if:(position()-1) mod $lpp2=0?><xsl:variable name="start2" xdofo:ctx="incontext" select="position()"/>
    Report output is tabular form (one page has two column - Earning and Deduction ) . Tax group comes below earning group.
    Deduction Group -
    <?for-each-group:$DedLines;./REPORTING_NAME?><?if:position()>=$start and position()<$start+$lpp?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Earning Group -
    <?for-each-group:$EarLines;./REPORTING_NAME?><?if:position()>=$start1 and position()<$start1+$lpp1?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Tax Group -
    <?for-each-group:$EarTaxLines;./REPORTING_NAME?><?if:position()>=$start2 and position()<$start2+$lpp2?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Please let me know in case additional detail is require.
    Thanks in Advance.
    Thanks,
    Harsh
    Edited by: Harsh.rkg on Jan 14, 2013 9:43 PM

    variable lpp2 is declare to restrict EarTaxLines -
    <xsl:variable name="lpp2" select="number(2)"/>
    This will help to restrict the no of rows on one page , if we have more then two tax benefits line then layout will roll over to continuation page.
    As part of report output my expectation is if i restrict Earning , Deduction and Tax benefits to same no of line for example - variable lpp ,lpp1 and lpp2 have same value "number(2)" , we can see the layout is continue on next page (restrict every group can have max two lines) .This is the reason we have 4 header grid , deduction and Tax Benefit lines are rolled over to continuation page .But if we restrict different value for each variable then continuation page layout is missing .
    When we tried for <xsl:variable name="lpp2" select="number(3)"/> value continuation page layout is not getting generate for both employee number .

  • The simplest way for plsql procedure to return multiple rows

    Hi,
    What is the simplest way for plsql procedure to return multiple rows (records). There are many combination of ways to do it but I am looking for a solution that is appropriate for plsql beginners. Many solutions use cursors, cursor variables, collections and more that kind of things that are complex on the face of it. Is it somehow possible to achieve the same with less effort?
    Sample query would be: SELECT * FROM EMPLOYEES;
    I want to use returned rows in APEX to compose APEX SQL(in that context plsql) report.
    It is enough to use just SELECT * FROM EMPLOYEES query in APEX but I want to use plsql procedure for that.
    Thank you!

    Hi,
    It depends :-).
    With +...that is appropriate for plsql beginners...+ in mind... it still depends!
    The list of techniques (ref cursors, cursor variables, collections, arrays, using explict SQL) you have referenced in your post can be made to work. but...
    +Is it somehow possible to achieve the same with less effort?+ Less effort : That needs to be defined (measured). Especially in the context of pl/sql beginners (who is a beginner?) .
    What is the level of "programming experience" ?
    What is the level of understanding of "Relational Result set" as processible in Oracle?
    If you are looking for
    Process_the_set_of rows_in APEX () kind of capabilitywhich "abstracts/hides" relation database from developers when working on relation database, it may not be the best approach (at least strategically). Because I believe it already is abstracted enough.
    I find REF CUROSOR most effective for such use, when the "begginer" has basic understanding of processing SQL result set .
    So in a nut shell, the techniques (that you already are familiar with) are the tools available. I am not aware of any alternative tools (in pure Oracle) that will simplify / hide basics from develpers.
    vr,
    Sudhakar B.

  • Is there a way in Oracle to return multiple rows as a single string?

    Hi gurus,
    I just got help from your guys fixing my dynamic sql problem. What I am doing in that function is to return a single string from multiple rows and I use it in the select statement. It works fine once the problem was solved. But is there any way in Oracle to do this in the select statement only? I have a table that stores incidents (incident_id is the PK) and another table that stores the people that are involved in an incident.
    Incident_table
    (incident_id number PK);
    Incident_people_table
    (incident_id number PK/FK,
    person_id number PK);
    Now in a report, I need to return the multiple rows of the Incident_People_table as a single string separated by a comma, for example, 'Ben, John, Mark'. I asked the SQL Server DBA about this and he told me he can do that in SQL Server by using a variable in the sql statement and SQL Server will auomatically iterate the rows and concatenate the result (I have not seen his actual work). Is there a similar way in Oracle? I have seen some examples here for some similar requests using the sys_connect_by_path, but I wonder if it is feasible in a report sql that is already rather complex. Or should I just stick to my simpler funcion?
    Thanks.
    Ben

    Hi,
    May be, this example will help you.
    SQL> CREATE TABLE Incident_Table(
      2    incident_id number
      3  );
    Table created.
    SQL> CREATE TABLE Person_Table(
      2    person_id number,
      3    person_name VARCHAR2(200)
      4  );
    Table created.
    SQL> CREATE TABLE Incident_People_Table(
      2    incident_id number,
      3    person_id number
      4  );
    Table created.
    SQL> SELECT * FROM Incident_Table;
    INCIDENT_ID
              1
              2
    SQL> SELECT * FROM Person_Table;
    PERSON_ID PERSON_NAME
             1 John
             2 Mark
             3 Ben
             4 Sam
    SQL> SELECT * FROM Incident_People_Table;
    INCIDENT_ID  PERSON_ID
              1          1
              1          2
              1          3
              2          1
              2          2
              2          4
    6 rows selected.
    SQL> SELECT IT.*,
      2    (
      3      WITH People_Order AS (
      4        SELECT IPT.incident_id, person_id, PT.person_name,
      5          ROW_NUMBER() OVER (PARTITION BY IPT.incident_id ORDER BY PT.person_name) AS Order_Num,
      6          COUNT(*) OVER (PARTITION BY IPT.incident_id) AS incident_people_cnt
      7        FROM Incident_People_Table IPT
      8          JOIN Person_Table PT USING(person_id)
      9      )
    10      SELECT SUBSTR(SYS_CONNECT_BY_PATH(PO.person_name, ', '), 3) AS incident_people_list
    11      FROM (SELECT * FROM People_Order PO WHERE PO.incident_id = IT.incident_id) PO
    12      WHERE PO.incident_people_cnt = LEVEL
    13      START WITH PO.Order_Num = 1
    14      CONNECT BY PRIOR PO.Order_Num = PO.Order_Num - 1
    15    ) AS incident_people_list
    16  FROM Incident_Table IT
    17  ;
    INCIDENT_ID INCIDENT_PEOPLE_LIST
              1 Ben, John, Mark
              2 John, Mark, SamRegards,
    Dima

  • Custom row-fetch and how to get column values from specific row of report

    Hi -- I have a case where a table's primary key has more than 3 columns. My report on the
    table has links that send the user to a single-row DML form, but of course the automatic
    fetch won't work because 1) I can't set more than 3 item values in the link and 2) the
    auto fetch only handles 2 PK columns.
    1)
    I have written a custom fetch (not sure it's the most elegant, see second question) that is working
    for 3 or few PK columns (it references the 1-3 item values set in the link), but when there are
    more than 3, I don't know how to get the remaining PK column values for the specific row that was
    selected in the report. How can I access that row's report column values? I'll be doing it from the
    form page, not the report page. (I think... unless you have another suggestion.)
    2)
    My custom fetch... I just worked something out on my own, having no idea how this is typically
    done. For each dependent item (database column) in the form, I have a source of PL/SQL
    function that queries the table for the column in question, using the primary key values. It works
    beautifully, though is just a touch slow on my prototype table, which has 21 columns. Is there
    a way to manually construct the fetch statement once for the whole form, and have APEX be smart
    about what items get what
    return values, so that I don't have to write PL/SQL for every item? Because my query data sources
    are sometimes in remote databases, I have to write manual fetch and dml anyway. Just would like
    to streamline the process.
    Thanks,
    Carol

    HI Andy -- Well, I'd love it if this worked, but I'm unsure how to implement it.
    It seems I can't put this process in the results page (the page w/ the link, that has multiple report rows), because the link for the row will completely bypass any after-submit processes, won't it? I've tried this in other conditions; I thought the link went directly to the linked-to page.
    And, from the test of your suggestion that I've tried, it's not working in the form that allows a single row edit. I tried putting this manually-created fetch into a before header process, and it seems to do nothing (even with a hard-coded PK value, just to test it out). In addition, I'm not sure how, from this page, the process could identify the correct PK values from the report page, unless it can know something about the row that was selected by clicking on the link. It could work if all the PK columns in my edit form could be set by the report link, but sometimes I have up to 5 pk columns.
    Maybe part of the problem is something to do with the source type I have for each of the form items. With my first manual fetch process, they were all pl/sql functions. Not sure what would be appropriate if I can somehow do this with a single (page level?) process.
    Maybe I'm making this too hard?
    Thanks,
    Carol

Maybe you are looking for