Multiple sender one receiver

Hi Experts,
I have a scenario  where i have two senders and one receiver.My requirement is to change the file name when i place it in target.
Say
i have file name Jan_Target1(month is changing) in source 1.
and Jan_Target2(month is changing) in source 2.  both file at different locations.
For source i have created two channels and i am picking it using *.txt.
in target i need to ignore the month  and place the files as Target1.txt and Target2.txt
i created a mappping and i am trying to use a UDF to get and overwrite the file name using dynamic configuration.
I have cheked the File name in adapter specific msg attribute in both sender and reciver side.
But the same source file name is coming at target The udf is not getting executed to overwrite the file name.
But it is not working out :(.
The input file is not having any DT created, its just pick and place scenario as the structure for it is not defined.
Request experts to let me know how to overwite the file name.
Thanks ,
Anika

hi siva,
Thanks for your reply
i tried without selecting the filename in the adapter specific msg attribute for receiver.To my knowledge it is essential to check filename attribute for sender adapter otherwise the dynamic configuration for geting file name will not work.
i am not getting the filename in the pay load.
is there any other way to get a part of file name( substring of file name) and based on that can we name the file for the target.Eg if input files are  A_123.txt and B_345.txt ,the target shd contain 123.txt and 345.txt.
Regards,
Anika

Similar Messages

  • How do setup multiple send and receive domain on single virtual ironport?

    HI all
    how do i setup multiple send and receive domain on single virtual ironport?
    Daemien

    Please use the admin guide to assist you for setup/configuration:
    http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa8-0/user_guide/ESA_8-0-1_User_Guide.pdf
    On the VESA - the Recipient Access Table (RAT) will control which domains your appliance accepts for.  
    AsyncOS uses a Recipient Access Table (RAT) for each public listener to manage accept and reject actions for recipient addresses. Recipent addresses include these:
    •Domains
    •Email addresses
    •Groups of email addresses
    This is covered in detail in the "Overview of Accepting or Rejecting Connections Based on the Recipient’s Address" section.
    Please see the "Configuring the Gateway to Receive Email" section for configuration of appliance for domains.
    Please see the "Defining Which Hosts Are Allowed to Connect Using the Host Access Table (HAT)" section for configuration of appliance for sending.
    I hope this helps!
    -Robert
    (*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

  • Multiple Senders - One receiver

    I have a scenario where in there will be SOAP message comming in from multiple sender systems. The message format is same. Each one can be distinguished by plant code on the message.I have to load these messages into SAP R/3 using a RFC Adapter.
    Is there a possibility in XI that we can define multiple senders (as we can define multiple receiver determination based on condition).
    If BPM is the only way to resolve this, can somebody eloborate on the steps needed to be configured in BPM.
    Thanks.

    normally the sender service and interface is listed in the receiver determination so there would be one per sender that means even in your case multiple receiver determinations. However you can also use a wildcard (*) as sender in the receiver determination, than you can handle all your senders via one receiver determination.
    What you than have to make sure is, that you have one SOAP Channel per sender, so you can create one sender agreement per sender. Multiple sender agreements for one channel are not possible.

  • Reg N sender 1 receiver scenario

    Hi Experts,
    i have one basic doubt ,is it possible to have a scenario with multiple senders and one receiver without using BPM in a single interface..
    Say  we have a common sender  structure for all N system. and one sender message interface,MM,IM  and which can be resused  by all the system.
    Regards,
    srinivas

    Hi all,
    i did an extensive search in sdn.closing this thread. Below are the useful links for the same topics.
    using wild card char * may be a bit risky as multiple interfaces might be runnig for the same receiver, would prefer a simple BPM, rest depends on the requirement.
    Multiple Senders - One receiver
    Regarding Multiple senders to single receiver
    Multiple Senders on A2A
    How can i have multiple Sender agreements in a single interface suggested not to use wild card "*" instead create 3 receiver determination with same channel
    Multiple Senders to Inbound Proxy Scenario
    Multiple  sender file may be useful.
    Having multiple sender components send to one receiver component ?
    WSDL based on multiple sender interfaces: Re: WSDL based on multiple sender interfaces   Very helpful
    Approach for Multiple Sender? links
    Multiple Sender to one Receiver links
    Regarding Senders And Receivers
    regards,
    srinivas

  • Need to use only one sender and receiver communication channel.

    Hello Experts.
    I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
    For Eg;
    Sender                              
    D://dir1/file1 --->                  E://dir1/File1
    F://dir2/file2 ---->                 G://dir2/file2
    H://dir3/file3----->                 I://dir3/file3.
    Can this be achieved by using pass through scenario?
    Please let me know if the requirement is not clear.     
    Thanks in advance.
    Advit Ramesh

    Hi Advit,
    I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
    For Polling from multiple directories:
    http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
    Dynamic Configuration:
    Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki

  • Is there a way to send and receive SMS on multiple cellular devices without using iMessage?

    I currently own a cellular iPad mini and an iPhone 4s and would like SMS to be the same on both devices as well as my desktop.
    After many months of struggling with iMessage, I decided to turn it off entirely.  I discovered that my best friend did not receive dozens of my texts over the span of a few months (I compared our message history side by side).  Seems like it had something to do with traveling in and out of wifi zones or possibly conflicts between our two carriers, ATT and Verizon.  Regardless, I am not willing to dive into iMessage fully until this gets sorted out.  Further, SMS is the standard message format for everyone outside of the Apple sphere, and I do not feel comfortable lumping them together into one app.  If I decide to switch to Android, will all of my contacts with iPhones continue sending me iMessages?
    Thank you for your help!

    Is there a way to send and receive SMS on multiple cellular devices without using iMessage?
    Search the iTunes App Store for any 3rd party SMS apps that may be available.
    If I decide to switch to Android, will all of my contacts with iPhones continue sending me iMessages?
    Android phones don't receive iMessages, they can recieve SMS messages sent through the iOS Messages app. The app that your contacts choose to use to send you messages is completely up to them.

  • Sending mail with multiple dest., one is rejected - mail is rejected, why?

    Hello,
    I have a problem with my messaging server, while sending mails to multiple users, and one of them does not exist or is overquota.
    If one of the recipients gets rejected (email address does not exists or is overquota), the email is rejected (type J register) and no one receive it.
    any idea why messaging is doing this?
    The queue i'm using is configured like this:
    tcp_intranet notices 3 smtp nomx backoff "pt5m" "pt10m" "pt30m" subdirs 50 maxjobs 20 pool TCP_INTRANET_POOL recipient
    limit 256 maytlsserver maysaslserver allowswitchchannel saslswitchchannel tcp_auth identnone noexquota
    tcp_intranet-daemonand the version of messaging
    imsimta version
    Sun Java(tm) System Messaging Server 6.2-4.03 (built Sep 22 2005)
    libimta.so 6.2-4.03 (built 04:14:30, Sep 22 2005)
    SunOS smtp07 5.9 Generic_118559-28 i86pc i386 i86pc
    root@smtp:/var/opt/SUNWmsgsr/config > thanks in advance
    Xavier

    xavierm wrote:
    If one of the recipients gets rejected (email address does not exists or is overquota), the email is rejected (type J register) and no one receive it.If an individual email account is overquota or an email address doesn't exist, only that RCPT TO: attempt for that individual address will be rejected -- this does not mean the email cannot be delivered to the valid recipients.
    It is up to the email client to determine how an individual rejected recipient address is handled, i.e. should it continue sending the email or give up and alert the user.
    any idea why messaging is doing this?This is how all efficient email servers operate. What is the email client that you are using to send the email?
    The queue i'm using is configured like this:
    tcp_intranet notices 3 smtp nomx backoff "pt5m" "pt10m" "pt30m" subdirs 50 maxjobs 20 pool TCP_INTRANET_POOL recipient
    limit 256 maytlsserver maysaslserver allowswitchchannel saslswitchchannel tcp_auth identnone noexquota
    tcp_intranet-daemon
    The noexquota option does nothing on Sun Messaging Server:
    "Note that these options have no effect on delivery to Messaging Server mailboxes on any platform. "
    http://msg.wikidoc.info/index.php/Exquota%2C_noexquota%2C_holdexquota_Channel_Options
    You may however want to try the acceptalladdresses channel option:
    http://msg.wikidoc.info/index.php/Acceptalladdresses%2C_acceptvalidaddresses_Channel_Options
    Regards,
    Shane.

  • Multiple sender agreements mean multiple receiver detr??

    I have several JMS Channels that will be process thru one BPM.  Is there a way to combine the JMS Channels into one or several
    Sender Agreements / Receiver determination?  Or will multiple Config's be required?
    Thank you.

    Parimala,
    <i>Would I need 70 receiver determination records?</i>
    Unfortunately you will have to do that
    Reason: Receiver Determination is associated with SENDER INTERFACE and as you have 70 SENDER INETRAFCES / 70 SENDER AGREEMENTS, you wil have to have 70 receiver determination.
    Just look into the possiblity of cutting down on the number of Communication Channels and cominbing all 70 comm channels into a lesser number.
    Regards,
    Bhavesh

  • TS2755 I have 3 phones on one Icloud account. It has been this way for over a year with no issues. After and update on of the lines started getting text messages from all 3 phones. We fixed the send and receive and it was fixed. It is doing it again.

    I have 3 phones on one Icloud account. They have been this way for over a year. After an update last week one of the phones started getting messages for all of the other lines. We fixed this under the send and receive under settings. It was fine for a few days. Suddenly it started happening again. Yesterday after two hours on the phone I changed my apple id and it is still happening. Before that Verizon had told me to turn off my imessage when that happened I could not get any texts at all from other Iphone users.

    Make 3 different iCloud accounts and use ONLY for iMessage.   That will permanently fix your issue.

  • My wife and I share the same email address and Apple ID.  We are not able to send and receive Text Messages to one another.

    My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another. Is the cause of this because we share the same Apple ID? Will we have to set up 2 separate primary email addresses to be able to  send and receive Tex Messages to one another? Like I said, we share the same email address and woul like to keep it that way to keep up with our email together. Is there a way to by-pass having to set up 2 primary emaill addresses if this is the problem?
    Thanks.

    go to the settings and turn off imessage
    but that don't change the issue that you will never be able to facetime eachtoher
    the appleID is really meant as the handle that identify you it was not meant to be shared
    but can see that people may want to do not buy apps more then once

  • Brand New Iphone 5c can't send or receive text messages of any kind!? I've tried everything, why does no one have a solution for this? There's no way we're keeping a phone that can't even perform one of it's most basic functions. Help!

    Got the new Iphone 5c from Verizon today and was really happy with the phone until we realized it is unable to send or recieve text messages AT ALL. We've tried everything, searched the internet for hours, I've tried live chatting with Verizon and Apple ALL DAY and somehow keep getting "disconnected" even though my internet is working perfectly. The phone is pretty much useless if it's unable to perform one of it's main functions and it's really dissapointing to add a line, get the phone, only to discover a major problem with seemingly no solution whatsoever. Is there any fix for this? Because a phone that is incapable of sending or receiving a simple SMS message is pretty much useless. It's too bad too because I really love the phone if not for that. Does anyone have a legitimate way to solve this problem? We've done everything, network resets, turning imessaging on and off, factory reset, etc. etc. etc. and nothing works. Please help.

        Hello Idkallday!
    I know your device sends and receives text messages! Let's get to work on this! Did you port your service from another carrier, or is this a new number? Is your previous device still powered on?
    I also want to ask if you are able to use iMessaging, and if you see any error message when sending?
    Please test it by sending a message to your own mobile number, and keep us posted!
    ChristinaB_VZW
    Follow us on Twitter @VZWSupport

  • Processing the multiple sender xml one by one in a time gap to RFC

    Dear Experts,
             I have to process the multiple sender xml file one by one from FTP to RFC in time gap.
    For Ex:
            I will place 10 xml file in a FTP path at a  time, PI is picking 10 file at a time and process it to RFC at a time.
    Any other way to process the multiple file one by one through PI in a time gap to RFC
    (i,e) PI needs to process the 10 files one by one, once the first file processed successfully from FTP to RFC then the next file to process in a time gap to avoid getting the error in RFC.
    Kindly suggest your ideas or share some links how to process this multiple files.
    Best Regards,
    Monikandan.

    Hi Monikandan,
    You can use CE BPM with PI 7.1 But first check the suggestion of Anupam in the below thread:
    reading file sequentially from FTP using SAP PI file adapter
    Regards,
    Nabendu.

  • Iphone 4s i have made my update to ios 7.04 and when i send are receive a message text are a call of one of my contact, the contact is automaticaly deleted !!! Somebody know why ita frustrating

    Iphone 4s i have made my update to ios 7.04 and when i send are receive a message text are a call of one of my contact, the contact is automaticaly deleted !!! Somebody know why ita frustrating

    Post in your native language, the above makes no sense.

  • Multiple receiver with Multiple sender

    Hi,
    scenario : 2 idoc to file and email
      I have a requirement that I will be receiving 2 idocs and then I have a condition via correlation and if the condtion is satisfied i will be sending the file to both file and the mail adapter but if the conditionis failed i wll be sending the file only to mail adapter.
      Please let me for this scenario how many receiver determination, interface determination and receiver agreement required.
    Regards,
    Dhill

    Hi,
    You would require following:
    1. Receiver and Interface Determination :  R/3 --> BPM
    2. Receiver and Interface Determination : BPM --> file, Mail
          This depends on the way you design BPM.
           If you choose to set context in BPM on condition , you would require one Receiver Determination with conditions in ID  
    Or you can have two different interfaces in BPM for file amd mail and you would require two receiver determinations
    3. Receiver Agreement for file and Idoc
    Thanks,
    Beena.

  • My iMessage number has a +1 under send and receive listed infront of it.  Under settings/phone there is no plus one under "my number" does this matter? I have verizon.

    My iMessage number has a +1 under send and receive listed infront of it.  Under settings/phone there is no plus one under "my number" does this matter? I have verizon.

    Hey brianfromcharlton,
    Thanks for the question. If I understand correctly, you have a phone number linked to iMessage and the phone number has a +1 in front of it. I would recommend that you read this article, it may be able to help the issue.
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
    Sign in to an Apple ID on your iPhone. You will see all addresses verified with the account.
    Tap an address to enable it on the device. The telephone number will be dimmed when you view these settings on an iPhone.
    Thanks for using Apple Support Communities.
    Have a good one,
    Mario

Maybe you are looking for

  • OPEN GR AND IR

    Hi Pls suggest, how to know which are the po's are open for Migo and open  for Miro.

  • Log file

    Dears, Running finance module using dac. this task has been failed. log file for your reference. DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP]. DIRECTOR> VAR_27028 Use override value [ORA_R1213] for

  • Multiple JRun connector clusters on the same servers?

    I am trying to set up 2 clusters of jrun instances on the same set of 4 servers. Let's call them 192.168.246.1, 192.168.246.2, 192.168.246.3, 192.168.246.4. Each jrun server has 2 instances, instance_[n]_a and instance_[n]_b, where [n] is the last bi

  • IMac and Airport Express

    I just purchased Airport Express and now my IMac is WI Fi. I've noticed that it comes on even though I have not tried to wake it up. Does this mean I need to turn the machine completely off when I'm done? I prefer to leave it in a sleep mode since I'

  • I had created a new icloud id. Now i dont remember my email id for password reset.

    i had created a new icloud id. Now i dont remember my email id for password reset. The icloud id has not been verified yet. The verification email link is also not working. Can someone suggest me how to recover my account.