Multiple SUs specifing different link types consuming same service

Consider, SU1 and SU2 are deployed in C1 as part of SA1 and SA2 respectively.
SU1 consumes S1,E1,"hard"
SU2 consumes S1,E1,"soft"
Now, C1 creates a ME specifying Address=<S1,E1> . The NMR doesn't know if C1
is "working on behalf of" SU1 or SU2. How does it then decide what value of
Link Type to use for routing the ME?
[SU=Service Unit; C=Component; SA=Service Assembly; S=Service Name; E=Endpoint N
ame; ME=Message Exchange]

I've run this past the reference implementation team, since they are the experts in these types of JBI behaviours. My previous answer wasn't quite right.
The RI will accept a link-type only for connections that have no previous like-types associated with them. An attempt to change an already defined link type results in the new link type being rejected.
If the SU associated with an accepted link-type definition is stopped, the link-type definition is erased.
Generally, component configuration management tools should be aware that the presence of multiple type definitions of the same connection indicates problems with the tool. Connection types should be consistent across the component., regardless of which SU is responsible for using the connection.

Similar Messages

  • Can we have different output types for same document?

    Hi,
    Can we have different output types for same doucument.if yes plz describe the steps to perform it
    Thanks

    Hi,
    Generally you can use same out put type for the different document types of PO. You can create different out put types for the same PO, in case you need different layouts that is different forms like MEDRUCK. Please refer below link to create out types . If you want that PO as fax or e-mail can use same out put type .Thanking you.
    http://www.sap-img.com/materials/purchasing-tips.htm

  • Explain me briefly about evaluation order.As per my knowledge it show data type order.but I have different data type in same diemension ex:account- acc_001 is smart list data type.account-ac_002 is percentage.So fot this i will accont dim in evaluation or

    Explain me briefly about evaluation order.As per my knowledge it show data type order.but I have different data type in same dimension ex:account->acc_001 is smart list data type.account-ac_002 is percentage.So fot this i will accont dim in evaluation order.What going can any one explaining brifly ?

    2786712 wrote:
    thanks John for reply.If you dont mine can you explain clearly with example and screenshot.
    @John: You got a task
    Here you go: Hyperion Planning and More...

  • Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

    Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

    is this a windows in bootcamp question ?

  • Need help with different link styles on same page

    Hello,
    I'm using Dreamweaver CS4 on a PC.
    I have searched through a lot of posts over the last couple of days, I've tried the projectseven.com tutorial, google'd, etc. but still can't figure it out.....
    All I want to do is apply a different link colour to some links in the footer of my page. Elsewhere through the site I have set the colour to blue (for the link) and orange (for the hover) - for the footer links I want the link to be white and the hover colour to stay orange.
    The problem with the projectseven tutorial is that it doesn't seem to apply to CS4 and I kept getting error messages when trying to apply a new CSS rule - there's no Class|Tag|Advanced options as per the instructions ....
    I've copied the code of my page to this. The links which I want to apply a different style to are contained in the Div Tag called "Footer-Navigation-Bar" .
    Could someone please give me some instructions or point me in the right direction please??
    Many thanks,
    Vickie
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <!-- saved from url=(0014)about:internet -->
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <!-- TemplateBeginEditable name="doctitle" -->
    <title>Subscribe to Family Australia - it's free!</title>
    <!-- TemplateEndEditable -->
    <link href="../family-subscribe.css" rel="stylesheet" type="text/css" />
    <script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
    <link href="../SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
    <!-- TemplateBeginEditable name="head" -->
    <!-- TemplateEndEditable -->
    <style type="text/css">
    <!--
    a:link {
    color: #30C;
    text-decoration: none;
    a:hover {
    color: #F30;
    text-decoration: none;
    a:visited {
    text-decoration: none;
    a:active {
    text-decoration: none;
    -->
    </style></head>
    <body>
    <div id="container">
      <div id="banner">
        <ul id="family-subscribe-menu" class="MenuBarHorizontal">
          <li><a href="../index.html">Home</a>      </li>
          <li><a href="../subscribe.html">Subscribe</a></li>
          <li><a href="../family-advertise.html">Advertise</a>      </li>
          <li><a href="../family-articles.html">Articles</a></li>
    <li><a href="../family-sign-in.html">Issues</a></li>
          <li><a href="../family-contribute.html">Contribute</a></li>
    <li><a href="../family-contact.html">Contact</a></li>
        </ul>
    </div>
        <div id="sidebar"><a href="../family-sign-in.html"><img src="../images/launch-issue.jpg" alt="launch-issue" width="220" height="380" hspace="4" /></a>
          <div id="sidebar-image2">
            <p><img src="../images/Sleeping bag for web.jpg" width="220" height="151" alt="sleeping-bag" /></p>
            <p>Kozy Koala™ Pillow Sleeper is ideal for those  summer nights when the kids want to sleep out or when you go camping. The  all-in-one pillow camper consists of …. [MORE]</p>
          </div>
          <div id="sidebar-image3">
            <p><img src="../images/solrx for web.jpg" width="220" height="164" alt="sunscreen" /></p>
          SolRX® Sunscreens are very sweat and water  resistant – ideal for anyone who leads an active outdoor lifestyle … whether  you’re in the water or not! [MORE]</div>
      </div>
        <!-- TemplateBeginEditable name="main-content-region" -->
        <div id="main-content">main content</div>
        <!-- TemplateEndEditable -->
      <div id="footer">
    <div id="footer-navigation-bar"><a href="../family-about.html">about</a> | <a href="../family-advertise.html">advertise</a> | <a href="../family-contribute.html">contribute</a> | <a href="../family-contact.html">contact</a> | <a href="../family-unsubscribe.html">unsubscribe</a></div>
          <div id="footer-text">Family Australia | ABN 33150685385 | For all advertising enquiries please contact <a href="mailto:[email protected]">[email protected]</a><br />
    Copyright © 2010 Family Australia. All rights reserved.
    </div>
      </div>
      </div>
    </div>
    <script type="text/javascript">
    <!--
    var MenuBar1 = new Spry.Widget.MenuBar("family-subscribe-menu", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
    //-->
    </script>
    </body>
    </html>

    The links which I want to apply a different style to are contained in the Div Tag called "Footer-Navigation-Bar" .
    a:link {
    color: #30C;
    text-decoration: none;
    a:hover {
    color: #F30;
    text-decoration: none;
    a:visited {
    text-decoration: none;
    a:active {
    text-decoration: none;
    Hello
    You can see above the CSS that applies to your links.  If you have links that you want to style in a diferent way, just write the rule Like this:
    #Footer-Navigation-Bar a:link {
    color: red;
    text-decoration: none;
    Or whatever.  There are other ways but this will do you as you already have those links you want styled differently in a div with its own ID.  The new rule should come after the other rules in your CSS I think to make sure of the cascade although thinking about it,  there's something called specificity in CSS which means that the rule that I suggest will win out anyway.  All that you are doing in my suggestion is selecting the a:link that is a descendant of an element with that particular ID.
    I hope that helps.  I'm a bit of a novice and might have got a bit jumbled with the cascade/specficity thing but hey, I reckon that will get you where you want to go....
    Martin.

  • Different valuation types with same vendor

    Hi,
    I have a senario as follows:
    I am procuring a material say HNB1084 ( Fuel pump ) from a Vendor V1.
    The HNB1084 can be supplied at two states superfinish & Standard buffing.
    The cost of superfinish is Rs. 150/- whereas that of standard buffing is Rs.100/-
    We dont want to have two different part number for this case.
    So we had configured the split valuation in such a manner that the super finish with valuation type V1 & the Standard buffing with valuation type V2.
    Now my problem is how to maintain info records for this sceario with the same material, vendor but with different valuation type.
    Pl expedite.
    Regards,
    R. Dillibabu.

    Manish,
    Are you sure that we can create two different inforecord for the different valuation type? The reason for my concern is we can create only one inforecord for Material , vendor and pur org combination.
    As I know, we can put only one valuation type in Pur org data.
    Regards,
    Arif Mansuri

  • How to backup multiple iphones with different iCloud accounts but same apple id?

    I would like to back up 3 idevices each with different icloud accounts to itunes. But they use the same apple id so that itune purchases can be installed on each device (2 iphones and 1 ipad).
    All I want to do is create a backup in case the phones need to be restored. I also want to back up before downloading iOS 8.
    The Macbook Pro that I will back up to has one user and one itunes library.
    Is this possible without mixing up address books and contacts etc? Appreciate if some one could direct me to detail step-by-step instructions if they exist or please tell me how I can do this.
    Thanks.

    With Family Sharing they don't need to have the same Apple ID anymore.
    But backups to iTunes are kept separate among multiple devices; Apple ID and iCloud isn't involved at all. Just make sure the devices do not have the same name.

  • Managing multiple libraries with different file types (AAC v. Lossless)

    I have set up two libraries, one for my AAC music and the other for my lossless music. The files themselves are located in two separate places on my hard drive. When I switch libraries (option-clicking iTunes), and go to Preferences/Advanced tab, the directory for the files and the import method doesn't change -- I have to change it manually. This is annoying.
    Does anyone know of a way to automate this change, so that if I open a new library, the default location of the files and the import format changes automatically? I tried ituneslibrarymanager from Dougscripts, but for some reason can't get this program to install on my machine.

    No, it's the same Windows XP user account, but I have two separate music libraries - the music files in library are in a lossless format, while those in the other are in AAC. For convenience, I wish to keep the two libraries separate.
    In iTunes 7 it is possible to have separate libraries - start iTunes and hold down the SHIFT key (Windows) while the program starts. A dialogue box then appears where the required library can be selected. However, as far as I can tell, it's not possible to have a different set of preferences for each library.
    Say the preferences are set up for my lossless library, which is located on a separate network drive. If I then make the AAC library active and open iTunes, iTunes reindexes the library according to the settings for the lossless library and I end up with the AAC library full of lossless files. I've tried unchecking various things in the preferences box, but I've had no luck fixing the problem. Thanks for your suggestion - I have already reported the problem.
    The whole thing is a rather inelegant way of managing multiple libraries in iTunes. Surely the Apple developers can come up with a way of doing it from within iTunes??

  • GATP/ATP Check for Different Order Types for same material

    Hi :
    I have a material code X for which 2 different type of Sales Order (Say A and B )needs to be created.
    For Sales Order Type A the atp check needs to be done in APO through GATP for material code X.
    For Sales Order Type B the atp check needs to be done in SAP R/3 ECC 6.0 through availabilty check functionality for same material code X.
    It is not possible to create seperate material codes to carry out atp/gatp check seperately in R/3 and in APO.
    In real time the atp and cumulative atp position should be same in R/3 and in APO.
    Please let me know solution for this issue.
    With Regards
    Ashish Gupta

    Hi Ashish,
    Can you share with us as to how you were able to solve this issue. I have a similar issue like yours and I am totally clueless as to what needs to be done..
    My scenario goes this way:
    I have to modify the Schedule line dates for a GATP material according to a newly created date which I calculate based on the Route Schedule id (VL51, VL52) and display the same in the Sales Order schedule line items.
    Also can I get a new set of schedule line dates from the APO system for a date which I calculate based on the Goods Issue date - VALW-AULWE in any exit using a FM or a BAPI?? so that I can get these dates and populate the same in the Sales Order Schedule line??
    Thanks in advance,
    Susanth

  • APP - F110 - Payment of multiple invoices with different document type

    Hi
    Vendor X has been assigned with payment method same with two document types. One document type got 4 invoices and other document type got 1 invoice.
    During payment run (F110) for each document type, the system picked up both the document type but listed them as two separate lines in the proposal list. When we process the payment the system also created two payment documents.
    Is there a way for these two document types to be processed as a single proposal and payment.
    Any suggestion how can we process these invoices together in a single proposal/payment document?
    Thanks & Regards,
    Sam

    Thanks

  • How do I view multiple images from different projects at the same time?

    Hello
    I've been trying to find the answer in the user manual, but no luck so far.
    I did find how to open 2 projects at once, but I can only see one image at a time in the viewer and I have to keep going back and forth between projects to compare images. (These are scans of old photos and I want to eliminate the ones that are poorer quality, so need to compare numerous images from 2 sets of scans)
    How can I view an image from one project at the same time as an image from another? I know that it can be done in the same project by apple-clicking the second, third etc image, but this doesn't work if the images are from different projects.
    Thank you
    Elizabeth

    Thank you again Tony
    I've now created an album, independent of the projects, and dragged test images into it and it does just the job I needed. Now i just need to keep my brain sorted with which ones are which while i'm working
    Elizabeth

  • Perdiem calculations for multiple locations with different statutory types

    Dear Experts,
    As part of the perdiem calculations, when an employee selected different statutory trip types for different dates in a trip duration,perdiem to be calculated differently.But i am failing to calculate to such type of perdiems.
    For Example :
    Trip duration is, say from 01.05.2014 to 10.05.2014
    Statutory trip types X with amount 200/day, Y with amount 300/day
    When employee select the statutory trip type for  01.05.2014 to 05.05.2014 as X
    and for 06.05.2014 to 10.05.2014 as Y
    As per the scenario
    01.05.2014 to 05.05.2014 (5 days *200) =1000
    06.05.2014 to 10.05.2014 (5 days *300) =1500
    total perdiem amount to be 2500 for the total trip duration
    But my system considering last statutory trip type in calculating total perdiem as 3000 for the entire trip.
    Please provide your suggestions to meet the requirement mentioned above
    Thanks & Regards,
    Y.V.P.Deepak

    Hi Deepak
    Kindly mark correct  if  your question has been solved .
    For your next query , you can post it another post.
    To  post in Fi with amount split , you can work on another badi: TRIP_POST_FI
    There  you can make lot of changes before you post in FI
    Thanks
    Anwar Hossain

  • Starting multiple queries in different modules at the same time

    Hi @ all,
    i´ve built a forms mdi application with forms 10g (10.1.2.3).
    When I open a form (from the menu form) and start a database query the whole mdi application is blocked until the query finishes.
    Is there a way to avoid blocking the whole application so that i am able to start another form and do some work while the other running module is still querying (Maybe starting each module in its own (java) thread).
    Thank you,
    Thomas

    Non-blocking cannot be set programatically. Plus, it only gives you the option to cancel the query, not open another form. From the Help:
    Interaction Mode property
    Specifies the interaction mode for the form module. Interaction mode dictates how a user can interact with a form during a query. If Interaction Mode is set to Blocking, then users are prevented from resizing or otherwise interacting with the form until the records for a query are fetched from the database. If set to Non-Blocking, then end users can interact with the form while records are being fetched.
    Non-blocking interaction mode is useful if you expect the query will be time-consuming and you want the user to be able to interrupt or cancel the query. In this mode, the Forms runtime will display a dialog that allows the user to cancel the query.
    You cannot set the interaction mode programmatically, however, you can obtain the interaction mode programmatically using the GET_FORM_PROPERTY built-in.

  • Multiple Thunderbird in different OS's on same computer to access Profile on common logical drive

    I installed Windows 8.1 as a alternate OS on a machine that already has Windows 7 (and Thunderbird). The hard drive is partitioned and the T'Bird Profile files are on another logical drive accessible to both OS's with the same drive designation.
    I've run into two problems:
    1. While the new Win 8.1 installation of T'Bird sees all of the mail folders and messages (and can get new messages from this POP3 account, this setup does not see the address books also within that same profile, and
    2. It does not successfully send SMTP (even with the same account settings.
    With respect to the last, I recall from working with T'Bird and its predecessor that the SMTP password was set upon initial use, but never again appeared for any editing purposes; the only time it showed up was when creating a new SMTP source. In this case, I don't see where I can re-enter the SMTP password. And, I did try creating a new SMTP setup, but it didn't help. I entered the correct password, but it was not successful. Any ideas on how I can get this set up?
    With the Address Books, even though this new T'Bird installation knows where the Profile is (as evidenced by the fact that it does see the mail folders and messages), it doesn't see the Address Books. Again, I don't see where there is the setting for the Address Book(s) location. I looked for the familiar file that tells the program where to find everything else, but I couldn't find it in this new Win 8.1 installation.
    Any ideas on these two issues would be greatly appreciated!

    I finally found the answer. I was able to unhide the Users folder in Win 8.1. I simply copied the Thunderbird folders from the Win 7 Users\''UserName''\AppData\Local and Users\''UserName''\AppData\Roaming folders to the same location on the 8.1 Users folder.
    As soon as I did that, and rebooted, my SMTP was fixed, and all of the address books were available. (And of course, it still works in the Win 7 world, too.)
    From what I can glean the data in these folders tell Thunderbird key information no covered by the Folder setting option in the program itself.
    I don't know if copying those folders is what 3rd party vendors promise in assisting with relocating existing setups, but it should.
    To recap, I am trying out Win 8.1 on the same computer as an pre-existing Win7. I wanted to use my same familiar programs, obviously including Thunderbird, with the same setup and access to the same mail and address books located on a common additional logical drive.
    Copying those folders to the new OS, as well as pointing the new program installation to the existing T'bird Profile accomplished it all.

  • Different display types in same column

    Hi All,
    I though I was being clever, but maybe not...
    I have a query which generates a column. I want the column to show a select list from query when the user has update permission for the row, otherwise I want to show the value of the column only.
    The code for the column is something like this:
    select
    case when mycolumn='myval'
    then apex_item.select_list_from_query('blah, blah')
    else
    mycolumn
    end multitype_column
    This displays the data fine - when the data is editable a select list is displayed, otherwise just the value of the data is displayed. The Tabular Form Element of the Column Attribute for this column is 'Standard Report Column'.
    My problem is this:
    If the first row of the report doesN'T return a select_list for 'mycolumn', I can't get a return value (the index for the select list (where it exists) is F22) from any of the rows which do appear as select lists.
    If however the first row is a select list, i can interrogate apex_application.g_f22(i) and retrieve a value for all rows (again where the select_list exists).
    So - firstly is this a correct interpretation? Secondly - any fixes?
    Thanks very much
    Toby
    Message was edited by:
    TAP - changed does to doesN'T - hopefully this was understood

    Thanks for replying.
    Here is the pertinent code. g_04 represents the database field I examine in order to determine whether the select_list_from_query or a straight report value is rendered. I'm asserting that if the first row of the report has '0' in g_04 then I can see all the values in g_f22 for the page. If the first row g_04 is not '0', I can't access g_f22 for any row (even when I can see values in Firefox->Tools->PageInfo->Forms)
    DECLARE
       v_selected_UserID        varchar2(1000);
       v_figref                 varchar2(1000);
       v_selected_wr            varchar2(1000);
       v_item_id                varchar2(1000);
       v_session_fcs            varchar2(1000);
       v_FIGSTAT                varchar2(1) ;
       v_WR_raw                 varchar2(1000);
       l_cks                    varchar2 (1000) ;
       slovs                    varchar2 (1000) ;
       current_work_request_id  varchar2 (1000) ;
       current_reserved_by      varchar2 (1000) ;
       current_revision_status  varchar2 (1) ;
       dbref                    varchar2 (1000) ;
       gf21_count               number ;
       i                        number :=0 ;
    BEGIN
         FOR i IN 1 .. apex_application.g_f21.COUNT /*g_f21 is the user field - always a select list */
       LOOP
       v_selected_UserID        :='';
       v_figref                 :='';
       v_selected_wr            :='';
       v_item_id                :='';
       v_session_fcs            :='';
       v_FIGSTAT                :='';
       v_WR_raw                 :='';
       current_work_request_id  :='';
       current_reserved_by      :='';
       current_revision_status  :='';
          v_selected_UserID     :=   apex_application.g_f21(i); /*USER ID */
          v_figref                      :=   apex_application.g_f01(i); /*Figure Ref */
          v_WR_raw                :=   apex_application.g_f04(i) ; /* Raw Work request ID */
          /*Check if already reserved by examining raw work request ID (g_04)- if so g_f22 will not exist */
          if  v_WR_raw = '0'
          then
            v_selected_wr :=  apex_application.g_f22(i);
            insert into test_table (f1) values ('select list present') ;
            commit;
         else
            v_selected_wr :=  apex_application.g_f04(i);
            insert into test_table (f1) values ('select list not present') ;
            commit;
          end if ;                            
       END LOOP;
    END;

Maybe you are looking for