Multiple values for a field

Hi All,
In the vendor repository, i have fields like Phone No, Fax Number, Email addresss which should hold multiple values. i.e One vendor may have have multiple phone no's or email address. How should this be managed. Is it by the Qualifier table or how ? Because i dont want to have Phone No 1, Phone No 2 etc .
Thanks in Advance !

In the scenario you mention (the Vendor repository), both the Phone Number and Fax Number fields are links to corresponding Qualified Lookup tables. These are inherently multi-value fields.
Just for the sake of clarity - with the exception of Measurement type fields, it is only lookup fields that can be set to have multiple values. Refer to the matrix <a href="http://help.sap.com/saphelp_mdm550/helpdata/en/1f/2ddb4203d82b78e10000000a155106/content.htm">here</a>.
Mark

Similar Messages

Multiple values for single field

hi
In order to upload Purchase order details, how you handle multiple values for a single field?
Eg: Item field may contain no. of values for a record

Hi,
It is generally taken care using BDC's by Table Control, and if you are using BAPI's then there are tables for ITEMS.
Regards,
Atish

Enter multiple values for a field in dialog programming

I need to enter multiple values for some of the fields in screen , which screen element do i use for this or is there any other way of doing it?

That would be a table control. In this you can enter multiple values for multiple fields.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac5e35c111d1829f0000e829fbfe/content.htm
Thanks,
SKJ

Read Internal Table based on Multiple Values for Key Field

Hi Gurus,
i have one query can you tell me how read an internal table it_kna1 for multiple values of land1 DE US IND etc.
i had tried as below but i could not can you try and let me knwo at the earliest.
here i want read the values with DE or US and want further prosess them.
REPORT YC001.
tables kna1.
select-options: cust for kna1-kunnr.
data: begin of it_kna1 occurs 0,
 kunnr like kna1-kunnr,
 name1 like kna1-name1,
 land1 like kna1-land1,
 end of it_kna1.
select kunnr name1 land1 into table it_kna1 from kna1 where kunnr in cust.
read table it_kna1 with key land1 = ( 'DE' OR 'US' ) .
can anybody suggest me some solution.
Thanks,
Jeevi.

This should be what you need:
REPORT ztest NO STANDARD PAGE HEADING LINE-SIZE 80 MESSAGE-ID 00.
TABLES kna1.
SELECT-OPTIONS: cust FOR kna1-kunnr.
DATA: BEGIN OF it_kna1 OCCURS 0,
 kunnr LIKE kna1-kunnr,
 name1 LIKE kna1-name1,
 land1 LIKE kna1-land1,
 END OF it_kna1.
DATA: itab_index LIKE sy-tabix.
SELECT kunnr name1 land1
INTO TABLE it_kna1
FROM kna1
WHERE kunnr IN cust.
SORT it_kna1 BY land1.
READ TABLE it_kna1 WITH KEY
land1 = 'DE'
BINARY SEARCH.
itab_index = sy-tabix.
WHILE sy-subrc = 0.
itab_index = itab_index + 1.
WRITE: /001 it_kna1-kunnr, it_kna1-land1, it_kna1-name1.
READ TABLE it_kna1 INDEX itab_index.
IF it_kna1-land1 <> 'DE'.
 sy-subrc = 99.
ENDIF.
ENDWHILE.
SKIP 1.
READ TABLE it_kna1 WITH KEY
land1 = 'US'
BINARY SEARCH.
itab_index = sy-tabix.
WHILE sy-subrc = 0.
itab_index = itab_index + 1.
WRITE: /001 it_kna1-kunnr, it_kna1-land1, it_kna1-name1.
READ TABLE it_kna1 INDEX itab_index.
IF it_kna1-land1 <> 'US'.
 sy-subrc = 99.
ENDIF.
ENDWHILE.
Rob

Multiple records to be created for multiple values in a field

I am having a requirement in which i will have multiple values for a field.The values are seperated by commas.I need a record to be created for each value.(eg: if there are 4 values i need 4 records to be created). Any one please help me out.

Hi !
You can try solve it at File Content Conversion level, by specifing your value separator as the endSeparator.
Or you can import all values as a unique record and then solve it via graphical mapping, using an advanced UDF, where you receive N records, then inside the UDF, you split the values via its separator and create new array values (one for each input value after splitting) and output that array to be used to fill destination structure.
Regards,
Matias.

Passing multiple values for a single field in URL to call sap Transaction

Hi All,
I need to pass multiple values for a single field to SAP transaction .
means if i have say a field "Date" which can contain more than one value, but its not a range which has two fields . How is it possible.
Let me know pls.
Regards,
Sirisha.R.S.

Hi Satyajit,
I need to call a transaction with multiple values which gives me the report based on those values.
So I need to pass multiple values for a single parameter.
I hope u got it.
Regards,
Sirisha.R.S.

Got multiple values for non null local custom field

Hi,
I get the following error message while saving a MPP from Project Professional to MS Project Server:
Got multiple values for non null local custom field.
I checked the MPP and found that there are fields with same alias as Enterprise field names. However, these fields are at a Task level, whereas the Enterprise fields are at a Project Level.
I would like to know why this is happening and the resolution for this issue. I don't want to delete the local fields.
Any help in this regard will be appreciated.

Then try to find any inconsistencies in the project plans with the issues, like required values not entered. Also try to save the plan as XML format and save it back as an mpp file to see if it helps (be aware that any formatting will be lost).
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

Multiple writers for a field

I get an error indicating that i have multiple writers for a field table_a.item_key. I have 3 classes that use this field as shown below.
@Entity @Inheritance(strategy=InheritanceType.SINGLE_TABLE) ...
@Table(name="table_a")
@DiscriminatorColumn(name="item_Type")
abstract class A {
@Id, @Column(name="item_key")
public String getItemKey(){
@Inheritance(discriminatorValue="B")
class B extends A {
@OneToOne
@JoinColumn(name="item_key", updatable=false, insertable=false)
public C getC(){
@Entity
@Table(name="table_c")
class C {
@Id, @Column(name="item_key")
public String getItemKey(){
Note that when i remove the relationship between B and C everything works fine. It looks like TopLink gets confused when a one-to-one relationship is mapped on a column used for another field.

In the scenario you mention (the Vendor repository), both the Phone Number and Fax Number fields are links to corresponding Qualified Lookup tables. These are inherently multi-value fields.
Just for the sake of clarity - with the exception of Measurement type fields, it is only lookup fields that can be set to have multiple values. Refer to the matrix <a href="http://help.sap.com/saphelp_mdm550/helpdata/en/1f/2ddb4203d82b78e10000000a155106/content.htm">here</a>.
Mark

Multiple values for Commodity Code/Import code number for Foreign Trade

Hi Experts,
Is it possible to enter the multiple values for Commodity Code/Import code number for Foreign Trade field for plant/country specific data in transaction MM02 using any BADI/User Exit ? If yes, suggest the name of the BADI/User Exit
Thanks,
Narayan

how can one material in one plant have 2 commodity codes? This is not logical.

How to passing multiple values for a parameter of discoverer(url parameters

Hi All,
I am trying to pass multiple values for a parameter of disco report. I am trying to include my url for discoverer viewer report. the values has the following
'jeff,mark'
'sfophiee,angela'
Thanks and Regards
Venkat

Hello Venkat,
I know there are some problems with 10.1.2.0.2, maybe if you haven't done yet you can try with 10.1.2.2, assuming this version should be working for multiple parameter values :
OracleAS Discoverer 10.1.2.2 is installed with the following patch :
Patch 4960210 PLACEHOLDER BUG FOR AS/DS 10G R2 PATCH SET 2 10.1.2.2
So, once installed you can try adding your parameter as param_<parameter_name>='sfophiee,angela'
Hope this helps, otherwise feel free to log a Service Request to Support.
Best Regards,
Gianluca

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

Default value for a field in Purchase order

I want that while creating purchase order system should suggest one value for the field ' prior vendor ' in retail tab. I don't want to use user exit. Can anybody help?

Hi,
if that button is clicked then give the values in the work area of table control and then append it to the table control
in pai of the screen.
if r_rad eq 'X'.
fs_tab = ur value.
append fs_tab to it_tab.
endif.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 13, 2008 3:39 PM

How to set a new value for formula field in crystal reports xi?

How to set a new value for formula field in crystal reports xi?//formula{@description} exemplo in VB6crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" orcrxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"How to in JRC? 

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

HOW TO SET A DEAFULT VALUE FOR A FIELD?

hi friends
i have doubt..how to set a default value for a field..say like in local printer field i always want lp01 to be displayed defaultly..when i click F1 in that field i get the parameter id ..i know there is something dealt with that parameter id..how can i set that default value ..in the case of the default printer value i made in own data settings as lp01 but how to do it normally for other field which has parameter id ??????
thanks and regards
prince

Hi Prince,
u can set the default value in abap as given below
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
PARAMETERS : S_BUKRS TYPE BSID-BUKRS OBLIGATORY DEFAULT '1000'.
PARAMETERS : S_BELNR TYPE BELNR_D OBLIGATORY DEFAULT '1600000070'.
PARAMETERS : S_GJAHR TYPE GJAHR OBLIGATORY DEFAULT '2008'.
PARAMETERS : ASON TYPE BUDAT OBLIGATORY DEFAULT SY-DATUM.
PARAMETERS : S_KUNNR TYPE KUNNR MODIF ID GP1.
PARAMETERS : S_LIFNR TYPE LIFNR MODIF ID GP2.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN : END OF BLOCK B1.
or
u can give the default value in INITIALIZATION also.
vlue = '1000'.

Multiple values for a field

Similar Messages

Maybe you are looking for