Must Web Dynpro execute in EP?

hi there, can i use the Web Dynpro framework to develop browser-based application, executing in the SAP application server?
In other words, my Web Dynpro created application can run in SAP AS without SAP enterprise portal.
Or, do i have to execute Web Dynpro in SAP EP?
- Daniel Koch
Standard Bank of South Africa

Hi,
from a technical point Web Dynpro is independent from the SAP Enterprise Portal - the only thing you need is J2EE 6.40 engine.
But putting your Web Dynpro applications into the portal you win of course a lot of new features like the role-based access to your applications.
You can easily navigate between different applications located on different portal pages and applications, running on the same portal page could use the portal eventing to communicate and to share data.
The portal allows you also very easily to put together your Web Dynpro applications with all other applications you have implemented in the past.
Best regards
Jochen
PS: Using Web Dynpro it is not only possible to develop browser-based applications. The Web Dynpro framework is totally client-independent. Therefore you do not have to change anything in your Web Dynpro application if you want to run your application in an smart client for example.

Similar Messages

  • Calling an Executable program in a Web dynpro

    Hi
    We would like to change the initial screen of one of our functionalities (kilometre claims), but the info after you submit the selection info does not need to change.  We have an executable program with the detail of the screen.
    I created a new Web dynpro application with the select options that must be entered; if you then click on a Submit button, I would like to call the current executable program, but I am not sure how I must do this.
    Example:
    To call a method, I always use: Call method ZCL_WD_PA=>ZHRPA_UPDATE_IT9004, but I am not sure how to call an executable program and with info is needed.
    Could anyone please assist?
    Regards
    Debbie

    Hi
    We have a functionality via Employee Self-Service (Portal ECC6) where an employee can view their Kilometre claimsin a Report format.
    To get the info to be displayed, someone else created a Program via the GUi SE38 (Attribute is an Executable program).  The front screen (selection screen) where the dates for which you would like to run the report for, needs to be changed.  It is not a nice screen to look at.  On that same screen which I would like to change, is a submit button.  If you click on that, it shows info and that info must not be changed at all.
    So I will also have a submit button on my new Web dynpro functionality where I am building hopefully a nicer selection screen.  I will also have a Submit button and I wanted to add something when clicking on this submit button to call the existing program that will show the info selected.
    Regards
    Debbie

  • I am getting a error while executing the Web Dynpro Application Page.

    Hi All,
    I am getting a Error while executing a web dynpro application ::: 
    : Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component: Z_WEP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
    I have checked this error description in ST22  :
    What happened?
        The exception 'CX_WDR_RT_EXCEPTION' was raised, but it was not caught anywhere
         along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program
         'CL_WDR_CLIENT_APPLICATION=====CP' has to be
        terminated.
    Error analysis
        An exception occurred which is explained in detail below.
        The exception, which is assigned to class 'CX_WDR_RT_EXCEPTION', was not caught
         and
        therefore caused a runtime error.
        The reason for the exception is:
        Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered. Component:
        Z_XXP_PERSONAL_DATA, View: OVERVIEW, Window: Z_XXP_PERSONAL_DATA
    Can u plz help me regarding this error.
    Thanks,
    Deepika

    >Navigation in Phase WDDOMODIFYVIEW Cannot Be Triggered
    Looks to me like you are trying to fire a navigation plug within WDDOMODIFYVIEW. According to the rules of the WD Phase Model this is not allowed.

  • How to execute a BI query/view from a web dynpro application?

    Hi all,
    I am trying to connect to a BI system from a Web Dynpro application. I have to execute a view/query and process the output in my application. Please guide me about how to establish the connection to the BI system from my web dynpro application and then execute the query/view.
    I have tried executing/modelling the BI query/view using Visual Composer but I get an error saying 'QueryView Instantiation failed' when I try to drag the view/query on to the design board.
    Please guide me and help me achieve this.
    Thanks & Regards,
    Kishan

    Hi Kishan,
    Define system for BI in portal and define JCo destination, then from WDJ application use can query BI.
    Create the Technical System and connect with JCO Destinations
    or
    Connecting through the BI Connecters (ex: XMLA Connecter)
    Refer below link:-
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1?quicklink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60f35908-ecd4-2910-6c89-e75e1054d9d1
    In this document you will get details related to connector and other admin activity.
    Hope this may help you.
    Deepak!!!

  • Execute BI Query in Web Dynpro Java

    Dear All,
    I have a requirement where i have to display of traffic light that sets its color based on the outcome of a SAP BEx query using Web Dynpro Java.
    Please explain me the steps how to retrieve and execute the SAP BEx query  using WDJ.
    Thanks & Regards
    Rajeev

    Hi Rajeev
    You can refer to the following links :
    [How to execute a BI query/view from a web dynpro application?]
    [How to send query parameters using BIApplicationFrame]
    Regards,
    Sayan Ghosh

  • Problem executing an Online Form in Web DynPro(Adobe Form)

    Gurus,
    I am trying to create an Online Form in Web DynPro(Adobe Form), i could successfully create the form and deploy it.
    But when i executed, i am getting the below error.
    <<
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception during a "UsageRights" operation.
    Request start time: Thu May 18 16:31:04 CEST 2006
    com.adobe.ProcessingError: Error while retrieving a password for credential: ReaderRights:
    java.lang.Exception: Could not retrieve a password for credential: ReaderRights
         at com.sap.tc.webdynpro.clientserver.adobe.AdobeFormHelper.createPDFDocumentForUIElement(AdobeFormHelper.java:420)
    >>
    Any Help would highly be appreciated
    Regards,
    Arvind Kugasia

    Hello  Markus,
    let's say I have two systems. One - X - installed J2EE+ABAP and configured WD pdfobject WS proxy to point to second system - Y - with correctly configured ADS (inculding Redaer Rights Credential). Do I have to setup this Reader Rights Credentila also on system X ?? Do I have to setup something else on system X to work with Interactive forms in WD Java on system X ?
    PS: Our ABAP calls from X to ADS on Y are working okay, but I didn't try WD ABAP as basis is too low.
    Thanx, Richard.
    Message was edited by:
            Richard Calaba

  • Error executing Webservice for Process Start via Web Dynpro

    Hi Community,
    I have a strange issue when executing a webservice that starts a process using web Dynpro. I have configured, the Service Group, the Communication profile.
    When I try to execute the Service via Web Dynpro, I get the following exception which is in my opinion fully missleading and does not make sense to me. As the Authentication Profile and the Communication profile allow the same Authentication Methods.
    com.sap.esi.esp.lib.mm.config.exceptions.TechnicalException: Failed to create Logical Port for Service Reference with id [YourID here].
    Reason for the failure is that no one of the following Authentication Methods [None], [SAP Logon Ticket], or [SAML Assertion] is allowed in the related Communication Profile.
    Such an Authentication Method is needed as the Authenticaton Profile is [businessOrTechnicalUser] and no User Account is assigned, so the Authenticaton Profile is considered to be noAuthentication or businessUser.
    Related Communication Profile is [SAP_DEFAULT_PROFILE 1] and it allows Authentication Method(s) [User Name/Password (Basic), X.509 Client Certificate, SAP Logon Ticket, SAML Assertion, X.509 Certificate Doc.Auth., User Name/Password Doc.Auth.]
    Thanks for your support.
    Best Regards Nicolas

    Hi Nicolas,
    make sure you have
    - assigned a communication profile (with no- or basic authentication) to the provided service
    - created a provider system with a similar profile
    - assigned the provider system to the (consumer) service group
    For a full guide on service configuration please check this article:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40dabb46-dd66-2b10-1a9a-81aa620098b3
    Best Regards,
    Christian

  • Problem in executing the external webservice in a web dynpro java

    Hi,
    I have imported the Adaptive Web Service Model in web dynpro application and while executing the model, I am receiving the following error,
    Exception when retrieving the WS invoker using the execution destination
    I have tested the webservice in ws navigator which works fine.
    I have defined the destinations under destination management template of SOA.
    If anyone has encountered and solved this problem, please advise.
    Thanks,
    Appachi

    Hi Robin,
    Yes I have defined the stack trace and have defined the system & host name in configuring the destinations.
    Yes, I have given HTTP authentication to webservice.
    Advise me if anymore configurations have to be done.
    Thanks,
    Appachi

  • Web Dynpro iView  fail to execute on portal side

    Hi Gurus
    I have Created Web Dynpro Application in Backend ( ECC ).
    If i tested them from SICF transaction or SE80 transaction they are working fine.
    Now on Portal side, I hav created Web Dynpro iView for Those ICF Services (Web Dynpro Apllications).
    But most of time they Fails to execute from Portal side.
    Symptoms :
    On Browser Status Bar It keep on refreshing that iView address.
    and Nothing comes on O/P side.
    What culde be the Problem ?
    How To resolve !!
    Thanks & Regards
    PK

    This regularly happens to us with new WDA applications - seems to be a "bug".
    Deactivate the service in SICF and reactivate it, then try your iView again.
    If that doesn't work, deactivate the whole WebDynpro node in SICF and reactivate it (including all relevant sub nodes & services).
    Pretty sure that will fix it.

  • Getting Error while test executing the Web-Dynpro object.

    Hi All,,,,,,,,
    I am new to Web-dynpro and this is my 1st demo application.
    Application simply contains two Views : First used to submit a field which is collected in the second view for display.
    While test runnning the application as: Web Dynpro_Component -> Create -> Web Dynpro Application, I am giving the Plug name as 'DEFAULT'.
    While testng the Web-Dynpro I get the error : Starter Plug DEFAULT does not exist..
    Please suggest what is to be done.
    Thanks in Advance........
    Abhi..........

    Hi Sharma,
                         When u created a Web Dynpro Application , In Properties tab of the application,mention the view that displays,when application starts. Coming to the View ,make sure that In Bound Plugs of that view is having plugname DEFAULT  as  startup plug.

  • Uncaught exception while executing web dynpro application

    Hello all,
    I'm getting run time error exception CX_WDR_RR_EXCEPTION not caught when running web dynpro application
    The error analysis shows the custom component is locked by the user and cannot be regenerated. But I checked in SM12 for locked entries and component was not listed there.
    The program terminated in the include LWDR_RUNTIME_REPOSITORYF12
    Please suggest how to resolve the isse?
    Regards,
    anil

    Hi Anil,
    I'm also getting the same run time error. When I try to activate the Web Dynpro component, I'm getting error that the component is locked by the user.
    Please let me know how you solved this issue.
    Thanks in advance for the quick response.
    Thanks & Regards,
    Jay

  • Exception not caught while executing web dynpro application

    Hello all,
    I'm getting run time error exception CX_WDR_RR_EXCEPTION not caught when running web dynpro application
    The error analysis shows the custom component is locked by the user and cannot be regenerated. But I checked in SM12 for locked entries and component was not listed there.
    The program terminated in the include LWDR_RUNTIME_REPOSITORYF12
    Please suggest how to resolve the isse?
    Regards,
    anil

    sorry...posted in wrong forum...

  • Uncaught exception when executing web dynpro application

    Hello all,
    I'm getting run time error exception CX_WDR_RR_EXCEPTION not caught when running web dynpro application
    The error analysis shows the custom component is locked by the user and cannot be regenerated. But I checked in SM12 for locked entries and component was not listed there.
    The program terminated in the include LWDR_RUNTIME_REPOSITORYF12
    Please suggest how to resolve the isse?
    Regards,
    anil

    Dear Anil,
    What type of WD is it ?
    Do you get the error when you trigger some sort of event ?
    Is it when first launch the WD ?
    Can you be more specific and share with us the code where this is dumping ?
    You can also check this link
    [CX_WDR_RT_EXCEPTION' - How to catch it?;
    Kind Regards
    /Ricardo Quintas

  • Executing macro in web dynpro

    hi
    i am able to pass data in excel.
    now for this data ,i have created a macro which create a
    graph as result.
    problem is how to call this macro in web dynpro.
    please help me this.

    Hallo Jagannatha,
    the new table feature is available in SAP NetWeaver 7.0 EhP2 (SAP ERP 6.0 EhP5, SAP Business Suite 7i2010) named 'TableMultiEditorCell'. See [SAP Online Help|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/9b/46bb0d339b42cc8d30636ca0c9f5b6/frameset.htm] for more details ...
    "This UI element is a table cell variant that enables several UI elements to be placed in one table cell. This type of cell can be used for "one click actions". ...
    Regards, Bertram

  • How to configure SSO for web dynpro ABAP (not web dynpro Java)

    Hi Experts,
        I am testing SSO in IDES for web dynpro ABAP (Not for web dynpro Java / not for portal). When I am entering url of web dynpro application in web browser like internet explorer, then it should ask for user id and password first time, after login whenever user would access that url, it must not ask for user ID and password (url would be access web browser in mobile). For this I select to configure single sign-on for web dynpro ABAP. I have done below works:
    1). I have created a web dynpro application having url: http://susws076.sap.swk:<port>/sap/bc/webdynpro/sap/zadb_hello_world2
    2). I run TCode SICF and access service node to "Zadb_hello_world2". Double click on it, hit change. pressed "logon data" tab, select "Alternative logon
         procedure"
       Then deleted all logon procedure other than "SSO Authentication" and saved.
    3). Go to "STRUST" and create certificate, choosed "Environment==> Logon Ticket" fill the required parameters and execute. It is OK (no red traffic
         signal).
    4). Execute TCode "RZ10" to change profile parameter, insert new parameter (indicated by red arrow)
    After all this settings I opened a browser enter above URL and hit enter but there is an error
    There is no login page. It directly showed this error page. No cookies is saving.
    Can anyone tell me what all the settings/configuration other than this I have to do. And is there any wrong setting done by me?
    How to set the for single sign-on?
    Thanks in Advance
    Regards
    Piyush

    Hi Piyush,
    Pls refer below links,
    Single Sign On with ABAP WebDynpro
    http://help.sap.com/saphelp_nw70ehp2/helpdata/en/5e/6c85c3edf942f39349a1e337434d29/content.htm
    Regards
    K.N

Maybe you are looking for