My 3210 will not print in pink/magenta. photos and other pictures print in green tones.
my 3210 will not print in pink/magenta. photos and other pictures print in green tones. i've seen posts clear back from 2011 with no replies or solutions. if this is hp's definition of product support, i will be sure to choose a different manufacturer when purchasing my next printer ... which will be SOON.
Hello @justjen ,
Welcome to the HP forums.
I understand that your Photosmart 3210 stopped printing magenta.
I would like to help.
Try going through the steps in the following document.
Printed Colors Are Not the Colors Expected
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Similar Messages
-
My Ipad2 will not sync with music or photos and keeps timing out
I Have just bought an ipad2, I have downloaded the latest version of iTunes but i cannot sync correctly. The music is displayed in light grey font but with no album art and will not play. The photo albums are listed but with no photos inside. Do you have any answers to this? Help please.
Have you selected the content to sync to your iPad in your sync settings in iTunes. The content that you want to transfer must be selected (checked or "ticked") to sync out will not transfer when you sync.
For instance - if you want to sync music....
Connect the iPad to the computer and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on the albums or playlists that you want to sync - or the entire library if you like.
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
This applies to all content that you want to transfer from iTunes to your iPad. Make the selections in the appropriate tabs in the iTunes window on the right. -
my home button was not working and I was in my settings looking for the advert touch or whatever it is called and my phone went completely black. al the buttons worked such as screen shotting (it made the sound) and turning on my ringer, the screen just didn't respond. I left it alone and plugged in over night and it hasn't done anything different. I also plugged it into my computer and it still did nothing. what can I do to resolve this problem?
Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281 -
Acrobat on OSX does not use printer preset. Every single time I have to print I have to click printer and then print to load the preset and then click print again from the main dialog. I am printing to a Xerox that has the copier code in the preset so if I don't do this it will not print. This has been broken for in every version I have tried. This extra clicks are taking years off my life. Did I remember to do the extra clicks? I don't know, I guess I will run down the hall and check. Please fix this.
What operating system are you running? I assume they had you install the latest BIOS. True? If it were mine, I would suggest forcing it to use integrated graphics (in the BIOS) to rule out a problem with the NVidia driver.
-
I am making my first keynote presentation. I transferred the slides from a power point. I did not use a 'theme' from keynote. Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu. What have I done wrong
When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works. -
I am trying to access tax forms from the IRS. I download them to my comuter and they read fine (version XI). However, when iItry to open them on another computer (version 4) they will not open. Version 4 opens all other pdf documents fine, just not the ones from the IRS. Any ideas?
Version 4 is oh so old.
The IRS and many other providers of forms are using products like LIveCycle which require at least version 7.05.
Saving, Filling, and Printing PDF Files
We use Adobe Acrobat PDF files as a means to electronically provide forms & publications. You will need to have the Adobe Reader software installed to access them (available FREE from the Adobe Reader download page on Adobe's Web site). We recommend using the most recent version of Adobe Reader. -
please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.
Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H. -
I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
I have been working on a wedding slideshow for days and have over 3,000 pictures in albums on iPhoto. It suddenly will not open without upgrading to Aperture and I can't find any of my photos!!!! I need these photos, to complete the video, not to mention I don't want to lose them. I have had trouble ever since upgrading to Maverick.
Try the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
2 - Run Option #4, Rebuild Database. -
My Ipad1 will not update it starts to update and stops and gives me a code 28
Ipad will not update it starts to update and stops and gives me a code 28
Could be a hardware problem:
Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors. -
Working on a project with 5 movies at the same time andone movie project will not open I can see it and play it but can't open to work on it or share or copy it, what should I do?
WHat version of iMovie?
ANd for iPad or iPhone?
Are you having issues opening a video you took on the device?
OR an issue opening a project you previously created? -
My 5yr old iMac will not connect to the Internet. All other computers at home will, including my Mac Pro and iPad. I'm at my wits end. What should I do?
Which OS are you using (update your user profile).Try a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset. -
I have an iPod 4s and I am trying to update to IOS 6.1.6. I keep trying to download but it will not allow me to click download and install. I have checked my storage and I have more than enough storage space available. Do you guys have any suggestions?
The only available, signed, iOS, for your iPod, is iOS 7.1. That's why you can't install iOS 6.1.6.
-
I'm trying to downgrade my icloud storage; however, my MAC book will not upgrade pass 10.6.8 and I don't have my iphone anymore. If there another way for me to do this? I've tried everything I can find online and of course my coverage has expired and can't call the support team.
Hello Lara,
have you already called Apple and explained your current situation, because I don't see a way to downgrade your storage plan with a Mac only running Snow Leopard and without a iOS device running at least iOS 5.
Best regards. -
I have a purchased app that will not show up in the cloud and is no longer in the app store. Is there a way to get it from my iPhone to my iPad?
You should be able to copy it from your iPhone to your computer's iTunes via File > Devices > Transfer Purchases, and if it's compatible with your iPad you can then sync it to it
Maybe you are looking for
-
I'm running 10.6.8 Snow Leopard fine on my MacPro1,1, Dual-Core Intel Xeon, 2.66 GHz Mac, but I need to install Lion 10.7.0 to run a program I need.How do I install OS 10.7 NOT 10.7.5, because I get this message when I try to install 10.7.5, which I
-
How to run 3 operations through my USB-6210 at the same time w/o gettin an error
Hi, I am using a USB-6210 data logger from national instruments to collect data and run it through labview 7.1. However, when i try to run two labview files at the same time on two different channels in the data logger i get an error #50103 "The spe
-
ORA-06502: PL/SQL APEX 3.2 Upgrade problem
We have 2 APEX environments on our 2 servers. Both servers are running Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production. One server was running APEX 3.0.0.00.24 (or thereabouts) and was upgraded to 3.2.0.00.27. The other s
-
CE 7.1 - How to call CAF services from Web Dynpro
Hi, whats the suggested way to call caf services from web dynpro? Of course I can use the Web Service model. But can I call caf directly? I read something about caf web dynpro model, but I cannot find it in nwds 7.1. On some older tutorial it was in
-
Locating specific packages in .jar files
If I need to include a few optiona packages, javax.net.ssl.*, java.security.cert.*; how can you tell which jar file these are packaged in?