My computer will not let me open itunes at all. It tells me that the itunes library can not be read because it was created by a newer version of itunes. What to do? Please Help Me.

My Computer will not let me open itunes at all. It tells me that the itunes libary can not be read because it was created by a newer version.

If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!

Similar Messages

TS1717 While downloading the latest iTunes version, my computer turned off. When I opened iTunes, it says that "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" Help please :(

While downloading the latest iTunes version, my computer turned off. When I opened iTunes, it says that "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" Help please

That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Had to delete iTunes for computer repair. Downloaded new version 10. Would not open -Message: "iTunes Library.itl cannot be read because it was created by a newer version of iTunes"

After getting message below iTunes will not open- just disappears off screen.
Had to delete iTunes for computer repair. Downloaded new version 10. Would not open -Message: "iTunes Library.itl cannot be read because it was created by a newer version of iTunes"

Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2

My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!

See Empty/corrupt iTunes library after upgrade/crash.
tt2

Just downloaded itunes when i try to open itunes it keeps coming up itunes library itl cannot be read because it was created by a newer version of itunes please help!!!

just downloaded itunes when u try to open library keeps coming up itunes library itl cannot be read because it was created by a newer version of itunes,please help !!!

You posted in the iTunes for Mac forum, by the way.
Troubleshooting iTunes installation on Mac OS X - http://support.apple.com/kb/HT2311 - read section on Opening iTunes for information about running multiple copies of iTunes.

We have a Dell computer with iTunes (which we have had for years) and are suddenly unable to open it. The message: This file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help!!

We have a Dell computer with iTunes (which we have had for years) and are suddenly unable to open it. The message: This file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help!!

See Empty/corrupt iTunes library after upgrade/crash.
tt2

After I reinstall Itunes, the message read "the file iTunes Library.it cannot be read because it was created by a newer version of itunes, i have tried with iTunes version 11.1, 10.1 and 9.1 still come up with the same message and will not open iTunes

after I reinstall Itunes, the message read "the file iTunes Library.it cannot be read because it was created by a newer version of itunes, i have tried with iTunes version 11.1, 10.1 and 9.1 still come up with the same message and will not open iTunes

Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash

TS1717 My itunes won't open and I get message that says "The file iTunes library.itl cannot be read because it was created by a newer version of itunes." I am unsure what this means, but I have uninstalled and reinstalled the itunes, and it still will not

I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.

That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

My computer will no longer bring up itunes. It says, "file iTunes library.itl cannot be read because it was created by a newer version of itunes". I have reinstalled itunes, and still no luck. HELP!!!

I cannot bring up iTunes as it keeps saying, "the files 'itunes library.itl' cannot be read because it was created by a newer version of iTunes". I have reinstalled itunes, and still no luck. HELP!!!!

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

TS4123 I have used iTunes for awhile and now on my laptop when I try to open iTunes I get the following message. "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Any help or suggestions?

I am unable to open my iTunes on my Toshiba laptop. I keep getting an error message of "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. I don't have the problem on my iPhone though.
Any help or suggestions will be greatly appreciated.
Thank you

Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2

Was trying to update to latest version; i uninstall to download new version because it wasn't letting me update. Now it wouldn't open at all because "The file"iTunes.Library.itl"cannot be read because it was created by a newer version of iTunes".:( ?

I Was trying to update to the latest version; i uninstall to download new version because it wasn't letting me update. Now it wouldn't open at all because "The file"iTunes.Library.itl"cannot be read because it was created by a newer version of iTunes".:( How do i go back to last install or make this new version works?

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Hate iTunes 11. Reverted to old version. Now I get error msg when I open that says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes but won't open or play songs. HELP!!!!

Hate iTunes 11. Reverted to the old version. Now I get a msg when I click to open iTunes stating, "The file "iTunes Library.itl" cannot be read because it was created in a newer version of iTunes" and it will not open. HELP!! How can I revert the library as well?

I hate iTunes 11 too... and I also want to revert to previous version. But Apple seems to be so incredibly customer-friendly these days that is quite deliberately not publishing clear/simple revert instructions. I think it's a disgrace that Apple removed Cover Flow without warning people who are tempted to upgrade. Absolute disgrace. And now we're stuck with this piece of ..

HT203175 When I try to open itunes i get a message saying: File "iTunes library.itl" cannot be read because it was created by a newer version of itunes. Any help out there?

When I try to open itunes i get a message saying: File "iTunes library.itl" cannot be read because it was created by a newer version of itunes. And itunes will not start up. Any help out there?

Hi did you ever get a solution to this problem? Having the same issue myself!

TS1386 itunes will not launch in XP because: "itunes library.lit cannot be read because it was created by a newer version of itunes"

itunes will not launch in XP because: "itunes library.itl.cannot be read because it was created by a newer version of itunes"
Is this an apple problem or a computer problem? If I reinstall itunes will my library still be there?

Uninstall and reinstall the Apple software. See the following. That link also has a link for Win7 and Vista.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

"The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

"The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?

this just started w/ me yesterday. I was running 10.5.3, and nothing changed - the message just appeard out of nowhere. I update to the latest iTunes 10.6 but the message is the same.
Sounds like probably some sort of Library file corruption.
The two options available in the message box are "Download" and "Quit". Download is useless because I'm already running the latest. Quit is pretty useless.
I was going to just create a new Library and re-import all my music. Of course, all my iPhone sync settings are going go have to be recreated.

HT1768 I get a message "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." Please advise what I need to do to get around this issue - at the moment iTunes wont open up!

I get a message "The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." Please advise what I need to do to get around this issue - at the moment iTunes wont open up!

Hi did you ever get a solution to this problem? Having the same issue myself!

My computer will not let me open itunes at all. It tells me that the itunes library can not be read because it was created by a newer version of itunes. What to do? Please Help Me.

Similar Messages

Maybe you are looking for