My iPhone 4 (purchased 9 months ago) is suddenly not holding a charge though I did nothing to change the settings, and, in fact, have turned anything that could drain it off. It will go from 100% to 70% overnight.
Ny 9-month old iPhone 4 is suddenly not holding a charge. It was just fine before this, but now, for instance, it goes from 100% to 70% overnight. Although I had not changed any settings prior to this happening, I have now turned off notifications, location services, etc. to see if it makes any difference, but it doesn't.
You may have other things causing it if you have push notifications for email or other things making background data connections. Try putting the phone in airplane mode overnight and see if that makes any difference. If it does then it's a background application issue.
Similar Messages
-
A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
Thank you in advance,
SiHeroIf you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
If Verizon return it to Apple it wil not be handled by Apple
If Verizon also use unauthorised repairers you may be lucky
(Apple do not sell parts to local guys or anyone else ) -
Hi all
Apple charged me 8 times $1 while changing the country and purchase from app stores.
Help pls, I want my money backTo Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I had this problem: "cannot connect to itunes" while trying to download an app so i went to the settings and i kinda messed it up that now i have not apps or itunes icon on my ipad! can anyone help me?
First, try a reset: hold down the home button along with the power button until you see the Apple, then let go.
-
Everything else about my computer works fine, but I get a small
pop-up window in the bottom right asking if I want to allow some
kind of program access, and the options are 'allow always',
'allow once', or 'block.' I forgot that I lost access to MF and
had to call someone to help me change the settings a yr or so
ago. But I believe it was this same issue - when I re-booted the
settings took effect. What must I change in my settings? I
already deleted my MF profile.Has any had you try a reset yet? Sometimes the WiFi & Cellular anntennas get wacky.
Hold Sleep/Wak & Home buttons until the screen goes dark and you see the Apple logo -
i am new to mac book pro. i was checking out the settings and must have changed something as now when i log on, it shuts down within 10 seconds and i don't have time to get into the settings. the top tool bar is red/pink. please help!
Close all windows and quit all applications.
Hold the option key down and click the "Go" menu in the Finder menubar.
Select "Library" from the dropdown, then "Preferences" folder.
Look for these two files.
com.apple.desktop.plist
com.apple.systempreferences.plist
Right click each one of those and select " Move To Trash" from the contextual menu.
Restart the computer. -
Itunes will not open from my desk top. It just says "This version of Itunes has not been correctly localized for this language. Please run the English version". How can I change versions or whatever if unable to open at all? TIA
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now? -
How can I get the scroll to work?
Thanks for replying!
It's something else to try! I am quite savy, just frustrated over what should be a simple update!!!!!
I did however try and install iTunes 10.7 on a different computer, which is clean as I ran anitvirus on it this morning, prior to downloading itunessetup.exe and it did the same thing on there too.
Having spent nearly two days trawling the internet for help I am beginning to wonder if it is not a problem with 10.7 itself? Seems like quite a lot of people have the same issues as me....and it can't be the same thing on everyone's computer!
I will try the antivirus on my laptop and go from there!!!
Thanks again for your answer. -
I have a brand new Iphone 5c since like 2 weeks ans just today this happened, Cell is full charge everything is good i'm using it and then put it in my pocket for about 1hour and when I pick it out it don't work anymore !! the screen doesn't work like it lights up when I press on any button but I can't see nothing the screen stay black and I can't do my code to unlock it or even answer a phone call !!
You have voiceover on. First try tapping the home button three times fast to turn it off.
If it is still on the gestures are different. You tap once to choose an item then double tap the item to activate it. Remember everything that was one tap is now tap then double tap. Start with the lock screen. Tap, then double tap your code. Swipe with two fingers to open, if the screen doesn't slide with two fingers try using three.
Tap then double tap each of the following. Settings> general> accessibility> voiceover > off.
Good luck.
Edit. I'm not sure if you need two fingers to slide to unlock. Try with one finger. If that doesn't work try two. -
After setting up an "Exchange" mail account on my device, iPad/iPhone, it requires a new passcode to be set before data will be downloaded. I did this on the iPad and now have to enter that passcode everytime I turn it on. How do I avoid needing to enter a passcode on my iPhone everytime I turn it on?
The passcode is a requirement set by the administrator of the Exchange server you are connecting to.
It is purely for security purposes.
If you do not want the passcode, you must remove the Exchange account. There is no way around it. -
m i 5s d f a a 3 w i t o . c l a i c b i h a o w b s o d . i l i I a t r i s e. c b h m. i s d a l m p.
WHAT?
-
Just bought brand new new iMac. When browsing in Safari, sometimes the text suddenly gets super large. I'm doing nothing except reading the screen, tho I usually have my hand resting lightly on the mouse. I can get back to normal size by clicking "actual size" in View. But then it does it again a minute or two later. What gives? Something seems defective--but what?
From System Preferences, Mouse, Point & Click, Secondary click. Go to it hover over Secondary click and watch the short video sequence change it left right, left right, you will see exactly what is does. No I do not think your Mouse is defective, you simply need to take control of your Mouse finger.
-
"" does not appear to be a valid email address. Verify the address and try again.
I am getting this error whenever I copy an email address from somewhere and paste it into the 'To' field.
“” does not appear to be a valid email address. Verify the address and try again.
Whattup with that?
Only way to get around it seems to be either typing the whole address in (uh!) or clicking on the email address and letting Mail create the new message. Both are not the way I need to do things and it used to work perfectly in Snow Leopard, as would be expected for such a basic sort of command.I had the same problem with multiple adressess:
I used the " ; " as a seperator.
The message was sent with no trouble at all as soon as I used the " , " (comma) instead.
Hope this helps -
Why are my iPhone 4S photos 2592x1936 instead of 3264x2448? How do I change the settings?
No worries, have now found what I needed in notifications.
-
I have a early 2008 Macbook pro and just bought a new battery, but it is not holding a charge
I have a late 2008 Macbook pro and just bought a new battery, but it is not holding a charge. I read it may be the charger,
that sometimes is blank, but it does charge my computer.
Anything I can try?
I have updated to 10.9.2
Message was edited by: wplewisBring it back to the Apple store with your MBP and charger. If the battery is found to be defective, they should provide you with a replacement (assuming you are in the warranty period).
Ciao.
Maybe you are looking for
-
How to remove column name in select clause
Hello Guys, I just want to remove a column name in select clause. Because, I don't want to write all column names. I hope I express myself. In other words, I want the following. Select * - unwanted_column from table; instead of this Select col1, c
-
Problem on sending sms in jsp page
hi to all, i am using smslib for sending sms from pc to mobile.it work fine in all java file but when i implement in jsp file it gane me error of serial port that"port does not exist".how can i solve this problem... Edited by: kinjal on May 30, 2008
-
Menu exit for VA01/02/03
How to find the menu exit for VA01/02/03 transactions? Thanks Tharani
-
Regd : Integration Between Portal Layer And Process Layer
Hi Experts, I have a query regarding the integration between Portal layer and the process layer in CE. How does the interaction happens or what is the process behind the integration of these two layers. I was going through some help documents at h
-
I am using a few different spry menus on my webpage along with using a css flyout called p7express. When the flyout is active the spry overlaps it. Is there a way to set the spry to be transparent or move behind? This is what it looks like http://mom