My iPhone 5 is blocked and goes wrong with IOS 8.2.

My iPhone 5 is blocked and goes wrong with IOS 8.2. How can officially return to IOS 7.12?
The phone goes slow, hard contacts are loaded, the phone got stuck a few times.
I would like to return to the IOS 7.12, but can not. Problems have occurred since the IOS8, but I hoped to solve with iOS 8.1 or 8.2. On the contrary, the situation was worsened.
What can I do?

I have a 64GB model
Contacts are displayed harder. Not appear depending on usage, as IOS 7.
All functions of the smartphone go late.
Now I installed iOS 8.1 and did not improve anything
It happens rarely that's right, the smartphone to block everything and need to restart. But we claim that we have an Apple that should function without resets
I understand that the processor does not support well IOS8 iPhone 5, but I want to return to IOS 7 as the smartphone was perfect
Apple must know these problems and have to accept a return to IOS7 for iPhone 5
They were given a warning only 3, 3 g, 4, 4s
I have friends with iPhone 5 that meet the same problem and they will return to IOS7 if possible
I think that Apple has a problem in this regard
Another version of IOS 8 can not resolve the situation, because it seems that the processor can not handle this software
I would be very happy if Apple will understand the situation, and someone at Apple will give me an answer or a solution

Similar Messages

  • Why does my iphone says its blocked and nothing appears on the screen

    why does my iphone says its blocked and nothing appears on the screen

    Its completly black on the screen and there is a voice saying the screen is blocked nothing seems to work to put the screen on it asks for a code but i cant see any numbers on the screen

  • Why can't I send i-message and use facetime with my iphone 4s(BTW, there is nothing wrong with my apple account))

    Why can't I send i-message and use facetime with my iphone 4s(BTW, there is nothing wrong with my apple account))
    It functioned well originally, but a month ago I could not use facetime and send i-message anymore. I think there is nothing wrong with my apple ID because I can still download apps in apple store.

    Try turning both iMessages and Facetime off in SETTINGS then re-enable iMessages and then Facetime. See if that helps.

  • What is going wrong with this config ??

    Hello guys,
    I am busting my head to find out what is going wrong with this config and cant figure it out since i am not an advanced cisco technician.
    Problem is that i cant access the 94.70.142.127 server that is supposed to be in a DMZ zone.
    I know it is a bit chaotic but would really appreciate any help since i am running on a deadline.
    I am building the config step by step and although it seems to be working access to the server all of the sudden is denied.
    No idea if its a NAT issue a firewall issue or a security audit issue.
    There are 3 vlans.
    Vlan 1 is the inside network.
    Vlan 2 is the DMZ server
    Vlan 3 is the Management Network.
    thanks in advance
    Building configuration...
    Current configuration : 11796 bytes
    ! Last configuration change at 11:28:33 PCTime Fri Jan 4 2013 by admin
    ! NVRAM config last updated at 11:27:51 PCTime Fri Jan 4 2013 by admin
    version 12.4
    no service pad
    service tcp-keepalives-in
    service tcp-keepalives-out
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime
    service password-encryption
    service sequence-numbers
    hostname R1
    boot-start-marker
    boot-end-marker
    security authentication failure rate 3 log
    security passwords min-length 8
    logging message-counter syslog
    logging buffered 4096 informational
    enable secret 5 $1$oT7y$BwhdEjMJfAaTQI3dzDVwP.
    no aaa new-model
    memory-size iomem 10
    clock timezone PCTime 2
    clock summer-time PCTime date Mar 30 2003 3:00 Oct 26 2003 4:00
    crypto pki trustpoint TP-self-signed-2567543707
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-2567543707
    revocation-check none
    rsakeypair TP-self-signed-2567543707
    crypto pki certificate chain TP-self-signed-2567543707
    certificate self-signed 01
      30820244 308201AD A0030201 02020101 300D0609 2A864886 F70D0101 04050030
      31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 32353637 35343337 3037301E 170D3133 30313032 30383431
      35335A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
      4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 35363735
      34333730 3730819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
      8100ABA4 B7FFF4F1 9FBE79D8 2CEBCA68 A14BE3AB DBF770C2 EB35A954 B271AE3E
      F8485837 F2E8566B 66E5EF6B BCFCDFA3 8F6F91F3 FD8E3015 879A67F5 85DD95F5
      C26875C0 2202CA6C CE95888F 545AB4F6 6F708A0E C65E78D1 60967480 5589F5EE
      80505E46 8767CE2C 37C994FE AB555AF0 BA4C4679 63FF7641 34FFF6EF 3EC38006
      46B90203 010001A3 6C306A30 0F060355 1D130101 FF040530 030101FF 30170603
      551D1104 10300E82 0C52312E 646F636E 65742E67 72301F06 03551D23 04183016
      8014F0DE 85318FB3 70C36B4A FEB4B0CA 446025F0 329C301D 0603551D 0E041604
      14F0DE85 318FB370 C36B4AFE B4B0CA44 6025F032 9C300D06 092A8648 86F70D01
      01040500 03818100 5D76D5F4 5FB659C3 1E5B3777 420E1703 CD019889 AE79390D
      A2AA4D26 AD9913B4 B3292277 97ACACDD D7093465 78279B4D 5FAC0A21 EFBF3B74
      6A25BC5B ACFB648F 08F92678 00BB495C 037DEAF7 C5910944 3D2C0643 EA19E9BD
      0AFE5423 AADBB3C2 B2C94296 DABE0D3D 6438F7A8 32B0A92B 3E8E0D26 635070A3
      ACF87E49 65A9E468
          quit
    no ip source-route
    ip cef
    no ip bootp server
    ip domain name docnet.gr
    ip name-server 195.170.0.1
    no ipv6 cef
    username admin privilege 15 view root secret 5 $1$Lny5$et1FhWOpIKOOYRUtN89H10
    archive
    log config
      hidekeys
    ip tcp synwait-time 10
    ip ssh version 2
    class-map type inspect match-any WebService
    match protocol http
    match protocol https
    class-map type inspect match-all sdm-cls-sdm-pol-NATOutsideToInside-1-1
    match class-map WebService
    match access-group name WebServer
    class-map type inspect match-all ccp-cls-sdm-pol-NATOutsideToInside-1-1
    match access-group name Spoofing
    class-map type inspect match-any CCP-Voice-permit
    match protocol h323
    match protocol skinny
    match protocol sip
    class-map type inspect match-any tcp-udp
    match protocol http
    match protocol https
    match protocol dns
    match protocol icmp
    class-map type inspect match-all ccp-cls--3
    match access-group name mng-out
    match class-map tcp-udp
    class-map type inspect match-all ccp-cls--2
    match access-group name mng-self
    class-map type inspect match-all ccp-cls--4
    match access-group name mng-out-drop
    class-map type inspect match-any ccp-cls-insp-traffic
    match protocol cuseeme
    match protocol dns
    match protocol ftp
    match protocol h323
    match protocol https
    match protocol icmp
    match protocol imap
    match protocol pop3
    match protocol netshow
    match protocol shell
    match protocol realmedia
    match protocol rtsp
    match protocol smtp extended
    match protocol sql-net
    match protocol streamworks
    match protocol tftp
    match protocol vdolive
    match protocol tcp
    match protocol udp
    class-map type inspect match-all ccp-insp-traffic
    match class-map ccp-cls-insp-traffic
    class-map type inspect match-any http-https-DMZ
    match protocol http
    match protocol https
    class-map type inspect match-all sdm-cls--2
    match class-map http-https-DMZ
    match access-group name web_server
    class-map type inspect match-any MySQLService
    match protocol mysql
    class-map type inspect match-all sdm-cls--1
    match class-map MySQLService
    match access-group name DMZtoMySQL
    class-map type inspect match-any ccp-cls-icmp-access
    match protocol icmp
    match protocol tcp
    match protocol udp
    class-map type inspect match-all ccp-icmp-access
    match class-map ccp-cls-icmp-access
    class-map type inspect match-all ccp-invalid-src
    match access-group 100
    class-map type inspect match-all sdm-nat-https-1
    match access-group 102
    match protocol https
    class-map type inspect match-all ccp-protocol-http
    match protocol http
    policy-map type inspect ccp-permit-icmpreply
    class type inspect ccp-icmp-access
      inspect
    class class-default
      pass
    policy-map type inspect sdm-pol-NATOutsideToInside-1
    class type inspect ccp-cls-sdm-pol-NATOutsideToInside-1-1
      drop
    class type inspect sdm-cls-sdm-pol-NATOutsideToInside-1-1
      inspect
    class type inspect sdm-nat-https-1
      inspect
    class class-default
      drop
    policy-map type inspect ccp-inspect
    class type inspect ccp-invalid-src
      drop log
    class type inspect ccp-protocol-http
      inspect
    class type inspect ccp-insp-traffic
      inspect
    class type inspect CCP-Voice-permit
      inspect
    class class-default
      drop
    policy-map type inspect ccp-permit
    class class-default
      drop
    policy-map type inspect sdm-policy-sdm-cls--1
    class type inspect sdm-cls--1
      inspect
    class class-default
      drop
    policy-map type inspect ccp-policy-ccp-cls--1
    class class-default
      drop
    policy-map type inspect ccp-policy-ccp-cls--3
    class type inspect ccp-cls--3
      inspect
    class class-default
      drop
    policy-map type inspect sdm-policy-sdm-cls--2
    class type inspect sdm-cls--2
      inspect
    class class-default
      drop
    policy-map type inspect ccp-policy-ccp-cls--2
    class type inspect ccp-cls--2
      inspect
    class class-default
      drop
    policy-map type inspect ccp-policy-ccp-cls--5
    class class-default
      drop
    zone security out-zone
    zone security in-zone
    zone security dmz-zone
    zone security mng
    zone-pair security ccp-zp-self-out source self destination out-zone
    service-policy type inspect ccp-permit-icmpreply
    zone-pair security sdm-zp-NATOutsideToInside-1 source out-zone destination in-zone
    service-policy type inspect sdm-pol-NATOutsideToInside-1
    zone-pair security ccp-zp-in-out source in-zone destination out-zone
    service-policy type inspect ccp-inspect
    zone-pair security ccp-zp-out-self source out-zone destination self
    service-policy type inspect ccp-permit
    zone-pair security zp-dmz-to-outside source dmz-zone destination out-zone
    service-policy type inspect ccp-inspect
    zone-pair security zp-outside-to-dmz source out-zone destination dmz-zone
    service-policy type inspect sdm-pol-NATOutsideToInside-1
    zone-pair security sdm-zp-dmz-zone-in-zone source dmz-zone destination in-zone
    service-policy type inspect sdm-policy-sdm-cls--1
    zone-pair security sdm-zp-in-zone-dmz-zone source in-zone destination dmz-zone
    service-policy type inspect sdm-policy-sdm-cls--2
    zone-pair security sdm-zp-dmz-zone-self source dmz-zone destination self
    service-policy type inspect ccp-policy-ccp-cls--1
    zone-pair security sdm-zp-mng-self source mng destination self
    service-policy type inspect ccp-policy-ccp-cls--2
    zone-pair security sdm-zp-mng-out-zone source mng destination out-zone
    service-policy type inspect ccp-policy-ccp-cls--3
    zone-pair security sdm-zp-out-zone-mng source out-zone destination mng
    service-policy type inspect ccp-policy-ccp-cls--5
    interface Null0
    no ip unreachables
    interface BRI0
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    encapsulation hdlc
    shutdown
    isdn termination multidrop
    interface ATM0
    no ip address
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    no atm ilmi-keepalive
    interface ATM0.1 point-to-point
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    pvc 8/35
      pppoe-client dial-pool-number 1
    interface FastEthernet0
    interface FastEthernet1
    interface FastEthernet2
    switchport access vlan 3
    spanning-tree portfast
    interface FastEthernet3
    switchport access vlan 2
    interface Vlan1
    description $FW_INSIDE$
    ip address 192.168.0.1 255.255.255.0
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat inside
    ip virtual-reassembly
    zone-member security in-zone
    ip tcp adjust-mss 1412
    interface Vlan2
    description $FW_INSIDE$
    ip address 192.168.1.1 255.255.255.0
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat inside
    ip virtual-reassembly
    zone-member security dmz-zone
    interface Vlan3
    description $FW_INSIDE$
    ip address 10.0.10.1 255.255.255.0
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip flow ingress
    ip nat inside
    ip virtual-reassembly
    zone-member security mng
    interface Dialer0
    description $FW_OUTSIDE$
    ip address negotiated
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip mtu 1452
    ip flow ingress
    ip nat outside
    ip virtual-reassembly max-reassemblies 64
    zone-member security out-zone
    encapsulation ppp
    dialer pool 1
    dialer-group 1
    ppp authentication chap pap callin
    ppp chap hostname [email protected]
    ppp chap password 7 0918425001505245
    ppp pap sent-username [email protected] password 7 13511B4B1359417D
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 Dialer0
    ip route 10.0.10.0 255.255.255.0 Vlan3
    no ip http server
    ip http secure-server
    ip nat inside source list 1 interface Dialer0 overload
    ip nat inside source static 192.168.0.101 94.70.142.113
    ip nat inside source static 192.168.1.102 94.70.142.127
    ip access-list extended DMZtoMySQL
    remark CCP_ACL Category=128
    permit ip host 192.168.1.102 host 192.168.0.101
    ip access-list extended Spoofing
    remark CCP_ACL Category=128
    permit ip 10.0.0.0 0.255.255.255 any
    permit ip 192.168.0.0 0.0.255.255 any
    permit ip 172.16.0.0 0.15.255.255 any
    ip access-list extended VTY_incoming
    remark CCP_ACL Category=1
    permit ip host 10.0.10.2 any
    ip access-list extended WebServer
    remark CCP_ACL Category=128
    permit ip any host 192.168.1.102
    ip access-list extended mng-out
    remark CCP_ACL Category=128
    permit ip 10.0.10.0 0.0.0.255 any
    ip access-list extended mng-out-drop
    remark CCP_ACL Category=128
    permit ip any any
    ip access-list extended mng-self
    remark CCP_ACL Category=128
    permit ip any any
    ip access-list extended web_server
    remark CCP_ACL Category=128
    permit ip 192.168.0.0 0.0.0.255 host 192.168.1.102
    logging 10.0.10.2
    access-list 1 remark INSIDE_IF=Vlan1
    access-list 1 remark CCP_ACL Category=2
    access-list 1 remark VLan 1 Access
    access-list 1 permit 192.168.0.0 0.0.0.255
    access-list 1 remark VLan 3 Access
    access-list 1 permit 10.0.10.0 0.0.0.255
    access-list 1 remark Vlan 2 Access
    access-list 1 permit 192.168.1.0 0.0.0.255
    access-list 100 remark CCP_ACL Category=128
    access-list 100 permit ip host 255.255.255.255 any
    access-list 100 permit ip 127.0.0.0 0.255.255.255 any
    access-list 102 remark CCP_ACL Category=0
    access-list 102 permit ip any host 192.168.0.101
    dialer-list 1 protocol ip permit
    no cdp run
    control-plane
    banner login ^CWARNING!!!This is a highly monitored private system. Access is prohibited!!^C
    line con 0
    no modem enable
    line aux 0
    line vty 0 4
    access-class VTY_incoming in
    password 7 12292504011C5C162E
    login local
    transport input ssh
    scheduler max-task-time 5000
    ntp authentication-key 1 md5 10603D29214711255F106B2677 7
    ntp authenticate
    ntp trusted-key 1
    ntp master 2
    end

    Hello karolos,
    Here is the thing.
    You said you are trying to access 94.70.142.113 and that is a server on the DMZ but based in your configuration that is not true
    ip nat inside source static 192.168.0.101 94.70.142.113
    So 192.168.0.101 is on Vlan 1 witch is the in-zone
    interface Vlan1
    description $FW_INSIDE$
    ip address 192.168.0.1 255.255.255.0
    security in-zone
    If you got confused with  the security zone that the host is assigned to then just add the following and it should work
    ip access-list extended WebServer
    permit ip any host 192.168.0.101
    Regards

  • My IPhone 5 is blocked after asking for update IOS 7.0.2 any idea To unblock it please

    My iPhone 5 is blocked after asking for update IOS 7.0.2 it shows on the screen iTunes with an arrow. Any idea To unblock it please?

    I have a similair problem.  My Iphone 5 has been doing a recovery for approximately 6 to 7 hours.  Should I expect it to take this long or should I restart the process?  Itunes does say it is doing a recovery and looks active but I question the length of time that this is taking.
    Thank You in Advance...

  • My iPad 2 keeps going into no service mode since upgrading to iOS 8.0 and the same with iOS 8.0.2

    My iPad 2 keeps going into no service mode since upgrading to iOS 8.0 and the same with iOS 8.0.2

    Hi jhatlanta, 
    I understand you are using a cellular iPad 2 and since upgrading to iOS 8 (and 8.0.2) your iPad drops the cellular connection and says, "No Service".
    So you have done step 5 in this list, but please test the other steps.
    If you see No Service in the status bar of your iPhone or iPad
    If you're in your carrier's coverage area
    Follow these steps, testing after each.
    Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Restart your device.
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Check for a carrier-settings update: Connect to a Wi-Fi network, tap Settings > General > About, and install any available carrier-settings updates. If you can't connect to Wi-Fi, connect your device to a computer that has iTunes.
    Update your iPhone to the latest version of iOS.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Contact your carrier to check for any network or account issues.
    Restore your iPhone.
    Best Regards,
    Nubz

  • I lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now..

    i lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now.. im wonderin if ist safe coz all my emails are there and all personal info..i hope someone could answer me..i reported to the police the ist step..coz when it happened ..policemen are there..then i went to the nearest MAC center and tried to track it..but its offline..so they asked me if i want to remote lock it..then i did...which i think the mcreason why i cant track my phone beacause its locked?? or not until they connect to wifi or 3g but its unabling them because i locked it..?

    but when i do remote wipe ..it will erase everything in there and i cant track down the phone anyomore?

  • Any one pls send me documentation on blocked and hierachi alv with example

    hi experts,
    any one pls send me documentation on blocked and hierachi alv with example
    rewad points.........

    Hi,
    Check this prg:
    BCALV_TEST_HIERSEQ_LIST
    Regards,
    Subramanian

  • TS3694 I tried to update my iphone 3gs from ios 5 to 6 but because of software crash and while restoring with ios 6 it is not activated. Now I degrade it in ios 4 and can not use any app. How can I update this iphone?

    I tried to update my iphone 3gs from ios 5 to 6 but because of software crash and while restoring with ios 6 it is not activated. Now I degrade it in ios 4 and can not use any app. How can I update this iphone?

    Downgrading the iOS is not supported, and likely has caused the problems you are experiencing.
    You'll need to go elsewhere for support.

  • Help! My iPhone 4 was stolen, and it is in iOS 7, will the phone still be used? Or if they reformat it, my files would be deleted? I hope all my files will be deleted. Thanks for your help. :)

    Help! My iPhone 4 was stolen, and it is in iOS 7, will the phone still be used? Or if they reformat it, my files would be deleted? I hope all my files will be deleted. Thanks for your help.

    Hey ChrisJ4203, thanks for answering buddy , I still have a question.
    I have a passcode for my iPhone, but I don't have the application Find my iPhone. Can I retrieve my photos, notes, reminders and all other data in my iPhone, I mean, if I bought another one, and connect it to my computer and go to iTunes then restore backup, cause I backup my iPhone last Oct 10, 2013, will I recover all the details in my iPhone that was stolen? It's like I'm still using my old iPhone's apps but with a new iPhone. Thanks.
    -Alfonso Santos

  • I bought iphone 4s from us and upgrade it to IOS 5.01 and i cannot activate with etisalat sim as it requires the original carrier sim

    i bought iphone 4s from us and upgrade it to IOS 5.01 and i cannot activate with etisalat sim as it requires the original carrier sim

    The unlocked iPhone 4S did not go on sale in the US until 11/11, and then only through Apple.com in the US.
    I don't know if it's available at retail yet, but I don't believe it is.
    As you've been told, you purchase a phone locked to AT&T. You can NOT activate it or use it on any other network. AT&T does not unlock iPhones for any reason. Return it to the store you bought it from and get your money back.

  • TS1367 My Blueyonder email is coming in but won't send, where am I going wrong with the settings?

    My Blueyonder email is coming in but won't send, where am I going wrong with the settings?

    We don't know. You didn't tell us what those settings are. However, if you contact your email provider, Blueyonder, they should be able to help you. Check their website where they may even have information on how to configure Mail for their site.

  • Please i purchased my iphone from a friend and i updated the ios and now its showing invalid sim

    please i purchased my iphone from a friend and i updated the ios and now its showing invalid sim. please i need help because i have to use my phone at the office tomorrow.

    ASk your friend who unlock the phone for him/her.
    ONly the carrier that the phone is locked to is authorized to unlock it.
    bAse on your description, it sounds like your friend had his/her phone hacked to unlock it from the original carrier.

  • HT5661 i switched my iPhone for an android and now people with iPhones can't message me! How do i stop iMessage?

    i switched my iPhone for an android and now people with iPhones can't message me! How do i stop iMessage so i can get text from iphone users??

    This link will tell you how to fix....
    http://www.techrepublic.com/article/how-to-keep-receiving-sms-from-iphone-users- after-making-the-switch-to-android/

  • HT3302 my iphone is shutting down and not working with my pc.. but when i plug it to the wall it turns on. and off when i unplugged it.. i tried  to reboot but nothing happens.. pls help..

    my iphone is shutting down and not working with my pc.. but when i plug it to the wall it turns on. and off when i unplugged it.. i tried  to reboot but nothing happens.. pls help..

    The problem is your friend's music does not belong to you.  It is owned by your friend.
    I'm afraid you cannot do what you are trying to do.  Restoring the iPhone is what you would have to do.
    In the future, put your music on the computer and transfer it to the iPhone, not the other way.

Maybe you are looking for