My Ipod touch recently fell into water, but once dried, it worked with seemingly little to no problems. Today, after working for at least an hour, the screen froze and is now not working, but the sounds are still functioning.

I accidentally dropped my Ipod into the lake, at the beach yesterday, but i caught it early and it wasn't too soaked... i wiped it off for the most part, and most of the buttons and the screen worked fine! i was shocked, and there were a few glitches with the camera and the slide button on the lock screen, but otherwise it was greatly intact! so i gave it a rest, put it in my purse, and picked it up fifteen minutes later, and it was working 100% normally again! when i got home a few hours later, i put it in rice for a few hours, taking it out every once and a while to check my notifications... it still seemed to be working perfectly, so i just set it down out of the rice, assuming the moisture was gone. this morning, again, everything was working normally, no glitches, UNTIL, i opened my instagram app, and the screen froze, and it seemed like it had two separate screens, and i held the Sleep button down until the screen went black... then i tried turning it back on, etc. and it still didn't work, and so i plugged it into the computer, holding down the sleep and home buttons, and itunes identified it as in recovery mode, and started updating. i tried again to press the sleep and home butttons, maybe pressing only the home button, because I heard the Siri noise, as well as the charging sound, but the screen was still black.... i checked my iTunes, and lo and behold, it had identified my iPod, and synced it to the computer, as if it were normally functioning. However, the screen is still not working, and Siri is not working either. The sounds may be the only thing that's functioning. Should i send it in?

- Restore from backup. See:                                 
iOS: How to back up                             
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
  Apple Retail Store - Genius Bar              
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G, $99 for the other 4Gs, $99 for the 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
  Apple - iPod Repair price
Sometime it takes a little while for the water to damage the iPod.

Similar Messages

  • So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

    So i have an apple ipod touch 1st generation and it is not charging! It shows the charging sign but its taking a really long time to charge. Ive had it charging for at least 3 hours and it still says under 20% so can someone help me figure this out??

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • I have an Ipod touch 2nd generation 8gb. Metal peice fell out from the inside where the home button is and I lost it. Put the screen plug in and put the screen on and it would turn on but it won't unlock or respond to anything I try to do. PLEASE HELP ME!

    I have an Ipod touch 2nd generation 8gb. Metal peice fell out from the inside where the home button is and I lost it. Put the screen plug in and put the screen on and it would turn on but it won't unlock or respond to anything I try to do. PLEASE HELP ME!!!!!!!!!!!!!!!!!!!

    Look her and it may give insite on what is missing. Otherwise:
    Apple will exchange your iPod for a refurbished one for $99. Likely not worth it for a your iPod. They do not fix yours.
    Apple - iPod Repair price              
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Repair it yourself if you are up to it
    iPod Touch Repair – iFixit

  • HT1925 I was trying to make sure that all my Apple software was uninstalled, and I still can't remove C:\Program Files\iPod\.  I went to the Task Manager and it is not listed in the Processes tab.  What do I do now?

    I was trying to make sure that all my Apple software was uninstalled, and I still can't remove C:\Program Files\iPod\.  I went to the Task Manager and it is not listed in the Processes tab.  What do I do now?

    Are you looking for iPodService.exe?
    Might be better to run services.msc from the run dialog and shut down the service polietly.
    tt2

  • Trying to update the software into my Ipdad 2 the screen froze and asked me to restore it but unable to restore due to a -1 error need help

    trying to update the software into my Ipdad 2 the screen froze and asked me to restore it but unable to restore due to a (-1) error
    I need help

    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop.

    Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop

    screen look on

  • I have a 5th generation IPod touch, and today when i turned it on everything was fine. Then suddenly the screen froze and changed colors and lines started coming from the sides of the Ipod until the reached the middle. Now it won't turn back on.

    I tried restarting it by using just the power on button at first. Once that failed I held the power and home buttom for ten sconds and that didn't work. I then plugged in the ipod to see if it needed charged, and repeated the same two steps at before but to no avail. Finally, I opened up itunes and plugged my ipod in, but nothing came up. I then tried to turn it on for a third time, but nothing happened. I just confused on what happened. Could it be a bad display, or did the whole thing just die on me? Help please.  

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have checked the box "display date and time on the Menu Bar" and it does not work.  Using OS X Yosemite 10.10.2  Anybody have a fix?

    I have checked the box "display date and time on the Menu Bar" and it does not work.  Using OS X Yosemite 10.10.2  Anybody have a fix?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • HI my name is Ehab Hejazeen. Im from Mapusa  goa india.i have lost my iphone some time back. i recieved it as a gift from my uncle from dubai so i dont hav the imei number and he does not work there anymore. Please track my iphone . My icloud id is jacobm

    HI my name is Ehab Hejazeen. Im from Mapusa  goa india.i have lost my iphone some time back. i recieved it as a gift from my uncle from dubai so i dont hav the imei number and he does not work there anymore. Please track my iphone . I will be waiting for your response. please help me..
    yours sincerely,
    Ehab hejazeen
    <Email Edited By Host>

    As already stated, no one but the police can help you. I suggest you follow Apple's recommendations as quickly as possible: http://support.apple.com/kb/HT5668

  • My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

    My iphone has turned off and is now not working. I plugged it into my computer and it said it was in recovery mode and i had to restore it to fix it. Is there any way i can fix this problem without loosing all my files and photos through restoring it?

    There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.

  • I have updated my facebook application to the latest one and it is not working..what should i do?

    I have updated my facebook application to the latest one and it is not working...i deleted it and reinstalled it and still not working..what shoul i do?Thank you.

    cristinar wrote:
    I have updated my facebook application to the latest one and it is not working...i deleted it and reinstalled it and still not working..what shoul i do?Thank you.
    As suggested try a reset: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
    Also, it might help if you provide a little more detail on what you mean by "not working"

  • I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

    I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

    Hey tulgan,
    This link will provide information on what to do after you change your Apple ID:
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

  • Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5  and it will not open on the iMac the only change is the my new iPhone number is  OS.  Any ideas?

    Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5  and it will not open on the iMac the only change is the new Maverick OS from the macpro Lion OS.  Any ideas?
    <Personal Information Edited by Host>

    Setup Assistant and Migration Assistant do not restore MS Windows, it only does the OS X partition. All of your Windows stuff must be backed up and restore using a MS Windows application. If no one on this forum is able to answer your question then I'd repost it on a Parallels forum to see how other Windows users approach this.

  • The Em Key is not configured properly or is corrupted in the file system and doe s not exist in the Management Repository.

    I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
    Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
    C:\Documents and Settings\abigail>emctl status emkey
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.
    Please enter repository password:
    The Em Key is not configured properly or is corrupted in the file system and doe
    s not exist in the Management Repository. To correct the problem:
    1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
    onfig directory.
    2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
    .ora file location>".
    C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
    roduct\11.2.0\dbhome_1\sysman\config
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.
    Please enter repository password:
    The Em Key is already configured. To override the current configuration, run "em
    ctl config  emkey <options> -force".
    C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
    roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.
    The Em Key could not be configured. Unable to access file E:\app\abigail\product
    \11.2.0\dbhome_1\sysman\config.
    C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.
    http://ABIGAIL:5501/em/console/aboutApplication
    DBCONSOLE already stopped...   Done.
    Agent is already stopped...   Done.
    Securing dbconsole...   Started.
    Please enter repository schema password:
    Securing dbconsole...   Failed.
    EMKey is misconfigured.

    Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
    AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
    http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
    Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
    ANyway, thank youuuu

  • I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

    I have the iPhone 5s. I synced it with my Mac and got all the old apps from my old phone. I was not able to update any of the apps on the old phone and they will not update on the new iPhone 5s either! What can I do?

    Hey there rmflint,
    It sounds like you are wanting to update the Apps that were synced over from your computer to your new iPhone 5s. If you are clicking Updates in the App Store in the bottom right corner, would you mind clarifying what happens when you are trying to update them? 
    App Store at a glance
    http://help.apple.com/iphone/7/#/iph3dfd8c19
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

Maybe you are looking for

  • ME21N - error during service PO creation - "Please enter a service"

    Hi, PR was created with reference to agreement.  When we try to create PO, below error appears.  Apparently service code, text are available so this error does not make sense.  Have you come across such a situation ? Thanks, Sankar

  • Wrt54g dropping out once or twice a day.. HELP PLEASE :( !!

    I have a WRT54G that drops the internet connection once or twice a day, it only has three/four computers that connect to it, its secured, DCHP i think, and it is connected to the internet through a cable modem. There is a x-box hooked up directly to

  • Contact Book of bigger size than 1000 Contacts for...

    Nokia X2-02 is my phone. It has only 1000 phone book contacts to support. I want more than 3500 contact Address Book for Nokia X2-02. Youlu does not support this phone. Any other software available or any other way to solve this problem. I have java

  • 'organizer' problems

    After clicking the organizer icon, the program automatically shuts down with a message: pse7 (organizer) has encountered a problem and needs to close. please tell microsoft about this problem"  This happened from one day to the next. I did not add an

  • Java type casting interesting query

    In java semantics 1) float var1=10.5; // is wrong it should be written as float var1=(float)10.5; //type casting->double to float or float var1=10.5f; //type casting but 2) byte var2=10; // here int to byte type casting should be there according to p