My Mac's operating system no longer compatible with my Deskjet 3050A

Hi,
I haven't used my printer in a while because it hasn't been working. But I'm tired of running to my neighborhood FedEx Office so am tackling this issue today.
I went to install the HP software on my MacBook Air and was told "installer not compatible with the version of the operating system on your computer. It is compatible only with 10.6 and below."
My Mac is running OSX, version 10.9.5. Is there anyway to make the printer compatible?
Thanks for your help!

Hi @kbaostrem 
A full feature driver for Mavericks is not available for your printer, either from the CD that shipped with your printer or from the HP website. This document applies to HP printers supported in Mac OS X versions 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion), 10.9 (Mavericks), and 10.10 (Yosemite) that only have drivers available through Apple Software Update.
If you would like, I can help you put the printer on your wireless network without software. I use this method for iPads, iPhones and other devices that do not have software.
Restore the network defaults on the printer by pushing the wireless button, going to settings, and then restore defaults. The wireless button should then start flashing, this means it is now in autowireless mode.
Connect to the network that the printer is broadcasting. It is usually HP-setup-3050a and then part of the MAC address. The wireless light will still be flashing on the printer at this point, this is normal since this is not an actual adhoc connection.
Load up the Embedded Web Server (EWS) in the browser on your mobile device. The default IP for autowireless is 192.168.223.1.
Go to the network tab along the top of the EWS.
Click on Wireless Setup Wizard along the lefthand side to begin configuring the printer.
You have now completed the Wireless configuration, follow the next 3 steps to start printing.
The blue wireless light will go solid, put the Mac back on your own network.
Add the printer to the System Preferences.
Print
Please let me know if this resolves the issue. I look forward to hear from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

  • What operating system smartphone is compatible with Adobe Flash Player?

    What operating system smartphone is compatible with Adobe Flash Player?

    Hello,
    Flash Player is no longer supported on mobile devices.  With that said, you can manually install the last supported version of Flash Player for Android devices using the instructions here "Why can't I install Flash Player on my Tablet?" (Kindle or Samsung Galaxy). Do note that this is very old and has not been updated with any security fixes.  This FAQ offers some alternatives to Flash Player on Android devices.
    Maria

  • My Laptop operating system isn't compatible with the sortware...HELP

    I'm using my old PC Laptop which uses Windows Vista operating system....how can i download the free trial pacakages??

    you should be able to download without problem.  installing you can only do with programs compatibile with your os.
    either use old software or upgrade your os.

  • My Mac has Operative System MAC OS X Version 10.6.8,processor 2x2.66Ghz Dual core Intel Xeon. Is this compatible with Photoshop 5.5 or 5 and how can  I get it in Bogotá, Colombia or can I download it ?

    My Mac has Operative System MAC OS X Version 10.6.8,processor 2x2.66Ghz Dual core Intel Xeon. Is this compatible with Photoshop 5.5 or 5 and how can  I get it in Bogotá, Colombia or can I download it ?

    CS5 and CS5.5 are no longer sold. You can either buy CS6 or the subscription to CC. System requirements | Photoshop
    Benjamin

  • My ipad has latest iTunes (11.1) but iTunes on my computer (mac 10.5.8) is now no longer compatible with ipad software and cannot sync.

    My ipad has latest iTunes (11.1) but iTunes on my computer (mac 10.5.8) is now no longer compatible with ipad software and cannot sync. The same error message appears saying my computer needs to update software, but my mac has the latest software available (albeit rather old). Can I undo the software update on ipad??? Thanks

    Thanks for your response, Niel. Is there no way of removing the last update from my ipad????
    Appreciate your help
    James

  • Can I use a mac pro operating system disk to upgrade a macbook

    I need to upgrade my 10.5.8 system to 10.6 before I can upgrade to Lion. I have a mac pro operating system disk for 10.6 can I use this?

    No. The gray-colored restore DVDs provided with a Mac are not the retail OS version. They contain only the drivers applicable for the purchased hardware, and the installer has a function to verify the hardware is of the type the disk was created for. If you attempt to use the Mac Pro restore disk on a different model Mac, it will simply refuse to install.

  • Help! My display driver is no longer compatible with Adobe software!

    Help!  I rely on Adobe CC and my iMac to earn my living. My display driver is no longer compatible with Adobe software! What should I do? (most affordably because I dont have enough money for even basic living expenses right now.) Detailed notes are below but in a nutshell, I have a NVIDIA GeForce 8800 GS display driver. Adobe no longer supports it and disables the software functions depending on the graphics hardware. It recommends I check the manufacturer's website for the latest software. I did but only found firmware update for a different type of display driver for my early 2008 iMac. What should I do??! Please help me solve this!
    Note from Adobe:
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
    Adobe: “Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.”
    I have an early 2008 iMac:
    Hardware Overview:
    Model Name: iMac
      Model Identifier: iMac8,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 3.06 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache: 6 MB
      Memory: 4 GB
      Bus Speed: 1.07 GHz
      Boot ROM Version: IM81.00C1.B00
      SMC Version (system): 1.30f1
      Serial Number (system): YD*****N4
      Hardware UUID: D42002AC-A757-51C0-8D5D-333AD24D3DF9
    My display driver:
    NVIDIA GeForce 8800 GS:
      Chipset Model: NVIDIA GeForce 8800 GS
      Type: GPU
      Bus: PCIe
      PCIe Lane Width: x16
      VRAM (Total): 512 MB
      Vendor: NVIDIA (0x10de)
      Device ID: 0x0609
      Revision ID: 0x00a2
      ROM Revision: 3234
      Displays:
    iMac:
      Display Type: LCD
      Resolution: 1920 x 1200
      Pixel Depth: 32-Bit Color (ARGB8888)
      Main Display: Yes
      Mirror: Off
      Online: Yes
      Built-In: Yes
    Note from Adobe:
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
    Adobe: “Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.”
    <edited by host>

    If you decide to use up to the minute applications, you will have to accept that the computer and operating system will eventually be incompatible with your chosen application as the features in the latest application rely on new hardware and operating systems to support them.
    Your options are to either use a newer Mac or use a version of Photoshop that will run on your Mac.

  • After replacement of my hard drive iPhoto is no longer compatible with my lion software - why ?

    after replacement of my hard drive iPhoto is no longer compatible with my lion software - why ?
    any suggestions on how to fix this ?

    what version of iPhoto are you using? i can't begin to answer that - it is no longer listed in my applications & has only a shadow of its icon in the dock
    what version did you have before the drive replacement? same answer
    what system version are you running? 10.8.5 - the one i was using when the hard drive died
    what exactly do you see when iPhoto attempts to launch? -it doesn't attempt to launch - i get a message saying "You can’t use this version of the application “iPhoto” with this version of OS X. You have  OS X 10.8.5. The application requires OS X 10.9 or later".
    what have you tried? wringing my hands ! i daren't try anything after the hard drive crash
    where is your library located? there is an iPhoto library folder on my desktop with random photos & albums - not all - put there by me - i vaguely remember a problem with iPhoto when i upgraded from snow leopard
    did you apply any updates or upgrades just prior to the problem occurring? after the drive replacement i uploaded saved data from a week old back up and found iphoto looking somewhat sick - no updates were offered in software updates
    are you running a "managed" or "referenced" library? i'm afraid i do not know what that means
    what type of Mac? a macbook pro
    how much free space on your boot drive? about 380 GB
    thank you very much for your questions - i hope i find some answers 

  • HT5988 I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version?  How do I make that unit compatible?  olefromca

    I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version?  How do I make that unit compatible?  olefromca

    I agree entirely, been messing with this since the upgrade to Mavericks but I didn't find it quite as easy as uninstalling the WD smartware as it still operates when you plug the drive back in - I think it gets loaded onto the drive and runs from within (?). The advice from WD was that time machine was faulty and I should contact Apple...thanks guys!
    Anyway, for the OP's benefit, this is what I found:
    1. My problem was that time machine couldn't see any further back than before the Mavericks install, but if I opened up and interrogated the WD drive, the old backups were still there.
    2. When TM started doing new backups, it overwrote the ones that it could see, not the oldest ones on the drive. This indicated to
    me that the WD software had somehow partitioned off the old backups and excluded that part of the drive from being overwritten. Of course, as the drive was practically full, it meant that any new backups wouldn't fit in the available space.....
    3. The only way I could find to resolve this was to use the disc utility to erase and repartition the external drive. This will obviously remove all of the old files and backups, but I was more concerned about keeping a current profile as backup rather than a load of stuff from months ago.
    4. Anyway, what happens after the eraseure has completed is that you get the WD icon on the desktop, and you're invited to install the software - this means the software has now been deleted. Juts don't reinstall it, just let TM do it's backup and all is well.
    Usual disclaimers and warnings about keeping another copy of your system etc. obviously apply, and I know this is a radical move to delete all your old data but it worked for me. I guess I didn't appreciate that you could use the external drive without the software that came with it and just followed the screen guide.
    I'm also aware that if you don't want to use TM to do a complete restore and only want to find one old version of a document, this is difficult. However, you can then install the WD software and find the file but you'll then have to do this all again.....

  • Airport Express Airplay no longer compatible with iTunes 11.3

    Hi,
    Everything was working perfectly until this morning when I updated to itunes 11.3 (54) 64 -bit, now I open my itunes and try to select my airplay speakers connected to an Airport Express and the message appears "The Airplay device is not longer compatible with this version of iTunes" I have a Mac Book Pro with OS X 10.9.4 installed.
    Any help will be much appreciated.

    My iPhone, iPod, iPad and any other device sends the music perfectly through, just my Mac with iTunes is the one having the issue.

  • Java, Adobe Acrobat, HP Web Printing, Adobe Contribute, all of which people use world round no longer compatible with Firefox? Maybe it's time to go back to IE.

    Firefox used to be the best, now its working against every piece of software i use in the publishing industry. Java is important, so is Adobe Acrobat, and Adobe contribute.
    Maybe it is time to kick Firefox to the curb. Firefox is not getting better, it's getting worse. It freezes, it crashes, it's no longer compatible with major programs in the publishing industry.
    AND, you guys never answer any of your users. I'm tired of Firefox freezing up. read your freaking forums. Your not making the internet better, I used to have such faith you.

    Thanks Mike!
    I'm just so frustrated, its bad enough my other laptop wasn't even 2 yrs old
    yet and I've spent $800 to have it fixed twice already, this 3rd time I was
    DONE... so I moved onto Sony, but this Vista just is making my life a living
    hell, I just spent a fortune on the laptop, and now I have to buy Adobe 9
    when my adobe 7 isn't even 2 yrs old... ugh... its just very frustrating and
    nerve racking and is costing more than I make in a week in this business
    (real estate processing)... I should sell Microsoft for a living, I'd be a
    millionaire!
    My husband's Mac has been through hell and back physically, is 5 yrs old and
    we've never had to take it in for any upgrades or issues, its SO easy to
    use... why can't Microsoft be the same?!?!
    Thanks for your input and for being understanding of my frustration, I bet
    you see those often! LOL

  • I can not eliminate ASK engine from the list. It came back by itself. Please, tel me how I can eliminate this problem. Another problem, this browser is no longer compatible with some institutions. This new version might have some problems.

    '''I can not eliminate ASK engine from the list. It came back by itself. Please, tel me how I can eliminate this problem.
    Another problem, this browser is no longer compatible with some institutions. .'''

    Step by step, how did you arrive at seeing this agreement?

  • Found 0 results for Good Morning, I'm all for updates and maintaining, but I'm upset that Googletooolbar is no longer compatible with Mozilla 5 because I had a great amount of sites saved on Google Bookmark and now it is lost. Any suggestions?

    Good Morning, I'm all for updates and maintaining, but I'm upset that Googletoolbar is no longer compatible with Mozilla 5 because I had a great amount of sites saved on Google Bookmark and now it is lost. Any suggestions?

    Hi userwhat,
    Your personal data should have been saved, and you can try to follow these steps to fix your problem.
    *First, you should report that to the developer of the add-on the troubles that you are experiencing.
    * Then, you can try [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ The Add-on Compatibility Reporter], which allows you to use add-ons that haven't yet been explicitly updated to work with Firefox 5, and lets you report the results of compatibility.
    * For add-ons that do not work with The Add-on Compatibility Reporter, you can still downgrade to the previously maintained version, which is Firefox 3.6 that you can download here: [http://www.mozilla.com/en-US/firefox/all-older.html http://www.mozilla.com/en-US/firefox/all-older.html]

  • Good Morning, I'm all for updates and maintaining, but I'm upset that Googletooolbar is no longer compatible with Mozilla 5 because I had a great amount of sites saved on Google Bookmark and now it is lost. Any suggestions?

    Good Morning, I'm all for updates and maintaining, but I'm upset that Googletoolbar is no longer compatible with Mozilla 5 because I had a great amount of sites saved on Google Bookmark and now it is lost. Any suggestions?

    Hi userwhat,
    Your personal data should have been saved, and you can try to follow these steps to fix your problem.
    *First, you should report that to the developer of the add-on the troubles that you are experiencing.
    * Then, you can try [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ The Add-on Compatibility Reporter], which allows you to use add-ons that haven't yet been explicitly updated to work with Firefox 5, and lets you report the results of compatibility.
    * For add-ons that do not work with The Add-on Compatibility Reporter, you can still downgrade to the previously maintained version, which is Firefox 3.6 that you can download here: [http://www.mozilla.com/en-US/firefox/all-older.html http://www.mozilla.com/en-US/firefox/all-older.html]

  • My iPhone 4S is no longer compatible with my Sony ICF-DS15iP dock since updating to iOS7.1.1

    Since updating to iOS 7.1.1 my iPhone 4S (16GB) is no longer compatible with the Sony audio dock.
    How can I fix this ? it was working before updating my phone.
    Thanks for your reply

    Try restoring the iPhone ,it may be corrupted iOS installation

Maybe you are looking for

  • Why don't my YouTube playlists show up on Apple TV?

    YouTube playlists do not show up on Apple TV. grr. The playlists for my YouTube account (let's call it Account A) suddenly stopped showing up on Apple TV (I get a "No Content Was Found" error, and a suggestion that there's a problem with the connecti

  • Default condition types displayed

    hi, when i create a contract, i double click the item then go to conditions tab.  in there, are already displayed condition types based on the pricing procedure. however, some conditions, i want to be automatically displayed(not manually added). what

  • Resolution of question pools

    I have created a pool of question from which I want to add random questions to a few different presentations but when I import the question pool and then add a random slide to the project the question is cut off by the size of the project. I think I

  • How to move or migrate whole directories between ASM disk groups?

    Hello everyone! I'm playing around with Oracle ASM and Oracle Database (11g R1), I'm a student. This is just for testing purposes. Computer specifications are: Processor: Intel Pentium 4 HT 3.00 Ghz. RAM Memory: 2 GB. Hard Disk: 250 GB O.S.: Windows

  • Interaction Captivate 6

    I am using an interaction in my Captivate 6 module.  The background slides is black.  When the interaction loads, a distracting white background appears.  Can I minimize this distraction in any way?