My MacBook Pro's power cord just died yesterday - no power. I borrowed my husband's to charge my computer and now his is dead too! Is this my computer doing this?
My MacBook Pro's power cord just died yesterday - no power. I borrowed my husband's to charge my computer and now his is dead too! Is this my computer doing this?
there are only 2 statistical probabilities of both charger blocks (NOT the cord as you report) going at the same time.
and what "goes" is one of the 2 capacitors inside them.
A: bad power on your outlet (more likely)
B; also likely is a defective IO board in your macbook causing the charger blocks to go kaput
Contact Apple for appt for free diagnostic examination in shop
Similar Messages
-
My phone is an iPhone 4
computer is a macbook pro OS X 10.8.5
When I plugged in the phone it asked me to unlock the phone with my password which I did.
Then it asked if I trust the device and I accidentally pressed don't trust. On the computer ( iPhoto) it told me there were no photos on the phone)
I tried unmounting the phone and retrying but get 0 photos now when there are many new ones.iOS 7 devices need iTunes 11.1 or newer to sync. Depending upon your computer and the OS it is running, you may not be able to upgrade to iTunes 11.1 based on the requirements for iTunes 11.1. What computer and OS are you running your iTunes on? From the iTunes download pages I see the requiorements are:
Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store -
I am traveling from the US to France and have a Macbook Pro. Can I just use a plug adaptor or do I need a power converter to plug in?
Just an adapter to change the US plug style to the one in the country you are going to. The AC charger will do the rest. It is rated for 120-240 volts and will adjust on its own.
-
My MacBook Pro will not powerup (even when connected to power supply).
My MacBook Pro will not powerup (even when connected to power supply). The caps lock key is the only light on.
Hi PatB11902,
Thank you for visiting Apple Support Communities.
If your MacBook Pro does not seem to power on, but the caps lock key will light up when you press the caps lock key, you are likely seeing a video issue.
There are several steps that can help troubleshoot this behavior, found at this link:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Start with these steps:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Start up in Safe Mode.
If your Mac does not start up normally after these steps, here are some additional tips that can help:
Troubleshooting: My computer won't turn on - Apple Support
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Sincerely,
Jeremy -
I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!
My dealer has tried and failed (twice) to correct this and I have tried deleting the two items in the Itunes folder but no luck!were you able to get help on this? I need help on error 5002 as well. thank you
-
I just got my MacBook Pro a month ago. However I am realizing I need more hard drive space due to aps and programs. I use am external but am concerned about the space. Is there a way to upgrade my hard drive from apple and keep my warranty valid?
That would depend on whether your model actually has a hard drive. If you have the new 2013 Retina model, then you have a fixed storage device built-in that cannot be modified after purchase.
-
bought referbished macbook pro oct 2011 version, just set it up using time machine and quicklime pro has disappeared. I have quicktime but not quicktime pro. Any ideas? thanks!
Try, in preferences, resetting 64 bit to 32 bits. Should work fine. the older vidoes, etc will not work with 64 bit. Had the same problem/scare. Let us know if this helps and works!
-
I have my contacts on iphone5 and MacBook Pro 2012. I just purchased a MacBook Air 2013 and want the same contacts on that device. What is the best way to do this? Non-techie. Thanks
Follow the instructions for enabling your iCloud account on the MBAir here > Apple - iCloud - Learn how to set up iCloud on all your devices.
-
MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is not an external device connected.
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
Im trying to install windows 7 in on my macbook pro, i thought it just install like intel based PC, so i use windows 7 DVD, i format the harddisk, and installation failed. When i reboot, OS X is missing, because i've format my harddisk. So what should i do to make my MBP is with windows 7
Thanks for all of your help! Big time!
Guys, I been in the business working on PC and MAC for years. So I am not green at this, I was looking for some kind of option to get past the boot loader.. Which is failing.
I know how to boot into these modes.. Done tons of research before posting and couldn't find anything.
It will not go into Internet Recovery, or any thing else. I hear the sound .. then that is it.. I get nothing else..
I have tried clearing the NVRAM which is Option + Command + P + R
Still nothing..
So I thought I would try here to see if maybe there was some trick out there someone might know of that would work.
What else guys? I am hitting th keys right.. -
iTunes won't launch on my MacBook Pro. The icon just bounces. I restarted my computer and it still won't open. Any suggestions?
Try redownloading it from:
http://www.apple.com/itunes/download
If you need further assistance on this thread, tell us the OS X version you are running on your MacBook Pro, and the iTunes version number. -
Macbook Pro about 2012 won't start with out power lead in and runs very very slow Maverick OS
Macbook Pro about 2012 won't start with out power lead in and runs very very slow Maverick OS?
Take each of these steps as needed, and check to make sure it hasn't been fixed with a reboot afterwards before trying the next step.
Backup your data if you haven't already:
https://discussions.apple.com/docs/DOC-1992
If you use Airplay, see https://discussions.apple.com/docs/DOC-6831
If you don't use Airplay, be sure to upgrade to 10.9.2, using this update:
http://support.apple.com/kb/DL1726
Make sure your hard drive is not over 85% full.
Make sure Spotlight is not indexing.
Make sure Time Machine is not running when you do other tasks.
Check to make sure you have not accidently/purposefully installed MacKeeper, as it will slow down your Mac:
https://discussions.apple.com/docs/DOC-3036
Remove any other system cache cleaning applications.
Reset the SMC:
http://support.apple.com/kb/ht3964
Reset the PRAM:
http://support.apple.com/kb/ht1379
Check to make sure there aren't any signs the power adapter might be damaged, or the wrong one*:
http://www.macmaps.com/frayguide.html
If there are still issues, you may need to replace the battery:
https://www.apple.com/batteries/replacements.html -
MacBook Pro keeps shutting down unless connected to mains power
My MacBook Pro keeps shutting down unless connected to mains power, even when fully charged. I took it into Apple store, Leicester, UK - battery diagnostic shows good condition so they updated the system but that hasn't worked. I'm running OS X 10.6.8
Thanks! I've followed your suggestion and so far my MacBook has been behaving for the past few hours without being plugged into mains power! Fingers crossed...
Carolyn Samit wrote:
Try Resetting the System Management Controller (SMC) -
I purchased my MacBook Pro in late 2007, just before Leopard was released. I want to upgrade my memory and need to know if DDR2-667 SoDimm PC2-5300 is the correct type.
If you have to wonder which RAM is the correct type, you probably aren't buying from a store that will give you the right RAM. Many stores specify model and vintage of Mac on their website to ensure you get the right RAM. Check my FAQ*:
http://www.macmaps.com/badram.html -
I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.
Thank you - that all makes sense. It is, indeed, exactly what I did when I upgraded.
I'm also writing this on the machine that crashed a few minutes ago (I posted the crash in another thread). I got back with a 'safe boot' - as I have done a few times before.
I've also de-installed little snitch (and then done a safe-boot & then re-boot ) since that seemed involved. I de-installed Adobe flash, since that seemed to be a problem - I then re-installed the later, apparently fixed, flash. The most recent crashes don't seeme to have a problem with flash any more.
I've posted the various ( generally different ) crashes. I also posted a summary of the similar lines that turn up in most of the crashes.
Unfortuantely, I'm actually trying to use the machine to meet some urgent deadlines and all this is not making it at all easy.
I had had great hopes for 10.7.2 - I thought that the crashes must be pretty common, so would have a common aetiology. There do seem to have been some fundamental changes to the file sytem and to the video interface (that seems to cause problems to brand new iMacs as well as to my 2009 iMac).
Maybe you are looking for
-
Hi, i'd like to change the orientation of the print output of an ABAP report (Report print output on the screen using write). Currently the output is landscape, but i need it in portrait. Is there any way in doing this? I tried changing the format ty
-
Clusterware patch for 10.2.0.4
Will there be any separate patch to upgrade oracle clusterware from 10.2.0.1 to 10.2.0.4.... why because we installed oracle clusterware 10.2.0.1 and Oracle RAC database 10.2.0.1 and upgraded with patch 10.2.0.4.....which upgraded both clusterware an
-
This queery is pertinent to CS4 in particular. In previous versions of premiere pro2 and cs3 if I wanted to export a series of small eg. 10 second clips from the timeline to use in another app I would use the export movie option or adobe media encode
-
Dual boot setup with two hard drives
Hi all, I've searched through the forums but haven't been able to find an answer to what I figure is a couple pretty easy questions. My wife has an older G4(circa 2000) with OS 9.2.x on it now. What I would like to do is put a new, larger HD in the b
-
What is the best approach for executing this code only once?
Hi, What would be the best way to this using JSF/Java web architecture? I have a login page, login.jsf, that submits login credentials to another servlet and if successful, is redirected to a login success page, which I have called "main.jsf", my app