My macbook pro simply won't turn on. The light is dim when charging! What's wrong with it please?

Hello there
My macbook turned off the other day and i havent been able to turn it on since
When charging it, a faint green light comes on but nothing else
any help would be much appricated!
thanks

The folks at the Genius Bar are very good at Power and other Physical problems like this. Your appointment for an evaluation is FREE, in warranty or out.
Be sure to bring all the equipment you normally use together -- MacBook, Power Adapter, and external drives and mice, if any.

Similar Messages

  • My MacBook Pro 13" won't turn on 90% of the time I try to get it running, and when it does turn on, even on a charger, it shuts down if I stop using it for 2  seconds and it won't turn back on. Should I replace the battery?

    My MacBook Pro 13" won't turn on 90% of the time I try to get it running, and when it does turn on, even on a charger, it shuts down if I stop using it for 2+ seconds and it won't turn back on. Should I replace the battery?  It doesn't hold a charge either...

    EmadJamal,
    the battery won’t melt because of long connection to the AC charger, although that has the potential of reducing the battery’s life.
    Do you have access to a second 60 W AC charger to test with your MacBook Pro, or access to a second 13-inch MacBook Pro against which your AC charger could be tested?

  • How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way?

    How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way? Thanks.

    You put the internal drive in an enclosure. If you choose to keep the drive, you don't need to erase it.
    (110687)

  • My MacBook Pro 2009 won't turn on. It suddenly won't charge and when it did I shut it down and now it won't turn back on. Charging shows green and the green little dots are showing on the side. I tried smc reset, command p r, what else?

    My MacBook Pro 2009 won't turn on. It suddenly won't charge and when it did, I shut it down and now it won't turn back on. Charging shows green and the green little dots are showing on the side. I tried smc reset, command+p+r. Any other suggestions before i take it to apple service center?

    A four year battery could be dead. I'd contact an Apple Service Center.

  • HT1338 my macbook pro airport won't turn on! What would be the problem?

    my macbook pro airport won't turn on! What would be the problem?
    I've tried to turn the airport on and it says my airport card is not installed...
    it has always worked till today... bot from now on nothing seem to help the airport work...
    Please help me!
    Thanks

    You could try deleting the airpot from the sidebar of system preferences/network. To do this,
    1)  export the preferences for your airport to your desktop by pressing the gear next to the plus and minus sign above the lock. 
    2) Delete your airport from the sidebar using the minus sign while the airport is selected.
    3)  After deleting the airport, apply the changes and then press the plus sign to create a new airport. 
    4)  Then import the preferences back in and apply the changes again.
    This may bring your airport back.  It worked for me.  Alternatively, people have been having success with changing the location of the airport. 
    Good Luck.

  • I am confused about something.  How do I read a book on my MacBook Pro?  I can't find the iBook app anywhere, which is what I use on my iPad.  The book I want to read is in my iTunes but I can't click on it.  My iBook library does not show up in iTunes.

    I am confused about something.  How do I read a book on my MacBook Pro?  I can't find the iBook app anywhere, which is what I use on my iPad.  The book I want to read is in my iTunes but I can't click on it.  Some of my iBooks show up in my iTunes but they are "grayed" out.  The only books that respond in iTunes are audiobooks and that's not what I'm looking for.  Is this a stupid question?

    Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro.  If I want to read on my mac I have to use Kindle or Nook.  Which means any book I've already purchased through iBooks has to be read on my iPad.  Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

  • The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

    The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers
        Make sure that Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
    6. System Preferences > Sound> Sound Effects
        Play sound effects through:
       Select "Internal speakers" and then back to "Selected sound output device".

  • HT1688 My iphone 5 won't charge and it's in perfect condition, I dont drop it and it's not cracked. I tried multiple chargers, none of them are damaged and my outlets work with other things so the problem is my phone. What's wrong with it and what should

    My iphone 5 won't charge and it's in perfect condition, I dont drop it and it's not cracked. I tried multiple chargers, none of them are damaged and my outlets work with other things so the problem is my phone. What's wrong with it and what should I do? Please help me I need my phone for work.

    Make sure there's nothing blocking a contact in the charging port of the phone.

  • Have a 2 year old macbook pro that won't turn on--logic board?

    We have a 2 year old Macbook Pro that will not turn on. A computer repairman said it's probably the logic board. Does Apple warrant that or are we just out $1,700?

    When you attach the power adapter, does the led light up?  If so, what color?
    What happens if you press the external battery check button?
    Have you tried a SMC reset?
    http://support.apple.com/kb/ht3964
    Have you had it evaluated at an Apple store genius bar or an AASP?
    Ciao.

  • Macbook Pro 2011 won't turn on (RAM issue?)

    (Macbook pro 2011) I had water damage so I sent in to apple for a complete makeover and they pretty much replaced everything. The laptop seemed to be working fine but the issue is that when I put my laptop to sleep / turn off it won't turn back on. I haven't had the time to take my laptop back to the apple store due to projects / travelling. I've found that there is one quick fix, manually resetting the ram by taking the RAM chips out for a second then re-inserting them. The other way is to hold Command+Option+P+R 3 times before reboot and that'll work temporarily for a day maybe. I plan on taking it to the apple store in a day or so if the problem doesn't resolve itself. Do you guys have any suggestions?
    Thanks,

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Also see:
    Reinstall OS X Without Erasing the Drive
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Macbook Pro 15" won't turn on with battery or with power cord

    I have a refurbished Macbook Pro, which I believe is a 2009 model. The battery recently was completely drained, and I plugged it in to charge, but all I got was the green light on the power cord. The battery refuses to charge, and I'm not sure if it's possible to run without the battery in, but I tried it and the computer won't start up at all. I tried an SMC reset, but don't think anything happened. Is this a fixable problem, or do I need to take it in?
    OS 10.7.5 just FYI, I would provide other specs but I don't know off the top of my head and as per my situation, I cannnot check them.

    Hi e_wiegner,
    It sounds like you've already tried a couple good things for troubleshooting your computer not turning on.  I'd go through this article and see if you've exhausted your troubleshooting steps:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Take care,
    - Ari

  • My MacBook Pro Retina won't turn on! Yesterday I installed the new updates.

    So it's fully charged. I used it without any problems last night, then shut it down. This morning when I tried to turn it on, it won't. I have Lion installed and am up to date with all of the software updates. There is a green light in the AC adapter. What should I do??

    I know this post is from back in September of last year, but I wanted to comment for posterity to say what worked for me with my July 2012 retina MBP refusing to turn on. From the link preludio posted above: http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US
    Use the "Resetting the SMC on portables with a battery you should not remove on your own" method (ie., for all Macbook Pros early-2009 and later). Worked perfectly for me:
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Anonymous34 wrote:
    So it's fully charged. I used it without any problems last night, then shut it down. This morning when I tried to turn it on, it won't. I have Lion installed and am up to date with all of the software updates. There is a green light in the AC adapter. What should I do??

  • MacBook Pro 15" won't turn on after a shut down.

    My MacBook Pro 15" late 2008 mavericks won't turn on after a shut down. Tried SMC reset, plugged and unplugged charger multiple times as well as installing the battery. It has started that after a while I have replaced my old battery with a new one,upgraded to Mavericks and increased my memory to 4GB. In the beginning after I would install every time the battery ,it' would turn on after 8-10 tries. Today it's completely unresponsive . Tested different outlets, with and without battery,nothing worked. I also heard that some other people have this issue once they have updated their operating system from  10.5.8 to Mavericks. Is that the problem.? Has anyone found a solution to this?

    Hi there Olgabinou,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/ts1367
    -Griff W. 

  • My new Macbook Pro suddenly won't turn on!

    I just got my new Macbook Pro 15" 2.66GHz and now it won't turn on. I was using it until it almost didn't have any battery left. Then I was away from it for a while and when I came back I couldn't make it work again. When the power cable is plugged in the little white light on the cover blinks and I can here a strange sound turning on and off again and again - sounding like the harddisk turning on and failing, turning on and failing... Now the power cable has been in the computer for a while but it's still like this and the lamp on the adapter is green - not orange, which it should be when it's charging. This is really bad since I have a lot of work on it, do you know anything? Please and thank you.

    If the little light on the front of the MBP is still on, hold down the power button until it turns off and all signs of activity stop. Then reset the SMC:
    http://support.apple.com/kb/HT3964
    Reconnect the AC adapter. Does it begin charging now (orange light on the plug)? If so, let it charge for half an hour and then try starting it up again. If that works, it's ready to use normally.
    Message was edited by: eww

  • My MacBook pro 2009, won't turn on but the indicator light does.

    Hey guys, I am computer illiterate as far as hardware goes, so I hope someone can help me.  I have a 2009 MacBook pro, and today was the first day I have ever had a problem with it.  It won't turn on, however the little power indicator light does come on and it stays on.  The battery indicator is green.  The keyboard isn't working because when I press on the caps lock button it doesnt turn green.  I tried to charge my IPhone to it to see if it was getting enough power, and the IPhone didn't charge.  So I'm guessing that my MacBook isn't getting enough power, could it be this simple or more severe.

    It sounds like your MBP doesn't produce a startup chime that is an indication that the POST, Power On Self Test, has failed which means that it has hardware problems that are serious enough to prevent POST from completing successfully.
    You are either going to have to do some serious troubleshooting to find out what part of the MBP has failed or take it to Apple and ask them to fix it for you. They will give you an estimate after they see it so that you can decide if you are going to have it fixed or not.
    Allan

Maybe you are looking for

  • Diadem not Responding- DIAdem.TOCommand

    Hi ALL, I have an issue here. I have developed a VB .net Code that Will call Diadem  10.2 and pass information to Diadem and call a SCRIPT. This application was workign fine in Windows 7 machines and other XP machines i have installed. But when i tri

  • Sap Script - Printing text

    Hi Experts, In a classical ABAP report we make use of write:/20 'Text'. to print text from the 20th column. Can we do something similar in a SAP Script Page Window. I have a box and lines drawn. Now I want the text to start exactly after the vertical

  • Header text flow from ME51n to ME21N

    Hi Experts,                    I will enter header text in ME51N (PR creation) and save that .In ME21N  that header text should flow while I refer the PR number .Please tell me what badi should be used and how to use d same. I am new to BADI.Help me

  • Adding additional costs to Material with price control "V"

    Good Morning Gurus We want to add some additional cost to materials. How to do this ? These materials are valuated at MAP. Actually there are some delivery costs which were not inventorised correctly to the materials. The materials are undervaluated,

  • Laserjet 2605dn - Won't print the color RED

    My 2 year old 2605dn is acting up.  When I try to print a test page made up of several colors the color red comes out orange on the left side and fads to yellow on the far right side.  I have changed the toner cartridge (all cartridges are HP, no kno