My Pavilion dv1000 with XP SP3 temperature is terrifying

Hello,
My Pavilion dv1000 with XP SP3 temperature is terrifying.
The temperature of the CPU is 42 celsuis and the HDD is 57 celsuis.
Does those numbers sounds normal ? If not, then how can I maintain good range of temprature and what am I doing wrong ?
Thank you

Hi,
You've got another post, that one and other could be related. Please use the following method(s) to keep your machine cooler:
http://news.yahoo.com/blogs/technology-blog/keep-laptop-cool-172740363.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Drivers for Pavilion dv1000 from HP website don't work! :(

Hello everyone.
I have an older HP Pavilion dv1000 laptop here that I am trying to reinstall XP Pro on.
It is XP Pro SP3 32-bit version.
I have performed a clean install - deleted all partition, reformatted, and installed XP.
That worked OK, but now I need to instal the drivers for things such as the sound and VGA etc.
I found the drivers on the HP website here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=43561...
I downloaded them all, but the probem is that NONE of them work.
I started with the audio driver - bargraph goes across, then reports that the install failed.
I then tried the VGA - Install package starts, then reports there is no supported hardware.
Can someone here give me a link to the CORRECT drivers please, as the HP website is obviously linking this model to the wrong driver files.
Thanks a bunch for anyone who takes the time to reply.
This question was solved.
View Solution.

YAY! - Everything is working!
Thanks.

HP Pavilion dv1000

Hi All,
        I purchased a HP Pavilion dv 1000 in 2005 I only used it for just over 3 weeks, Then I got transfered to Houston Tx
Where I remained for over 6 years, but before I left the UK I was having problems with my HP dv1000 before I could send it back to HP I was transfered, Now over 6 years later I'm back and was wondering would it be worth the trouble of paying for it to be fixed...I did take it to a computer repair guy and he said it needed a new HD I bought a new HD and installed it but zilch
...nothing happened at all, wouldn't even start up, nothing.....I've been told that it now needs a new MB but after paying £70 for a new HD I'm very dubious of laying out anymore money...If I sent it back to HP would they repair it for me? I'm willing to pay
as long as it will work....I think I remember reading something about the HP pavilion dv1000 having trouble after I bought it .
Does  anyone know what the problem was? Please contact me on {Personal Information Removed}
                                           Thanks in advance....Jim Hover

Hi, Jim:
If it were me, I would not throw good money after bad.
HP may repair it for you, but it would be cheaper to buy a brand new notebook, I'm sure.
If you don't want to bear the expense for a new notebook, I recommend getting some gently used notebooks on places like eBay or go to your local computer shop and see if they have some nice second hand notebooks for sale.
Notebooks from 2005 are becoming a little dated.
Paul

My hp pavilion dv1000 (1615ts) has an overheating problem and shuts down suddenly. please help..

my hp pavilion dv1000 (1615ts) has an overheating problem and shuts down suddenly. please help..

with that age of laptop we immediately suspect an issue with dust clogging the exhaust fan or the thermal compound between the heatsink and fan breaking down and needing to be replaced. The laptop needs to be opened and inspected in other words.

Notebook- Pavilion dv1000: Increased RAM, USB Mouse Turns Sluggish

My HP Pavilion dv1000 had an original 512MB DDR single card RAM. Due to slow performance, I recently added a second DDR RAM card of 1GB, increasing the total RAM size to 1.49 GB. The system performance has improved significantly.
However, I had been using a USB connected external Optical Mouse with the computer. That same mouse has suddenly turned very erratic after this installation. It works fine for a few seconds, then the cursor suddenly Hangs/Freezes for a few seconds (sometimes even for longer spells), and then jumps and becomes responsive again for a few seconds.
No other device has so far shown any misbehaviour. Will be thankful for any guidance to help me tune up the settings to make the USB Mouse work smoothly again.
Thanks.

could be a coincidence....try a different mouse

I am trying to install a hp officejet 4215 all in one on a HP Pavilion slimline with Vista

I am trying to install a hp officejet 4215 all in one on a HP Pavilion slimline with Vista, I log in under myself and I am an administrator, When I run the cd to install it shows that I need to be logged in as administrator, any help out there ?

I am not sure why the HP software needs to recognize your airport. That's a function of the OS. Can you be more specific about the problem you are having? Do you have some screen shots? Is the Macbook connected to the router?
If the HP printer can't recognized the router, that's a different story. You'll need to plug the Macbook into the printer (by cable) to config it (that's typical). You may need to assigne the printer its own static IP address (which I would advise doing anyway). That way you can always find it and it will make setting up network printers on other computers a bit easier.
DB

Ovi suite 2.2.1.23 will not install with Xp/SP3, o...

I got a new N8 on 24 Oct 2010 - lovely phone. I downloaded latest Ovi 2.2.1.23 and tried to install it in XP Pro /SP3 PC which has all the latest fixes, and also PC suite installed. . Installation completely failed, and uninstall also failed . Now left with system telling me that it cannot uninstall older version of Ovi.
Tried again on another XP/SP3 PC which had never had any Nokia s/w on it. Install went OK but Ovi crashed immediately I tried to sync calendar or contacts on N8 with Outlook 2003, and keeps crashing despite several install & uninstalls.
Nokia tech support tell me that
1) PC Suite does NOT need to be uninstalled before installing Ovi.
2) N8 & Outlook 2003 ARE (or should be) supported by Ovi 2.3.1.23
3) They do not have a solution to this problem!!!!! Only recommendation is to revert to XP/SP2 but I won't do this because Microsoft no longer supports SP2.
My solution: sadly to return phone to O2, and choose one from a different manufacturer.
What a shocking tale.

sorry -meant to add that PC suite works well with XP/SP3 & older phones such as 6630 6230 6300 but it does not support N8, so I can't use that option.
Come on Nokia - you've already lost my business, but what about all your other customers?!

How do I enable the blue function keys on an old Pavilion N5445 with Windows XP?

Yes, how do I enable the blue function keys on an old Pavilion N5445 with Windows XP?
The blue function keys currently do not work.
There is NO mention of the function keys (or even action keys) in the BIOS.
Let me repeat that so that nobody posts a stupid link to how to turn on the function keys in the BIOS. THIS IS AN OLDER LAPTOP.
There is NO mention of the function keys (or even action keys) in the BIOS.
There is NO mention of the function keys (or even action keys) in the BIOS.
There is NO mention of the function keys (or even action keys) in the BIOS.
There is NO mention of the function keys (or even action keys) in the BIOS.
There is NO mention of the function keys (or even action keys) in the BIOS.
There is NO mention of the function keys (or even action keys) in the BIOS.
Somehow the function keys got turned off. So I suspect there's a way to turn them on again.

HI Lukon:
Thank you for your post. I will do my best to assist you in this endeavor!
I regret that you are experiencing an issue with the function keys. I am providing you with a link to "Configuring the Multimedia and Internet Keyboard Buttons in Microsoft Windows 98, Me, and XP" click here. Have you tried running the HP Support Assistant to look for updates and resolve issues. click here. Have you tried the MS Fix it tool click here to aid it resolving it. I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Extended router's network for Airport extreme. Works well with MacbookPro. I can print with notebook with XP SP3 and, I can see the USB-harddisc in the Airport service program but, I cannot use it. I have set filesharing etc. What do I do wrong?

I connected the Airport Extreme wireless to the existing network of my router. At the Airport there is connected via USB a Printer and three hard discs. All works well on my MacBook Pro - I can print and use the hard discs. On my notebook and my desktop, both with XP-SP3 I can use the printer only. In the Airport service program - manual set up - hard discs I can see the drives with the correct names but I cannot work with it. I don't find neithe the Airport Extreme nor the drives in the Windows Explorer. Of course I've set 'filesharing' etc. What do I do wrong? Where is the mistake in the set up?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

How to use jdk1.3 with ias60 sp3

I installed jdk1.3.1_01 on my computer and compiled all my code with it.Now i want to use jdk1.3 VM in iplanet6 sp3 instead of 2.0 VM? How would i do that?

Hi,
Unfortunately iAS doesn't go well with JDK 1.3. I have tested the
results and I've posted the result of testing in this forums. Please
refer to that for more errors on using JDK 1.3 with iAS SP3.
Regards
Raj
Mansoor Quraishi wrote:
I installed jdk1.3.1_01 on my computer and compiled all my code with
it.Now i want to use jdk1.3 VM in iplanet6 sp3 instead of 2.0 VM? How
would i do that?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

How to calculate Min & Max temperature with just air temperature

Hi Gurus,
I have a requirement in which I have to build a Bex Query in which I have to find the Min & Max temperature of a day if a specific date range is used in the query.I have checked the multiprovider and there is only one field available
which is "Air temperature" and it's a KF. I have built a query which will give you the temperature for the day if you give a particular date range.
My question is,is it possible for me to find the min and max temperature with just air temperature as input?
Please let me know your thoughts.
Thanks,
Raj

Hi,
You have to create two KFs for Min and Max temperatures,
In Min Temp KF definition, Aggregation Tab-->Minimum--> reference char as 0calday
In Max Temp KF definition, Aggregation tab-->Maximum-->Reference char as 0calday
Regards,
Suman

HP Advisor stops working on my Pavilion p6330f with Windows 7 Home Premium 64 bit system

My computer is a Pavilion p6330f with Windows 7 Home Premium 64 bit system. It bothers me when I get error messages and can't seem to correct the problem. After loging onto my computer a message comes on that the HP Advisor stopped working. When I attempt to load the HP Advisor it gives me the same message and does not come up.

HP Advisor-one of the first things I uninstall, flaky software.
Have you tried the update for Advisor from your support & drivers page?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4120...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Palm Hotsync conflicts with XP SP3?

My Palm Hotsync was working perfectly fine...until I updated my Windows XP with Service Pack 3. Now when I try to sync, I get an error message saying that the connection could not be made. Occassionally, if I re-download the Hotsync, that will let me sync once, but then I run into the same problem. I'm loathe to uninstall SP3 since that has a lot of security stuff in it, but nothing else seems to be working...
...I've done the soft reset and the system reset, and followed every step in the Palm help section. I've also chatted with a Palm rep who couldn't seem to find the problem either.
So, has anyone else had this problem? Was it SP3 or something else? How did you resolve it?
Thanks...
...Beau Jest
Post relates to: Treo 650 (Sprint)
This question was solved.
View Solution.

I have a Treo 680 and I spent about an hour on the phone at my computer with tech support from Palm trying to resolve this and when it
was all said and done I still can not get my calendar and contacts to sync. Tech support told me that I have a corrupted database and that
there is problems with the SP3 and the hot sync manager. They told me they were working on it but couldn't give a timeframe for when
it would be fixed. I can not remove SP3 from my computer. I have enough issues already with security without adding to it. Palm needs
to fix this problem right away.
Post relates to: Treo 680 (AT&T)

Getting my HP Pavilion g7 with Windows 7 back to normal after a system recovery.

I did a system recovery for my HP Pavilion g7 with Windows 7 and have all of my files on a SanDisk thumb drive. How do I get my laptop's files, folders, shortcuts, applications, etc. all back to the way they were?

Hello marinegf. I understand you've lost your sound after performing a System Restore.
What is the product number for your notebook? There are many versions of the HP 2000 and this will make it easier for me to locate any appropriate software. This document can show you how to identify the notebook by the product number.
Also, it may be helpful to know what issue you encountered which led you to perform a System Restore.
The first suggestion I can offer you is to run Microsoft's Audio Troubleshooter. Here is a link to the utility.
If the troubleshooter is unable to resolve the issue I suggest you next try removing the driver and allowing Windows to perform the reinstall. I assume you're using Windows 7, so these instructions will be for Vista/7.
Click Start, type "Device Manager," and press Enter.
Expand the "Sound, video, and game controllers" section.
Right click on your audio device and select "Uninstall."
Reboot your computer and allow Windows to perform the reinstallation of the driver.
Verify whether or not you have sound and post the result!
I'll keep an eye out for your reply. I hope you have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

InDesign CS3 incompatible with XP SP3, which will soon be an automatic update

A couple of months ago, after I had instability problems, I was advised by Adobe Support that Windows XP Service Pack 3, which I had installed, was not recommended for use with InDesign CS3. I am advised today that this is still the case.
This is now a critical situation for the many people who use Indesign CS3 with Windows XP. ComputerWorld reports this week that Microsoft has said that the SP3 upgrade will "shortly" no longer be optional, but will be forced on people as an automatic update.
I discussed this with Adobe Support today and was advised that I could turn off automatic Microsoft updates via the XP control panel. Well I knew that, but it is not a good option because it will turn off automatic updates of other important elements, such as security fixes.
This is a most unsatisfactory situation and Adobe has had plenty of time to sort it out. We need to know when a patch will be available and there should also be a system whereby Adobe can advise XP users when the patch comes available. And Adobe needs to get it's act together urgently, to produce the fix.

Matthew - if you see no problem with the XP SP3/Indesign CS3 combination, why don't you tell your phone support people?
When I had my original problems, a large book design file was continually freezing. When I rang support (Asia-Pacific), I was told unequivocally that CS3 should not be used with XP SP3.
I rolled back my service pack upgrade and still had problems, so the problem may well have been some corruption that had entered my InDesign file.
However, with that book awkwardly cobbled together and out of the way, last week I rang Adobe support again, to see if any of the recent CS3 updates had made InDesign CS3 compatible with SP3 and again was told it wasn't. Their documentation said it was OK with XP SP2 and Vista, but not SP3.
This needs to be properly sorted out.

My Pavilion dv1000 with XP SP3 temperatur​e is terrifying

Similar Messages

Maybe you are looking for

My Pavilion dv1000 with XP SP3 temperature is terrifying