My printer sharing is not working,I get this error "job stopped on server"

I recently turned on printer sharing on my mac mini that my printer is connected to. I am trying to prince from my mac pro. It shows the printer as an option to print and I have set it as the default printer. It can find the printer and starts to print however as it is spooling it gives me an error message of "job stopped on server"? I'm not sure what the issue is, I am printing to an HP Officejet Pro L7600.

The way 'Sharing" is used, it means the act of making the printer vailable for all to use. There is no special term for just using it once it is "Shared".
If not that, It could be one of two possibilities:
1) take the message at face value. Log on to the Mac that holds the printer, and make sure the printer is not "stopped". If it is, tell it to "resume".
2) something else is going on. This is most often caused by confusion over Printer setup. Things like the wrong protocol (access method) or a stale driver. Your printer manual should have Mac setup information to guide you.
Printer drivers change so fast that the one that shipped in the box will be stale by the time you open the box. Check the manufacturer's Web site for the current ones, or run Software Update to get new ones from Apple if needed.

Similar Messages

Printer sharing is not working anymore! Any clue as to why?

I recently switched to Lion. I have a network consisting of a Mac Mini and a Macbook Pro. I have a Canon Imageclass MF4350d I'm not sure if it is related to Lion but I don't think so as the printer sharing feature was working well for a day after installing it. At a certain point, my Mac Mini (server) went down and we had to repair the drive, which included repairing permissions. At this point I had to plug my Macbook Pro directly into the printer which worked fine after downloading the driver. I assume this would not affect anythign but just including it in case. I also installed a new router during this time. Lots of changes at once, not good! Anyway, after this, I attempted to print with printer sharing (printer sharing is turned on) permissions set to everyone and it didn't work. The Macbook Pro is able to see the shared printer, is able to share files through file sharing on the Mac Mini yet when I try to print nothing comes out and eventually I get an error message saying it was not able to connect to the printer. Initially, the Mac Mini would not even print, but I reset the printer system, reinstalled the driver and got it working to print through USB. However this did not resolve the printer sharing issue. I have reset both printer systems multiple times,and reinstalled the driver on both machines. Still the same message, basically the Mac Mini now prints, however the Macbook Pro can't share the printer. It used to work very smoothly. Any clue as to why this could be happening? Any suggestions very appreciated!!!

I cleaned out my macbook a few nights ago to make it fresh for summer.
What did you clean and how did you clean?
If you used a kind of spring-cleaning app, it may have been too eager and cleaned necessary caches where the Photo Stream is living on your Mac.
If the photos that have been downloaded from the Photo Stream are still on your Mac, you should be able to find them in cryptically named subfolders in the iLifeAssetManagement folder in your user library
/Users/your short user name/Library/Application Support/iLifeAssetManagement/assets/
Are there still photos there? Then make a backup copy of the photos, before they will vanish.
Léonie

I/o server shared variable not working in deployment system ( error no-1950679034 (0x8BBB0006) (Warning))

Hello ,
am using shared variable from opc client in labview when am run a exe file at development system its working fine but when am running it in deployment system its not working am using same configuration file in opc server at development and deployment system error -1950679034 (0x8BBB0006) (Warning)

First Root cause needs to be identified before any actions.
I would suggest first check if you can access the shared variable hosted in PC from RT using other ways like using SVE API (Logos and PS protocols, Datasocket etc..)
Check if antivirus or firewall is playing...
Check the same experiment with some other PC if you can.
You can also try creating another Shared Variable in RT and binding the same to the PC and try to access it...
Since you have did all the reinstallations already
Best Regards,
Vijay.

TS1412 Itunes will not install, I get this error message. There is a problem with this Windows Installer package. A progran run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

I Tunes will not install. I get this error message: There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Does anyone have an answer?

TRy the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

OSX sometimes places 31 character limit on file names. How can I get this error to stop?

This error notice doesn't make sense, since many of my file names exceed 31 char. This error message pops up when saving documents, esp. web pages. As a consequence, OSX will refuse to let me save the file, until I shorten the name and so remove informative identifying features of the file name. But most of the time, OSX is perfectly happy to save files with names longer than 31 char. How can I get this error notice and block to turn off?

I have also seen this issue it occurs regularly when transferring word documents files from my Macbook Pro running OSX 10.5.8 to my iMac running 10.9.4.
My iMac HD should be formatted to factory standards as well since I have not mucked around with it since I bought it.

Printer not working i get an error message of ink sytem failure : oxc19a0007 please help

HP photosmart all in one Model CD028A using windows 7 64 bit. It was working one week ago

Here is a support document that will help you with this error message.
Follow the steps in the document.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Itunes not working-keep getting an error---please help

Everytime I try to open my itunes I keep getting the error "Itunes cannot run because it has detected a problem with your audio configuration" Does anyone know what I can do to fix this. I have aready reinstalled itunes to my computer. I haven't used itunes for a few weeks but I dont know why its not working. Please help!!!
Thanks
Compaq Windows XP

"Itunes cannot run because it has detected a problem with your audio configuration"
that one is typically caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
the following document may be of some assistance:
iTunes 7 for Windows: iTunes had detected an audio configuration problem

Update will not work, I get an error message that says error 7 (windows error 126

The new update will not work for me, I am running Windows Vista. I have never had any problems installing updates before, but this time I get a message
So I found the directions to uninstall itunes, I uninstalled itunes, apple software update, then I am unable to uninstall apple mobile device support. Since it says to uninstall them in order, I didn't go any futher. I did restart and got this message
I tried redownloading and reinstalling but I am back to where I started from, can someone HELP?
Thanks

This is asked and answered dozens of time each day. A forum search (right side of this page) will find answers to many questions like this quickly.
Disable your firewall/security software and try again.

Hello, I am trying to upgrade to yosemite, but I get the "disk cannot be used to startup your computer" error. Resizing the partition does not work, I get the error "MediaKit reports no such partition" probably because I installed linux in dual boot

Hello, I am trying to upgrade my macbook pro to yosemite, but I get the "disk cannot be used to startup your computer" error.
Resizing the partition does not work for me and I get the error "MediaKit reports no such partition" probably because I installed linux in dual boot and the disk manager is lost.
Anyway to tell the yosemite installer that it should not pay attention whether the disk is bootable or not ?
If I am doomed, any way to delete the installer and downloaded OS from my hard drive ?
Thanks for your help

As usual, the Linux installer wrecked the partition table. You would have to boot from your OS X installation disc and repartition. Doing so will of course remove all data from the drive, so you must back up first if you haven't already done so.

While installing latest update I lost ability to open Itunes. Getting "runtime error" and then next box says error 1114. Tried uninstalling and reinstalling and does not work. Getting same error. Very frustrating.

Cannot open Itunes after trying to install latest update. Getting runtime error and then error 1114. Tried uninstalling and reinstalling and still getting same error. How do I fix this. Very frustrating!

Hi there,
Earlier iTunes (and supporting applications) need to be completely uninstalled before you can install the new version. Here's the complete Apple info on this: http://support.apple.com/kb/HT1923
Mobile device application will most likely fail to uninstall, so you would need to visit its location(s) and manually delete the files then folder(s). The location of the folders is documented in this link from Apple.
It's a pain, but it should work.

IPhone not working, I get this message

The iPhone could not be restored , an unknown error (3014) occurred .
I took the phone to an apple store and they reset it/erased everything .... Still didn't work. Someone please help.

If it still doesn't work take it back and ask for a replacementor buy a new phone.

When I try download new os 5.1.0 on my iPhone 4 I get this error message "stopped (err = -3259)" after it has downloaded. Has anyone had this problem and if so what is the fix.

When I try to download iPhone OS 5.1.0 on my PC I get this message "stopped (err = -3259)"and says it timed out at the server after the entire download. I have tried 3 times, it takes about 8 min. to download the 790.7 MB file. Has anyone had this problem and what is the fix?

See "error -3259" here.

HT203174 Anyone getting this error message: stopped (err = 12004)? If so, please help.

I've subscribed to The Art of Wrestling with Colt Cabana.
I'm located in Canada, and that shouldn't be an issue.
I'm trying to download episodes, but they won't download.
I'm getting this message in the status:
stopped (err = 12004)
I need to know how to fix this.
Thank you.

See "error -3259" here.

When installing add ons i get error 228 the fixes in help do not work, still getting the error. firefox 3.6.3 OS X 10.5, any other fixes?

I was trying to install the DOM inspector and Firebug. Firefox 3.6.3 in OSX 10.5 Leopard. Just to make sure I tried a couple of other plug ins. Each time error 228 comes up. I already tried the fixes in the help with no success.
== Tried to install Firebug

@cor-el thanks for the suggestion. I think it allowed me to find the problem. for some reason the file download does not initiate. I have no idea why. I will trying doing a fresh install of firefox.

How come every time I close the app, I get this error message: Adobe QT32 Server CC 2014.2 has stopped working

I have the error message box saved as a PDF, but can't post it here. Anyways, if anyone has any idea how to stop this from happening, I would greatly appreciate. [email protected]
Thank you!

I'm having the same problem on Windows 8.1 with the latest version of PP CC. I seem to only have this problem since the last update, although I don't necessarily edit every day. The problem mostly occurs when I close a project and exit PP, but I have had it a couple of times while the program is open.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe QT32 Server.exe
Application Version: 8.2.0.65
Application Timestamp: 5486d9b1
Fault Module Name: QuickTime.qts_unloaded
Fault Module Version: 7.76.80.95
Fault Module Timestamp: 542dbdf4
Exception Code: c0000005
Exception Offset: 0005ccf9
OS Version: 6.3.9600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: 5861
Additional Information 2: 5861822e1919d7c014bbb064c64908b2
Additional Information 3: a10f
Additional Information 4: a10ff7d2bb2516fdc753f9c34fc3b069

My printer sharing is not working,I get this error "job stopped on server"

Similar Messages

Maybe you are looking for