My projects icons turned to orange in Aperture? I must have pressed a button without noticing it. What does that mean, and how can I get them back to normal?
My projects icons turned to orange in Aperture? I must have pressed a button without noticing it. What does that mean, and how can I get them back to normal?
My projects icons turned to orange in Aperture?
Ana Candano, what is your Aperture version? Earlier Aperture versions - until Aperture 3.2.4 had colored icons, Aperture 3.3 and later are gray in gray. Do you have two versions of Aperture installed?
When you post back, list your version of MacOS X and the versions of any Aperture.app you can find with Spotlight on your Mac.
Frank, the thread you pointed to, was a different question, but probably is related. It would be good to know how it has been resolved.
Similar Messages
-
I am trying to finalize a movie project and I get an "error in user parameter list" message. What does that mean, and how can I fix it?
what movie editing software are you using?
-
Hi
I dropped my macbook yesterday and it turned itself off. When I tried to turn it back on all I got was a white/gray screen with a flash folder with a ? in the middle of it? What does this mean and how do I get it to stop so I can log onto my laptop?Deev
Normally the question mark on the gray screen means it can't find the operating system. Have you tried booting up from the installation DVD? Do that, and when you come to the screen where it wants to begin a system installation you'll notice in the menubar where it say's utilites. Click on that and choose disk utility. from there choose your disk and try to verify and repair the disk. If you can you may want to also try and new install of the system. I don't know how much critical data you have, but reinstalling is an option. did you purcahse you from an Apple store? If you did you may want them to look at it. Hope this helps.
Regards,
Joseph -
I am being told that "Back to Mac" isn't working because NAT Port Mapping is turned off on my router. What does that mean and how do I fix it?
AirPort Utility is in your Utilities folder:
-
My Iphone 4s is plugged in charging after it has fully died. Instead of the apple appearing and staying constant on the screen...the apple is blinking. What does this mean and how do I get the phone to charge/turn back on.
- Try:
iOS: Not responding or does not turn on
- Next try letting the battery fully drain. After charging for a least an hour try again
- Last, make an appointment at the Genius Bar of an Apple store, it appears you have a hardware problem. -
Turned phone off & now it won't turn back on (The Apple icon appears, then disappears).. After trying a cold reboot the itunes icon appeared, but phone still wont turn on. What should I do?
First try: Shut down Mac forcefully. Press the button to start & hold down OPTION ke once youo see white screen. Boot disk selection window will appear. From here select your drive to boot into Mac.
-
Hey I just got an iphone 4 and everytime it gets to around 47% battery it dies, when I try to turn it on it says the battery is dead, when i place it in the charger it says 47% then continues to charge, could this be over heating or a bug? What is it and how do I fix it?
Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers
Make sure that Mute is not enabled.
2. Remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it.
6. System Preferences > Sound> Sound Effects
Play sound effects through:
Select "Internal speakers" and then back to "Selected sound output device". -
Sync Icon on Menu Bar? What does this mean? How can I get more info on it?
I just noticed for the first time, a SYNC icon on the Macbook Pro/Lion menu bar and it is going strong - twirling its little heart out. Im not sure what this is or what it is doing. Im having a feeling something got set up (I dont really know what Im doing ) that had to do with maybe syncing a calendar with Google? for an Android phone? Is t here a way I can check out what this is and what its doing - It just keeps twirling around so Im not sure what its doing or how long it will take and I dont know that I want it doing wh atever its doing. Maybe it has something to do with contacts? The only option I can find when I click on the icon, it says 'cancel sync.' Is there a way to "get info" - and find out what its doing. I dont want it twirlling forever as I assume thats going to eat up the battery...I dont have anything set up to sync consistently so I dont know whats its doing or whether I should stop it. Its been going on for like over 5 minutes and that doesnt seem right to me
If it's a one-time "glitch," you can try restarting your computer with the iPod still connected. Try ejecting again after the restart.
If the problem recurs, you may have a process running (other than iTunes) that is accessing the iPod's storage. When connected, the iPod's "disk" is like other mounted volumes. This process may be some type of utility that continously monitors your mounted volumes for security reasons, such as to prevent access by malware.
If you know of such a program that you have running in the background, there may be a setting to exclude your iPod's disk. -
The back light turns on and I can hear the click wheel but no apple sign comes up on the screen. Any guidance would be much appreciated ;)
It's possible that your iPod is working to some extent (since the backlight is on and the click wheel makes a sound when used), but the LCD screen is not working. First, try doing a Reset (which restarts the iPod)
http://support.apple.com/kb/ht1320
Even if it is still not working, does anything change after doing the Reset?
If that does not help, when you connect it to your computer's USB and run iTunes, does it appear in the sidebar under DEVICES? If it does, select it in iTunes and try doing a Restore. The Restore button is on the iPod's Summary screen in iTunes. This will erase the iPod, reinstall its software, and set it to default settings.
If the iPod does not appear in iTunes when connected, or if doing a Restore does not solve the problem, the cause is likely to be hardware-related. -
I can't seem to complete downloading the new version of Firefox. I got to the point where it said to drag the icon to the folder, but then I got the message that I don't have sufficient privileges to do that. What does that mean and how can I complete the download?
Thank you.You can ignore that.<br />
That is referring to the time stamp of the Firefox 6 file that is older than the time stamp of the Firefox 3.6.x release. -
I ran repair disk permissions an all my photos in aperture are gone. How can I get them back?
I ran repair disk permissions an all my photos in aperture are gone. How can I get them back?
If you've turned on "Find my iPhone" on the device you can track its location at iCloud. The device must be powered on and have internet access to be located.
Doubtful you ever backed up your "camera roll" to iCloud but you may have backed it up to your computer via iTunes. You can "restore" that backup to your new iOS device but you can't view the contents of that backup and pick out pieces of it. -
I lost my safari and mail icons. How can I get them back in the screen?
I lost my safari and mail icons on the ipad screen. How can I get them back or where can I find them?
Have you checked all your homescreens and app folders for them, and do they show on the iPad's spotlight search screen (swipe your first homescreen to the right and type in Safari or Mail) ?
Safari can be hidden via Settings > General > Restrictions > Safari being 'off', so you could check that as well.
If you still can't find then try a reset and see if you can find them after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot
There is also Settings > General > Reset > Reset Home Screen Layout which will reset the layout of your apps and might make it easier to find them. -
I went to my system preferences today and they are all gone except for my language and text icon! I have the language and text icon but that is the only icon that is displayed! where have my system preferences gone and how do i get them back??
Double click on the picture of the HD on your desktop, then look at the bottom of the window that opens.
First check the S.M.A.R.T. status on your HD: Applications > Utilities > Disk Utility > in the panel at left, select the first item in the list/your HD mechanism > look atthe bottom of the main window next to S.M.A.R.T. status and see if it says “Verified” or something more ominous like “Failing.”
If S.M.A.R.T.status is "Verified," run Repair Disk: Boot from install disc (insert disc > restart > immediately hold down c key and keep holding it until you see “Preparing Installation”) > at first screen select the language and click Continue > click on the Utilities Menu in the menu bar > open Disk Utility > select your HD in the panel on the left side > click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications > Utilities > Disk Utility and run Repair Permissions. -
HT4623 The icons for my camera and facebook have disappeared. How can I get them back
I installed IOS6 recently on my IPhone and now my camera and facebook icons have disappeared. How can I get them back? Help!
For your camera, go to Settings>General>Restrictions and be sure that Camera is set to On. Don't know why you can't find FB, be sure you checked all your screens and inside all your folders.
-
I'm new to photoshop cc 2014. As I try to type in the text box my text won't show up and every time I click on the layer it alway progress rendering type? What does that mean and is there a way I can turn it off?
Check online with the web site of the maker of your video card for an updated driver (assuming you're running Windows).
-Noel
Maybe you are looking for
-
Send to a Particular Person in the Role
Hi, I would like to implement sending the task to a particular person in the role. Currently, GP will send the request to all the personal in the Role. How do I control in such a way that there is only a task send to a particular person of concern of
-
Impossible to use an Amex payment method in Luxembourg
I am trying to change my payment method from a no longer valid Mastercard to an Amex card. Unfortunately, the system does not let me submit an Amex payment method from Luxembourg - "Your payment method is not valid in this Store. Please enter a new p
-
Sales documents type - sales to employees
Hi Experts, I am working on sales to employees scenario. I want to create sales document type for these sales. Scenario would be employees buy products from factory shop and pay for the products in cash and take them away immediately. What aspects sh
-
in recent dowwload of I tunes-how do you purchase items listed in your wish list. There are 5 choices beside each song but none say-"purchase this song. Where do you go to actually purchase songs?
-
How can I start the Oracle services for windows?
I started the oracle services by order : ifs: 1.tnslistener 2.iasdb 3.oid 4.processmanager 5.OEMwebsite mid: 1.webcache 2.discoverer 3.processmanager Is the order correct?