My site looks ok in IE but not in FF - I have validated my code

Hello
my site is www.pondviewtech.com
I have validated all of my pages of my site at validator.w3.org. I had errors and fixed them and now they all pass. My site still does not display properly in FF. I looked through my code and I can not find anything that sticks out. I read that % are not good to be used in the code for firefox but I do not have any of those. I searched for a FF code validator but all I could find were add-ons.
I attached my index.html file. I didn't create the site so if it is a total mees it will not hurt my feelings if you say so.
I am new to this so any direction would be helpful.
Thank you very much for any help
Larry C

It is a bit of a mess in there. Your floats are getting tangled up. I'd like to see you have contentLeft2 and contentRight2 both floated left. Make contentLeft2's markup come BEFORE contentRight2's content. Perhaps something like this?
<div id="contentLeft2" style="float:left;width:300px;clear:both;margin-right:10px;">
        <p class="style24">ACS can help your firm...</p>
... snip...
        <p class="style46 style51 style54"> </p>
      </div>
      <div id="contentRight2" style="width:460px;float:left;">
But it still doesn't look right in CS4's Design view, and it should. Hmmm....

Similar Messages

Dreamweaver text looks fine in Safari but not Firefox NEED HELP!!!

Dreamweaver text looks fine in Safari but not Firefox, all my text goes out of alignment and the fonts look like different sizes. Please let me know your thoughts. Here is a link to the page I'm having problems with. http://www.alexandrasantibanez.com/bio.html

I had the same problem for days what a waste of time trying
to figure out code... the code was fine. I was running flash player
7.0 Upgrade your flash plugin to 9.0 and it should work fine in
Firefox and IE. It did for me.

I can't load pictures to online site... Iphoto works but not aperture. I have edited photos that i exported to an external drive but they will still not load to Walgreens for printing. Does anyone know what I can do?

I can't load pictures to online site... IPhoto works but not aperture3. I have edited photos that I exported to an external drive but they will still not load to Walgreens for printing. Does anyone know what I can do?

Are you shooting RAW? Are you exporting masters or versions? Is there a size limitation on the Walgreens site?

HT2998 Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP

Hi, I try to conect Mac Mini from 2009 with my HD Tv Samsung F 6400 . With Mini Dvi conection and adapter to HDMI input in TV I got picture but not sound! I have analog cable from the phones out from mac but imposible to conect to TV? Can you HLP?

You really need a newer Mac Mini with a true HDMI output, because that Mac Mini's DVI output does not support Audio.
You might try a 3.5mm to RCA adapter
from the Mac Mini's headphone jack to the TV's audio input,
but that would require being able to select the Audio input in the TVs menu while using it's HDMI input.
Optionally you could also use an external 2.1 Speaker System or patch the audio from the Mac Mini to your home stereo system to enhance that older Mac Mini's audio.

I can't send emails via mail. I can receive but not send. I have set up gmail on mail. Any ideas?

I can't send emails via mail. I can receive but not send. I have set up gmail on mail. Any ideas? No problems with the set up previously to this.

Go to Mail Preferences- Accounts and confirm you are providing Gmail what they require to send and receive mail. And DON'T specify Secure Socket Layer. Some mail accts don't like SSL
Good Luck to you.

What can I do I got my iPad fixed at a different brand place but not apple and I have ended up a few weeks later with dust inside my screen is their anything apple can still do for me?

What can I do I got my iPad fixed at a different brand place but not apple and I have ended up a few weeks later with dust inside my screen is their anything apple can still do for me?

If another person or company serviced your iPad, your warranty has been voided. Apple will do an out-of-warranty exchange. Have you contacted the original service provider, and complained?

No sound. Mute is not checked, volume all the way up on iTunes and on status bar. What am I doing wrong or missing? I restarted last night and it worked before that but not since, any one have any ideas?

No sound. Mute is not checked, volume all the way up on iTunes and on status bar. What am I doing wrong or missing? I restarted last night and it worked before that but not since, any one have any ideas?
Thanks, Rob

First off did you go to System Preferences > Sound > Output > And is the correct output selected?
Any red light coming out of the headphone jack? If so, you'll need to re-set the little switch in there by inserting a 3.5mm jack carefully in & out 20 odd times. Or grab a toothpick (non-conductive) and a flashlight.
Tried anything else that produces a sound? On restart do you get the chime? Perhaps check into Audio Midi Setup to ensure your output is selected correctly using the cog at the bottom left.

Firefox shows in tasks but not on desktop. Have uninstalled and reinstalled but no change

I was using Firefox ans suddenly it will not show on desktop. It shows in Task Manager but NOT on desktop. Have uninstalled and reinstalled 3 times to no avail. Can you help? I hate all the other browsers!

Are you sure there is no problem at the source? Have you tried contacting the publisher to see if they are sending the right files? And the format of the files?

Hi my phone is disabled and asking me to conect to itunes but when i conect to itunes it says can not conect as u have to type code first on ipone ....help pls

hi my phone is disabled and asking me to conect to itunes but when i conect to itunes it says can not conect as u have to type code first on ipone ....help pls

If the phone is actually working you can reset it fron the handset, but yours does not appear to be working. Be sure you are using a good cable and the cable is connected directly to a USB port on the computer (not a hub). Follow the instructions carefully in that link; the computer will not recognize the phone until it is in Recovery mode, and it's complicated to get it there. If you have followed the instructions exactly and it still is not recognized in iTunes. try removing and reinstalling iTunes: http://support.apple.com/kb/HT1925. If that still fails try a different computer, and also try restoring from DFU mode (Google is your friend).

On my iPad I can only send I messages but not all my friends have apple products how can I set it up that other messages are send to

On my iPad I can only send iMessages but not all my friends have an I pad or iPhone how can I send other messages too

You will need to download a texting App from the App Store. I have seen Text + recommended on the forum.

My 4-year old AirPort Extreme intermittently drops out (no signal to my iMac Book). The laptop shows reception of other nearby Wi-Fi transmitters, but not mine. I have changed the bands, but the problem comes back. Transmitter problem or interference?

My 4-year old AirPort Extreme intermittently drops out (no signal to my iMac Book). My hard-wired iMac still has internet capability. The laptop shows reception of other nearby Wi-Fi transmitters, but not mine. I have changed the bands back and forth, but the problem comes back. How can I check if it is a transmitter problem or interference?

Let me see if I can suggest a strategy.
I have talked with my ISP and he said that I am not the only one with an Airport Extreme with the same issue. He said to try to write the DNS direclty, rather than using the Auto settings - still nothing works.
What modem do you have and what sort of broadband?
What mode is the AE in.. router or bridge?
I have an Airport Express from 2010. Since about a month and definetly since yesterday, I cannot connect any device via Wifi to it although LAN connection works correctly.
Is this express or extreme.. the rest of the post you refer to extreme.
What is the actual model number of the AE? A1xxx from the base or the part number MCxxx from the box.
If the AE is bridge.. I want you to try a different method.. put it in router mode.. don't worry about double NAT but ensure the IP range of the modem /router is different to the AE.. so if one is 192.168.x.x then the AE on default at 10.x.x.x is fine.. if the main router is 10.x then move the AE to 192.168.x.x
Make sure the guest wireless is off.
Using a 5.6 utility on your 10.6.8 OS mini go to the log and see if the wireless is registering..
You should see lists of wireless connection like..
Post as many screenshots of the setup as you can.. it helps loads.
IPv6 is starting to become a pain.. try it off and try local link and try auto.. in the computer.

Site works in the app, but not in the browser.

Hello iWeb experts,
I've got problems.
Last night I published my site. And while it appears, and functions, properly in my iWeb app, it doesn't do the same in Safari, Firefox, and Internet Explorer.
Two issues...
FONTS
I chose Bellamie, Univers Condensed, and Marydale as my fonts. From reading these forums, I've discovered those won't wysiwyg on other computers if the fonts aren't available and open on them. So my two choices are to make every bit of text a graphic or to use a set of more universal fonts, correct? So my questions are...One, is there a list somewhere of fonts that will work in any browser? And, two, is there a short-cut, or easy way to transform type into a graphic without having to create image files?
FUNCTIONS
Here are the functions that work fine in iWeb but have gone haywire in all of the browsers I tested...
• The type in one nav link appears smaller than all the rest.
• Some links are active, others are not.
• Rollover highlighting works on some links, but not others.
• Most of the rollover links appear in the proper static color, a few do not.
I've tested these functions on three Macs, one PC, and in the three browsers mentioned above. All of them show the exact same problems. So something must be going wrong with iWebs coding, or my host server musn't like iWeb.
Any thoughts, suggestions on these two issues? Thanks much for any advice.
John
PS - For reference, see: www.johnrunk.com

Fascinating, Kirk (+he types with one raised eyebrow+).
QuickTimeKirk wrote:
When I drag across your page most of your links do not change. The "text" portion of them doesn't change, either. Something is covering them.
I can see that. But for the life of me, I don't know what could be covering those links. In my app, when I click in the area of the links, the type is the first item selected. Unless, possibly, it could somehow be the faint reflection of my black-and-white image (me & the ground I stand on). Hmmm...
QuickTimeKirk wrote:
Single click (outside the boundaries of your page contents) and an "outline" will appear. It shows the image file dimensions and locations.
This I don't see. An outline? As in "an object outline," or as in "a list of dimensions and locations?" When I click outside my page contents, I get nothing.
Thanks, QTK. I truly appreciate your troubleshooting here.
John

Occasionally Firefox 3.6.12 won't display photos on certain sites. Reloading works sometime but not alwasys.

At times on auction some sites such as ebay, (and others), photos won't display. If I press the reload button there's a chance the photo will display. If reload doesn't work the first time, pressing it 3 or 4 times may work but not always. Closing the site then re-opening works sometimes but not always. Annoying.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Help with Importing psd's, looks good in viewer, but not in canvas...

I have been searching for threads related to this issue, and this is what i've come up with...
It is my sequence settings, the picture looks great in the viewer but not in the canvas, as soon as i put it in the timeline, it goes blurry almost. I tried changing my settings to HD 16:9 and the picture looks great, but I need standard (NTSC DV 4:3), does anyone know a way around this? I can do it in Avid fine, why am I having such a hard time in FCP?
Thanks
P.S i have tried changing my image size in photoshop to 720x480 and 720x540 and it doesn't seem to make a difference.
Jana

The canvas is a low resolution proxy.
What does your sequence looking like on your NTSC production monitor?

My dreamweaver site is broken in FireFox but not IE. How can I fix this?

I have just designed my first real site using Dreamweaver CS4. It looks right in IE but is broken up and ttotally wrong in FF.
The site is: www.midsouthsportsmedia.com
Why is this and how can I fix this to work in FF short of starting over.
Any help will be appreciated
Barry

I see a similar Path Problem with the background images in your CSS:
#middle {
    background-image:url(file:///C|/Users/Sean%20Sullivan/Desktop/MSSM%20Web%20Files/Night%20C lub/Original%20Site%20Files/images/middle.gif);
    width:873px;
    height:21px;
#middle2 {
    background-image:url(file:///C|/Users/Sean%20Sullivan/Desktop/MSSM%20Web%20Files/Night%20C lub/Original%20Site%20Files/images/middle2.gif);
    width:873px;
    height:22px;
#content {
    background-image:url(file:///C|/Users/Sean%20Sullivan/Desktop/MSSM%20Web%20Files/Night%20C lub/Original%20Site%20Files/images/content.gif);
    width:873px;
and there are more....
HINT: Rename files, folders and images without SPACES.
Between words, you can safely use underscores _ hyphens - or UpperAndLowerCaseLetters. But please don't use spaces.
Best of luck on your new site.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

My site looks ok in IE but not in FF - I have validated my code

Similar Messages

Maybe you are looking for