My Windows Vista is Not Working

I was using my Vista side of my iMac a few days ago when i was prompted to install an update now every time I click on the icon I get an Error message saying that parallels has quit unexpectedly I hit the RELAUNCH button but it just comes back to the same screen so I'm unable to use My Windows Vista? WHAT CAN I DO?
HELP!!!!!!!!!

Please post issues with Parallels on the Parallels forums as Apple discussions only provide support for Apple products. Good luck
http://forums.parallels.com

Similar Messages

Lightroom6 instalation rejects installation on Windows 7 with remark that windows vista is not supported

I tried to install Lightroom 6 on my Windows 7 System
The installer jejects the Installation with the remark that Windows Vista is not supported by this product
Is that Problem known? Is any solution available?

Hi Michael,
You can follow the article: How to troubleshoot issues that may prevent a program from being installed correctly on a Windows Vista-based computer and check whether the installer is running in Compatible Mode or not.
If the check box for Compatibility Mode is checked and simply UnCheck it and click Apply.
Run the installer and again and check if it still gives you any error message.
Let us know if it works or not.
Thanks,
Ratandeep Arora

Windows vista do not start

Windows vista do not start.
I have tried starting in the different safe mode, none works (after the loading bar it all just becomes black), also tried start repair it just says that start repair can not fix the error. I have check if I could restore it to a previus state when it work, but it seems like it hasnt save any for some reason. . I have done diagnostic test on the hardware and everything seems to be fine. Probably some virus.
Can I still reinstall the windows without overwriting every personal file? I can not see any option of just reinstall the window only, not the the hardrive. Can I do this in bios maybe? To me you should be able to reinstall just windows and nothing else. It is ok, if the the virus is still there after I have reinstall just windows, what I want to do is save some files, so if I can only come in the computer for 5 min, that is all I need.
I have read that you maybe can save files with downloading linux and load the computer with that to get access to the files. But I do not have a seperat computer with dvd or usb stick. All things can be fix, but it will both cost money and is a little bit of a hassel, for something then maybe not even work in the end.

Your options a limited here.
Should you wish to save your files you will have to put the hard drive in an external hard drive caddy and plug it into the USB port of another computer to transfer your files.
Once done, put the hard drive back into your computer and perform a factory restore which will return your computer to it's original state as when you got it. You will have to reinstall your programs and data files.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

How to get Zen Touch to work on Windows Vista without PFS (worked!)

CHow to get Zen Touch to work on Windows Vista without PFS (worked!)? ***THIS WORKED***
For all of you that want to get their music out of the Zen touch, and are stuck with Vista and .0.03 firmware (non vista recognisable), and don't want to erase everything by installing the latest firmware, here is what worked for me:
)Uninstall every piece of Touch software you got and reboot.
2) Download the latest drivers from Creative: JB3MV2...exe, together with the latest Nomad explorer, and the latest Notmad explorer from Red Chair (a trial is enough, version 9.0.3 currently).
3) Right click the driver, properties, go to compatibility mode, and select Windows XP SP2. Make sure your Zen is unplugged (worked for me that way). Right click the driver installer again and Run as Administrator. It hanged around 72% for me, no biggy, open your task manager and shut the installer off.
4)Before rebooting, install Notmad explorer.(I installed only the Zen touch part of it. I tried to run it right away but got a 'cannot find explorer.exe error - again, no biggy).
5) Reboot, plug in your Zen. Again for me, Notmad didn't work. This is what worked: Without messing up anything, install Nomad Explorer by Creative on top of it all, and reboot again.
6) After reboot, with your Zen still plugged in, right click the little Notmad icon on the right part of the taskbar and select 'Connect Jukebox Zen'. And voila, check your explorer, it should hopefully recognise the Zen Touch like windows xp would.
If you still run into trouble, just install stuff from the beggining, making sure Compatibility: WinXP SP2 and Run as Admin are used everywhere, and keep rebooting till it hopefully works.
Best of luck. edit: Using Winamp to transfer files worked as well.

Hi D2xS-Shooter,
I am afraid Creative Cloud desktop app is not compatible with Windows Vista. If you run into problems there are very limited resources from Adobe to assist.
Creative Cloud is a collection of apps with various different tech specs
http://www.adobe.com/uk/products/creativecloud/tech-specs.html
Thanks!
Eshant

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

Got the following message when trying to install Photoshop CC "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." I use Windows Vista so not sure what I need to

Hi there
I got the following message when trying to install Photoshop CC, "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms."
I use Windows Vista so not sure what I need to do now! Any help would be much appreciated thanks.

Photoshop CC only runs on Windows 7 or Windows 8/8.1. Not Vista.
System requirements | Photoshop

Windows Vista does not see my Ipad but it always did prior to this attempt

Windows Vista does not see my Ipad, this is a new problem and I have not made any major changes to either my computer or to my Ipad. I am running Vista 64 as an operating system. I get the message that windows has an unrecognized USB device. I checked to see if the Apple Mobility software is running and it was, I reset it, turned off the computer, soft reset the Ipad but still no luck.

Hi,
Can you try a different USB port?
Check out this link just in case.
http://support.apple.com/kb/HT4049
Carolyn :-)

Self.close() or window.close() both not working in iOS8.0.2 safari

Both these function(self.close() and window.close()) are not working in safari.
These methods are used to close the tab currently opened.
So, if there is any workaround for this.

if you have programming questions then you should likely post them in the developer forums rather than the normal forums
Developer Forums

New Release QuickVPN client 1.4.0.5 for windows 7 does not work????

New release of QuickVPN client version 1.4.0.5 for windows 7 is not working properly.
We can not connect; instead we receive this message:
"Remote Gateway is not responding, do you want to wait?"
Dear Cisco,,,,
Your release is not complete; please correct issue and advise after it has been tested.
Rgds, EM

Hi, first disable this POLSTORE.DLL again in your QuickVPN-Folder. Then start in this folder IPSEC.MSC and than IPSEC.EXE. You should get from IPSEC.EXE the error above. If not, than any other problem you have. Follow all the hints here in this thread.
If you get the same error above, than enable this POLSTORE.DLL again and start the IPSEC.EXE. You get the full info what has been gone. And within the IPSEC-Window for Local Computer you may find this FREESWAN-setting.
B.t.w. before I went this way I did export and import the IPSEC-settings from the XP-machine, as it was hinted some posts earlyer. But the way I have gone, works also with manualy deleting the FREESWAN config. With the IPSEC.EXE it will new generated in any case.
When you start via QuickVPN you may monitor also what happens within this IPSEC for Local Computer. Press F5 to keep it aktual.
From time to time the connection gets only succeeded after the second and more times. I have a very slow UMTS Internet-Access.
Juergen
Adding: These effects, getting not connected, first and during the VPN-Tunnel exists, has not changed since the top-first Version of Quick-VPN.
Dear customer, be patient, don't care about these stupid messages, click again or when the connection allready has succeeded through the VPN-tunnel do what you did like to do.
...... and again, with which configuration-scenario do the guys at Cisco test and develop .....
Fortunately, I never was a Cisco partner, only a poor user ;)

Satellite A300-1EH - windows installer does not works accurately

Hello, this is my first post on this forum!
My windows installer does not works accurately.
What to do?
Soryy but i dont now much about computer systems.
Have I to reinstall this installer?
I'm waiting for your replys.

>My windows installer does not works accurately.
What do you mean exactly? Do you see some error? What happen exactly?
Maybe your CD is scratched or damaged.

Windows 7 Updates not working since Infinity insta...

Hi All,
I've had Infinity for a week and Windows updates have not worked since. My permissions are the same and i have Admistrator access.
The error code is 80070005
I have done a system restore which has removed Explorer 9 and am still having the same problem
Can anyone help me?
Thanks
Amanda

Same as the others my Win7 updates ok.
Hi,
The error code 80070005 usually means that you do not have enough permission to install updates.
First please confirm you have logged on an account with administrative privileges.
I suggest you to reset Windows update components and run Fix it.
Visit this link for information on how to reset windows update components:
http://support.microsoft.com/kb/971058
iechyd da
sky twitter account a customer ask why sky go streams are worst then sd and yet bt and eurosports apps stream in hd. Reply from mod, oh thats easy the files for hd are some huge that sky go can't play them and no app can stream hd due to this and so when they say they are they're really sd streams, if there was any way around this we would have done it now.

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
Here is the Apple support article that may help you.
http://support.apple.com/kb/TS1717
or my usual solution for Windows Users.
Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck!

Is it me or?, Window Buttons Do Not Work When Clicked

Is it me or?, Window Buttons Do Not Work When Clicked
What is going on in Snow Leopard.
It seems Window buttons (X, -, +) Do Not Always Work when clicked.
Sometimes window does opens, closes, minimizes and often times it does not.
You have have re click like crazy
Message was edited by: macguitarman

What app are you using?
Here's something strange I've noticed in Mail a couple times.
For some reason Mail opens several viewer windows all stacked on top of each other.
So while click the close button does close the window, there's an identical on behind it.
So it almost seems like clicking the close button has done nothing but it really has.
Could this be what your seeing?
Matt

Per window private browsing not working, still sharing cookies

Firefox 21, per window private browsing not working. The cookies are still shared among private browsing windows and tabs. Even with private tab addon, still not working.
If I log into google in one tab, I am still logged in with that account in new private tabs and private windows.

One more question about cookies in private browsing mode.
I don't like browse a web using usual mode 'cause I don't like tonns of sites in a history. But when I start with private mode every time I get empty set of cookies and this was not quite good for me 'cause some sites store its options needed for me. In a prev. versions of FF I solved this issue in such a way: I stored some cookies in a file and every time I started private browsing I loaded them from file. But now this method gives nothing: in cookies manager all set of "non private" cookies is shown both before importing and after importing them from a file and I need to reconfigure my sites every time I start private browsing.
I'm sorry for my English.

Recently installed Firefox 14.0.1 on Windows Vista, and now windows webmail is not working. any suggestions?

since installing Mozilla Firefox 14.0.1 on 7-15-12, and I believe Adobe Flash Player may have been installed at same time as well, I am unable to send e-mails using my Windows Vista system. Any suggestions would be much appreciated.

Are you using Hotmail / Windows Live Mail, or a different Windows webmail site?
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
1. Clear Firefox's Cache
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
2. If needed, delete the site's cookies here
While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?
When I look at your "More system details" list I don't see the Shockwave Flash plugin at all. You can check whether you have Flash installed and running on Adobe's "about" page here: http://www.adobe.com/software/flash/about/

My Windows Vista is Not Working

Similar Messages

Maybe you are looking for