N79 - IMAP retrieves headers only ???

Hello everyone,
i'm having a strange problem .When i try to retrieve full email message content through my IMAP server in the organization where i work, i do not get anything but the same listing of emails from IMAP. Even in the Settings menu of the phone's mail client, only "Headers only" option is chechked. There is no option to retrieve it fully, or to access email content as if it was standard webmail access.
POP3 settings work ok, i got full emails through a separate email inbox, but IMAP is "Headers only", and nothing else.
Thank you for helping,
V.   

Something like this:import javax.mail.search.*;
SearchTerm new = new FlagTerm(new Flags(Flags.Flag.SEEN), false);
Message[] msgs = folder.search(new);I haven't tried this particular search term myself but I've used others and they do cut down the time to extract messages from a folder.

Similar Messages

  • Download headers only?

    Usng Mail 2.1.1. with OS X 10.4.10 ... I'm on the road using dial-up and am wondering if there's any way I can configure Mail to download Headers only, so I can then choose which messages to fully download, and which to delete (without downloading them).
    I know I can do this with a web-based browser ... but can I do it in Mail?

    I agree it's a useful facility, but Mail doesn't offer it as such. You could look at this (quoted from the Help):
    If you're traveling, or are in a hurry, you might want to leave large messages on your Post Office Protocol (POP) mail server so you can retrieve them later when you have more time or a faster connection.
    Choose Mail > Preferences and click Accounts.
    Select a POP account.
    Click Advanced, then enter the maximum size of messages you want to retrieve automatically next to “Prompt me to skip messages over.” (For example, 100 KB.)
    When you receive a message that is larger than the size you specified, Mail gives you the option of downloading the message, skipping it and leaving it on the server, or deleting it from the server. If you don't make a choice within 15 seconds, Mail automatically downloads the message. If you skip a message, then the next time you open Mail you're asked again to download, skip, or delete the message.
    Not sure whether you get the header when this happens, you would have to experiment.

  • How can I use table headers only without using rows.

    how can I use table headers only, without using rows and without leaving the space.
    If anyone could say me how to paste the pic in this questions, I would have shown it.
    The flow of view is in this way
    {Table header(table on top of table)
    column header1___|| column header2__ || column header3__ ||}
    <b>Here is the blank space I am getting, How to avoid this space?this space is of one table row height</b>
    {Contents column1 || Contents column2 || Contents column3 || (This is of other table below the uper table)}
    I am using scroll for the content part of table only.
    So I am using two tables.
    I am using NW04.

    I did the possibles you explained, but couldn't get rid off the space.
    Any other solutions?
    I am keeping the header static and the content columns scrollable.
    I have used two tables one to display header above and the other to display only the contents.
    I have put the contents table in scroll container.
    And the header table in transperent container.
    Thanks and Regards,
    Hanif Kukkalli

  • "headers only"

    i'm re-posting my problem.
    In Message size limit option, I only have "headers only" (no other options such as 2MB, 5MB... Maximum.)
    as a result, i can't see the body of email after clicking the email.
    i have to click "download full message" again to see all.
    i hoped kitkat update fix my problem, but it did not.
    can anyone help with this?
    thanks

        I'm sorry you're still dealing with this issue phil2s! Have you tried removing & setting up your email again? Is this across all emails on the phone, or on just one email?
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • LG G2 Corporate Email - Stuck with Headers Only?

    OK...so I've had the LG G2 for about a month now.  It's a fantastic phone, however, one thing that really annoys me is the Exchange Corporate Email.  For some reason, for every email I open up, I have to click on the 'Load Full Message'.  I've gone into the account settings to the Message size limit, however, the ONLY THING LISTED is "Headers Only".  I have nothing else to choose from.  I've searched the forums and found other folks with this issue (under the 12b issues discussion).  I've tried all the suggestions posted:  (1) remove the account and re-add.  (2) Remove the account, restart phone, and re-add.  (3) And just today I did a factory reset and then re-added the account.  Nothing seems to fix this.  I know this isn't something from the Corporate Security side of things because my previous phones (Droid X and Droid RAZR) did not have this issue.  Nor does anyone else have this problem with their various types of phones via 'water cooler' talk.
    So what the heck is going on?!?  Any ideas on how to fix this?  Is this a VZW issue?  Or a LG issue?
    Phone info:
    Verizon LG G2
    Model VS980 4G
    Andorid 4.4.2
    Kernel: 3.4.0-perf-gdf89a11   lge@andorid-build
    Build #:  KOT49I.VS98024A
    Software version:  VS98024A 

    tommyj496 wrote:
    I get notifications on my phone, no problem.  I'm talking about getting notifications when someone replies to this VZW Forum page.  Thus why it's taking me days to reply to a post.   Forgive me for being a little vague on that one.
    You have to edit the preferences under your community profile. Click on your username at the top of the community page to access your profile.

  • Imap email only able to choose retrieve headers, p...

    k, so i'm setting up gmail to be automatically synced with ma phone, and having a few teething troubles... i want to automatically download the content of the email instead of having to access it each time i open an email. however it apears imap (the settings the phone auto defines) will not automatically download this. anyone know why not/have a solution?
    cheers
    ME

    I'm sitting in front of windows at the moment so give me some leash....
    But its easy. I believe, just beklow the subject line, is a pull down menu for the source account.
    Ingeneral it defaults to the last account used, or the account used for a thread if you are replying.
    Grant

  • Can I retrieve message headers only?

    Hi,
    I have two Mac's, one iMac that I use most of the time and a Macbook that I use occasionally. Both Mail apps are setup the same but to avoid lengthy downloads I'd like to set Mail on the Macbook to only download the headers, then I can decide if I want to download the entire email or not.
    Any advise would be great,
    Dave

    Anyone?

  • Imap: how to get new mail headers only?

    Hi all,
    I understand that we can use getMessages to get the light weigh messages, then we can use getHeader to get each message's header, but how do I get the new messages' header only? Is there such a way?
    If I do:
    getMessages
    while (loop through all the Messages) {
        getFlag
        if (flag is unread), go get header.
    }I am afraid that looping through the Messages and get each message's flag is expensive. Is there a better way to do this?
    Thanks,
    Grace

    Something like this:import javax.mail.search.*;
    SearchTerm new = new FlagTerm(new Flags(Flags.Flag.SEEN), false);
    Message[] msgs = folder.search(new);I haven't tried this particular search term myself but I've used others and they do cut down the time to extract messages from a folder.

  • SQL function to retrieve records only if all the values are available.

    Hi,
    I have a sales table on which i run a parameterized query.
    We pass a few week IDs to retrieve store sales.
    I need to retrieve only those stores that has sales in all the week IDs passed.
    If i use the in operator, i am getting the store data even if there is sales for only one week.
    Is there a function in oracle to do this?
    Thanks,
    Sharan.

    Hi, Sharan,
    Here's how you could use the analytic COUNT function:
    WITH     got_week_cnt     AS
         select  week_id, store_id, prod_desc, sales_units_raw, sales_value_raw
         ,     COUNT (DISTINCT week_id) OVER (PARTITION BY  store_id)            AS week_cnt
         from     sales_store_dwh
         where      week_id in (&&Week_ID_CSV)
    select  week_id, store_id, prod_desc, sales_units_raw, sales_value_raw
    FROM     got_week_cnt
    WHERE     week_cnt  = 1 + LENGTH ('&&Week_ID_CSV')
                    - LENGTH (REPLACE ('&&Week_ID_CSV', ','))
    ;Notice that the sub-query got_week_cnt is just your original query, with the COUNT function added.
    You didn't post your tables or results, so I can't test it.
    You didn't say what version you're using, so I made a conservative guess (Oracle 9 or higher). In Oracle 11, there's a simpler way to find the number of weeks passed.

  • How to retrieve snapshot ( only image) of videos?

    How can i retrieve on client side, snapshots of each video stored in a particular application on flash media server. So that I can use that snapshot as image thumnail while listing the available videos.

    Are you talking about security settings in a PDF (use ctrl-D to get to the security tab) or some OS read-only option? What are you looking at when you say you deleted a read-only option.

  • ODI Commit of Headers only when Lines data is loaded successfully

    We have a requirement where in we have two interfaces ( headers & lines).
    We have to commit data in Headars table only if the lines table gets successfully polulated.We have customized the KM's to remove commit from the headers interface and removed the ddl statements from IKM and LKM which usually do autocommit.We tried commiting the data after the lines interface execution , but that's not working. Though in ODI it displays single session for all executions(header and line), internally it is creating sub sessions.
    We are using IKM Oracle Incremental Update-Merge knowledge module.
    Execution steps are Procedure 1 --> Procedure 2 --> Headers Interface --> Lines Interface --> Procedure 3 --> Procedure 4.
    Kindly provide your inputs.Looking forward to your suggestions.

    Anand,
    My approach would be different. Essentially your requirement indicates that you need to run DML on header and details table within same transaction cycle. Because for each interface execution, agent makes a separate connection, it is hard to design that into two different interfaces. My approach would be to accommodate both targets into single interface using a special LKM. Below is the procedure in short:
    1. Create a data model by adding columns on header table and details table together.
    2. Design an interface and put this model as target.
    3. Bring the usual sources in the source pain and establish joins
    4. Create the mapping for header table and mark them as UD1 in addition to mark them as INSERT or UPDATE as required.
    5. Create the mapping for header table and mark them as UD2 (not UD1) in addition to mark them as INSERT or UPDATE as required.
    6. All mapping are to be executed in staging.
    7. Create a special IKM to include two I$ tables (I$_target_table_1 and I$_target_table_2) using the columns used for UD1 and UD2 mapping respectively. Populate them. To know how to use UD1 and UD2 mappings, look at manual for the documentation of odiRef.getColumnList api.
    8. Add two options in the IKM where header and detail table names can be specified.
    9. In a trasaction cycle (say, transaction1), insert into header table. In the next step into details table. Commit in the next step. In that way, if insert to details was not successful, job will fail and ODI would terminate the connection without a commit.
    If you want to use two interface still, you have to find a way to run both interfaces asynchronously and then the IKM used in the interface for header table should be modified in such a way that after insert it must wait for some kind of communication (in the form of table data or temporary file) to mark the commit. My best guess would be to use jython in the IKM to check for the file. Off course interface writing to detail tables must be sending similar communications at the end of a successful write. If you do not want to use Jython, my advise would be to use PL/SQL procedure (try looking into DBMS_PIPE or DBMS_ALERT, I do not have ready code) to arrange for such a notification. But this is one hell of an extra work and the logic has multiple points of failure that requires still extra work.

  • Sending a retrieving headers

    I am trying to send and retrieve header info. Sending isnt a problem I open a scopet and just write out the header I need to send. However when I try to read in from the socket all I get is HTML code, I need to get the response header.
    Thanks
    G

    I open up a connection to a server using Socket()
    I create a string with the header info I want to send.
    I use the write() method to send the string containing the header information to the server I just opened the connection to.
    The server sends back a header response <-- this is where it goes wrong.
    I tries using BuffereredReader....yada yada with socket.getInputStream()
    but all that gets is the HTML not the header response , I need to get the headers that are returned
    Thanks
    G

  • Building hash based on IMAP message headers to maintain uniqueness

    This is more of a general java question than Javamail but since it has relevance to IMAP, i thought of posting it here. Basically, I discovered it hard way that the IMAP server that I am working with (MS Exchange) isn't returning unique UID for the same message (for the same UIDVALIDITY on the folder). Under certain condition it simply purges the old message, creates a new message with a new UID (for example when read status on a message is changed, rather than changing the flag status, it purges the existing one and creates a new one with a new UID). I don't want to fight with Microsoft over this as all my previous attempts at pointing their errors have gone in vein.
    Given this, I want to build a hash out of all the message headers and probably the internal date. This i know will guarantee uniquness in majority of the cases. The question is how do I do that. Is doing an MD5 on all the headers the best way to go about it? Will i run into a hash collision type situation with this?

    Thanks bill. What's apparently happening in our exchange envrionment is that we have let's say a client A that deposits the message in Exchange store over MAPI. That client can create new message or change flags on existing, change priority and do all kinds of the stuff. When that client does whatever it does over MAPI, exchange somehow decides to flush the old message and create a new message even though the change was merely an update. I've confirmed with client A that they aren't doing anything unusual, its just that Exchange decides to do it their way. They actually are not violating the IMAP protocol either coz all they are doing is flushing the old message and creating a new one. My outlook client connected over IMAP handles this just fine in that as an end-user you don't see a delete followed by an add and hence i am assuming they must use something along the lines that I am planning on doing.
    Totally agree that not using UID is going to be expensive but they haven't left me with any choice.

  • Outlook 2010 - connect headers only

    I'm using outlook 2010 and it says 'connected to microsoft exchange headers'. I think this is giving me a strange thing that searching for emails is only returning emails that I've read.
    Kevin

    udenit, I'll bet if you were to go into the 'Download Preferences' and uncheck 'On Slow Connections Download Only Headers' then it will return to Connected to Microsoft Exchange.
    (I realize that udenit has probably already resolved this issue, but I wanted to make sure others we able to find the answer, cause it took me some trial and error before I finally figured it out)

  • Setting email to receive headers only

    With the very high cost of receiving data when travelling, is there any way that you can set the iphone to only receive headers for emails? I thought I had done so by setting the preview line to zero, but, of course, the phone still downloads the entire message in the background (or so my usage monitor implies)

    Look here.
    http://support.apple.com/kb/TS4268

Maybe you are looking for