N80 WEB:All ready in use

My phone had been surfing fine through my wireless router but now i suddenly get the error "Web:All ready in use".
I have made sure all applications are closed. I have powered off and back on thinking that would shut all apps. I removed the battery as well and restarted and still get the same error.
Any one got any ideas how to cure?
Cheers

11-Nov-2006
09:01 AM
ralminov wrote:
Just go to Menu->Connectivity->Conn. Mgr.-> Act data conn.
Close the active connection.
Regards
Very good suggestion. Wish I had thought of it

Similar Messages

My TV has only 2 HDMI conections that are all ready in use for Directv and the Blueray. Can I use composed cables to conect Apple TV

My TV has only 2 HDMI conections that are all ready in use for Directv and the Blueray. Can I use composed cables to conect Apple TV

I'm going to take a guess and say that if your TV has 2 HDMI ports, it also has a component input (5 wire). I'm also going to guess that either your DirecTv or your Blueray has a component output option. If I had this setup, I would put my DTV on the component option and use the open HDMI port for the ATV2.
I doubt you will be able to tell the difference on your DTV. Most of the stores that demo HD use component wiring on their store models. The only downside is that you may be giving up the highest sound (Dobly 5.1 or whatever they call it.)
Or you could just go to switching the HDMI cords from your BluRay to the ATV2 depending on which one you are watching. I think I use my BluRay about 5% or less of my viewing time. If I "tossed", I wouldn't shed a tear.

What would the pricing be for adobe web hosting for me; I all ready have CS3 creative suite, an existing plan for the new Photoshop and Lightroom 5. But I need also to use Muse?

What would the pricing be for adobe web hosting for me; I all ready have CS3 creative suite, an existing plan for the new Photoshop and Lightroom 5. But I need also to use Muse?

Hello Fpless,
For more information regarding your request, I would advise you to please get in touch with our Sales Team by phone.
Phone number: 802 06016 (dial from Denmark)
Thank you.
Arnaud.

Hi Thanks for 4.0. It runs much faster on my Mac, however, it no longer works to zoom in all of my web pages. I use to be able to use my finger pad to increase the size of all of all pages. Thanks again.

Hi Thanks for 4.0. It runs much faster on my Mac, however, it no longer works to zoom in all of my web pages. I use to be able to use my finger pad to increase the size of all of all pages.
Thanks again.
PS Are you working on a version for the iPad and iPhone with Add Blocker? That would be great!

Here are some zoom add-ons which might provide a workaround:
[https://addons.mozilla.org/en-US/firefox/search/?q=image+zoom&cat=all&x=0&y=0 Image Zoom]
As regards your question about iPad and iPhone, you'd be better off posting that question here: [https://forums.mozilla.org/addons/ Mozilla Add-ons Forum]
P.S. ''Apologies for not responding earlier''.

Launch All Web Applications in browser using PowerShell

Hi Admins,
I am working on a Script where I should be able to launch all the web applications in the browser to open in tabs.
I have worked out with the following script and was able to come upto an extent where I am able to launch the Internet Explorer.But ....only 1 web app opens up and throws an error message :
Exception calling "Navigate" with "1" argument(s): "The interface is unknown. (Exception from HRESULT: 0x800706B5)"
Below is my script
Add-PSSnapin Microsoft.sharepoint.powershell -ErrorAction SilentlyContinue
$webApps = Get-SpWebapplication
foreach($webapp in $WebApps){
$URL = $webapp.URL
$ie = New-Object -ComObject InternetExplorer.Application
$ie.Navigate($URL)
while ($ie.busy -eq $true) {
Start-Sleep -Milliseconds 600
$ie.Visible = $true
Can anyone help me know where I am making the mistake ?
Regards

Hi,
As I understand, you want to lunch all web applications in browser using PowerShell.
I can achieve it by the PowerShell code below:
foreach($webapp in $WebApps){
$ie = New-Object -ComObject InternetExplorer.Application
$URL = $webapp.URL
$ie.Navigate($URL)
$ie.Visible = $true
You can try it and check it if can work.
For the error message, I recommend to run the SharePoint Management Shell as administrator or turn off User Access Control and then check how it works.
Best regards
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
The above code will open 3 different browser. OP requested to launch all web application in different tabs. To achieve this we need to use the code below
$webApps = Get-SpWebapplication
$ie = New-Object -ComObject InternetExplorer.Application
$ie.Navigate($webApps[0].URL)
for($i=1; $i -le $WebApps.length-1; $i++)
$ie.Navigate2($WebApps[$i].URL,0x10000)
$ie.Visible = $true
Regards Chen V [MCTS SharePoint 2010]

Web pages will not load through Safari on all my computers using my AT

I am using Safari 8.0.5 and OS 10.10.13. The last couple days when using Safari through all my computers using my AT&T internet connection, web pages either will not load or they load very slowly. Safari will indicate it cannot find the site. If I run Safari, using all the same computers, through my Verizon MiFi Connection, it works fine. U-Verse works fine. Mail works fine through AT&T. I am able to use Internet Explorer through my AT&T connection on a work lap top without difficulty. I have deleted caches in Safari and deleted history in Safari. I have contacted AT&T and they do not know what is the problem. When I check my download and upload speeds for the internet using Safari and the AT&T connection, they are slow. When I do the same using the Verizon connection, they are fine. Does anyone have any ideas? Thank you.

You're not alone. I, too, was having the same problem today. I found your question and had seen that you had contacted AT&T with little success. I had gone to ufix.att.com and ran the self diagnosed test and system reset. My pages are loading a little faster now. Hope this helps.

How to display all the surveys using content query web part

Can you please tell me how to display all the surveys using content query web part in more details? I also created a subsite and multiple surveys in that site. Then, I inserted a Content Query Web Part and select the List Type to be "Survey",
however, it returned nothing. Did I miss anything?

Hi,
OOTB Survey List does not contain any
Content Types and it has the following structure:
Response entry is represented by
List Item
Response entry consist of questions and answers, where Question correspond to
Field and Answer to Item value respectively.
For querying Survey List via CQWP the following properties could be used
BaseType
<Lists BaseType="4">
ServerTemplate
<Lists ServerTemplate="102">
Example
To retrieve all the responses from Survey lists, specify List Type property as shown on picture
Reference:
http://stackoverflow.com/questions/17280778/display-all-surveys-using-content-query-web-part
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

HT1665 There is a bug in the spellchecking functionality when typing in the web view or while using Blogsy App. Why? Why my IPad crashes so often?

There is a bug in the spellchecking functionality when typing in the web view or while using Blogsy App. Why? Why my IPad crashes so often?

I have always found spell check to be "buggy" in every version of all of the iOS's that I have run on my original model iPad and my new iPad - especially when replying and typing posts in these forums. It works perfectly in every other application on my iPad but it has never worked perfectly in any web browser that I have used on my iPad - no matter what I have done to try to correct it. That is what MY experience has been with spell check on my iPads.
As for the crashes on your iPad try these basic troubleshooting steps.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit all apps and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Invoking a web service not created using oracle web service lib

Hi All,
I have a need to invoke my web service from oracle sql command. My web service not created using oracle web service library, but it is created using axis c++ libraries. Is it possible to do so,
Thanks in advance,
Regards,
Monica

In order to call out from the database process, is SQL (or PL/SQL) you need to generate some client code, that understand the details about the specific of the service you want to invoke and can produce the correct SOAP request. Once this proxy is uploaded in the Database, you can use it.
There is a set of Database Web services samples that should help you get started. You can also take a look at the developer's guide - see Developing a Web Service Client in the Database.
Hope it answers your question.
--eric

"This drive is not ready for use; it's door may be open ..."

Hi.
I recently updated to itunes 7, and then had an issue with a corrupt file on the i-pod (which resulted in chkdsk hanging itself at 27%, always). So I restored the i-pod and that took care of that - chkdsk now says it's fine.
However - it is also empty. My machine and i-tunes recognize it fine upon start-up; however, a short while into a full synch to get my library back on the i-pod, I invariably get the following error message:
"The drive is not ready for use; it's door may be open. Please check drive \Device\Harddisk\DR 3 and make sure that a disk is inserted and that the drive door is closed." The message comes with the options "cancel, ignore and continue", yet the latter two don't make a difference, and even if I choose cancel, itunes keeps trying until it eventually crashes.
This always happens after itunes has synchronized about 1.13 GB (out of 18.55 available).
As far as I can tell, both my system and the iPod are up to date (itunes and windows update say so, anyway). E: is unequivocally and exclusively allocated to the i-pod; changing the settings from "optimize for quick removal" to "optimize for performance" has made no discernible difference.
Any ideas would be very much appreciated.
Thanks.
DELL Inspiron 4150 Windows XP

Hullo ...
let me follow up on this again. I've followed your advice, de-installed spybot, no change. I looked through the windows support help base, nothing. While trying out different things, I started getting a "delayed write failed" message, and I did some things they suggested (including adjusting the registry - me, adjusting the registry!)and it went away, and now all I get is the "open door" message again.
That is: everything works absolutely fine, I plug in the i-pod (latest version i-tunes and i-pod is up to date), it's recognized instantly by the explorer as well as i-tunes. I've run all scans you can possibly run on it, and it is fine (no corrupt files, nothing). I've restored it twice through i-tunes, twice through the explorer. I've changed the drive letter.
It starts the synch fine (it's still almost empty after the last restore), but at some point, I get the error message. Interestingly enough, *up to* that point, it'll synch fine - I can disconnect it and play on it whatever's been synched thus far. I can also modify my i-tunes settings and preferences, all of which i-tunes will recognize and adhere to. It is just unwilling to put more than 1GB of stuff onto my 20GB i-pod.
Something I've noticed is that it is sometimes indicating apparently faulty charges in the beginning (though that is quickly corrected once the synch starts), as in, it'll recognize a certain amount of audio files, but also claim a random amount of "other" files, which should not be there (apart from the 30MB or so of genuine i-pod software).
Anyhow. I haven't seen any solutions to this on the forums or in the apple help files, but people appear to be having this problem still. Any ideas or input would be very much appreciated ...
Thanks.

"The drive is not ready for use; its door may be open. Please check drive \

3G IPOD problems which are driving me mad and i can see others have had the same problem but i can't find any solution written down.
Basically my IPOD either freezes after a couple of songs or it downloads about 6Gb (of 40) and the freezes with the following message:
"The drive is not ready for use; its door may be open. Please check drive \Device\Harddisk2\DR6 and make sure that a disk is inserted and that the drive door is closed"
I've tried re-setting, installing etc but no luck. Any suggestions/solutions?
Laptop - Packard Bell Notebook Windows XP

Hmmmm. I'm not sure how to explain this.
You need to change the Drive Letter for your iPod.
You should be able to connect your iPod then open Windows Explorer and right click on your iPod(which seems to be Drive E:) and change it to a different letter (like H).
If you haven't enabled disk use for your iPod it probably won't appear in Windows Explorer.
To enable disk use: connect iPod, open iTunes. Open Preferences and select the iPod tab. Choose "enable disk use."
Once you've done all that, try resyncing.

How to develop web services in OSB using Eclipse OEPE

Hello,
We have some live web services developed in SOA ESB using JDeveloper.
We are now forced to migrate to OSB because of the reason that sometime next year ESB will be de-supported by Oracle.
I am looking for some good documentation which explains how to create web services in OSB using Eclipse. Please help.
I am installed Web logic + OEPE + OSB in my local machine already. All I need is to know how to start development.
Thanks,

Hi,
You can start with this:
http://docs.oracle.com/cd/E17904_01/doc.1111/e15866/tasks.htm
Cheers,
Vlad

Error converting web page to PDF using Acrobat 8 IE 9 on Vista

I am getting the following errow when I try converting web page to PDF using Acrobat 8 on IE 9 on Vista. This worked previously but it appears that a recent update to Acrobat caused issues with this functionality. This happened once before and after some troubleshooting the technician wasable to get the functionality working again. The Adobe printer shows up with "Error" however I can still create PDFs from outlook.
Error Has Occurred
Line:11
Char:3
Error: Permission Denied
Code: 0
URL:res//C:\Program Files\Adobe\Acrobat 8.0\Acrobat\AcroIEFavClient.dll/AcroIECapture.html

Is the plugig the same as an add-on because all of my Acrobat Add-ons are active?
Name                Adobe PDF
Publisher           Adobe Systems, Incorporated
Status              Enabled
Load time           0.25 s
Name                Adobe PDF Reader Link Helper
Publisher           Adobe Systems, Incorporated
Status              Enabled
Load time           0.01 s
Navigation time     0.00 s
Name                Adobe PDF Conversion Toolbar Helper
Publisher           Adobe Systems, Incorporated
Status              Enabled
Load time           0.06 s
Navigation time     0.00 s
Name                Adobe PDF
Publisher           Adobe Systems, Incorporated
Status              Enabled
Load time           0.00 s

Drive not ready for use, door may be open

iTunes transfers about 800mb of content before error message appears:
The drive is not ready for use; its door may be open. Please check drive\...
I have restored, formatted, tried different PC's always get same result. Visited genius bar and they declared that my iPod was healthy but refused to move enough content to the iPod to reproduce the problem. iPod is a little under 2 yrs old.
My confidence and respect regarding Apple and it's products is now greatly in question. I spent $400 duchats on this thing and I am starting to feel like an unappreciated client.
Thanks for any help...

Hullo ...
let me follow up on this again. I've followed your advice, de-installed spybot, no change. I looked through the windows support help base, nothing. While trying out different things, I started getting a "delayed write failed" message, and I did some things they suggested (including adjusting the registry - me, adjusting the registry!)and it went away, and now all I get is the "open door" message again.
That is: everything works absolutely fine, I plug in the i-pod (latest version i-tunes and i-pod is up to date), it's recognized instantly by the explorer as well as i-tunes. I've run all scans you can possibly run on it, and it is fine (no corrupt files, nothing). I've restored it twice through i-tunes, twice through the explorer. I've changed the drive letter.
It starts the synch fine (it's still almost empty after the last restore), but at some point, I get the error message. Interestingly enough, *up to* that point, it'll synch fine - I can disconnect it and play on it whatever's been synched thus far. I can also modify my i-tunes settings and preferences, all of which i-tunes will recognize and adhere to. It is just unwilling to put more than 1GB of stuff onto my 20GB i-pod.
Something I've noticed is that it is sometimes indicating apparently faulty charges in the beginning (though that is quickly corrected once the synch starts), as in, it'll recognize a certain amount of audio files, but also claim a random amount of "other" files, which should not be there (apart from the 30MB or so of genuine i-pod software).
Anyhow. I haven't seen any solutions to this on the forums or in the apple help files, but people appear to be having this problem still. Any ideas or input would be very much appreciated ...
Thanks.

Problem Web Dynpro Java applications using JasperReports

Hello all,
We have followed the footsteps of these blogs but we can not make it work.
Part I --> Part-I: Print Web Dynpro Java applications using JasperReports
Part II --> Part-II: Print Web Dynpro Java applications using JasperReports
Part III --> Part-III: Print Web Dynpro Java applications using JasperReports
Details system: 7.02 SP3
We believe that the problem is in the library, because it finds them.
1) We created project as a DC external library with *.jars
2) Public part DC external library.
3) Add public part of DC Library into new project DC WebDynpro Java.
4) Development Component -> Build is OK
5) Development Component -> Deploy is OK
6) Test app ERROR.
When we run the application shows the error:
The initial exception that caused the request to fail, was:
   java.lang.NoClassDefFoundError: net/sf/jasperreports/engine/JRDataSource
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:141)
    at com.unisys.tmb.View01.onActiongenerarPDF(View01.java:161)
    at com.unisys.tmb.wdp.InternalView01.wdInvokeEventHandler(InternalView01.java:140)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    ... 28 more
See full exception chain for details.
Regards,
Luis.

Hello John,
Thanks for the link. We have performed the steps in this blog:
1) Create DC Project "External Library" with name js/jars:
- Add *.jars in folder Libraries.[Screenshot Libraries|http://img846.imageshack.us/img846/8395/jsjars.jpg]
- Add archives (*.jar) to public part with name ExternalLib. Which option to choose?
a- Provides an API for developing/compiling other DCs (Option chosen)
b- Can be packaged into other build results (eg SDAs)
- Development Component -> Build
Step 1 is OK.
2) Create "J2EE Server Component / Library" DC with name js/lib:
- Add Used DC -> public part project ExternalLibrary -> "ExternalLib"
- Specify both build time and run-time dependency here and strong.
- Generated SDA file in <var>gen/default/deploy</var> How do we check that it contains <var>js.jar</var>?
- folder gen/default/plublic/defLib/lib/java then you meet *.jars files again. is OK.
- Development Component -> Deploy.
- Go to Visual Administrator. We found the library js/lib, but has no associated *. jar. It is the problem.[Screenshot Visual Administrator|http://img542.imageshack.us/img542/5537/visualadminlib.jpg]
3) Create "WebDynpro" DC with name pdf_jasper
- Add used DC (defLib) to WebDynpro DC with option "Build time".
- WebDynpro References -> Library references --> add <var>jslib
- Deploy
- Run error: java.lang.NoClassDefFoundError: net/sf/jasperreports/engine/JRDataSource
Regards,
Luis.

N80 WEB:All ready in use

Similar Messages

Maybe you are looking for