N90 video clips failure?

Hi everybody! I'm new here, just registered. I have a problem and here it is: I tried to transfer some of my favourite video clips on the phone, but I encountered a problem, I can't watch them. Has anybody an idea how can I make it work?
On my laptop I use BSplayer to watch....is that a problem when I transfer the videos? Cause the "smart"phone tells me it's unsupported format. And the video is mp4, so I don't understand.
So, please, if anyone can help me out I'll buy a beer. Cold one.
Ciao!
Riding till the end

The videos y have encoded are encoded with MPEG4 AVC/H.264 CODEC.
Most smartphone cannot play MP4 files with these codec.
The Things to be done:
Go to www.erightsoft.com
or, www.imtoo.com
Download SUPER and imtoo 3gp converter respectively.
The first one is freeware.
In bothe softwares MUST USE MPEG4 or H.263 for as video codec.
Thanks.

Similar Messages

Problems with Metadata Set and video clip size... I think....

Ok, I can't figure this one out... any help would be much appreciated.
Background:
I started server using the Video Production default customer profile. Then I created a few new metadata Sets including one called Finished Programs which is a media asset.
Problem:
When I upload a video clip and select the Finished Programs metadata set it always changes to the Media metadata set. Now this only happens when I have used MPEG Streamclip to take the video off of a DVD. If I upload a clip (mov) file that I used in Final Cut Pro it works fine.
My settings in MPEG StreamClip are Apple DV/DVCPRO-NTSC 720x480 Interlaced Scaling and Reinterlaced Chroma.
If I upload two clips at the same time and select Finished Programs metadata set, one that I used MPEG StreamClip and one that I digitized into FCP, it will place two clips in FCPserver, one with the Finished Programs and one with the Media Set.
Any ideas on how to fix this????

Could be. If it's not the metadata it must be something else. You would have to figure it out by trial and error. Maybe you should try giving it the highest priority and maybe turn off all automated scans and see if it works then. just to make sure that nothing intervenes with the process while it is going on and see if you can get it to run fully and see what the outcome is then.
I have files over 1 GB that get attached to the right medadataset. I have failures on thumbnail creation to, but FCSvr then starts the same job over and over till it succeeds.
I have never user MPEG Streamclip clips in FCSvr. Hopefully somebody else has and could share their experiences.

Assembling still photos and video clips into one video presentation.

This is partly a Photoshop Elements and Premiere Elements (both version 7) question, so hopefully not posting to the wrong group (there doesn't seem to be a Premiere Elements forum anyway)!
I am currently putting together a video/slideshow presentation, initially for display directly from a computer (to data projector) and then ultimately to end up on a DVD. The presentation consists of digital and scanned photographs (prints and transparencies) and video clips. I successfully put together a slideshow of all the stills with Photoshop Elements, inlcuding music etc. I then output the slideshow to Premiere Elements, so that I could merge it with my already edited video clips.
The output process works smoothly enough, but as soon as I run the completed presentation, the quality of the imported slideshow is nothing short of woeful! Each image is badly pixellated and all the transition effects are mangled - in short, it is unwatchable. As it turns out, simply adding a single, still image to Premiere Elements results in a very poor final image. Drop the exact same video clips and still images into Windows Movie Maker and the quality is spot on (as is playing the slideshow after outputting it as a WMV file and playing via any player capable of playing WMVs).
Trying to go the other way, ie importing video clips into Photoshop Elements, pretty much always results in it crashing!
The two products are marketed to "work together", but they are an abject failure in this regard!
OS is 64 bit Vista Ultimate.
I've tried searching the manuals and online help, but could find nothing of any help. I've sent an e-mail to Adobe support, but have received no response from them (after three weeks).
I'm hoping that someone may be able to point out something that I may have missed, or offer some tips and tricks.
Thanks.

There is a separate forum for Premiere Elements at
http://forums.adobe.com/community/premiere/premiere_elements
Also, my favorite place for Premiere Elements questions (including slideshows) is a site started by some Adobe Premiere Elements forum regulars at http://muvipix.com/phpBB3/index.php Forum signup is free. There are multiple subforums at that site and because most of your questions are Premiere elements, I suggest that you post under the "PE version 7" subforum.
Wherever you decide to post, I suggest that you include in your post my comments and the answers to the questions that I asked here.
1 -- It has FAQs over to the right of the thread listing on the Adobe Premiere Elements forum. One of those FAQs that is relevant to your current workflow is
What resolution should my photos be in Premiere Elements?
http://forums.adobe.com/thread/431851?tstart=0
2 -- Also, I suspect that you used Pan and/or Zoom on some of your photos when creating the Slide Show withinn Photoshop Elements.
For those photos, you want the Premiere Elements setting of Scale to Framesize set OFF.
3- There are also other considerations such as
-- which Project Setting you are using in Premiere Elements?
-- what dimensions are you using when you export from Premiere Elements to the WMV file?
-- what is the resolution for the projector on which this video will initially be displayed?
4 -- I do agree with your approach of adding the video in Premiere Elements.
5 -- The mangled transitions needs more detailed info in order to discuss.
Tthe timing of transitions is definitely different between the Photoshop Elements slideshow editor playback and the Premiere Elements output: this gives some people serious problems and for others it is not significant. I don't know yet if that is your problem.

How can I create a video clip that has multiple copies of the same subject playing at the same time? Basically like one person became 50 backup dancers!

Hello Everyone,
I am trying to create a single video clip where my original subject (dancer) is multiplied on the screen many times. Basically I am trying to create a background video for a dance team and want to make it look like an army of the same person dancing behind them. Amy guidance would be great!
Thanks
Madisonman 2013

Motion ($50) can do this with a replicator.
Russ

HT4589 How do I move video clip clip up or down after setting letterbox, i used to be able to do this until i upgraded to 10.0.6

I used to be able to manually move my video clip up and down in the event the browser using one of the settings. It was a vertical settings that i would use to pull a video clip down after i applied a letterbox to the clip, so I could see the top of the the video clip that got blocked out by the letterbox. Still looking no luck....I used to be able to do this just upgraded to FCPX 10.0.6 now i dont have the setting..

think i might have solved my own problem the feature is not there i have to upgrade again to 10.0.7...this is getting annoying...

How do I sync multiple audio clips to one video clip?

I have video (with stereo audio from a camera mic), and for each take, there are also four additional mono audio tracks that line up with it. It was footage shot outdoors in the city, so I guess the filmmakers just wanted to have as many options for sound mixing as possible given how much background noise there would be. I have tried selecting the video clip and the four audio clips at once and selecting "synchronize clips," but it doesn't work. It spits out a synchronized clip that seems to have converted two of the mono tracks into one stereo track... and then disregarded the remaining two mono tracks. It's a mess. It's likely someone else will fine tune the audio once I'm done cutting the video together... but I'd like to get all the audio tracks properly synced from the start. Thanks for any help you can offer.

Do you mean manual syncing? I've been reading this thread about workaround, which aren't working for me: http://forums.creativecow.net/thread/344/21236
But the question they are asking is the same one I am asking. Isn't this a typical situation, having multiple mics for one camera? For example, if someone filmed a concert with one camera but used both the camera audio, and ambient mic, and a mix from the board, then that would be 3 audio tracks with 1 video track. I'm in a similar situation, and I'm finding it hard to believe that FCPX isn't equipped to edit this way. There must be some way to get one video clip (with reference audio) to sync with four audio tracks.

Is there a way to speed up video clips in imovie on ipad

is there a way to speed up video clips in imovie on ipad? I'm currently editing some videos and would like to speed up a few clips to make the video shorter. Is this possible on ipad or just mac pcs only?

actually, no 'add-ons' possible or avail for iMovie/MacOS/iOS…

CS5 Video Clip no longer auto plays

Hi,
I have a video player that I'm creating in Flash -- my video clips are on different scenes and I wanted a "menu" bar to allow the viewer to pick which scene they wanted. I found tutorials for various scrolling thumbnail menu bars and I eventually found a code which allowed me to click from scene to scene.
However, now that the menu bar works, the video clips do not automatically play anymore and I'm not sure why.
This is the link to my file: http://www.mediafire.com/?y7oofbwg444lnp8
I only have one action script on the scene, which is the top layer that has [AS]stop();[/AS]
I have two buttons on either side of the video clip:
[AS]on (press) {
          nextScene(); play();
}[/AS]
[AS]
on (press) {
          gotoAndPlay("SI", 1);
[/AS]
This is the coding for the scrolling menu bar:
Frame 1:
[AS]// Photoscroller 2.0
// Original Author: Barry Driessen
// E-mail: barry@e-factory.
// Upgraded by: Rob Gungor
// Email: [email protected]
// I don't care if u use this thingy, you don't have to
// give me credit for it. Just knock yourself out with it!!
// If you like it or have suggestions, just drop me an e-mail!
// **stupid people tip**
// to use this scroller as is --
//copy all the frames in the timeline (by right/(control //for mac) click, copy frames)
//then right click on your timeline and paste frames
//sorry if that is insulting, but when I first started this stuff, I was dumb too :-)
// Okay... First let's set some variables......
// Xphoto = startposition of the scoll image
xphoto = 258;
// Widthmovie = This variable hase to be set to the
// same amount of the moviewidth
widthmovie = 325;
// Scrollspeed = The scollspeed of the image (high numbers result in slow scrolls 10=average)
scrollspeed = 25;
// widthphoto = the width of your scrollable image in pixels
widthphoto = 2116;[/AS]
Frame 2:
[AS]// Setting the xmouse to 0 in the centre of the movie:
xmouse = _xmouse - (widthmovie / 2);
// Setting the speed:
speed = (xmouse) / scrollspeed;
// If the speed is negative, the speed will be made positive here:
if (speed < 0) {
          speed = -(speed);
//new function courtesy of Rob
//basically says that if the mouse isn't betwen these two y points it won't work
//**stupid people tip**
//make sure that you figure out the top and bottom y points of your "photo" and insert them accordingly!
mouseposition = getProperty("/myself", _y);
if (_ymouse < 330) {
          speed=0;
if (_ymouse > 390) {
          speed=0;
// If the mouse moves to left, the photo will scroll to the right:
// (That makes sense.... Doesn't it!! ;-)
if (xmouse < 258) {
          xphoto = xphoto + speed;
// If the mouse moves to the right, the photo will scroll to the left:
if (xmouse > 258) {
          xphoto = xphoto - speed;
// Checking for the left end of the image:
if (xphoto > 258) {
          xphoto = 258;
// Checking for the right end of the image:
if (xphoto < -(widthphoto - widthmovie)) {
          xphoto = -(widthphoto - widthmovie);
// Placing the moviclip (photo) on it's new postition:
setProperty("photo", _x, xphoto);
[/AS]
[AS]gotoAndPlay (2)
// make sure this clip this in your movie when you copy it.
//**last stupid people tip**
// if you copy these frames into any other frames other than 1, make sure you change the frame that it repeats (ie. if you copy these 3 action frames into 5,6,7 "gotoAndPlay (6)")--
///ok duh-i know. :-)
// The mouseovers are quite simple. Just open the Movieclip "MouseOver"
// to see how it works...
//                                       Have fun!!!!!
//**i realized that it's more fun when drinking beer.
//-rg
[/AS]
Then inside the thumbnail, to make it serve as a button:
[AS]on (rollOver) {
          button2.gotoAndPlay(2);
on (rollOut) {
          button2.gotoAndPlay(16);
on (release) {
          // You can assign an actionscript to each Button in here:
          _level0.gotoAndPlay("my_target1");
}[/AS]
Thanks!

you need to remove:
gotoAndPlay (2)
so your video can play. you've embedded your flv into your timeline so it only plays when the timeline plays and that goto is preventing the timeline from playing.
of course, if you remove that the thumbnail code won't work.
bottomline: your project code is a mess and using an flv in a timeline is not what you should be doing.
you should have no code attached to objects, no frame loops and no flvs embedded in a timeline. you should attach your code to a timeline, user an enterframe loop and use an flvplayback component to play your flv(s).

Importing xbox 360 video clips into imovie 6.0.3sk

Hi, I have an xbox 360 that I would like to import some video clips off of onto my computer using imovie. I have a Powermac G4 with a dual 1.4 ghz cpu, 2 GB of RAM, and lots of HD disk space. I am using an ADS Pyro A/V link for capturing video. I have used this many times in imovie to capture video directly from a TV, VCR, DVD player, etc. For some reason when I hook up the cable from the xbox 360 to the Pyro (using either component connection or composite/RCA connection) and hit play in imovie to preview what's being converted, it can't process it. Sometimes it will show a bunch of pixelated squares, sometimes it won't show anything. Every once in a while it can process the sound, otherwise it doesn't show anything. After a few times, it says the pyro has been disconnected, although it obviously hasn't been. I've also tried directly importing without previewing it during the import, but that doesn't work either. I'm not sure if I need to set something a certain way? But I know you can import from the 360 because there are obviously many video clips floating around the internet taken straight from the xbox.
Anybody know anything about this or have any ideas? Any help would be much appreciated. Thanks in advance

Nevermind...I figured it out. There is a little button on the video cable that toggles HDTV on or off. Apparently it has to be off. So if anyone else has this problem, hopefully they can learn from my mistake.

Sony DCR-DVD505 Handycam: Unable to get video clips, audio

Evaluating Adobe Premier. Hopefully helpful for other Sony DCR-DVD505 users.
Objectives:
1) Get videos from Sony DCR-DVD505 handycam into Premier Elements
2) Drag and drop various clips into Sceneline
3) Insert menu markers
4) Burn DVD
Stuck in Step 1, getting video from handycam, unable to get video clips (with audio)
First Try: NO AUDIO.
The Sony DCR-DVD505 burns a mini-DVD (1.4 GB) while recording. After "finalizing" the disk, the media may be imported into the computer. Streaming was supported by Windows XP driver but is no longer supported in Windows Vista. In fact, Vista Service Pack 2 (SP2) does not even recognize the camera as a DVD drive! So downgraded to Vista SP1 and used the Sony Picture Motion Browser to import media into computer as MPG files. Each MPG file is a clip (corresponding exactly to camera record on-off sequence while shooting). Then opened up Adobe Premier Elements 8. Used get media to import all the MPG clips into "Organize". Dragged and dropped various clips...inserted a menu or two and...burned the DVD. PROBLEM: VIDEO OK, BUT NO AUDIO(?!). The MPG files on computer play fine (with audio) inside Windows Media Players. Read all sorts of nonsense about why Adobe Premier (probably old versions) cannot work with "low-quality/compressed" MPG and needs to be a particular type AVI soo....
Second Try: Capture VOB directly
Forget the camera. Insert the mini-DVD directly into computer DVD drive, create a new project and followed directions from "Lowdown on VOB" http://forums.adobe.com/message/2117743 and "tools to convert to DVI" http://forums.adobe.com/thread/415317. I loaded the VOB directly and dropped them into Timeline as advised by the second post (only hitch being the first VOB pertaining to the DVD menu is not recognized and is neither needed).
However, File > Export is always GREYED out (unusable). And the status at bottom right seems to be looping on "Background Rendering". DO I WAIT? In any case, the whole video is showing up as a single continuous stream and what I want are the clips from the camera?!
Then I tried Prism (again as per the second forum post mentioned above). It simply did something to process 30 minutes of video and crashed in the end without explanation - saying there was an error in conversion.
Is this AVI conversion even a good idea? How would I get my clips back??
Bottomline. My mini-DVD and imported MPGs plays fine in Windows Media Player. However unable to extract the camera clips (with audio).

Dawg, I have the Sony DCR-DVD305, and have been using it successfully for quite a while with PE7, with few issues, once I had a workflow nailed down.
I believe the 505 is basically the same camera, with some additional features.
This workflow worked for me in the past so I'll pass that along:
Sony Browser to PC as Mpeg.
Mpeg to Windows Movie Maker, output to DV-AVI, taking default settings.
DV-AVI imported into PE7.
This should also work for PE8.
Upon getting Cyberlinks PowerDirector v7, my new workflow changed to this:
I take the min-DVD directly from camcorder to my PC, and capture the disk via Power Director.
PD will convert the VOB's directly to DV-AVI Type 2 on one pass.
I then load this DV-AVI into PE7.
(PD v7 was pre-installed on my new PC from HP, or it can be purchased from Cyberlink).
Other options to try:
Copy the VOB's directly from the mini-DVD to your PC and use Prism to convert these to AVI.
Or load the VOB or Mpeg into PE, then use that to convert to AVI.
(Export to DV-AVI with PE8 is done with SHARE/PC, not Export under the File Menu, which is greyed out).
I've had many issues trying to work with Mpeg's and VOB's when loaded directly to PE with limited success.
So if you can get it converted successfully to AVI outside of PE, I've found this to be a better approach.
Post results, if any of this works for you...
Note: One other thing, if you are working directly with VOB's to PE, especially multiple VOB's from a single DVD, you can encounter out-of-sync issues between video and audio. If this occurs, review this link from Muvipix:
http://muvipix.com/phpBB3/viewtopic.php?f=38&t=2469:

How do i email a video clip from my iphone

How do i email a 6 minute video clip from my iphone

Open Photos > select video > tap forward icon (rectangle with arrow) > Email Video. If the video file is too large for your, or the recipient's email server, it may not get delivered.
You need this - it's all in there:
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
Message was edited by: modular747

JAN 4, 2012 As of the Upgrade to   Lion,. and the Email portion, ..   DOES NOT allow a Video Clip to be sent via the Email as the I-Photo is not supported by Video Clips ( Previous Leopard No problem clip and drag via Quick Time Pro to the email

JAN 4, 2012
As of the Upgrade to   Lion,.   2007 I-Mac -   the Email portion, ..   DOES NOT    allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip ..      Now Lion only Export's   1 size, .   only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail    ???
Between the   Issue of   the   Lion, and Email issues ,   and the   Upgrade of   I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge ..    70,000 + photos in the Computer. .   and was   40,000 in the   I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB   or 32 GB   Unit . .
          No Help . ..   so far, .. as a Apple user   since   1996 ..    I have Never experieanced such frustration    ???
               ( any one have some help if similar experiances    ?     thank you     )

JAN 4, 2012
As of the Upgrade to   Lion,.   2007 I-Mac -   the Email portion, ..   DOES NOT    allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip ..      Now Lion only Export's   1 size, .   only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail    ???
Between the   Issue of   the   Lion, and Email issues ,   and the   Upgrade of   I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge ..    70,000 + photos in the Computer. .   and was   40,000 in the   I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB   or 32 GB   Unit . .
          No Help . ..   so far, .. as a Apple user   since   1996 ..    I have Never experieanced such frustration    ???
               ( any one have some help if similar experiances    ?     thank you     )

On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

I managed to boot the computer and get the desktop to show. I now have a "repaired" computer. There are several problems that have cropped up. One is that I can only start up now in Safe Boot mode. Is there a way to turn it off? Also, I do not have a sound list, so I can't access anything requiring audio. Google Chrome only shows up as a white screen. Pictures that loaded before don't load in browsers, etc. Any suggestions? I figure I should reinstall Mac OS Lion for starts, maybe even do a mirror backup and reformat the drive. I think this drive has turned into scrambled eggs...what a headache!

IPhoto video clips does not work in iMovie

I just installed Leopard and ilife '08 into my MAC.
The video clips from my iPhoto library are not shown properly in iMovie. I'm only able to hear the sound of the clip but unable to watch it. when i skim through the clip, i don't see anything on the viewer, i just hear skimming through the sound. when i tried to play the clip, just the sound began to play. even the thumbnail does not show a picture of the clip, its just grey.
Can someone help me please???

Format: Apple OpenDML JPEG, 640 x 480, Millions 16-bit Integer (Little Endian), Mono, 44.100 kHz
As post in your other topic, this looks like it should be compatible.
I've captured video from my built-in isight camera in my MacBook. when i was trying to skim through or play the video clip in iMovie, the clip didn't appear in the side viewer. I am able to hear the voice of the clip and even see the thumbnail clearly but not in the viewer.
This sounds like part of your original problem. Suggest you try importing the same files to an alternative platform and/or possibly an alternative user account to see if the problem is "global" on your system and "limited" to your system only. Suspect you may have a bad install or corrupted application that may simply be generating unusable "thumbnails" here. You basically need to isolate the problem to see if it is in OS and/or application. For instance, did you update to iMovie v7.1 before or after installing Leopard or better yet, have you installed all of the updates?

Importing video clips in AVCHD (Lite) into Aperture vs iMovie

I'm trying to figure out which application I should use for importing and storing video clips shot on my Panasonic DMC-ZS7 camera. This camera can shoot in AVCHD (Lite) or in Motion JPEG. I use the AVCHD (Lite) format to shoot the videos with this camera.
The two application options I currently have for importing video clips from this camera are:
a. Aperture 3.5.1 (I'm not using iPhoto since I have Aperture).
b. iMovie 10.0.1 (I'm not using Final Cut Pro)
When I first got this camera, Aperture 3 did not support the AVCHD Lite codec. Back then, iMovie could import video clips shot in AVCHD Lite, but it had to transcode the AVCHD video clips into AIC (Apple Intermediate Codec). Some time later, one of the Aperture 3 updates made it possible to import AVCHD Lite into Aperture (without having to transode into an intermediate codec), so we started importing our video clips shot in AVCHD Lite (together with our photos shot by the same camera) directly into Aperture.
iMovie 10 released in 2013 supports importing video clips shot in AVCHD Lite without having to transode them to AIC for storing these video clips in iMovie. So, now we have a dilemma that we need help with. Which application should we use going forward for importing video clips from this camera?
When I look at the metadata for the imported videos in Aperture, I see that the format of the imported video clips is listed as H.264. However, I can't seem to be able to find any information about the format in which iMovie stores imported videos. I can "Reveal in Finder" a video that I import into iMovie, and I see the size of the file and the .mov extension assigned to the file. With video files, the extension does not always determine the codec of the file, but in my non-expert opinion, the .mov extension is not H.264; I may be totally wrong here, though. What I have noticed, though, is that a video clip imported into iMovie has the file size that is about 10% larger than the same video clip imported into Aperture.
Therefore, I have three questions:
1. What format is a video clip (shot in AVCHD Lite) stored in Aperture 3.5.1 and in iMovie 10.0.1
2. Which format (the one used by Aperture or the one used in iMovie) is better suited for transoding AVCHD videos into? The balance of the quality and file size is the main consideration for us.
3. Which applications would you personally prefer using for importing video clips to and why?
I do want to use some of these video clips to make home videos in the future, utillizing iMovie. However, it seems I can still store the raw footage in Aperture and access this raw footage from iMovie to be able to create an iMovie project and a final home video. One of the concerns is that if we keep importing our video clips into Aperture, the Aperture library could grow beyond the size that Aperture can support and we may end up losing our photos due to the database corruption. Is this a real risk?
Thank you!

I had the same question recently. Go to the right of this box and a little above, into the Search Discussions window. Type in this: Is MPEG2 the answer
You will find my question, and the great answers I got. Follow those directions and you will be all set!

N90 video clips failure?

Similar Messages

Maybe you are looking for