NAT 8.0 to 9.2 convert help
I have the below config on ASA 8.0 I need to convert it to 9.2
name 10.2.17.80 BV-DVR
name 10.2.13.80 SE-DVR
name 10.2.23.80 ES-DVR
name 10.2.10.80 NW-DVR
name 10.2.10.81 NW-DVR2
name 10.2.1.76 C-DVR1
name 10.2.1.78 C-DVR2
name 10.2.1.80 C-DVR3
name 10.2.19.80 WS-DVR1
name 10.2.19.81 WS-DVR2
name 10.2.15.80 SW-DVR
name 10.2.11.80 M-DVR
object-group network Camera_DVRs
network-object host SE-DVR
network-object host BV-DVR
network-object host ES-DVR
network-object host C-DVR1
network-object host C-DVR2
network-object host C-DVR3
network-object host WS-DVR1
network-object host WS-DVR2
network-object host NW-DVR
network-object host NW-DVR2
network-object host SW-DVR
network-object host M-DVR
object-group service DM_INLINE_TCP_2 tcp
port-object eq 8000
port-object eq www
port-object eq 8001
port-object eq 8100
port-object eq 8101
port-object eq 8200
port-object eq 8201
port-object eq 8202
port-object eq 8203
port-object eq 8300
port-object eq 8301
port-object eq 8400
port-object eq 8401
port-object eq 8402
port-object eq 8403
port-object eq 8404
port-object eq 8405
port-object eq 8500
port-object eq 8501
port-object eq 8502
port-object eq 8503
port-object eq 8600
port-object eq 8700
object-group service DM_INLINE_TCP_3 tcp
port-object eq 8000
port-object eq www
port-object eq 8300
port-object eq 8301
port-object eq 8400
port-object eq 8401
port-object eq 8402
port-object eq 8403
port-object eq 8404
port-object eq 8405
port-object eq 8500
port-object eq 8501
port-object eq 8502
port-object eq 8503
port-object eq 8600
port-object eq 8700
access-list 200 extended permit tcp any host 1.1.1.172 object-group DM_INLINE_TCP_2
access-list 200 extended permit tcp object-group Camera_DVRs host 1.1.1.172 object-group DM_INLINE_TCP_3
static (inside,outside) tcp 1.1.1.172 8000 BV-DVR 8000 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8001 BV-DVR 8001 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8100 SE-DVR 8100 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8101 SE-DVR 8101 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8200 NW-DVR 8200 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8201 NW-DVR 8201 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8202 NW-DVR2 8202 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8203 NW-DVR2 8203 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8300 ES-DVR 8300 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8301 ES-DVR 8301 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8400 C-DVR1 8400 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8401 C-DVR1 8401 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8402 C-DVR2 8402 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8403 C-DVR2 8403 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8404 C-DVR3 8404 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8405 C-DVR3 8405 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8500 WS-DVR1 8500 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8501 WS-DVR1 8501 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8502 WS-DVR2 8502 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8503 WS-DVR2 8503 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8600 M-DVR 8600 netmask 255.255.255.255
static (inside,outside) tcp 1.1.1.172 8700 SW-DVR 8700 netmask 255.255.255.255
Here is a bit of what I think I need to do....
object network OBJ-10.2.17.80
host 10.2.17.80
object network OBJ-1.1.1.172
host 1.1.1.172
object service OBJ-TCP-8000
service TCP source eq 8000
object service OBJ-TCP-8000
service TCP source eq 8000
nat (inside,outside) source static OBJ-10.2.17.80 OBJ-1.1.1.172 service OBJ-TCP-8000 OBJ-TCP-8000
access-list outside_access_in extended permit tcp any4 object OBJ-10.2.17.80 eq 8000
Thanks,
Mike
I did not create the above config, If I did I would never have "DM_INLINE" on anything. It is a default naming for Cisco when objects are created via ASDM and lazy or inexperienced engineers do not correct that. Also auditors do not like such in-descriptive names. I do not like this default behavior at all and do most everything via CLI, much better and much more control. It would be better when using ASDM and creating these it does not put a default name in but forces you to enter something.
Mike
Similar Messages
-
Photoshop CS6 will not open raw files even after I downloaded a DNG converter help please!
Photoshop CS6 will not open raw files even after I downloaded a DNG converter help please!
We are pleased to announce the Adobe Camera Raw 8.7 RC is now live on Labs! See the links below.
Technology pages:
CC - http://labs.adobe.com/technologies/cameraraw8-7-cc/
CS6 - http://labs.adobe.com/technologies/cameraraw8-7/
Download pages:
CC - http://labs.adobe.com/downloads/cameraraw8-7-cc.html
CS6 - http://labs.adobe.com/downloads/cameraraw8-7.html -
hey i have a iphone 4s 64gb but and using the internet share .. how can i change the nat type from strict to open please help me
You will have to configure that with your router. Type your router's IP address in the search/domain bar and allow port forwarding.
What is requiring you to have an open NAT? That issue is usually for gaming consoles, etc. -
Converter help for all those people that need it
i just bought xilisoft ipod video converter after i tried the free version from the other post and i want to put on the keygen because i want to share it and plus its mine so i can do what ever i want with it so here it is
(name) TEAM ViRiLiTY
(serial) MXILKYAMEYIRRMISMTE-0FE2-7E8A-98A7-405B
there it is folks xilisoft is only for Window users one for mac would be http://www.nullriver.com/index/products/moviepod so there it is folks this is only a one time thingHi,
Go through the below link, here i gave a answer on inner joins issue, you will understand.
Re: Improve performance of a SQL request
<b>Reward points if it helps,</b>
Satish -
HTML Responsive Layout for tablet and phone is not showing icons correct on a converted help file
I am using the Responsive HTML Layout in RoboHelp 11. On all of my new help files, the layout works great and my icons are showing appropriately. On all of my old help files that were converted, my icons do not fit within bar for the tablet and phone. I am using the Government Theme (Theme2_Government), but modified the file to have our colors and logos. I exported the .slz file and I am using the same slz file in all of the help files. The only help files that are cutting off the icons are the help files that were converted from previous version of RoboHelp. Any idea why this would happen?
This is from the converted file showing the icons that are cut off in the blue bar.
This one is from a new help file and the icons fit within the blue bar.
The same thing happens the phone layout with the bar at the bottom. -
Videora converter help--- cant watch vids on itunes...
I converted a video with te videora ipod converter,.. but dont know why... i cant watch it on the itunes... someone plz help me..
check what you have your settings on, i downloaded videora this morning and converted all my music clips. i used these settings MPEG4,320x240,768kbps stereo, 128kbps and converted music videos in about 4 minutes. they all seem to play fine in itunes
-
Hey I am making a java program to convert from certian currency types to another. It reads from a file w the rates .. and all currency types are 2 words long.. such as Japanese Yen, American Dollar, and so on. Now heres the code.
import java.io.*;
import java.util.*;
import java.text.*;
public class CurrencyConverter{
public static void main(String[] args) throws FileNotFoundException{
try{
// Importing file with rates
Scanner console = new Scanner(new File("rates.txt"));
String s = "y";
while(s.equalsIgnoreCase("y") || s.equalsIgnoreCase("yes")){
// Declaring variables
String[] currency = new String[6];
double[] rate = new double[6];
int i = 0;
// List currency types able to be converted
System.out.println("Currency types available for conversions:");
while(console.hasNextLine()){
String line = console.nextLine();
Scanner data = new Scanner(line);
currency[i] = data.next() + " " + data.next();
System.out.println(currency);
rate[i] = data.nextDouble();
i++;
// Input currency type we are converting from and to
System.out.println("Please enter the currency you wish to convert from:");
Scanner input = new Scanner(System.in);
String cfrom = input.nextLine();
System.out.println("Please enter the currency you wish to convert to:");
String cto = input.nextLine();
// Input amount of currency
System.out.println("And how much of " + cfrom + "s are we converting to " + cto + "s?");
double amount = input.nextDouble();
// Calculate
int j = 0;
while(! cfrom.equalsIgnoreCase(currency[j])){
j++;
int k = 0;
while(! cto.equalsIgnoreCase(currency[k])){
k++;
double adollars = amount / rate[j];
double total = adollars * rate[k];
// format for numbers
DecimalFormat df = new DecimalFormat("#.##");
System.out.println((df.format(amount)) + " " + cfrom + "s equal " + (df.format(total)) + " " + cto + "s.");
System.out.println();
System.out.println("Would you like to make another converstion?");
Scanner input2 = new Scanner(System.in);
s = input2.nextLine();
System.out.println();
console.close();
}catch (Exception e){
System.out.println("Invalid Entry. Please make sure you are entering the correct currency and");
System.out.println("and a numeric value for the amount.");
The program just feels really wrong to me. What I really have problems with is using the Try/Catch .. I would really like to be able to have them re enter a currency type or amount instead of it going to the catch and ending the program if one is wrong. Also I am not 100% sure about my formating to double decimals on the output.
Well thos are my 2 biggest concerns atm. Any advice even if its about something I didnt mention would be helpful. Just wanna polish this up a little and make it feel correct. Thanks.What I really have problems with is using the Try/Catch Yep.
You "expect" that to happen.
Thus it is not exceptional.
Put the try catch around the parsing code only. On exit from there you will either have a valid value
or you ask the user to try again.
Also I am not 100% sure about my formating to double decimals on the output. Try it.
Additionally note that generally (maybe always) you would not normally use a floating point type
for money. Instead either use an integer type or the class BigDecimal.
Floating point types can lose bits which in business represents real money. -
Nokia Internet Tabled Video Converter Help!
Hi guys,
I recently bought a 5800. I used Nokia's Internet Tabled Video Converter to convert my videos.
However, there's no sound after converting my avi, xvid and divx files
please helpI think you should try OVI Suite to convert instead of the internet tablet software since the internet tablets (N770, N810, etc) are different than the 5800.
...who's more foolish?, the fool or the one who follows him?... ovi-wan -
DM-VPN with Static NAT for Spoke Router. Require Expert Help
Dear All,
This is my first time to write something .
i have configure DM-VPN, and it's working fine, now i want to configure static nat.
some people will think why need static nat if it's working fine.
let me tell you why i need. what is my plan.
i have HUB with 3 spoke. some time i go out side of my office and not able to access my spoke computer by Terminal Services. because its by dynamic ip address. so what i think i'll give one Static NAT on my HUB Router that if any one or Me Hit the Real/Public IP address of my HUB WAN Interface from any other Remote location so redirect this quiry to my Terminal Service computer which located in spoke network.
will for that i try but fail.
will again the suggestion will come. why not to use .. Easy VPN. well sound great. but then i have to keep my notebook with me.
i'll also do it but now i need that how to do Static NAT. like for normal Router i am doing which is not part of VPN.
ip nat inside source static tcp 192.168.1.10 3389 interface Dialer1 3389
but this time this command is not working, because the ip address which i mention it's related HUB Network not Spoke
spose spoke Network: 192.168.2.0/24
and i want on HUB Router:
ip nat inside source static tcp 192.168.2.10 3389 interface Dialer1 3389
i am using Cisco -- 887 and 877 ADSL Router.
but it's not working, Need experts help. please write your comment's which are very important for me. waiting for your commant's
fore more details please see the diagram.
for Contact Me: [email protected]hi rvarelac thank you for reply :
i allready done that , i put a deny statements in nat access-list excluding the vpn traffic , but the problem still there !
crypto isakmp policy 10
encr aes
authentication pre-share
crypto isakmp key 12344321 address 1.1.1.1
crypto ipsec transform-set Remote-Site esp-aes esp-sha-hmac
mode tunnel
crypto map s2s 100 ipsec-isakmp
set peer 1.1.1.1
set transform-set Remote-Site
match address vpnacl
interface GigabitEthernet0/0
crypto map s2s
Extended IP access list lantointernet
30 deny icmp 172.17.0.0 0.0.1.255 192.168.1.0 0.0.0.255
40 deny igmp 172.17.0.0 0.0.1.255 192.168.1.0 0.0.0.255
50 deny ip 172.17.0.0 0.0.1.255 192.168.1.0 0.0.0.255
80 permit ip any any -
So, I'm having the problem where I open the videora iPod converter choose transcode new video and in 1 and a half seconds it says finished, but when i go in to the export directory there is nothing there. I have looked over each step of about 4 different tutorials about 4 times and each and same with all FAQ's. I have seen my enable debug console (some explain why you can't copy that so i cant paste it here). It mentions that i should searc/find/delete all but the newest cygwin.dll. I seach, find, and then realize that the only cygwin.dll i have is the one that is in the "videoraipodconverter" folder . So I leave it there and then in my debug info it say that it should be located in a x:\cygwin\bin folder. So I created a folder C:\cygwin\bin and copied it in there, but still no dice. So I've searched more into the FAQ's and tutorials, but still no dice. I'm a pretty computer savvy person so you don't need to hold my hand through this, but I would appreciate some info, beecause I got no where else to turn and it seems a lot of people have this problem and most people are just posting the link to the same faq's to them that don't help. So any takers? Anyone know what is goin on and what to be a lamb and try and help me out? Thanks, I appreciate it
THIS IS NOT THE SUPPORT FORUM FOR THIS 3RD PARTY SOFTWARE AND EVEN IF ITS RELATED TO ITUNES OR THE IPOD YOU NEED TO GO TO THEIR WEBSITE FOR HELP...EVEN THOUGH ITS CHEAP TRASHY SOFTWARE ! LINKS BELOW.
To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
To get started: http://www.videora.com/en-us/Converter/iPod/
If you have questions: http://www.videora.com/en-us/Converter/guides.html
If you have more questions, post them here: http://www.pspvideo9.com/forums/index.php?c=8
Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there.
GFF -
I have an older model G5, My display which was one of the old models with the clear plastic frame around it broke, so I just replaced it with 2 LG screens that I am going to link together. I got a DVI/VGA adapter for both of the screens and only one fit into the back of the computer. The other input seems longer than the normal DVI input. Would anyone know which converter I need to buy and where I can purchase it? Thank you.
Thank you. I know this may sound insane but let me know if u think this will work. I already have a VGA to a DVI adapter. If I get a ADC to DVI adapter, can I think link all 3 of them together?
ADC to DVI adapters use DVD-D. They only transfer the digital video signals. A DVI to VGA adapter needs the analog video signals from DVI-A or DVI-I. It will not work with (or even plug into) DVI-D.
(Some ADC to DVI adapters may use a DVI-I connector, but the analog video pins are not connected, so will not work with a DVI to VGA adapter.)
Do your LG didplayd hsave DVI ports? -
Converter help for S-bracket 1/8" SPDIF to RCA!
I have a Cambridge Audio 5.1 Digital speaker system (DTT2500 Digital) that I want to connect to my s-bracket on my KT3 Ultra 2. The problem is that the s-bracket only has a TOSLINK optical and 1/8" SPDIF. My Cambridge Audio amp has a Dolby Digital (AC-3) RCA connector and a proprietary Creative digital DIN type connector. Any help would be appreciated.
Hi min2, try this forum and this review. Hope you can find some information there. Good luck!
-
FILE CONTENT CONVERTION HELP...?
Hi folks,
can anyone help mre giving file content conversion parameters for the below example.
case 1 : ID, NAME, AGE
201, ABCDE,25
for the above case we use row.fieldNames, row.fieldSeperator, row.endSeperator.
but if the case is like below.
case 2 : ID,"NAME1,NAME2",AGE
202,"ABC,DEF",26
what content parameters should be use for the above case. Here field seperator is expected between the quote's.
thanks in advance.
Srinivas reddyHi,
If you want to use NAME1 & NAME2 as single field then use xml.enclosureSign=" and xml.enclosureSignEsc=" " in your FCC.
u can also refer http://help.sap.com/saphelp_nw04/helpdata/EN/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
& How to solve extra commas in CSV files in FCC..!!
Reg,
NJ
Edited by: nishu jain on Apr 7, 2010 10:49 AM
Edited by: nishu jain on Apr 7, 2010 10:49 AM -
Hi
i am facing a usage error in the arguments of the converter command
when i issue the following:
C:\new\jck\bin>converter -out JCA -classdir c:\new\jck\samples\src\com\sun\javacard\samples\wallet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x6:0x1 1.3
the following error arises:
error: invalid AID 1.3.
and list how to use this command
please see whate is the error in that
thank for your helpexcuse me
i try the following for the helloworld but an error arises in the path
although the path is right :
C:\>converter -exportpath ".\export files;.;.\jc22\api_export_files" new\jck\sam
ples\src\com\sun\javacard\samples\HelloWorld 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1 1.0
Java Card 2.2 Class File Converter (version 1.3)
Copyright 2002 Sun Microsystems, Inc. All rights reserved. Use is subject to lic
ense terms.
error: class HelloWorld does not belong to package new\jck\samples\src\com\sun\javacard\samples\HelloWorld.
conversion completed with 1 errors and 0 warnings.
please reply for the two above messages. -
Using adobe DNG convert help me please!!!!!
I have Adobe CS5 and have just bought a panasonic FZ200. Rawimages cant be opened from this camera in CS5 so I have downloaded the DNG converter. All is well on my laptop but on the PC which is where I would really like to edit my images I keep getting an error message 'the source folder doesnot contain any supported camera raw files'. They are the same files! I have copied them on to both machines so why does the converter not see them? My laptop runs windows 7 and the PC runs Vista - is this significant? I am really fed up with this , have been trying to get these images edited all day!!!!
I think the problem you are having is that, when browsing using the DNG converter, you are opening the folder that contains your raw images. Notice that the prompt asks for the FOLDER that contains your raw images. Choose that folder, but don't open it. Then the DNG converter should convert the images that are in that folder. If you only want to convert one or two images, drag/drop them onto the icon that you use to start the DNG converter.
Maybe you are looking for
-
ERR REP-1219: 'R_1' has no size -- length or width is zero.
Hi All, Please tell me the solution for my problem.. I am getting the error ERR REP-1219: 'R_1' has no size -- length or width is zero. .... in report builder i am getting the result.. But in application11i it is giving error..(ERR REP-1219: 'R_1' ha
-
Customising data link up/down rule
Is it possible to somehow filter out specific link up/down messages displayed on MARS? For instance if the syslog message is for a user port, say G1/0/1 I'm not interested in seeing that message, but if its from T1/0/1 then I want to raise the priori
-
How do you find out the answers to your security questions if you forgot them
How can I find out what the answers to my security questions are?
-
HT203426 how to delete an update from update panel?
I keep getting an error trying to upgrade an app. How do I delete it from the update list? Thanks in advance for any information
-
Hello In a WM managed Storage loc, I did 309 from A to B which have different st bins X & Y resp.But the system did transfer to mat B in st bin X But I want to transfer it to Y Do I have to do st bin transfer also? How? Thanks & regards Dinesh