Native Client installation

Hi , I 'm new to tarantella.
I installed SGD on a windows 2000 server and it works fine.
But when I installed the native client on an pc on my network it gives
following error message :
Cannot conntect to the server;
HTTP/1.1 302 Object Moved
Please contact an admin
However from that pc I can connect to the management console via internet
explorer and I use the same url in the client !
Any Help!
Gerry

was this error when you installed the NC or when you tried connecting
via the NC to your server?This error occurs when I 'm trying connecting via the NC to the server.
what version of SGD EE are you using and what is the URL, you can fake
the severname bit.Version : 4.0.0 build 1108
The url that works in internet explorer :
http://testserver/Console/NMLogin.asp?pgid=NMLogin
Gerry
"Carmelo" <[email protected]> wrote in message
news:db6c31$mr6$[email protected]..
Gerry wrote:
Hi , I 'm new to tarantella.
I installed SGD on a windows 2000 server and it works fine.
But when I installed the native client on an pc on my network it gives
following error message :
Cannot conntect to the server;
HTTP/1.1 302 Object Moved
Please contact an adminwas this error when you installed the NC or when you tried connecting via
the NC to your server?
However from that pc I can connect to the management console via internet
explorer and I use the same url in the client !what version of SGD EE are you using and what is the URL, you can fake the
severname bit.
Any Help! Gerry

Similar Messages

  • SQL Server 2008 R2 Native Client Silent Installation Failure

    Hi all, I'm trying to silently install SQL Server 2008 R2 Native Client using command prompt but I'm running into trouble with the IACCEPTSQLNCLILICENSETERMS=YES parameter.
    From command prompt, I'm trying to execute the following:
    msiexec /i "C:\PathToMSI\sqlncli.msi" /qb IACCEPTSQLNCLILICENSETERMS=YES
    Running this command though results in an installation error:
    'The required IACCEPTSQLNCLILICENSETERMS=YES command-line parameter is missing. By specifying this parameter, you acknowledge that you accept the end user license terms for the Microsoft
    SQL Server 2008 R2 Native Client.'
    Is this an error with the installation package or am I doing something wrong here?
    Thanks

    Hi GB2014,
    Based on my analysis, your issue could be due to that the required 'IACCEPTSQLNCLILICENSETERMS=YES' parameter is not passed successfully. I recommend you to follow one of the two methods below to troubleshoot the issue using the tool
    ORCA.
    1. Edit sqlncli.msi file using ORCA, add the property IACCEPTSQLNCLILICENSETERMS with a value of YES, then save the MSI file and install SQL Server 2008 R2 Native Client again.
    2. Open sqlncli.msi file in ORCA, scroll down the left row to table "InstallExecuteSequence", find the action (SNAC_IAcceptSQLNCLILicenseTerms), change whatever was in the condition column(a bunch of options, delete them all) to YES. Then saved
    the MSI file and install SQL Server 2008 R2 Native Client again.
    In addition, There is a similar thread for reference:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/a8957ad1-8ef4-4789-9086-8ce6de7fd18f/managed-installation-of-sql-server-2008-r2-native-client?forum=sqlsetupandupgrade
    Regards,
    Michelle Li

  • Error in Client Installation - B1 8.8 in Vista

    Hi,
         I am installing B1 8.8 PL 00 in a vista system, but system throwing an error saying that Installation failed to complete.
         Other XP Clients are sucessfully got installed.
        Server:
                     Win 2008 Standard Edition
                     SQL Server 2008
                     SAP B1 8.8 PL 00
        Client:
                     Windows Vista Business Edition
                     CPU : x86 (32 Bit System)
                     Netowrk Full Access
         Can anyone please suggets me the best way to fix this error.

    Hi,
          I have installed the follwing prerequests
                 1, Dot Net 3.5 and Service pack for Same
                 2. VC + 2005
                 3. Windows Installer 4.5
                 4. SQL Native Client (2008)
          But Still it showing the same error

  • Error in client installation

    During client setup installation the message "u201Csetup has failed to automatically login to the server please enter correct login informationu201D appears and it does not allow the completion of the installation.
    We are using MSSQL Server 2005 in Windows 2003 server domain environment.  The ODBC driver installation on the client PC is installed successfully and the connection to SQL is OK.

    Dear George,
    Could you check whether SQL native client is installed, if not install the native client in the workstation and then try to run the client setup.
    Also, you could download the native client from the below mentioned link.
    http://www.microsoft.com/downloads/details.aspx?FamilyID=d09c1d60-a13c-4
    479-9b91-9e8b9d835cdc&DisplayLang=en
    If you still get the error, let me know which version you are using.
    Regards,
    Vijay kumar

  • Cannot install SQL Server Native Client 2012 on Windows Server 2008 Data Center

    Is it possible to install SQL Server Native Client 11.0 (SQL Server 2012) on Windows Server 2008 Datacenter?
    I tried to install it, but I get this error message:
    "Installation of this product failed because it is not supported on this operating system. For information on supported configurations, see the product documentation."
    Based on this article (http://msdn.microsoft.com/en-us/library/cc280356.aspx), I see one of the supported operating system is Windows Server 2008.

    Hello,
    Can you try to download and install Windows Server 2008 Service Pack 2 from the following link, and then reinstall the SQL Server Native Client 11.0 again?
    http://www.microsoft.com/en-in/download/details.aspx?id=16468
    Microsoft SQL Server 2012  Native Client is included in the SQL Server 2012 Feature Pack. Based on the requirement of
    the download page , you should apply SP2 for Windows Server 2008.
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • Facing issues with oracle client installation 32 bit 10.2.0.1

    Hi ,
    I am facing issues with oracle client installation 32 bit 10.2.0.1
    Windows 2008 R2 enterprise edition 64 bit
    Java 1.6 update 34
    Below is the error recieved:
    Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x8079055
    Function=[Unknown.]
    Library=C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\client\jvm.dll
    NOTE: We are unable to locate the function name symbol for the error
          just occurred. Please refer to release documentation for possible
          reason and solutions.
    Current Java thread:
      at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(Native Method)
      at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(OiipwWin32NativeCalls.java:516)
      at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.RegSetValue(OiipwWin32NativeCalls.java:473)
      at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.setInstallerKey(OiipgBootstrap.java:511)
      at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(OiipgBootstrap.java:418)
      at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(OiicSessionInterfaceManager.java:401)
      at oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(OiicInvSetupWCCE.java:217)
      at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
      at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1273)
      at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
      at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:547)
      at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:935)
      at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:872)
    Dynamic libraries:
    0x00400000 - 0x0040B000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\javaw.exe
    0x77C60000 - 0x77DE0000 C:\Windows\SysWOW64\ntdll.dll
    0x75AB0000 - 0x75BC0000 C:\Windows\syswow64\kernel32.dll
    0x77420000 - 0x77467000 C:\Windows\syswow64\KERNELBASE.dll
    0x77370000 - 0x77410000 C:\Windows\syswow64\ADVAPI32.dll
    0x76610000 - 0x766BC000 C:\Windows\syswow64\msvcrt.dll
    0x75DD0000 - 0x75DE9000 C:\Windows\SysWOW64\sechost.dll
    0x776E0000 - 0x777D0000 C:\Windows\syswow64\RPCRT4.dll
    0x757C0000 - 0x75820000 C:\Windows\syswow64\SspiCli.dll
    0x757B0000 - 0x757BC000 C:\Windows\syswow64\CRYPTBASE.dll
    0x77470000 - 0x77570000 C:\Windows\syswow64\USER32.dll
    0x764F0000 - 0x76580000 C:\Windows\syswow64\GDI32.dll
    0x77C30000 - 0x77C3A000 C:\Windows\syswow64\LPK.dll
    0x75820000 - 0x758BD000 C:\Windows\syswow64\USP10.dll
    0x74EA0000 - 0x74EEC000 C:\Windows\system32\apphelp.dll
    0x6EF10000 - 0x6EF9D000 C:\Windows\AppPatch\AcLayers.DLL
    0x76720000 - 0x7736A000 C:\Windows\syswow64\SHELL32.dll
    0x761D0000 - 0x76227000 C:\Windows\syswow64\SHLWAPI.dll
    0x76350000 - 0x764AC000 C:\Windows\syswow64\ole32.dll
    0x75F30000 - 0x75FBF000 C:\Windows\syswow64\OLEAUT32.dll
    0x74660000 - 0x74677000 C:\Windows\system32\USERENV.dll
    0x74650000 - 0x7465B000 C:\Windows\system32\profapi.dll
    0x74340000 - 0x74391000 C:\Windows\system32\WINSPOOL.DRV
    0x74570000 - 0x74582000 C:\Windows\system32\MPR.dll
    0x6E8B0000 - 0x6EAC8000 C:\Windows\AppPatch\AcGenral.DLL
    0x6EFA0000 - 0x6F020000 C:\Windows\system32\UxTheme.dll
    0x6F060000 - 0x6F092000 C:\Windows\system32\WINMM.dll
    0x74840000 - 0x7484F000 C:\Windows\system32\samcli.dll
    0x6F0D0000 - 0x6F0E4000 C:\Windows\system32\MSACM32.dll
    0x74C80000 - 0x74C89000 C:\Windows\system32\VERSION.dll
    0x6F340000 - 0x6F343000 C:\Windows\system32\sfc.dll
    0x6F260000 - 0x6F26D000 C:\Windows\system32\sfc_os.DLL
    0x6F040000 - 0x6F053000 C:\Windows\system32\dwmapi.dll
    0x758C0000 - 0x75A5D000 C:\Windows\syswow64\SETUPAPI.dll
    0x75C90000 - 0x75CB7000 C:\Windows\syswow64\CFGMGR32.dll
    0x77570000 - 0x77582000 C:\Windows\syswow64\DEVOBJ.dll
    0x75DF0000 - 0x75F27000 C:\Windows\syswow64\urlmon.dll
    0x775A0000 - 0x77695000 C:\Windows\syswow64\WININET.dll
    0x75FD0000 - 0x761CF000 C:\Windows\syswow64\iertutil.dll
    0x76230000 - 0x7634E000 C:\Windows\syswow64\CRYPT32.dll
    0x75FC0000 - 0x75FCC000 C:\Windows\syswow64\MSASN1.dll
    0x6F0C0000 - 0x6F0C6000 C:\Windows\system32\SHUNIMPL.DLL
    0x6F030000 - 0x6F03D000 C:\Windows\system32\SortServer2003Compat.dll
    0x75CC0000 - 0x75D20000 C:\Windows\system32\IMM32.DLL
    0x75BC0000 - 0x75C8C000 C:\Windows\syswow64\MSCTF.dll
    0x08000000 - 0x08138000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\client\jvm.dll
    0x10000000 - 0x10007000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\hpi.dll
    0x003F0000 - 0x003FE000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\verify.dll
    0x007B0000 - 0x007C9000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\java.dll
    0x007D0000 - 0x007DE000 C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\zip.dll
    0x051D0000 - 0x052E2000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\awt.dll
    0x052F0000 - 0x05341000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\fontmanager.dll
    0x6E7C0000 - 0x6E8A7000 C:\Windows\system32\ddraw.dll
    0x6F020000 - 0x6F026000 C:\Windows\system32\DCIMAN32.dll
    0x75DA0000 - 0x75DCD000 C:\Windows\syswow64\WINTRUST.dll
    0x6E6F0000 - 0x6E7BC000 C:\Windows\system32\D3DIM700.DLL
    0x05770000 - 0x05793000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\JavaAccessBridge.dll
    0x007E0000 - 0x007E5000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\jawt.dll
    0x007F0000 - 0x007F7000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\JAWTAccessBridge.dll
    0x06340000 - 0x06359000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\oui\lib\win32\oraInstaller.dll
    0x06470000 - 0x0648E000 C:\Users\Administrator\AppData\Local\Temp\2\OraInstall2013-08-22_02-41-00PM\jre\1.4.2\bin\jpeg.dll
    0x776B0000 - 0x776DA000 C:\Windows\syswow64\imagehlp.dll
    0x6E600000 - 0x6E6EB000 C:\Windows\syswow64\dbghelp.dll
    0x776A0000 - 0x776A5000 C:\Windows\syswow64\PSAPI.DLL
    Heap at VM Abort:
    Heap
    def new generation   total 704K, used 90K [0x10010000, 0x100d0000, 0x10770000)
      eden space 640K,  13% used [0x10010000, 0x10026448, 0x100b0000)
      from space 64K,   2% used [0x100c0000, 0x100c07a8, 0x100d0000)
      to   space 64K,   0% used [0x100b0000, 0x100b0000, 0x100c0000)
    tenured generation   total 8436K, used 5698K [0x10770000, 0x10fad000, 0x16010000)
       the space 8436K,  67% used [0x10770000, 0x10d00a40, 0x10d00c00, 0x10fad000)
    compacting perm gen  total 12288K, used 12049K [0x16010000, 0x16c10000, 0x1a010000)
       the space 12288K,  98% used [0x16010000, 0x16bd47a0, 0x16bd4800, 0x16c10000)
    Local Time = Thu Aug 22 14:42:03 2013
    Elapsed Time = 40
    # HotSpot Virtual Machine Error : EXCEPTION_ACCESS_VIOLATION
    # Error ID : 4F530E43505002EF
    # Please report this error at
    # http://java.sun.com/cgi-bin/bugreport.cgi
    # Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
    Thanks

    10.2.0.1 is not supported/certified on Win 2008, so expect issues with the install and/or with using the software.
    Why cannot you use a supported version - minimum is 10.2.0.4, which is only available to customers with an Extended Support contract
    http://docs.oracle.com/cd/B19306_01/relnotes.102/b14264/toc.htm#BABGFAJI
    HTH
    Srini

  • *** [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of UNIQUE KEY constraint 'ClientPushMachine_G_AK'. Cannot insert duplicate key in object 'dbo.ClientPushMachine_G'. The duplicate key value is (16777412). : sp_CP_CheckNewAss

    *** [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of UNIQUE KEY constraint 'ClientPushMachine_G_AK'. Cannot insert duplicate key in object 'dbo.ClientPushMachine_G'. The duplicate key value is (16777412). : sp_CP_CheckNewAssignedMachine
    CCCRT::RunSQLStoredProc - Failed to execute SQL cmd exec [sp_CP_CheckNewAssignedMachine] N'xxx', 1
    CCRQueueRequest::GetRequestFromQueue - Failed to execute SQL cmd sp_CP_CheckNewAssignedMachine
    I get the above issue and the one below at a client site; the error started with the error below then changed to the one reported above and back to the one below. Everything is working as it should but the issues
    started when one of the admins at the data-centre incorrectly applied a gpo which affected a number of service accounts (sccm inclusive) and they expired....hence reporting in sccm got broke as well as this error in the ccm.log file appeared.
    Remote client install still works but I believe this error affects new client discovered by sccm, so in other words devices discovered by sccm do not get the client installed automatically....but if all access and permissions are in place...pushing out the
    client to the new discovered system works, it just not done automatically, which kinda defeats one the reasons for using sccm.
    I have searched the breadth of the tinternet and I can only find two technet reference to the same error  - one says to edit the stored procedure on the sql server which I don't think should be done... Like Jason said and I concur....its bad joo joos.
    The second suggestion, said you should select all the options in the Client Push Installation properties, I have tried this but hasn't solved the problem.
    I am planning to upgrade the site to the R2 CU3 before the end of the year but I would like to resolve this error before the upgrade.
    The site is currently sccm 2012 sp1 
    Any idea?> Resolution? sil vous plait!
    Merci

    Hi ,
    Please back up the database of the SCCM site. Then run the following query against the Site DB and see how it goes.
    DELETE FROM System_SMS_Resident_ARR
    WHERE ItemKey IN (
    SELECT ItemKey FROM vSystem_SMS_Resident_ARR
    GROUP BY ItemKey
    HAVING COUNT(ItemKey) > 1
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Server name is not displaying in Dropdown After client installation

    Server name is not displaying in Dropdown After client installation . what might be a issue

    Hi
    Depending upon the installation issue may be differ, so which SAP version and database version you have installed ?
    you can check
    1. Windows installer
    2  Sql Native client
    is installed or not.
    Thanks
    Kamlesh

  • SCCM Client Installation - Options for "Retry" Setting

    Hey Guys - 
    I've got a fairly straightforward question for you.  When the SCCM Client is installed / deployed to a system, successfully downloads locally, but fails, it retries installation by default every 30 minutes.  When creating an Orchestrator runbook
    for Client Health, I'm needing ccmsetup to try only once.
    So basically, I'm trying to find out how to make ccmsetup.exe not retry installation and simply fail.  There is a "Retry" command line switch for ccmsetup (/retry:<Minutes>) where
    minutes may be specified, however, this does not pertain to the actual installation, but the initial download of the setup files.  It does not have an affect on the client installation, itself.
    Yes, a simple script could be created which could kill the process after X, but prefer a native (or at least better) solution.
    Any ideas?  Thanks!
    Ben K.

    Hey - Thanks for the reply...
    I totally understand what you are saying - but - the only reason I thought I'd ask is because it's being used in an Orchestrator Runbook as mentioned and processes which run after it won't start until it completes.  When it loops, it never completes.
    Basically, yes - I understand what you are saying and have done it 100 times, but in this case was wondering if there was a more "supported" method by chance.
    Thanks - 
    Ben K.

  • Client installs fail for push or manual

    This one has got me stumped, hopefully someone can give me some ideas of what to look at.
    Got two servers I'm trying to install the 2012 R2 client onto two servers, we'll call them DP01 and DP02.  This is part of the process to install the DP role onto these servers.  Doing a push or manual install fails with the below log entries:
    <![LOG[Checking the URL 'HTTPS://SCCM00.Skynet.com:443/CCM_Client/ccmsetup.cab']LOG]!><time="01:13:50.400-120" date="04-20-2014" component="ccmsetup" context="" type="1" thread="2068" file="ccmsetup.cpp:10157">
    <![LOG[PROPFIND 'HTTPS://SCCM00.Skynet.com:443/CCM_Client']LOG]!><time="01:13:50.400-120" date="04-20-2014" component="ccmsetup" context="" type="1" thread="2068" file="httphelper.cpp:807">
    <![LOG[[CCMSETUP] AsyncCallback(): -----------------------------------------------------------------]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068"
    file="httphelper.cpp:698">
    <![LOG[[CCMSETUP] AsyncCallback(): WINHTTP_CALLBACK_STATUS_SECURE_FAILURE Encountered]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068"
    file="httphelper.cpp:699">
    <![LOG[[CCMSETUP]                : dwStatusInformationLength is 4
    ]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:700">
    <![LOG[[CCMSETUP]                : *lpvStatusInformation is 0x1
    ]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:701">
    <![LOG[[CCMSETUP]            : WINHTTP_CALLBACK_STATUS_FLAG_CERT_REV_FAILED is set
    ]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:705">
    <![LOG[[CCMSETUP] AsyncCallback(): -----------------------------------------------------------------]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068"
    file="httphelper.cpp:731">
    <![LOG[Failed to send HTTPS request. (Error at WinHttpSendRequest: 12175)]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="2" thread="2068" file="httphelper.cpp:1214">
    <![LOG[WinHttpRequestReponse failed with a non-recoverable failure, 12175]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:1266">
    <![LOG[Failed to check url HTTPS://SCCM00.Skynet.com:443/CCM_Client/ccmsetup.cab 2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:1597">
    <![LOG[Accessing the URL 'HTTPS://SCCM00.Skynet.com:443/CCM_Client/ccmsetup.cab' failed with 80072F8F]LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="2" thread="2068"
    file="ccmsetup.cpp:10195">
    <![LOG[Checking the URL 'HTTPS://SCCM02.web.Skynet.com:443/CCM_Client/ccmsetup.cab']LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="1" thread="2068"
    file="ccmsetup.cpp:10157">
    <![LOG[PROPFIND 'HTTPS://SCCM02.web.Skynet.com:443/CCM_Client']LOG]!><time="01:14:10.432-120" date="04-20-2014" component="ccmsetup" context="" type="1" thread="2068" file="httphelper.cpp:807">
    <![LOG[Failed to correctly receive a WEBDAV HTTPS request.. (StatusCode at WinHttpQueryHeaders: 403)]LOG]!><time="01:14:11.430-120" date="04-20-2014" component="ccmsetup" context="" type="3" thread="2068"
    file="httphelper.cpp:1370">
    <![LOG[Failed to check url HTTPS://SCCM02.web.Skynet.com:443/CCM_Client/ccmsetup.cab 2014" component="ccmsetup" context="" type="3" thread="2068" file="httphelper.cpp:1597">
    <![LOG[Accessing the URL 'HTTPS://SCCM02.web.Skynet.com:443/CCM_Client/ccmsetup.cab' failed with 80004005]LOG]!><time="01:14:11.430-120" date="04-20-2014" component="ccmsetup" context="" type="2" thread="2068"
    file="ccmsetup.cpp:10195">
    <![LOG[Next retry in 10 minute(s)...]LOG]!><time="01:14:11.430-120" date="04-20-2014" component="ccmsetup" context="" type="0" thread="2068" file="ccmsetup.cpp:8835">
    Now, firewalls on both DP01 and DP02 servers are disabled, as are the domain firewalls on both SCCM00 and SCCM02 servers. 
    I CAN open IE and go to HTTPS://SCCM02.web.Skynet.com:443/CCM_Client and download the files, this works on both DP01 and DP02.  So the server does have access, I can also use SMB to browse to the SCCM installation path on the SCCM server from both DP01/02. 
    Certs on both SCCM servers and DP01/02 servers are valid and not expired. 
    Boundary groups are setup for the servers. 
    Other servers and Windows OS boxes have had no issues with client installs or DP role installs, its just these two. 
    I've restarted both DP and SCCM servers and still get the same error.
    Pinging SCCM servers from DP servers has the correct IP's and times less than 120ms.
    I know the HTTPS 403 error is Access is Denied, but I can browse to the site with no problems...

    certificate chaining issue...
    http://msdn.microsoft.com/en-us/library/windows/desktop/aa383770(v=vs.85).aspx
    Danovich suggests to check your FQDN vs DN:
    http://blog.danovich.com.au/2010/07/09/sccm-clients-not-installing-in-native-mode/
    more here (although CM07 is discussed):
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/931e839f-a85a-41dd-a175-5546d1316463/client-push-problem-with-ca-cert?forum=configmgrsetup
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • [Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator.  'Items' (OITM) (OITM)

    Dear Experts,
    i am getting the below error when i was giving * (Star) to view all the items in DB
    [Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator.  'Items' (OITM) (OITM)
    As i was searching individually it is working fine
    can any one help me how to find this..
    Regards,
    Meghanath.S

    Dear Nithi Anandham,
    i am not having any query while finding all the items in item master data i am giving find mode and in item code i was trying to type *(Star) and enter while typing enter the above issue i was facing..
    Regards,
    Meghanath

  • Oracle 8.1.7 Client Installation Error

    Could anyone tell me what's wrong when JREW error occur during Oracle Client Installation? How to overcome this problem?
    The details are:
    This program has performed an illegal operation and will be shut down.
    Jrew caused an invalid page fault in module JAVAI.DLL at 018f:6ee37f8a.
    Registers: ......
    (OS Win98)
    Thanks in advance.

    You are aware that the 8.1.7 client is only going to enable you to connect to Oracle systems, right? It's not the Oracle 8.1.7 database.
    You should be able to unzip the file and find the Oracle Universal installer which will actually install the 8.1.7 Client for you.

  • Create Client Installer Failing

    I have a brand new Mac Mini running Apple Remote Desktop 3.5.1 on Lion 10.7.3 that I am trying to create a custom client installer and right at the end it fails every single time. Saying that "An unexpected error has occured while creating a custom installer. Please try again"
    Anyone else getting this issue? at all

    Custom Installer Issues with 3.5.2 Client and 3.5.1 Admin
    Do you have a computer that is pre ARD client update 3.5.2? if so, you could try making your installer with ARD on that client. And you could report the issue.
    And you can always send Feedback about ARD to Apple.
    In thread Can't install Apple Remote Desktop 3.5.1 custom installer on Lion 10.7.3, Eric Shaheen suggested looking in //private/tmp/RemoteDesktopClientInstaller/ to see if ARD actually did create the installer; and if so, to copy it to the desktop. in the same thread gavin0001 said he was able to modify the 3.5.2 client update to make a custom installer.
    You might also want to check out thread I can't get Custom Installer to create accounts on Lion.  I'm using ARD 3.5.1.

  • Error in query: [Microsoft][SQL Server Native Client 10.0][SQL Server]Must specify table to select from. '' (SWEI)

    Hi All
    below query giving me error in query generator but working well in Sql server.
    error: [Microsoft][SQL Server Native Client 10.0][SQL Server]Must specify table to select from. '' (SWEI)
    Select
    T1.U_grp01 As 'BA',T3.DocDate As 'Posting Date',Month(T3.DocDate) As 'PostMonth',Year(T3.DocDate) As 'PostYear',
    'AR Invoice' As 'Type',T3.DocNum As 'Doc No',T3.CardCode As 'Cust. Code',T3.CardName As 'Cust. Name',T5.SlpName As 'Sale Emp. Name',
    T4.IndustryC As 'Channel Type',T6.CityB As 'BillToCity',T7.Name As 'BillToState',T6.CityS As 'ShipToCity',T8.Name As 'ShipToState',
    T4.U_Une_Zone As 'Zone',
    T2.ItmsGrpNam As 'L1',T0.LineNum As 'Row No',T0.ItemCode As 'ItemCode',T0.Dscription As 'Item Name',t0.whscode,
    T0.Quantity As 'Quantity',T0.StockPrice As 'COGS Price',IsNull(Sum(T0.Quantity * T0.StockPrice),0) As 'COGS Value',T0.VatSum As 'Tax Amount',
    IsNull((Case When T3.DocType='I' Then (Case  When T0.Currency = 'INR' Then T0.PriceBefDi Else (T0.PriceBefDi * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
    IsNull((Case When T3.DocType='I' Then (Case  When T0.Currency = 'INR' Then T0.INMPrice Else (T0.INMPrice * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
    IsNull((Case When T3.DocType='I' Then (Case  When T0.Currency = 'INR' Then Sum(T0.Quantity * T0.INMPrice) Else Sum(T0.Quantity * T0.INMPrice * T0.Rate) End) Else T0.LineTotal End) ,0) As 'Sales Value',t9.linetotal as 'Freight',
    T3.DocType As 'DocType',
    (SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
    FROM INV4
    WHERE INV4.StaType = -90
    AND INV4.DocEntry = T3.DocEntry
    AND INV4.LineNum = T0.LineNum) AS 'BED',
    (SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
    FROM INV4
    WHERE INV4.StaType = -60
    AND INV4.DocEntry = T3.DocEntry
    AND INV4.LineNum = T0.LineNum) AS 'Cess',
    (SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
    FROM INV4
    WHERE INV4.StaType = 9
    AND INV4.DocEntry = T3.DocEntry
    AND INV4.LineNum = T0.LineNum) AS 'HeCess',
    (SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
    FROM INV4
    WHERE (INV4.StaType = 1 or inv4.staType = 8)
    AND INV4.DocEntry = T3.DocEntry
    AND INV4.LineNum = T0.LineNum) AS 'VAT',
    (SELECT DISTINCT ISNULL (SUM(INV4.TaxSum),0)
    FROM INV4
    WHERE INV4.StaType = 8
    AND INV4.DocEntry = T3.DocEntry
    AND INV4.LineNum = T0.LineNum) AS 'CST'
    From INV1 T0
    Left Join OITM T1 On T1.ItemCode=T0.ItemCode
    Left Join OITB T2 On T2.ItmsGrpCod=T1.ItmsGrpCod
    Left Join OINV T3 On T3.DocEntry=T0.DocEntry
    Left Join OCRD T4 On T4.CardCode=T3.CardCode
    Left Join OSLP T5 On T5.SlpCode=T4.SlpCode
    Left Join INV12 T6 On T6.DocEntry=T0.DocEntry
    Left Join OCST T7 On T7.Code=T6.StateB and T7.Country='IN'
    Left Join OCST T8 On T8.Code=T6.StateS and T8.Country='IN'
    left join inv3 t9 on t9.docentry = t3.docentry
    WHERE T3.[DocDate] >= [%0] and T3.[DocDate] <= [%1] and t3.U_UNE_GCAT = '2'
    Group By T1.U_grp01,T3.DocEntry,T3.DocNum,T3.DocDate,T0.LineNum,T3.CardCode,T3.CardName,T5.SlpName,T4.IndustryC,T4.U_Une_Zone,
    T6.CityB,T7.Name,T6.CityS,T8.Name,T0.VatSum,T0.Currency,T0.Rate,T3.DocType,T0.Price,T0.LineTotal,
    T2.ItmsGrpNam,T0.ItemCode,T0.Dscription,T0.StockPrice,T0.INMPrice,T0.PriceBefDi,T0.Quantity,t9.linetotal,t0.WhsCode
    Union All
    Select
    T1.U_grp01 As 'BA',T3.DocDate As 'Posting Date',Month(T3.DocDate) As 'PostMonth',Year(T3.DocDate) As 'PostYear',
    'AR Invoice' As 'Type',T3.DocNum As 'Doc No',T3.CardCode As 'Cust. Code',T3.CardName As 'Cust. Name',T5.SlpName As 'Sale Emp. Name',
    T4.IndustryC As 'Channel Type',T6.CityB As 'BillToCity',T7.Name As 'BillToState',T6.CityS As 'ShipToCity',T8.Name As 'ShipToState',
    T4.U_Une_Zone As 'Zone',
    T2.ItmsGrpNam As 'L1',T0.LineNum As 'Row No',T0.ItemCode As 'ItemCode',T0.Dscription As 'Item Name',t0.whscode,
    T0.Quantity As 'Quantity',T0.StockPrice As 'COGS Price',IsNull(Sum(T0.Quantity * T0.StockPrice),0) As 'COGS Value',T0.VatSum As 'Tax Amount',
    IsNull((Case When T3.DocType='I' Then (Case  When T0.Currency = 'INR' Then T0.PriceBefDi Else (T0.PriceBefDi * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
    IsNull((Case When T3.DocType='I' Then (Case  When T0.Currency = 'INR' Then T0.INMPrice Else (T0.INMPrice * T0.Rate) End) Else T0.Price End) ,0) As 'Sales Price',
    IsNull((Case When T3.DocType='I' Then (Case  When T0.Currency = 'INR' Then Sum(T0.Quantity * T0.INMPrice) Else Sum(T0.Quantity * T0.INMPrice * T0.Rate) End) Else T0.LineTotal End) ,0) As 'Sales Value',t9.linetotal as 'Freight',
    T3.DocType As 'DocType',
    (SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
    FROM rin4
    WHERE rin4.StaType = -90
    AND rin4.DocEntry = T3.DocEntry
    AND rin4.LineNum = T0.LineNum) AS 'BED',
    (SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
    FROM rin4
    WHERE rin4.StaType = -60
    AND rin4.DocEntry = T3.DocEntry
    AND rin4.LineNum = T0.LineNum) AS 'Cess',
    (SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
    FROM rin4
    WHERE rin4.StaType = 9
    AND rin4.DocEntry = T3.DocEntry
    AND rin4.LineNum = T0.LineNum) AS 'HeCess',
    (SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
    FROM rin4
    WHERE (rin4.StaType = 1 or rin4.staType = 8)
    AND rin4.DocEntry = T3.DocEntry
    AND rin4.LineNum = T0.LineNum) AS 'VAT',
    (SELECT DISTINCT ISNULL (SUM(rin4.TaxSum),0)
    FROM rin4
    WHERE rin4.StaType = 8
    AND rin4.DocEntry = T3.DocEntry
    AND rin4.LineNum = T0.LineNum) AS 'CST'
    From rin1 T0
    Left Join OITM T1 On T1.ItemCode=T0.ItemCode
    Left Join OITB T2 On T2.ItmsGrpCod=T1.ItmsGrpCod
    Left Join Orin T3 On T3.DocEntry=T0.DocEntry
    Left Join OCRD T4 On T4.CardCode=T3.CardCode
    Left Join OSLP T5 On T5.SlpCode=T4.SlpCode
    Left Join rin12 T6 On T6.DocEntry=T0.DocEntry
    Left Join OCST T7 On T7.Code=T6.StateB and T7.Country='IN'
    Left Join OCST T8 On T8.Code=T6.StateS and T8.Country='IN'
    left join rin3 t9 on t9.docentry = t3.docentry
    WHERE T3.[DocDate] >= [%0] and T3.[DocDate] <= [%1] and t3.U_UNE_GCAT = '2'
    Group By T1.U_grp01,T3.DocEntry,T3.DocNum,T3.DocDate,T0.LineNum,T3.CardCode,T3.CardName,T5.SlpName,T4.IndustryC,T4.U_Une_Zone,
    T6.CityB,T7.Name,T6.CityS,T8.Name,T0.VatSum,T0.Currency,T0.Rate,T3.DocType,T0.Price,T0.LineTotal,
    T2.ItmsGrpNam,T0.ItemCode,T0.Dscription,T0.StockPrice,T0.INMPrice,T0.PriceBefDi,T0.Quantity,t9.linetotal,t0.WhsCode
    Thanks in Advance

    Hi deepak..
    try this
    /* SELECT FROM OSRT P1 */
    DECLARE @FROM AS DATE
    /* WHERE */
    SET @FROM = /* P1.FromDate */ '[%1]'
    /* SELECT FROM OSRT P2 */
    DECLARE @TO AS DATE
    /* WHERE */
    SET @TO = /* P2.ToDate */ '[%2]';
    SELECT T1.U_grp01 AS 'BA',
           T3.DocDate AS 'Posting Date',
           MONTH(T3.DocDate) AS 'PostMonth',
           YEAR(T3.DocDate) AS 'PostYear',
           'AR Invoice' AS 'Type',
           T3.DocNum AS 'Doc No',
           T3.CardCode AS 'Cust. Code',
           T3.CardName AS 'Cust. Name',
           T5.SlpName AS 'Sale Emp. Name',
           T4.IndustryC AS 'Channel Type',
           T6.CityB AS 'BillToCity',
           T7.Name AS 'BillToState',
           T6.CityS AS 'ShipToCity',
           T8.Name AS 'ShipToState',
           T4.U_Une_Zone AS 'Zone',
           T2.ItmsGrpNam AS 'L1',
           T0.LineNum AS 'Row No',
           T0.ItemCode AS 'ItemCode',
           T0.Dscription AS 'Item Name',
           t0.whscode,
           T0.Quantity AS 'Quantity',
           T0.StockPrice AS 'COGS Price',
           ISNULL(SUM(T0.Quantity * T0.StockPrice), 0) AS 'COGS Value',
           T0.VatSum AS 'Tax Amount',
           ISNULL(
                   CASE
                        WHEN T3.DocType = 'I' THEN (
                                 CASE
                                      WHEN T0.Currency = 'INR' THEN T0.PriceBefDi
                                      ELSE (T0.PriceBefDi * T0.Rate)
                                 END
                        ELSE T0.Price
                   END
               0
           ) AS 'Sales Price',
           ISNULL(
                   CASE
                        WHEN T3.DocType = 'I' THEN (
                                 CASE
                                      WHEN T0.Currency = 'INR' THEN T0.INMPrice
                                      ELSE (T0.INMPrice * T0.Rate)
                                 END
                        ELSE T0.Price
                   END
               0
           ) AS 'Sales Price',
           ISNULL(
                   CASE
                        WHEN T3.DocType = 'I' THEN (
                                 CASE
                                      WHEN T0.Currency = 'INR' THEN SUM(T0.Quantity * T0.INMPrice)
                                      ELSE SUM(T0.Quantity * T0.INMPrice * T0.Rate)
                                 END
                        ELSE T0.LineTotal
                   END
               0
           ) AS 'Sales Value',
           t9.linetotal AS 'Freight',
           T3.DocType AS 'DocType',
               SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
               FROM   INV4
               WHERE  INV4.StaType = -90
                      AND INV4.DocEntry = T3.DocEntry
                      AND INV4.LineNum = T0.LineNum
           ) AS 'BED',
               SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
               FROM   INV4
               WHERE  INV4.StaType = -60
                      AND INV4.DocEntry = T3.DocEntry
                      AND INV4.LineNum = T0.LineNum
           ) AS 'Cess',
               SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
               FROM   INV4
               WHERE  INV4.StaType = 9
                      AND INV4.DocEntry = T3.DocEntry
                      AND INV4.LineNum = T0.LineNum
           ) AS 'HeCess',
               SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
               FROM   INV4
               WHERE  (INV4.StaType = 1 OR inv4.staType = 8)
                      AND INV4.DocEntry = T3.DocEntry
                      AND INV4.LineNum = T0.LineNum
           ) AS 'VAT',
               SELECT DISTINCT ISNULL(SUM(INV4.TaxSum), 0)
               FROM   INV4
               WHERE  INV4.StaType = 8
                      AND INV4.DocEntry = T3.DocEntry
                      AND INV4.LineNum = T0.LineNum
           ) AS 'CST'
    FROM   INV1 T0
           LEFT JOIN OITM T1
                ON  T1.ItemCode = T0.ItemCode
           LEFT JOIN OITB T2
                ON  T2.ItmsGrpCod = T1.ItmsGrpCod
           LEFT JOIN OINV T3
                ON  T3.DocEntry = T0.DocEntry
           LEFT JOIN OCRD T4
                ON  T4.CardCode = T3.CardCode
           LEFT JOIN OSLP T5
                ON  T5.SlpCode = T4.SlpCode
           LEFT JOIN INV12 T6
                ON  T6.DocEntry = T0.DocEntry
           LEFT JOIN OCST T7
                ON  T7.Code = T6.StateB
                AND T7.Country = 'IN'
           LEFT JOIN OCST T8
                ON  T8.Code = T6.StateS
                AND T8.Country = 'IN'
           LEFT JOIN inv3 t9
                ON  t9.docentry = t3.docentry
    WHERE  T3.[DocDate] >= @FROM
           AND T3.[DocDate] <= @TO
           AND t3.U_UNE_GCAT = '2'
    GROUP BY
           T1.U_grp01,
           T3.DocEntry,
           T3.DocNum,
           T3.DocDate,
           T0.LineNum,
           T3.CardCode,
           T3.CardName,
           T5.SlpName,
           T4.IndustryC,
           T4.U_Une_Zone,
           T6.CityB,
           T7.Name,
           T6.CityS,
           T8.Name,
           T0.VatSum,
           T0.Currency,
           T0.Rate,
           T3.DocType,
           T0.Price,
           T0.LineTotal,
           T2.ItmsGrpNam,
           T0.ItemCode,
           T0.Dscription,
           T0.StockPrice,
           T0.INMPrice,
           T0.PriceBefDi,
           T0.Quantity,
           t9.linetotal,
           t0.WhsCode
    UNION ALL
    SELECT T1.U_grp01 AS 'BA',
           T3.DocDate AS 'Posting Date',
           MONTH(T3.DocDate) AS 'PostMonth',
           YEAR(T3.DocDate) AS 'PostYear',
           'AR Invoice' AS 'Type',
           T3.DocNum AS 'Doc No',
           T3.CardCode AS 'Cust. Code',
           T3.CardName AS 'Cust. Name',
           T5.SlpName AS 'Sale Emp. Name',
           T4.IndustryC AS 'Channel Type',
           T6.CityB AS 'BillToCity',
           T7.Name AS 'BillToState',
           T6.CityS AS 'ShipToCity',
           T8.Name AS 'ShipToState',
           T4.U_Une_Zone AS 'Zone',
           T2.ItmsGrpNam AS 'L1',
           T0.LineNum AS 'Row No',
           T0.ItemCode AS 'ItemCode',
           T0.Dscription AS 'Item Name',
           t0.whscode,
           T0.Quantity AS 'Quantity',
           T0.StockPrice AS 'COGS Price',
           ISNULL(SUM(T0.Quantity * T0.StockPrice), 0) AS 'COGS Value',
           T0.VatSum AS 'Tax Amount',
           ISNULL(
                   CASE
                        WHEN T3.DocType = 'I' THEN (
                                 CASE
                                      WHEN T0.Currency = 'INR' THEN T0.PriceBefDi
                                      ELSE (T0.PriceBefDi * T0.Rate)
                                 END
                        ELSE T0.Price
                   END
               0
           ) AS 'Sales Price',
           ISNULL(
                   CASE
                        WHEN T3.DocType = 'I' THEN (
                                 CASE
                                      WHEN T0.Currency = 'INR' THEN T0.INMPrice
                                      ELSE (T0.INMPrice * T0.Rate)
                                 END
                        ELSE T0.Price
                   END
               0
           ) AS 'Sales Price',
           ISNULL(
                   CASE
                        WHEN T3.DocType = 'I' THEN (
                                 CASE
                                      WHEN T0.Currency = 'INR' THEN SUM(T0.Quantity * T0.INMPrice)
                                      ELSE SUM(T0.Quantity * T0.INMPrice * T0.Rate)
                                 END
                        ELSE T0.LineTotal
                   END
               0
           ) AS 'Sales Value',
           t9.linetotal AS 'Freight',
           T3.DocType AS 'DocType',
               SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
               FROM   rin4
               WHERE  rin4.StaType = -90
                      AND rin4.DocEntry = T3.DocEntry
                      AND rin4.LineNum = T0.LineNum
           ) AS 'BED',
               SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
               FROM   rin4
               WHERE  rin4.StaType = -60
                      AND rin4.DocEntry = T3.DocEntry
                      AND rin4.LineNum = T0.LineNum
           ) AS 'Cess',
               SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
               FROM   rin4
               WHERE  rin4.StaType = 9
                      AND rin4.DocEntry = T3.DocEntry
                      AND rin4.LineNum = T0.LineNum
           ) AS 'HeCess',
               SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
               FROM   rin4
               WHERE  (rin4.StaType = 1 OR rin4.staType = 8)
                      AND rin4.DocEntry = T3.DocEntry
                      AND rin4.LineNum = T0.LineNum
           ) AS 'VAT',
               SELECT DISTINCT ISNULL(SUM(rin4.TaxSum), 0)
               FROM   rin4
               WHERE  rin4.StaType = 8
                      AND rin4.DocEntry = T3.DocEntry
                      AND rin4.LineNum = T0.LineNum
           ) AS 'CST'
    FROM   rin1 T0
           LEFT JOIN OITM T1
                ON  T1.ItemCode = T0.ItemCode
           LEFT JOIN OITB T2
                ON  T2.ItmsGrpCod = T1.ItmsGrpCod
           LEFT JOIN [dbo].[Orin] T3
                ON  T3.DocEntry = T0.DocEntry
           LEFT JOIN OCRD T4
                ON  T4.CardCode = T3.CardCode
           LEFT JOIN OSLP T5
                ON  T5.SlpCode = T4.SlpCode
           LEFT JOIN rin12 T6
                ON  T6.DocEntry = T0.DocEntry
           LEFT JOIN OCST T7
                ON  T7.Code = T6.StateB
                AND T7.Country = 'IN'
           LEFT JOIN OCST T8
                ON  T8.Code = T6.StateS
                AND T8.Country = 'IN'
           LEFT JOIN rin3 t9
                ON  t9.docentry = t3.docentry
    WHERE  T3.[DocDate] >= @FROM
           AND T3.[DocDate] <= @TO
           AND t3.U_UNE_GCAT = '2'
    GROUP BY
           T1.U_grp01,
           T3.DocEntry,
           T3.DocNum,
           T3.DocDate,
           T0.LineNum,
           T3.CardCode,
           T3.CardName,
           T5.SlpName,
           T4.IndustryC,
           T4.U_Une_Zone,
           T6.CityB,
           T7.Name,
           T6.CityS,
           T8.Name,
           T0.VatSum,
           T0.Currency,
           T0.Rate,
           T3.DocType,
           T0.Price,
           T0.LineTotal,
           T2.ItmsGrpNam,
           T0.ItemCode,
           T0.Dscription,
           T0.StockPrice,
           T0.INMPrice,
           T0.PriceBefDi,
           T0.Quantity,
           t9.linetotal,
           t0.WhsCode
    rgds
    Kennedy

  • Oracle 11g client installation on Windows 7 Home Premium (64-bit)

    I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
    Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
    Thanks!

    Hi;
    As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
    Regard
    Helios

Maybe you are looking for

  • Printing HTML documents in SAP GUI for HTML

    Hi, I created an SAP Transaction iView with the transaction PR05 (Travel Expense Manager). Now I'd like to print the selected trips via the print function either in html or pdf. I already created a pdf printer and it works fine. Is there also a possi

  • Label not resizing

    When I do setText on a Label which I created empty it does not resize correctly so the whole text is not visible. What more should I do to make it resize? myLabel.invalidate() dos nothing to it. The Label is added to a Pane which is in its turn added

  • Setting up a virtual PDF printer in MacOS

    On my previous Mac (System 10.4), I had set up a virtual PDF printer called Adobe PDF 3016.102. I had Creative Suite installed at the time, but I'm not sure if that's relevant. I can't remember how I installed that virtual printer. Now I have two new

  • Is there any chance/way for an ipad2 bought in UAE to have a facetime application?

    hi everyone! hoping you can share some ideas or help me with my query. much appreciated.

  • Hard drive going bad ??

    My drive is making like a clanging noise . Still working but slowing down I think . I want to replace it . Will any IDE 2.5  hard drive work ?? Also after I instal do I just run the OSX  reinstall the operating system and will be good to go ????