Need 2D and 3D plotting api info

Hi all,
I am looking for a plotting api to purchase to use in a java applet in a browser. I have looked for a couple of days now and can't seem to find what I need. I need it to plot 2D and 3d data sets of around 100,000 points. The comercial product we are currently using is great and easy to use, but it just can't handle large 3D data sets.
thanks in advance for any input!

Sounds like you need Java3D. But I'm not sure exactly what you're doing. There are convertors out there that will convert post data into meshes and what not. But I'm not sure if you're trying to do this in real-time or what.

Similar Messages

HT5622 My ipad hangs up after showing a message that says it "Cannot Access Find My Friends" and that I need to open the app and review my signin info to continue sharing. I can't go there because it is hung up. I also can't power off.

My ipad hangs up after showing a message that says it "Cannot Access Find My Friends" and that I need to open the app and review my signin info to continue sharing. I can't go there because it is hung up. I also can't power off.

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

I recently destroyed my macbook pro and lost all my info. I need to redownload my programs. I bought CS5.5, but was upgraded to CS6 because it was purchased just a few weeks before its release. How do I do this? Thanks!

Hi!
I recently destroyed my macbook pro and lost all my info. I need to redownload my programs. I bought CS5.5, but was upgraded to CS6 because it was purchased just a few weeks before its release. How do I do this? Thanks!

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Since I downloaded Apple's latest operating system, whenever I try to open Illustrator I get a message that I need to install legacy Java SE6 runtime and to click "more info" to do this. When I click "more info" I get a blank window. What should I do

Since I downloaded Apple's latest operating system, whenever I try to open Illustrator I get a message that I need to install legacy Java SE6 runtime and to click "more info" to do this. When I click "more info" I get a blank window. What should I do

Hi,
I had the same problem after upgrading to Yosemite. Illustrator CS6 wouldn't open. I got a message saying I should 'install legacy Java SE6 runtime'.
The link didn't work - it lead to a blank page.
So I downloaded Java8 (latest version) from Oracle but didn't install it. Something told me this was not the right way to go (the problem was with Java SE6, not 8). I then called Apple (in the Netherlands, were I live) for help. I got none. The best they could do was blaming Adobe for the problem or me, for not having the latest Adobe CC app. Rubbish.
And then, magic. I tried to open Illustrator again, got the pop up message but this time the link worked. It took me to an official Apple page, with a link to download Java for OS X 2014-001. The problem is now solved.
If curious, this is the explanation Apple gives for the problem:
'Java for OS X 2014-001 includes installation improvements, and supersedes all previous versions of Java for OS X. This package installs the same version of Java 6 included in Java for OS X 2013-005. On systems that have not already installed Java for OS X 2012-006 or later, this update disables the Java SE 6 applet plug-in. To use applets on a web page, click on the region labeled 'missing plug-in' to download the latest version of the Java applet plug-in from Oracle.'
See http://support.apple.com/kb/HT6133 for more details about this update.
See http://support.apple.com/kb/HT1222 for information about the security content of this update.

I need to change my credit card info as well as my address and country - I have moved from NZ to Australia - How do I change the country?

Does anyone know how to change the country associated with your CC account. I need to change my credit card info as well as my address and country - I have moved from NZ to Australia and would like info on how to do this.

Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html

Datapump exp and imp using API method

Good Day All,
I want to know what is the best way of error handling of datapump export and Import using API. I need to implement in my current project as there lot of limitations and the only way to see the process worked is writing the code with error handling method using exceptions. I have seen some examples on the web but if there are practicle examples or good links with examples that will work sure way, I would like to know and explore. I have never used API method so I am not sure of it.
Thanks a lot for your time.
Maggie.

I wrote the procedure with error handling but it does not out put any information of the statuses while kicking off the expdp process. I have put dbms_output.put_line as per oracle docs example but it doesnt display any messages, just kicks off and created dumpfiles. As a happy path its ok but I need to track if something goes wrong. I even stated set serveroutput on sqlplus. It doesnt even display if job started. Please help me where I made a mistake to display the status . Do I need to modify or add anything. Help!!
CREATE OR REPLACE PROCEDURE SCHEMAS_EXPORT_TEST AS
--Using Exception Handling During a Simple Schema Export
--This Proceedure shows a simple schema export using the Data Pump API.
--It extends to show how to use exception handling to catch the SUCCESS_WITH_INFO case,
--and how to use the GET_STATUS procedure to retrieve additional information about errors.
--If you want to get status up to the current point, but a handle has not yet been obtained,
--you can use NULL for DBMS_DATAPUMP.GET_STATUS.http://docs.oracle.com/cd/B19306_01/server.102/b14215/dp_api.htm
h1 number; -- Data Pump job handle
l_handle number;
ind NUMBER; -- Loop index
spos NUMBER; -- String starting position
slen NUMBER; -- String length for output
percent_done NUMBER; -- Percentage of job complete
job_state VARCHAR2(30); -- To keep track of job state
sts ku$_Status; -- The status object returned by get_status
le ku$_LogEntry; -- For WIP and error messages
js ku$_JobStatus; -- The job status from get_status
jd ku$_JobDesc; -- The job description from get_status
BEGIN
h1 := dbms_datapump.open (operation => 'EXPORT',job_mode => 'SCHEMA');
dbms_datapump.add_file (handle => h1,filename => 'SCHEMA_BKP_%U.DMP',directory => 'BKP_SCHEMA_EXPIMP',filetype => DBMS_DATAPUMP.KU$_FILE_TYPE_DUMP_FILE);
dbms_datapump.add_file (handle => h1,directory => 'BKP_SCHEMA_EXPIMP',filename => 'SCHEMA_BKP_EX.log',filetype => DBMS_DATAPUMP.KU$_FILE_TYPE_LOG_FILE);
---- A metadata filter is used to specify the schema that will be exported.
dbms_datapump.metadata_filter (handle => h1, name => 'SCHEMA_LIST',value => q'|'XXXXXXXXXX'|');
dbms_datapump.set_parallel( handle => h1, degree => 4);
-- Start the job. An exception will be returned if something is not set up
-- properly.One possible exception that will be handled differently is the
-- success_with_info exception. success_with_info means the job started
-- successfully, but more information is available through get_status about
-- conditions around the start_job that the user might want to be aware of.
begin
dbms_datapump.start_job (handle => h1);
dbms_output.put_line('Data Pump job started successfully');
exception
when others then
if sqlcode = dbms_datapump.success_with_info_num
then
dbms_output.put_line('Data Pump job started with info available:');
dbms_datapump.get_status(h1,
dbms_datapump.ku$_status_job_error,0,
job_state,sts);
if (bitand(sts.mask,dbms_datapump.ku$_status_job_error) != 0)
then
le := sts.error;
if le is not null
then
ind := le.FIRST;
while ind is not null loop
dbms_output.put_line(le(ind).LogText);
ind := le.NEXT(ind);
end loop;
end if;
end if;
else
raise;
end if;
end;
-- The export job should now be running. In the following loop, we will monitor the job until it completes.
-- In the meantime, progress information is displayed.
percent_done := 0;
job_state := 'UNDEFINED';
while (job_state != 'COMPLETED') and (job_state != 'STOPPED') loop
dbms_datapump.get_status(h1,
dbms_datapump.ku$_status_job_error +
dbms_datapump.ku$_status_job_status +
dbms_datapump.ku$_status_wip,-1,job_state,sts);
js := sts.job_status;
-- If the percentage done changed, display the new value.
if js.percent_done != percent_done
then
dbms_output.put_line('*** Job percent done = ' ||to_char(js.percent_done));
percent_done := js.percent_done;
end if;
-- Display any work-in-progress (WIP) or error messages that were received for
-- the job.
if (bitand(sts.mask,dbms_datapump.ku$_status_wip) != 0)
then
le := sts.wip;
else
if (bitand(sts.mask,dbms_datapump.ku$_status_job_error) != 0)
then
le := sts.error;
else
le := null;
end if;
end if;
if le is not null
then
ind := le.FIRST;
while ind is not null loop
dbms_output.put_line(le(ind).LogText);
ind := le.NEXT(ind);
end loop;
end if;
end loop;
-- Indicate that the job finished and detach from it.
dbms_output.put_line('Job has completed');
dbms_output.put_line('Final job state = ' || job_state);
dbms_datapump.detach (handle => h1);
-- Any exceptions that propagated to this point will be captured. The
-- details will be retrieved from get_status and displayed.
Exception
when others then
dbms_output.put_line('Exception in Data Pump job');
dbms_datapump.get_status(h1,dbms_datapump.ku$_status_job_error,0, job_state,sts);
if (bitand(sts.mask,dbms_datapump.ku$_status_job_error) != 0)
then
le := sts.error;
if le is not null
then
ind := le.FIRST;
while ind is not null loop
spos := 1;
slen := length(le(ind).LogText);
if slen > 255
then
slen := 255;
end if;
while slen > 0 loop
dbms_output.put_line(substr(le(ind).LogText,spos,slen));
spos := spos + 255;
slen := length(le(ind).LogText) + 1 - spos;
end loop;
ind := le.NEXT(ind);
end loop;
end if;
end if;
END SCHEMAS_EXPORT_TEST;

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split i have a new laptop and now it keeps asking for the old ID or it'll erase my apps bought on theold account.

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split up and now im trying to get all my apps and info onto my new laptop with a new account but it keeps asking me for the old apple ID which she is still using and she changed the password. i tried backing it up but still nohing. When i try to back up purchased items being apps etc its keeps asking for the old one. help

See Recover your iTunes library from your iPod or iOS device. But you'll still need the password.
Once you have the computer authorized to use the account she could change the password again to stop you buying apps on her card (assuming it's not on yours!). It would lock you out of upgrading them too but they should work unless she uses the deathorize all feature.
It depends on how amicable the split is...
tt2

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on get info . What am I suppose to change in the setting on getinf

Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Need to "publish/subscribe" my Contacts info like we could in Addressbook. Any ideas?

Being a LONG TIME Mac User (yes, I owned a Lisa in the early 80’s and it still runs!) I have lived thru the transition from OS 6 and 7, then 8, 9 and finally the upgrade to OSX and thru its incarnations up to my current Maverick (aka OS 10.9.4). I am no stranger to changes on the Mac OS. But the new Contacts file within iCloud has me lost. For many years my spouse and I would cross share portions of our personal AddressBook using that softwares publish/subscribe function. It worked great! I could have a list of his relatives/names/phones/addresses in case I needed them - and he had the same for me. With a glance he could see that my sisters middle name was Louise and she hated it. Useful info for when she was being icy to him on a phone call. <grin> We had the shared groups identified as coming from my AddressBook or his, and we could share subgroups or the entire thing as we might choose.
When we went to iCloud and now Maverick, there is no longer a way to share the contact info short of buying the Apple Server software and setting up our own server in house. While I might be able to justify doing so, it is a huge hassle for a very small gain in our case. So that is a last-resort solution, so far.
I would again like to be able to share portions (groups/or sub-groups) of my contact database files with specific individuals, using something like a publish/subscribe feature that would require both parties to agree to the sharing and then once that was done, it should implement automatically and update every time an items is changed, added, deleted on the owners main copy of Contacts. Ideally this would work thru iCloud and its “push update” function. But just to have it working is the goal here. I really do not care HOW it works.
Ive searched, even called a buddy who works the Genius Bar at my local Apple Store. So far, no one seems to have any suggestion other than the aforementioned Maverick Server idea. Frankly with three computers, two printers, a few iPads and iPhones, and a couple of Apple TVs in the house, I am hard pressed to justify the time and energy running a server would require. There has to be a better way to do this. If friends can push their Contact Info to their Android Phones, I should be able to share my Contact files with my spouse! Thanks for your thoughts/suggestions/and hopefully for a solution.

Is the disk cache and the memory cache enabled?
You can check these prefs on the about:config page.
* http://kb.mozillazine.org/browser.cache.disk.enable
* http://kb.mozillazine.org/browser.cache.memory.enable
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
Your More system details list shows two outdated Flash plugins that you should remove and update to Flash 10.1 r102 or at least remove 10.0 r45 and wait until your distribution offers a 10.1 r102 update.
# Shockwave Flash 10.0 r45
# Shockwave Flash 10.1 r85
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

My ipad was in recovery mode and it went back to the home screen and it found my info on itunes to the point where i can put music on it but it still says connect to itunes

my ipad was in recovery mode and it went back to the home screen and it found my info on itunes to the point where i can put music on it but it still says connect to itunes

sarahwood wrote:
.. it said my iPod was in recovery mode and I needed to restore it?
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
To minimise loss... after the successful Recovery... Restore from the most recent Backup...
See Restore from Backup here
http://support.apple.com/kb/ht1766

Is it possible to import and display/plot (Google Earth) KML files as overlays in Mac OS 10.9 Maps application?

Is it possible to import and display/plot (Google Earth) KVM files as overlays in Mac OS 10.9 Maps application?
Here is the particular application: (note I haven't gotten the code to compile yet -- seems to be several differently named environment variables in Mac unix than in Linux that are making the compile blow up -- but that's another issue) there is a freeware application that can do radio path loss prediction and plot path loss contours on a map. It has an option to output the data as KML files which can be imported into Google Earth, in order to display the path loss contours on Google Earth maps. I guess you could liken it to displaying overlays of GIS-like data in Google Earth. I would like to know if there is a mechanism to facilitate importing KML data files to overlay (preferably in a translucent fasion so that you could see the underlying map) onto Mac OS 10.9 Maps?

varjak paw wrote:
They're also known to patent things they never release. So while it indicates that they're investigating such things, a patent application is no guarantee that anything will ever come of it, much less be immanent. And that application was filed in 2012 and is really for something rather different.
Regards.
As I stated, "possibly."
While the commerce side of it has little to do with the KML files, per se, the API for the layer data should allow for any type of overlay.
Also, the patent was filed Dec 19, 2013. There was a related patent filed in 2012. Not sure what it is about.

I just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password 9which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

i just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password (which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

I assume that you don't have the installation discs, so:
1. Reboot
2. Hold command + s key down after you hear the chime.
3. When you get a text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
(Type these commands very carefully)
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
4. You will go through the setup process again, create a new admin account, login to it and then change your existing account password or whatever else you need to do. You can delete the account you made in this process, or not.

Csv file reading and voltage and current plotting with respect to time samples XY plotting

Hallo,
I've been struggling with reading a comma separated value (csv) file from another instrument (attached). I need to plot this data for analysis. I have 5 column of data with numbers of rows, the first three row is the information of the measurement. I want to read 4th row as string and rest of the row as numbers. I want to plot 2nd column (i1) with respect to TIMESTAMP; 4th column(u2) wrt TIMESTAMP. And finally plotting i1 (x-axis) vs.. u2 (y-axis) in labview. Could anyone help me.
In excel its so easy to plot but I don't know how its done in labview.
Attachments:
labview forum test.csv ‏30 KB
excel plot.jpg ‏88 KB

Start by opening the file. Then use the Read Text File function. You can right-click on it and configure it to read lines. First make it read 3 lines (this is your extra header data). Then make it read a single line. That will give you your channel names. Then read the rest of the file (disable the read by line and wire a -1 into the number of bytes to read). Then use the Spreadsheet String to Array function to give you your data.
I would recommend going through the LabVIEW tutorials if you are really new at this.
LabVIEW Basics
LabVIEW 101
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to read two text files using the Read from spreadsheet.vi and then plot it

I need to read two text files using the read from spreadsheet function and then plot these files over time.
The file with the .res extention is the RMS values (dt and df) and the second file contains the amplitude of a frequency spectrum.
I really appreciate any help..thanks
Attachments:
RMS.txt ‏1 KB
FREQUENCY.txt ‏1 KB

From NI Example Finder:
Write to Text File.vi
Read from Text File.vi
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp

Need 2D and 3D plotting api info

Similar Messages

Maybe you are looking for