Need a powershell script that will modify the path of an existing Outlook 2010 OST file

For new users we have a GPO in place that creates the OST file in the correct location. The GPO also works on existing users who create a new Outlook Profile.
The problem I am trying to solve is modifying an existing Outlook Profile and changing the location that the OST file is written to.
I have to put the users OST file on the network. Yes, I do know that this is not supported by Microsoft, but I have zero clients (WYSE units) on non-persistent VMware virtual machines. This means they cannot keep the OST file on the PC.
Our email provider requires us to run in Cached-Mode so OST files are here to stay.
Forcing 3000 users to create new Outlook profiles would not have a good outcome.
I also have to relocate their PST files onto the network, which is also not supported. I have been able to connect PST's with powershell, but disconnecting them has been challenging (can't make it work even once) so if I could get some help with that
too that would be excellent.
Thanks

Hi,
You may refer to the following article to create the registry keys and deploy it with logon script:
http://www.slipstick.com/exchange/moving-outlook-ost-file/
Best regards,
Rex Zhang
TechNet Community Support

Similar Messages

I need a logout script that will erase the standard user account data after logout.

I have a lab of 35 Macbook Pros and I am trying to make it where when the user logouts, it will erase the data after they logout.
I have found several articles about deleting user accounts when they login through AD, but this is not the case.
Any help would be much help!

Then when they are at those system they do not Login and if they do have to enter a password it is whatever it is for the Base user account that is setup. Right?
I'd look at the Mac KB system to see if you can restrict saving to the local HDD but yet allow saving to a thumb drive or not.
To do what you want the system would need to keep track of all files saved from time X to time Y, and those times would be every changing. Not sure you are going to get there from here.
Not sure what you mean by Lab machines. I've worked in and gone to school at a Graphic art school and they have hundreds of Lab Mac's that each student must log into with there own user account when in different classes and when saving any of there work it gets saved on the server so it can be retrieved by them when they log into another system someplace else throughout the school or when using their own computer and connected to the schools network.
I wish you the best of luck with this project.

I need a script that will find the computer a user last logged into.

I am still learning scripting, I need a script that will allow me to pull in usernames from a csv file. Find what computer they last logged into and output that to an csv file.
I have looked all over and can't find exactly what I need.
I found the following script but I need to add the resuitsize unlimited but can not figure out where to put it we have a large environment. Also I need to be able to grab username from a csv file. Any assistance you can provide is appreciated.
## Find out what computers a user is logged into on your domain by running the script
## and entering in the requested logon id for the user.
## This script requires the free Quest ActiveRoles Management Shell for Active Directory
## snapin http://www.quest.com/powershell/activeroles-server.aspx
Add-PSSnapin Quest.ActiveRoles.ADManagement -ErrorAction SilentlyContinue
$ErrorActionPreference = "SilentlyContinue"
# Retrieve Username to search for, error checks to make sure the username
# is not blank and that it exists in Active Directory
Function Get-Username {
$Global:Username = Read-Host "Enter username you want to search for"
if ($Username -eq $null){
Write-Host "Username cannot be blank, please re-enter username!!!!!"
Get-Username}
$UserCheck = Get-QADUser -SamAccountName $Username
if ($UserCheck -eq $null){
Write-Host "Invalid username, please verify this is the logon id for the account"
Get-Username}
get-username resultsize unlimited
$computers = Get-QADComputer | where {$_.accountisdisabled -eq $false}
foreach ($comp in $computers)
$Computer = $comp.Name
$ping = new-object System.Net.NetworkInformation.Ping
$Reply = $null
$Reply = $ping.send($Computer)
if($Reply.status -like 'Success'){
#Get explorer.exe processes
$proc = gwmi win32_process -computer $Computer -Filter "Name = 'explorer.exe'"
#Search collection of processes for username
ForEach ($p in $proc) {
$temp = ($p.GetOwner()).User
if ($temp -eq $Username){
write-host "$Username is logged on $Computer"

If you are querying by user "resultset size" will be of no use.
You also have functions that are never used and the body code doe snot look for users.
Here is what you scrip looks like if printed well. It is just a jumble of pasted together and unrelated items.
## Find out what computers a user is logged into on your domain by running the script
## and entering in the requested logon id for the user.
## This script requires the free Quest ActiveRoles Management Shell for Active Directory
## snapin http://www.quest.com/powershell/activeroles-server.aspx
Add-PSSnapin Quest.ActiveRoles.ADManagement -ErrorAction SilentlyContinue
$ErrorActionPreference = "SilentlyContinue"
# Retrieve Username to search for, error checks to make sure the username
# is not blank and that it exists in Active Directory
Function Get-Username {
$Global:Username = Read-Host "Enter username you want to search for"
if ($Username -eq $null) {
Write-Host "Username cannot be blank, please re-enter username!!!!!"
Get-Username
$UserCheck = Get-QADUser -SamAccountName $Username
if ($UserCheck -eq $null) {
Write-Host "Invalid username, please verify this is the logon id for the account"
Get-Username
get-username resultsize unlimited
$computers = Get-QADComputer | where { $_.accountisdisabled -eq $false }
foreach ($comp in $computers) {
$Computer = $comp.Name
$ping = new-object System.Net.NetworkInformation.Ping
$Reply = $null
$Reply = $ping.send($Computer)
if ($Reply.status -like 'Success') {
#Get explorer.exe processes
$proc = gwmi win32_process -computer $Computer -Filter "Name = 'explorer.exe'"
#Search collection of processes for username
ForEach ($p in $proc) {
$temp = ($p.GetOwner()).User
if ($temp -eq $Username) {
write-host "$Username is logged on $Computer"
I suggest finding the original code then use the learning link at the top of this page to help you understand how it works in Powershell.
¯\_(ツ)_/¯

Simple script that will export the coordinates (layer bounds - top left x,y)

Hi,
I'm looking for a simple script that will export the coordinates (layer bounds - top left x,y) of the layers to an seperate xml/txt file.

Your screen capture looks like it's from Photoshop.
In InDesign sub layers are page items, the containing layer has no dimension. So you could get all the page item's x, y, width, height. But you might have to consider groups and then the layering could be very complex. The stacking order could also get complex. Page items have an index, but it's relative to its parent container.

In need of a script that will update tv shows on external hard-drive

Hi everyone I have a really specific question about scripts. Okay, so my dad regularly downloads various TV shows and movies etc
and I have a neighbor named Darian who once a week gives me an external hard drive and I update a whole bunch of TV shows. Now my problem is that each time he gives me the hard drive, it takes me about 20-30 mins to update all of the TV shows because they
are in different TV show folders, I was wondering if it is possible to make a script that when run would automatically copy all of the shows onto Darian's hard drive and then all I have to do is copy the movies which is pretty quick, here's another problem,
all of the movies and tv shows are not on my computer but on my dad's computer, so when I copy the stuff I have to access his pc through the network and I always have to type his username and password to access his pc, so if someone could tell me if it is
possible, the code I need and how to run it or pretty much any help, I would be very gratful, thanks in advance (:

The best we can do is point you at the resource page and let you figure out what it is you are trying to ask:
http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
Rather than ask a whole shopping list of questions rey to figure out the first step that you need to take and ask a question about that..
I also believe that it would be good for you to get a book on how to use Windows in a home network. All of what you ask can be done without any scripts. It is all part of basic WIndows and is designed to make this possible and easy for home users
but you stil need to study how the system works.
¯\_(ツ)_/¯

Trying to set up AV server on mini late 2012. Will upgrade to Yosemite tomorrow. Home Internewt is ATT Sierra mobile hotspot only. So I think I need a wifi router that will tether the hotspot as sole internet source. Recommendation for system set

My system: Mac Mini late 2012 w/ 1 TB disk and *GB memory (for AV server), iPad air 2 w/ 64 GB, iPad, iPad 2, iPhone 6, iPhone 4, Macbook running Yosemite, older Macboo w/ 2GB memory & 160 GB hard drive, 1 TB back up drive, WiFi Printer
Internet: Wireless hotspot ATT 4G LTE limited to 5 GB/mo (no cable or DSL available. Router to be determined
AV equip: Vizio smart TV (WiFi capable & network cable), high end analog audio, DAC, Samsung TV/display w/ HDMI.
Looking for a router recommendation that will utilize my ATT device and stream music (and of course less demanding DATA)
What is/are recommended connection(s) between devices? Hardwire Mini to main TV w/ HDMI, network or USB? Help?

Another way to set things up, use an Apple Airport Extreme Basestation.
My system setup has a cable modem directly connected to the AEBS.
The AEBS is then setup to do all of the network management, I use
both hardwired and WiFi access via the AEBS. It also has a USB port
that you can use for attaching HDDs for common data access and even
Time Machine backups.
FWIW, here's my system:
2011 MiniServer used as HTPC - hardwired ethernet to AEBS
2010 Mini used as server - hardwired ethernet to AEBS
(these are hardwired simply because of proximity to AEBS but could be WIFi connected)
Late 2013 27" iMac workstation- hardwired or WIFi depending on needs
Early 2011 Macbook Pro - WiFi connected
iPhone 5S - WiFi connected as needed
The 2010 Mini Server I use as my "iTunes hub" set up with Home Sharing and
by running Server on it, have Apple download caching of both Mac and iOS
apps, Time Machine backups and general backups for various content from
the different computers.

I want to build an apple script that will parse the name of a file and sort it into folders.

This is for medical application, so I will do it as such: CLIN_FAM_PAT_FILE_DATE.EXT sorts into Folders: Family/Patient/Type/Date, either sorting into folders that already exist (and make them shared folders eventually for each patient) or creating new folders with names as indicated by the file name. The Prefix "CLIN" is an indication that the file is a clincial patient document and so needs to be filed. Files without that prefix would be ignored.
So the file format would be:
Family Folder
Family DocumentsDocument Type folders
Patient folders - for each person who is a member of that houshold unitDocument Type Folders (such as x-rays, lab reports, or insurance info)Within each document type, there would be separate folders based on the date (or at least the order of the docs would be by date)
For example:   A document called CLIN_JONES123_JAMES228_LAB_022614.PDF which is a lab summary for James Jones done on 2/26/14 would go here
JONES123 FolderJAMES228 FolderLab Results FolderFebruary 2014 Folder.
Makes sense? I am initially putting these files into a Filemaker Pro database and having it compile the files based on patient name, type, date, etc. But need to use Applescript to create the folders so things are organized in a way that I can easily share with patients.
Makes sense?

You can call this script from Applescript (just need to do some escaping of quotes):
This can be run in Applescript:
do shell script "
DestinantionFolder=$HOME/Desktop
MONTHS=(January February March April May June July August September October November December)
for f in ~/Desktop/*
do
     if [[ $( echo \"${f##*/}\" | cut -d_ -f1 ) == \"CLIN\" ]] ; then
          ff=$( echo \"${f##*/}\" | cut -d_ -f2 )
          pd=$( echo \"${f##*/}\" | cut -d_ -f3 )
          date=$( echo \"${f##*/}\" | cut -d_ -f5 )
          date=${date%%.*}
          mo=${date:0:2}
          yr=20${date:4:2}
          Dir=$DestinantionFolder/$ff/$pd/${MONTHS[$mo-1]}\\ $yr/
          if [ ! -d \"$Dir\" ]; then
               mkdir -p \"$Dir\"
          fi
          mv \"$f\" \"$Dir\"
     fi
done"
...is there a way to trigger this whenever a new file is created to check and see if it needs to be moved
Yes, with Automator. When you Open Automator, choose Folder Action
I copied what you did and while the script ran successfully, I don't see any new folders created. Your shell script makes sense; I am not sure why it doesn't create folders.
The script as written only looks for files in the Desktop Folder
(edit by changing: DestinantionFolder=$HOME/Desktop )
To test I created a file on my Desktop
touch ~/Desktop/CLIN_JONES123_JAMES228_LAB_022614.PDF
and Folders were created and the file moved.
(Note: I only tested that format. If the file has any other format, it will fail)

Script that will show the character count of all carriage resturns

I have found a bug when exporting an indd to idml. If a a carriage return falls in a character count that is a multiple of 8000 + 1 it is converted to a paragraph separator (u2029). I am in the process of mass exporting around 3000 files to idml for a project. I am trying to come up with a way with a script to check the files to see if carriage returns exist in these locations. I am fairly new to scripting and don't know how this would be done. I know it is possible to get character counts but is it possible to check if a character exists in a certain character count from the beginning of a story? Any help on this would be appreciated.
Also has anyone else ran into this with exporting to idml? I have submitted a bug report. This is can be recreated across multiple computers, OS's and versions of InDesign.

@Blujely – about your initial question about showing a specific character at an n-th position in a story, you could use a simple GREP search in InDesign and restrict that search to a specific story (e.g. the story of a selected piece of text):
Search for the n-th position with the formular in dummy-syntax:
Positive look behind of any character in the exact length n-1 + character
E.g. if you want to look for a "carriage return", defined in GREP as \n at every 10th position, search for:
(?<=.{9})\n
In your case that would be:
(?<=.{8000})\n
Uwe

We need a script that will select clipping path for multiple images in indesign

this is what we have, but it's not working:
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
app.doScript(resetAllClippingPathsToActiveDoc, ScriptLanguage.JAVASCRIPT, [], UndoModes.ENTIRE_SCRIPT, "Reset all Clipping Paths of the Active Document");
function resetAllClippingPathsToActiveDoc(){
    var d=app.activeDocument;
    var allGraphicsInDoc = d.allGraphics;
    for(var n=0;n<allGraphicsInDoc.length;n++){
        if(allGraphicsInDoc[n].hasOwnProperty("clippingPath")){allGraphicsInDoc[n].clippingPath.c lippingType = ClippingPathType.PHOTOSHOP_PATH};
            allGraphicsInDoc[n].clippingPath.appliedPathName = "Path 1";

this is what we have, but it's not working:
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
app.doScript(resetAllClippingPathsToActiveDoc, ScriptLanguage.JAVASCRIPT, [], UndoModes.ENTIRE_SCRIPT, "Reset all Clipping Paths of the Active Document");
function resetAllClippingPathsToActiveDoc(){
    var d=app.activeDocument;
    var allGraphicsInDoc = d.allGraphics;
    for(var n=0;n<allGraphicsInDoc.length;n++){
        if(allGraphicsInDoc[n].hasOwnProperty("clippingPath")){allGraphicsInDoc[n].clippingPath.c lippingType = ClippingPathType.PHOTOSHOP_PATH};
            allGraphicsInDoc[n].clippingPath.appliedPathName = "Path 1";

Script that will help validate if there is any data loss after a DB restore

Hi,
I need to write a single script that will perform the following
operations:
1)return me the highy accessed tables across all databases.
2)List the count, Min and Max system date of the highy accessed tables returned from step 1.
The idea is to validate if there is any data loss to the highly transactional tables after a database restore operation has been performed.
Thanks.

Hello,
I would also like you to see nice blog by Aron,you can modify the script a bit to change according to your need
http://sqlblog.com/blogs/aaron_bertrand/archive/2008/05/06/when-was-my-database-table-last-accessed.aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
Hello Shanky,
The post would not be helpful too much for OP's requirement. The post was talking about when was the database last accessed. DMLs are not capturing in the script and also there will be many variant forms that can be applied for DML. Hence, I do not think,
the script would help too much.
Or Am I missing something?
Latheesh as i mentioed OP has to modify the script little bit may be add User_seek,user_update,user_scans.Still IMO there is no *perfect* way to actually analyze this.So I pointed out point in my original post.Also unless he has some timestamp he cannot
see min time when it was accessed ,max time can be taken from last user seek,scan,lookup time. Motive was to lethim know what he was trying to achieve cannot be axactly obtained by using sys.dm_index_usage_stats.Below query will give most accessed table
: Source (Query)
SELECT
t.name AS 'Table',
SUM(i.user_seeks + i.user_scans + i.user_lookups)
AS 'Total accesses',
SUM(i.user_seeks) AS 'Seeks',
SUM(i.user_scans) AS 'Scans',
SUM(i.user_lookups) AS 'Lookups'
FROM
sys.dm_db_index_usage_stats i RIGHT OUTER JOIN
sys.tables t ON (t.object_id = i.object_id)
GROUP BY
i.object_id,
t.name
ORDER BY [Total accesses] DESC
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Looking for a Powershell Script which can put the scom servers in maintenance mode

Looking for a Powershell Script which can put the scom servers in maintenance mode so that SCOM should not send an alert during planned task.
Rahul

1. Provide list of servers line-by-line in C:\ServerList.txt, make sure you provide limited no. of servers, do not exceed 20 - 25 per batch
2. Save the script with suitable name (test.ps1)
3. Open PowerShell cmd prompt
4. Script accepts 3 params - TimeInMinutes, Reason and Comment
**** Please note, this script will work for SCOM 2012 R2
param([int32]$TimeMin, [string]$Reason, [string]$Comment)
try
$api = new-object -comObject 'MOM.ScriptAPI'
Import-Module operationsmanager
New-SCOMManagementGroupConnection
$Servers = Get-Content "C:\ServerList.txt"
$Time = (Get-Date).Addminutes($TimeMin)
Foreach ($Server in $Servers)
#Get Computer instance
$ComputerClass = Get-SCOMClass -Name Microsoft.Windows.Computer
$ComputerClassInstance = Get-SCOMClassInstance -Class $ComputerClass | Where {$_.DisplayName -eq $Server}
If ($ComputerClassInstance -ne $Null)
$HealthServiceWatcherClass = Get-SCOMClass -name:Microsoft.SystemCenter.HealthServiceWatcher
#Get Health Service Watcher Class instance of the server
$HSWClass = Get-SCOMClass -Name Microsoft.SystemCenter.HealthServiceWatcher
$HSWClassIns = Get-SCOMClassInstance -Class $HSWClass | Where {$_.DisplayName -eq $Server}
#Starting the maintenance mode
Start-SCOMMaintenanceMode -Instance $HSWClassIns -EndTime $Time -Reason $Reason -Comment $Comment
Start-SCOMMaintenanceMode -Instance $ComputerClassInstance -EndTime $Time -Reason $Reason -Comment $Comment
Write-Host "Health Service Watcher and Agent server "$Server " kept in maintenance mode" -foregroundcolor "green"
$api.LogScriptEvent('MaintenanceModeScript.ps1', 200, 0, "$Server kept in maintenance mode for $TimeMin minutes")
Else
Write-Host $Server" not found " -foregroundcolor "red"
$api.LogScriptEvent('MaintenanceModeScript.ps1', 201, 1, "$Server could not be found in domain")
Catch [system.exception]
$api.LogScriptEvent('MaintenanceModeScript.ps1', 201, 1, $_.Exception.Message)
Faizan

[svn:fx-trunk] 16929: Add a [Mixin] class that will register the required class aliases in the event the mxml compiler generation   [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework .

Revision: 16929
Revision: 16929
Author:   [email protected]
Date:     2010-07-15 07:38:44 -0700 (Thu, 15 Jul 2010)
Log Message:
Add a class that will register the required class aliases in the event the mxml compiler generation [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework.
Add a reference to this class in the RPCClasses file so it always gets loaded.
QE notes: Need a remoting and messaging regression test that doesn't use Flex UI.
Bugs: Watson bug 2638788
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/RPCClasses.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/utils/RpcClassAliasInitializer.as

Great exercise to document the problem like this. It got me thinking about how an app with modules would be different from an app that does not use modules. Solution: I moved the dummy reference of PersonPhotoView out to the main application file (as opposed to being inside the module) and it worked. I've probably been lucky not to have experienced this problem earlier, because for most other entities I have an instance attached to my model which is linked / compiled with the main application.

Script that deletes all the data in the DB

Somebody has or know a script that delete all the data (but not the tables) of the database???? I have dummy data and know I need the tables clean of data.
How can I delete it???????? Thank you for you help
Javier

You could truncate all the tables with the following commandTRUNCATE TABLE <table_name>;This will delete all the data in the table while keeping the table structure, contraints, indexes, triggers, etc. intact so they wont have to be rebuilt. All foreign keys must be disabled to use the TRUNCATE command.

Is there an AppleScript or Automator Script that will wake a Mac from Sleep?

Is there an AppleScript or Automator Script that will wake a Mac from Sleep?

Frank and All,
The following answer to your question above is complicated, but I hope it explains why my question was formed with so much frustration in it.
I have an OpenOffice(OO) Macro that was launched with Calendar at 6pm each business night. It ran properly in all Apples operating systems until I Hit Maverick(OSX10.9). From then on, the AppleScript would run from one to 3 days, then would disappear from the Calendar entry. The Calendar alert would still run, but the "OpenFile" section of the alert would disappear. I also was running elgato EyeTV HD during the day, so I would use energy saver to put my MacBook Pro to sleep at 12 Midnight and wake it again at 9am. I picked up a used Mac Mini to do the EyeTV stuff, provide AppleTV the files in H264 format through iTunes' media share, and found it had plenty of power to do the 6pm automated stuff simultaneously as well. Because I still wanted to run the OpenOffice Macro on my MacBook Pro at 6pm, and wanted to use it for a host of other things when I was on the road, I wanted it to sleep most of the time and only wake up automatically to run the 6pm OO Macro. When I called Apple about the issue I was having with Maverick and Calendar loosing the OpenFile command as part of the Alert Message, they told me the no longer supported answering AppleScript Questions but they now would support Automator questions. I pointed out that the OpenFile would also fail after one to three days if I used a Calendar Alert to launch an Automator App. At first, I did not like Automator, but now I see why Apple is pushing us to use it. Automator adds a TIME STAMP ID to the Apps developed in Automator so the first time you launch the App after a change to it, you must reply to a dialog message saying that this is the first time you are running this version of the App. If a Scammer has replaced your app with one that can reek havoc on your computer, the replacement app will not run unless you are there to agree that you know where the modified app came from and click the OK button to continue (BRILLIANT, Enhanced Security idea on Apples part). I also noticed that after Mountain Lion, the Applescript delay timing was all screwed up as well. Well I tried to use LaunchD Task Scheduler to circumvent the Calendar Problem and that worked until I upgraded to Yosemite Last week. Then LaunchD no longer worked and I am only into a few days of using The Calendar Launched Automator App to see if it will continue to run.
But I think I solved the dilemma I was having with opening an Automator App in a Sleeping Mac. I Googled up the following question, "AppleScript to wake up computer". I went thru several complex responses until I found this on that is INCREDIBLE EASEY! What came back was a brettterpstra.com response from Feb 20th,2014. What it said, in a Quick Tip: caffeinated your Terminal Article, if you wanted to wake a Mac from sleep, use the Terminal command named "Caffeine -u -t 1". I placed it in an Automator Most Used Action called "Run Shell Script -- Caffeine -u -t 1" and it worked! Now, I can put my Mac to Sleep but at 6pm, the Automator App will launch, run the "Caffeine -u- -t 1" command and proceed to work as if I had awakened the Mac From Sleep mode by pressing a keyboard key and had run the Automator Script with a double click.
Sorry for the long, drawn-out reply, but maybe this will help others.

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

You don't need an application, just plug a compaitble monitor into the display port of your MacBook Pro, set the screen up in System Preferences>Displays

Need a powershell script that will modify the path of an existing Outlook 2010 OST file

Similar Messages

Maybe you are looking for