Need design suggestion(s)

I have a C++ server running (as a service) under Windows, and Tomcat is running on the same box. I want to use Java to publish the stats of the server so people can hit the Tomcat server from a browser anywhere and see that the server is still alive and kicking. Basically, Inter-process Communication between a C++ service and a Tomcat/Java process.
What would be a good way to go here?
e.g.
I could have the C++ server use http to post data to a Java servlet but that seems like a bit of overkill?
It seems like a good application for JMS, but I'm not sure if there is a C++ interface out for it yet, and that may also be too heavy.
Other thoughts... named pipes, streaming the data through a file, RMI, etc...
Anybody had a good experience doing something like this?
Simple would be good here. :-)
TIA,
Nate

I have a truly inelegant idea, and it would depend how critical your "real-time" data was. Couldn't you just write the information to a file using C++ service, and display the data from the file when requested? You would have to consistently write state to the the file (maybe once a minute). As I said it's not elegant and probably not overly efficient, but it would be easy for almost anyone to code. OK, I'll be quiet now...

Similar Messages

I want to develop forex web site need design suggestion

i am a professional content writer currently writing for webdesignerhu - web design blog. i want to create a forex web site i am looking for design suggestions for that .
i have search alot on google , saw alot of templates but cannot figure it out.
i need some inspirations about forex websites, forex templates.
I am looking for +tive responce....

Hi Cathie,
What Brad explained above is that when you want to use the hosting and mail services provided by an external party e.g. Godaddy (not Business Catalysts) you need to create an A Record, using your hosting provider tools, that points to the data center where your site is located. Please find below the IPs for each data center:
54.252.148.183 or 54.252.148.191 for sites on the Australia data center
54.236.190.114 or 54.236.189.64 for sites on the United States data center
54.246.209.120 or 54.246.209.119 for sites on the European Union data center
So firstly you need to log in to the admin of your site and add the domain to use external hosting services - http://screencast.com/t/iV00iojmFfP
Then you need to create an A Record at your hosting provider that points to the IP shown in our DNS tool (as shown in the screenshot from above).
Please note that you need to create A Records for both @ and WWW records. For further assistance on this matter I suggest contacting your hosting provider as each one has their own workflow in terms of creating this records.
I hope this helps!
Andrei

Design Suggestion(s)

Hi all,
I was wondering if anyone has any design suggestions for the following.
I am making a simulation that permors 10000 turns (so it make 10000 calls to a function).
I have made a gui that contains a start and pause button in hopes that I can click on start to excute the 10000 calls, and click on pause to pause the program and keep the same iteration that it's on (ie if i start the program, run 100 turns, and then pause it, when I unpause it, I want it to continue where it left off).
My question is:
in order to do this should I make a thread once i click on the start button??
or should i avoid threads all together?
Any other ideas/suggestion would be much appreciated.
Thanks.
P.S. I don't need people to submit code (although i wouldn't object to it). You can just merely suggest ideas.

from what I understand about threads is this:
once you make a thread, it's like you are running a spereate program from the original one, that peroms a task, but then when it dies, all of its values are erased (ie the thread does not update the original programs values). Afterwards the original program has no means of getting these values unless the thread wrote them to a text file, etc..
am i incorrect? is there an easy way of doing it?

AC Plug (a.k.a. Duck Head) Design Suggestion

This is a design suggestion for apple's laptop power adapter. The current (2005) adapter design has a removable ac plug, a "duck head". The plug is removed when one wants to use a different country's plug type, or when the power cord extension is used. I often use the power cord extension, so I often remove the duck head. Recently, I lost the plug and cursed the duck head who designed it.
My suggestion is to put a female powercord plug next to the duck head on the side of the adapter. This way, I'd be able to simply unplug the cord when I travel and never touch the duck head.

The other end (the side which plugs into the computer) needs improvement in my opinion. It could have been more user friendly if it had a 90 degree "L" shape so it wouldn't stick out straight. When used in lap (like it is intended for) if you spread your legs a bit, the weight of the computer is supported by the power plug. It may fail earlier than it's intended assuming the female part of the plug is directly mounted on the circuit board. My two cents...

Hello friends recently shifted from windows to mac need some suggestion on which software to go ahead with for editing, excel,power point presentation

Hello friends recently shifted from windows to mac need some suggestion on which software to go ahead with for creating word editing, excel,power point presentation.

Only Microsoft's Office for Mac 2011 14.4.8 will work on your Windows Office files in their native document format. Anything else, and particularly Apple's Pages, Numbers, and Keynote will perform translation on open, and export. This can, and will, introduce differences to your original documents, especially when sharing with others in the Windows Office 2010/2013 applications.
Here is my short list.
Office for Mac 2011 v14.4.8
LibreOffice (latest)
The current iterations of Apple's Pages, Numbers, and Keynote are not what I would term business/professional grade applications. Apple updates them infrequently, ignores user friendly features, omits others, and has introduced default backwards incompatibility between Yosemite and prior OS X releases of these applications. Read the reviews in the OS X App Store. Even for free with a recent Mac purchase, these products will transform your mood.
The free LibreOffice is aggressively developed and designed as an MS Office replacement suite. There are occasions where it can open documents that Office for Mac, and Apple's products ignore. Extensive PDF manuals for the individual applications. Unlike Word, you can have two-up page viewing with a button click, or edit multi-page PDF. There is a forms designer. It can open nearly any document including MS Publisher and Visio documents from the Windows space. I use it.
MS Office 2015 Preview for Yosemite is available, but as its title would suggest, it is not done yet, and some features are missing. I created a single-page Word document with a DRAFT watermark. Only LibreOffice v4.4.1 was able to open this document and preserve the watermark.

Need a suggestion for change in cv02n tcode

Hi all,
Need a suggestion to update the additional tab / classification in cv02n transaction.
I want to update the charecterstics(custom) in the additional tab(and also in classification tab).
Thanks & regards
Pavan

Hi all,
Found solution

Query performance tuning need your suggestions

Hi,
Below is the sql query and explain plan which is taking 2 hours to execute and sometime it is breaking up( erroring out) due to memory issue.
Below it the query which i need to improve the performance of the code please need your suggestion in order to tweak so that time take for execution become less and also in less memory consumption
select a11.DATE_ID DATE_ID,
sum(a11.C_MEASURE) WJXBFS1,
count(a11.PKEY_GUID) WJXBFS2,
count(Case when a11.C_MEASURE <= 10 then a11.PKEY_GUID END) WJXBFS3,
count(Case when a11.STATUS = 'Y' and a11.C_MEASURE > 10 then a11.PKEY_GUID END) WJXBFS4,
count(Case when a11.STATUS = 'N' then a11.PKEY_GUID END) WJXBFS5,
sum(((a11.C_MEASURE ))) WJXBFS6,
a17.DESC_DATE_MM_DD_YYYY DESC_DATE_MM_DD_YYYY,
a11.DNS DNS,
a12.VVALUE VVALUE,
a12.VNAME VNAME,
a13.VVALUE VVALUE0,
a13.VNAME VNAME0,
9 a14.VVALUE VVALUE1,
a14.VNAME VNAME1,
a15.VVALUE VVALUE2,
a15.VNAME VNAME2,
a16.VVALUE VVALUE3,
a16.VNAME VNAME3,
a11.PKEY_GUID PKEY_GUID,
a11.UPKEY_GUID UPKEY_GUID,
a17.DAY_OF_WEEK DAY_OF_WEEK,
a17.D_WEEK D_WEEK,
a17.MNTH_ID DAY_OF_MONTH,
a17.YEAR_ID YEAR_ID,
a17.DESC_YEAR_FULL DESC_YEAR_FULL,
a17.WEEK_ID WEEK_ID,
a17.WEEK_OF_YEAR WEEK_OF_YEAR
from ACTIVITY_F a11
join (SELECT A.ORG as ORG,
A.DATE_ID as DATE_ID,
A.TIME_OF_DAY_ID as TIME_OF_DAY_ID,
A.DATE_HOUR_ID as DATE_HOUR_ID,
A.TASK as TASK,
A.PKEY_GUID as PKEY_GUID,
A.VNAME as VNAME,
A.VVALUE as VVALUE
FROM W_ORG_D A join W_PERSON_D B on
(A.TASK = B.TASK AND A.ORG = B.ID
AND A.VNAME = B.VNAME)
WHERE B.VARIABLE_OBJ = 1 ) a12
on (a11.PKEY_GUID = a12.PKEY_GUID and
a11.DATE_ID = a12.DATE_ID and
a11.ORG = a12.ORG)
join (SELECT A.ORG as ORG,
A.DATE_ID as DATE_ID,
A.TIME_OF_DAY_ID as TIME_OF_DAY_ID,
A.DATE_HOUR_ID as DATE_HOUR_ID,
A.TASK as TASK,
A.PKEY_GUID as PKEY_GUID,
A.VNAME as VNAME,
A.VVALUE as VVALUE
FROM W_ORG_D A join W_PERSON_D B on
(A.TASK = B.TASK AND A.ORG = B.ID
AND A.VNAME = B.VNAME)
WHERE B.VARIABLE_OBJ = 2) a13
on (a11.PKEY_GUID = a13.PKEY_GUID and
a11.DATE_ID = a13.DATE_ID and
a11.ORG = a13.ORG)
join (SELECT A.ORG as ORG,
A.DATE_ID as DATE_ID,
A.TIME_OF_DAY_ID as TIME_OF_DAY_ID,
A.DATE_HOUR_ID as DATE_HOUR_ID,
A.TASK as TASK,
A.PKEY_GUID as PKEY_GUID,
A.VNAME as VNAME,
A.VVALUE as VVALUE
FROM W_ORG_D A join W_PERSON_D B on
(A.TASK = B.TASK AND A.ORG = B.ID
AND A.VNAME = B.VNAME)
WHERE B.VARIABLE_OBJ = 3 ) a14
on (a11.PKEY_GUID = a14.PKEY_GUID and
a11.DATE_ID = a14.DATE_ID and
a11.ORG = a14.ORG)
join (SELECT A.ORG as ORG,
A.DATE_ID as DATE_ID,
A.TIME_OF_DAY_ID as TIME_OF_DAY_ID,
A.DATE_HOUR_ID as DATE_HOUR_ID,
A.TASK as TASK,
A.PKEY_GUID as PKEY_GUID,
A.VNAME as VNAME,
A.VVALUE as VVALUE
FROM W_ORG_D A join W_PERSON_D B on
(A.TASK = B.TASK AND A.ORG = B.ID
AND A.VNAME = B.VNAME)
WHERE B.VARIABLE_OBJ = 4) a15
on (a11.PKEY_GUID = a15.PKEY_GUID and
89 a11.DATE_ID = a15.DATE_ID and
a11.ORG = a15.ORG)
join (SELECT A.ORG as ORG,
A.DATE_ID as DATE_ID,
A.TIME_OF_DAY_ID as TIME_OF_DAY_ID,
A.DATE_HOUR_ID as DATE_HOUR_ID,
A.TASK as TASK,
A.PKEY_GUID as PKEY_GUID,
A.VNAME as VNAME,
A.VVALUE as VVALUE
FROM W_ORG_D A join W_PERSON_D B on
(A.TASK = B.TASK AND A.ORG = B.ID
AND A.VNAME = B.VNAME)
WHERE B.VARIABLE_OBJ = 9) a16
on (a11.PKEY_GUID = a16.PKEY_GUID and
a11.DATE_ID = a16.DATE_ID and
A11.ORG = A16.ORG)
join W_DATE_D a17
ON (A11.DATE_ID = A17.ID)
join W_SALES_D a18
on (a11.TASK = a18.ID)
where (a17.TIMSTAMP between To_Date('2001-02-24 00:00:00', 'YYYY-MM-DD HH24:MI:SS') and To_Date('2002-09-12 00:00:00', 'YYYY-MM-DD HH24:MI:SS')
and a11.ORG in (12)
and a18.SRC_TASK = 'AX012Z')
group by a11.DATE_ID,
a17.DESC_DATE_MM_DD_YYYY,
a11.DNS,
a12.VVALUE,
a12.VNAME,
a13.VVALUE,
a13.VNAME,
a14.VVALUE,
a14.VNAME,
a15.VVALUE,
a15.VNAME,
a16.VVALUE,
a16.VNAME,
a11.PKEY_GUID,
a11.UPKEY_GUID,
a17.DAY_OF_WEEK,
a17.D_WEEK,
a17.MNTH_ID,
a17.YEAR_ID,
a17.DESC_YEAR_FULL,
a17.WEEK_ID,
a17.WEEK_OF_YEAR;
Explained.
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 1245 | 47 (9)| 00:00:01 |
| 1 | HASH GROUP BY | | 1 | 1245 | 47 (9)| 00:00:01 |
|* 2 | HASH JOIN | | 1 | 1245 | 46 (7)| 00:00:01 |
|* 3 | HASH JOIN | | 1 | 1179 | 41 (5)| 00:00:01 |
|* 4 | HASH JOIN | | 1 | 1113 | 37 (6)| 00:00:01 |
|* 5 | HASH JOIN | | 1 | 1047 | 32 (4)| 00:00:01 |
|* 6 | HASH JOIN | | 1 | 981 | 28 (4)| 00:00:01 |
| 7 | NESTED LOOPS | | 1 | 915 | 23 (0)| 00:00:01 |
| 8 | NESTED LOOPS | | 1 | 763 | 20 (0)| 00:00:01 |
| 9 | NESTED LOOPS | | 1 | 611 | 17 (0)| 00:00:01 |
| 10 | NESTED LOOPS | | 1 | 459 | 14 (0)| 00:00:01 |
| 11 | NESTED LOOPS | | 1 | 307 | 11 (0)| 00:00:01 |
| 12 | NESTED LOOPS | | 1 | 155 | 7 (0)| 00:00:01 |
| 13 | NESTED LOOPS | | 1 | 72 | 3 (0)| 00:00:01 |
| 14 | TABLE ACCESS BY INDEX ROWID| W_SALES_D | 1 | 13 | 2 (0)| 00:00:01 |
|* 15 | INDEX UNIQUE SCAN | CONS_UNQ_W_SALES_D_SRC_ID | 1 | | 1 (0)| 00:00:01 |
| 16 | TABLE ACCESS BY INDEX ROWID| W_DATE_D | 1 | 59 | 1 (0)| 00:00:01 |
|* 17 | INDEX UNIQUE SCAN | UIDX_DD_TIMSTAMP | 1 | | 0 (0)| 00:00:01 |
| 18 | TABLE ACCESS BY INDEX ROWID | ACTIVITY_F | 1 | 83 | 4 (0)| 00:00:01 |
|* 19 | INDEX RANGE SCAN | PK_ACTIVITY_F | 1 | | 3 (0)| 00:00:01 |
|* 20 | TABLE ACCESS BY INDEX ROWID | W_ORG_D      | 1 | 152 | 4 (0)| 00:00:01 |
|* 21 | INDEX RANGE SCAN | IDX_FK_CVSF_PKEY_GUID | 10 | | 3 (0)| 00:00:01 |
|* 22 | TABLE ACCESS BY INDEX ROWID | W_ORG_D | 1 | 152 | 3 (0)| 00:00:01 |
|* 23 | INDEX RANGE SCAN | IDX_FK_CVSF_PKEY_GUID | 10 | | 3 (0)| 00:00:01 |
|* 24 | TABLE ACCESS BY INDEX ROWID | W_ORG_D | 1 | 152 | 3 (0)| 00:00:01 |
|* 25 | INDEX RANGE SCAN | IDX_FK_CVSF_PKEY_GUID | 10 | | 3 (0)| 00:00:01 |
|* 26 | TABLE ACCESS BY INDEX ROWID | W_ORG_D | 1 | 152 | 3 (0)| 00:00:01 |
|* 27 | INDEX RANGE SCAN | IDX_FK_CVSF_PKEY_GUID | 10 | | 3 (0)| 00:00:01 |
|* 28 | TABLE ACCESS BY INDEX ROWID | W_ORG_D | 1 | 152 | 3 (0)| 00:00:01 |
|* 29 | INDEX RANGE SCAN | IDX_FK_CVSF_PKEY_GUID | 10 | | 3 (0)| 00:00:01 |
|* 30 | TABLE ACCESS FULL | W_PERSON_D | 1 | 66 | 4 (0)| 00:00:01 |
|* 31 | TABLE ACCESS FULL | W_PERSON_D | 1 | 66 | 4 (0)| 00:00:01 |
|* 32 | TABLE ACCESS FULL | W_PERSON_D | 1 | 66 | 4 (0)| 00:00:01 |
|* 33 | TABLE ACCESS FULL | W_PERSON_D | 1 | 66 | 4 (0)| 00:00:01 |
|* 34 | TABLE ACCESS FULL | W_PERSON_D | 1 | 66 | 4 (0)| 00:00:01 |
-----------------------------------------------------------------------------------------------------------------------

Hi,
I'm not a tuning expert but I can suggest you to post your request according to this template:
Thread: HOW TO: Post a SQL statement tuning request - template posting
HOW TO: Post a SQL statement tuning request - template posting
Then:
a) you should posting a code which is easy to read. What about formatting? Your code had to be fixed in a couple of lines.
b) You could simplify your code using the with statement. This has nothing to do with the tuning but it will help the readability of the query.
Check it below:
WITH tab1 AS (SELECT a.org AS org
                   , a.date_id AS date_id
                   , a.time_of_day_id AS time_of_day_id
                   , a.date_hour_id AS date_hour_id
                   , a.task AS task
                   , a.pkey_guid AS pkey_guid
                   , a.vname AS vname
                   , a.vvalue AS vvalue
                   , b.variable_obj
                FROM    w_org_d a
                     JOIN
                        w_person_d b
                     ON (    a.task = b.task
                         AND a.org = b.id
                         AND a.vname = b.vname))
SELECT a11.date_id date_id
       , SUM (a11.c_measure) wjxbfs1
       , COUNT (a11.pkey_guid) wjxbfs2
       , COUNT (CASE WHEN a11.c_measure <= 10 THEN a11.pkey_guid END) wjxbfs3
       , COUNT (CASE WHEN a11.status = 'Y' AND a11.c_measure > 10 THEN a11.pkey_guid END) wjxbfs4
       , COUNT (CASE WHEN a11.status = 'N' THEN a11.pkey_guid END) wjxbfs5
       , SUM ( ( (a11.c_measure))) wjxbfs6
       , a17.desc_date_mm_dd_yyyy desc_date_mm_dd_yyyy
       , a11.dns dns
       , a12.vvalue vvalue
       , a12.vname vname
       , a13.vvalue vvalue0
       , a13.vname vname0
       , a14.vvalue vvalue1
       , a14.vname vname1
       , a15.vvalue vvalue2
       , a15.vname vname2
       , a16.vvalue vvalue3
       , a16.vname vname3
       , a11.pkey_guid pkey_guid
       , a11.upkey_guid upkey_guid
       , a17.day_of_week day_of_week
       , a17.d_week d_week
       , a17.mnth_id day_of_month
       , a17.year_id year_id
       , a17.desc_year_full desc_year_full
       , a17.week_id week_id
       , a17.week_of_year week_of_year
    FROM activity_f a11
         JOIN tab1 a12
            ON (    a11.pkey_guid = a12.pkey_guid
                AND a11.date_id = a12.date_id
                AND a11.org = a12.org
                AND a12.variable_obj = 1)
         JOIN tab1 a13
            ON (    a11.pkey_guid = a13.pkey_guid
                AND a11.date_id = a13.date_id
                AND a11.org = a13.org
                AND a13.variable_obj = 2)
         JOIN tab1 a14
            ON (    a11.pkey_guid = a14.pkey_guid
                AND a11.date_id = a14.date_id
                AND a11.org = a14.org
                AND a14.variable_obj = 3)
         JOIN tab1 a15
            ON (    a11.pkey_guid = a15.pkey_guid
                AND a11.date_id = a15.date_id
                AND a11.org = a15.org
                AND a15.variable_obj = 4)
         JOIN tab1 a16
            ON (    a11.pkey_guid = a16.pkey_guid
                AND a11.date_id = a16.date_id
                AND a11.org = a16.org
                AND a16.variable_obj = 9)
         JOIN w_date_d a17
            ON (a11.date_id = a17.id)
         JOIN w_sales_d a18
            ON (a11.task = a18.id)
   WHERE (a17.timstamp BETWEEN TO_DATE ('2001-02-24 00:00:00', 'YYYY-MM-DD HH24:MI:SS')
                           AND TO_DATE ('2002-09-12 00:00:00', 'YYYY-MM-DD HH24:MI:SS')
          AND a11.org IN (12)
          AND a18.src_task = 'AX012Z')
GROUP BY a11.date_id, a17.desc_date_mm_dd_yyyy, a11.dns, a12.vvalue
       , a12.vname, a13.vvalue, a13.vname, a14.vvalue
       , a14.vname, a15.vvalue, a15.vname, a16.vvalue
       , a16.vname, a11.pkey_guid, a11.upkey_guid, a17.day_of_week
       , a17.d_week, a17.mnth_id, a17.year_id, a17.desc_year_full
       , a17.week_id, a17.week_of_year;
{code}
I hope I did not miss anything while reformatting the code. I could not test it not having the proper tables.
As I said before I'm not a tuning expert nor I pretend to be but I see this:
1) Table W_PERSON_D is read in full scan. Any possibility of using indexes?
2) Tables W_SALES_D, W_DATE_D, ACTIVITY_F and W_ORG_D have TABLE ACCESS BY INDEX ROWID which definitely is not fast.
You should provide additional information for tuning your query checking the post I mentioned previously.
Regards.
Al

Tune the SQL Query need a Suggestion

Hi,
There is a view created which takes 17seconds to execute the query, When i split the query and execute each query takes .15 seconds to execute. Below it the query which i need to improve the performance of the code please need your suggestion in order to tweek so that time take for execution become less
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_1 "Product Name",
TRIM (UPPER (serial_number_1)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_1 != 'NULL'
AND Serial_Number_1 != 'NULL'
AND C.Amid = A.Amid(+)
UNION
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_2 "Product Name",
TRIM (UPPER (serial_number_2)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_2 != 'NULL'
AND serial_number_2 != 'NULL'
AND C.Amid = A.Amid(+)
UNION
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_3 "Product Name",
TRIM (UPPER (serial_number_3)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_3 != 'NULL'
AND serial_number_3 != 'NULL'
AND C.Amid = A.Amid(+)
UNION
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_4 "Product Name",
TRIM (UPPER (serial_number_4)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_4 != 'NULL'
AND serial_number_4 != 'NULL'
AND C.Amid = A.Amid(+)
UNION
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_5 "Product Name",
TRIM (UPPER (serial_number_5)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_5 != 'NULL'
AND serial_number_5 != 'NULL'
AND C.Amid = A.Amid(+)
UNION
SELECT 'ERP' "Source",
Imv.Bill_To "Distibutor",
Imv.Ship_To "Reseller",
Ship_To_City "Reseller City",
Ship_To_State "Reseller State",
Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'COUNTRY') "Reseller Country",
Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'THEATER') "Reseller Theater",
Cl.Company_Name "Customer Name",
Cl.City "Customer City",
Cl.State "Customer State",
Edb2_Global.Country_Name_Theater(Cl.Country,'COUNTRY') "Customer Country",
Edb2_Global.Country_Name_Theater(Cl.Country,'THEATER') "Customer Theater",
Imv.So_Booked_Date "Sales Book Date",
Imv.Ship_Date "Ship Date",
Imv.Order_Number "Sales Order Number",
Imv.Cust_Po_Number "PO Number",
Cp.Item_Name "Product Name",
Cp.Product_Serial_Number "Product Serial Number",
TO_CHAR(Imv.contract_number)"Contract ID",
Imv.Service_Description "Support Name",
Imv.Service_Start_Date "Start Date",
Imv.Service_End_Date "Expire Date",
Imv.Header_Status "Header Status",
Imv.Line_Status "Line Status",
Imv.Line_Type "Line Type",
Imv.Termination_Reason "Termination Reason",
Cl.Location_Id "Location_id",
cp.id "Product_id"
FROM ib_support_contracts_mv imv,
customer_products cp,
customer_locations cl
WHERE Upper (Trim (Imv.Serial_Number)) = Upper (Trim (Cp.Product_Serial_Number(+)))
AND Cp.Location_Id = Cl.Location_Id(+)
There is a union for each and every query, Please suggest how to tweek
Thanks
Sudhir

Try
select distinct a.*
from (SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_1 "Product Name",
TRIM (UPPER (serial_number_1)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_1 != 'NULL'
AND Serial_Number_1 != 'NULL'
AND C.Amid = A.Amid(+)
union all
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_2 "Product Name",
TRIM (UPPER (serial_number_2)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_2 != 'NULL'
AND serial_number_2 != 'NULL'
AND C.Amid = A.Amid(+)
union all
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_3 "Product Name",
TRIM (UPPER (serial_number_3)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_3 != 'NULL'
AND serial_number_3 != 'NULL'
AND C.Amid = A.Amid(+)
union all
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_4 "Product Name",
TRIM (UPPER (serial_number_4)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_4 != 'NULL'
AND serial_number_4 != 'NULL'
AND C.Amid = A.Amid(+)
union all
SELECT 'Parature' "Source",
NULL "Distibutor",
reseller_name "Reseller",
NULL "Reseller City",
NULL "Reseller State",
A.Country "Reseller Country",
DECODE (a.state, 'APAC', 'APAC', 'EMEA', 'EMEA', NULL, 'Unknown', 'US' ) "Reseller Theater",
NULL "Customer Name",
NULL "Customer City",
NULL "Customer State",
NULL "Customer Country",
NULL "Customer Theater",
NULL "Sales Book Date",
NULL "Ship Date",
c.sales_order_number "Sales Order Number",
C.Po_Number "PO Number",
controller_model_number_5 "Product Name",
TRIM (UPPER (serial_number_5)) "Product Serial Number",
c.contract_id "Contract ID",
product_name "Support Name",
TO_DATE (c.contract_purchase_date) "Start Date",
TO_DATE (c.contract_expiration_date) "Expire Date",
NULL "Header Status",
NULL "Line Status",
NULL "Line Type",
NULL "Termination Reason",
NULL "Location_id",
NULL "Product_id"
FROM edb_assets c,
edb_accounts a
WHERE controller_model_number_5 != 'NULL'
AND serial_number_5 != 'NULL'
AND C.Amid = A.Amid(+)
union all
SELECT 'ERP' "Source",
Imv.Bill_To "Distibutor",
Imv.Ship_To "Reseller",
Ship_To_City "Reseller City",
Ship_To_State "Reseller State",
Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'COUNTRY') "Reseller Country",
Edb2_Global.Country_Name_Theater(Imv.Ship_To_Country ,'THEATER') "Reseller Theater",
Cl.Company_Name "Customer Name",
Cl.City "Customer City",
Cl.State "Customer State",
Edb2_Global.Country_Name_Theater(Cl.Country,'COUNTRY') "Customer Country",
Edb2_Global.Country_Name_Theater(Cl.Country,'THEATER') "Customer Theater",
Imv.So_Booked_Date "Sales Book Date",
Imv.Ship_Date "Ship Date",
Imv.Order_Number "Sales Order Number",
Imv.Cust_Po_Number "PO Number",
Cp.Item_Name "Product Name",
Cp.Product_Serial_Number "Product Serial Number",
TO_CHAR(Imv.contract_number)"Contract ID",
Imv.Service_Description "Support Name",
Imv.Service_Start_Date "Start Date",
Imv.Service_End_Date "Expire Date",
Imv.Header_Status "Header Status",
Imv.Line_Status "Line Status",
Imv.Line_Type "Line Type",
Imv.Termination_Reason "Termination Reason",
Cl.Location_Id "Location_id",
cp.id "Product_id"
FROM ib_support_contracts_mv imv,
customer_products cp,
customer_locations cl
WHERE Upper (Trim (Imv.Serial_Number)) = Upper (Trim (Cp.Product_Serial_Number(+)))
AND Cp.Location_Id = Cl.Location_Id(+)) a
Edited by: HuaMin on May 9, 2012 2:58 PM

Need a suggestion about Hierarchy ...

Hi All,
Greeting.
I have a requirement to change Hierarchy dynamically.
e.g. Cost Center Hierarchy
Node 1 ==> Level 1
Node 1.2 ==> Level 2
Node 1.3 ==> Level 3
CC 100001
Node 2 ==> Level 1
Node 2.2 ==> Level 2
CC 100002
Requirement:
1. Add CC 100002 under Node 1.2
2. Delete Node 2.2
My Question is whether there is Interface that user can play with hierarchy so user can add/delete the node.
Perhaps, the interface can be in ABAP program / Javascript / etc.
My Idea is like this:
1. I download the Hierarchy, with that Interface I can play with the Hierarchy.
2. Using that Hierarchy, I can generate some CSV file, than I upload the Hierarchy using the flat-file.
3. But before I upload it, I erase the Hierarchy first.
But now, I'm still confuse with what the Interface it, that can make user play with the Hierarchy.
Really need your suggestion ..
Thanks a lot all and have a good day,
Best regards,
Daniel N.

Either use java.net.URLConnection or Jakarta's HttpClient. Either way, you will need to familiarize yourself with Java's I/O package java.io. In particular, you will want to see how java.io.InputStream works. There are extensive I/O tutorials on this site and the Net in general.
- Saish

WM to be streamlined - Need Expert Suggestions

Hi experts,
I need your suggestions on the below scenario.
I have been handovered with responsiblity to streamline the WMS system by resloving issue and fixing the gaps.
Problem is Client was not using WMS sytem from last 9 months and it is still connected to MM.
Hence everyday corresponding WM docuements are generated relevant to MM and other process which is still in open status.
Now i am in dilemma how to tackle this situation !
I have the below plan :
1.Resolving and closing all existing issues in production server.
2.Stock correction in IM and WM
3.Identifying and fixing the gaps
But what if i found that the existing process conifured in SAP doesn't need the business requirement ? And need to implement again ?
Believe me that any help on this will be highly appreciated.
Thanks in advance.

Hi Manish,
Thanks a lot for sharing your views on this plan.
I found some congigurations changes to be done.
So my plan is to first resolve the productions issues and then disconnect WM from IM.
2) They were not using WM but WM was still active as per SAP WM, for any movement system create TO without TO confirmation you can not post a delivery. How are they managing today if there is some alternate way they can move back to the same. Try to understand that ?
Ans)They were able to issue the stock by using allow negative stock functionality
But now the major challenge is to clear the negative stock from interim storage types(911,914,921,922)
So is there any short cut method to clear this negative stocks lying in interim storage types as now i am doing it manually but there are thousands of -ve stock entries.
It is getting horrible to clear those bulk -ve entries !
Thank you..

Hi need good suggestion for future

hi experts,
i need good suggestion for my future _
i have 3 + exp as a ABAP consultant,
i am looking for a change, i wish to add some thing to ABAP? but, i couldn't understand what to do? pls help me in this regard..
my skills are : very good in ABAP
vey weak in OOPS.
waiting for good advice
thanks in advance

the future will depends on the OOPS only . for all the companies started working on OOPS only they are upgrading to the oops from the general abap...be aware of that ..
it is better to learn XI or HRABAP it is good for you i think.

Need 3 suggestions on upgrading a G3 to Panther

I'm upgrading my mothers old G3 350mhz iMac to Panther. I need 3 suggestions please. Please keep in mind that she does basic things like Mail & Browse the net - nothing intensive.
1) She has 192 megs of ram. I'm I correct to assume it has 2 slots and probably one has 64 and a 128 ram chip in it. I'm guessing I could ditch the 64 chip and add a 256 or 512 in that slot and it would suffice for her needs?
2) She'll need a larger internal HD. I like Seagate. What type of HD does this take? I ordered from Egghead.com last time and was pleased, could someone please tell me which Seagates (either an 80 gig or larger) that they sell that would suffice for her. By the way, what's the max. HD it can take (like my cube, 125 gigs?)
3) Anyone that has a reputable link to a vendor that can sell me a copy of OS X Panther would be much appreciated.
By the way, she was hoping I could pull this off for around $150, but I'm wondering if it will take more like $200.

Newegg.com is exactly where I just ordered a new HD for it. In fact, I ordered the same exact HD for it that I put in my Cube a month ago, which is a 120 gig Seagate (hope it worx & is compatible). I was going to get an 80 gig, but for just 12$ more I got the 120 gig so it seemed like a no brainer. I'm guessing this iMac also has the 125 gig limitation as the cube, so I didn't go beyond 120 gigs.
Ordered 512 megs of ram from OWC and also I ordered the retail Panther CD's from OWC. Panther cost a little more than the ram, but after racking my brain on eBay looking at the Panther computer specific cd's (for example, Panther for eMac, Panther for Powerbook, etc...) I just decided to get the Universal CD which should be guaranteed to work. OWC also guarantees it for 90 days, so I feel confident about the purchase.
The idea of buying a $30 iMac 400mhz firewire motherboard off of eBay has intrigued me, but at this point I don't want to do that much surgery on the unit - that can be a future upgrade if needed.
Mom will be mostly using Safari, Mail, and dabbling with digital photos from time to time (just saving them and viewing them, no intensive post processing). I think these upgrades will suffice her for atleast 2 more years (I hope).
My one concern is that she is using Netflix now and asked me if she'll be able to preview the Media Player movie trailers there (she can't now as her media player for os 9.1 just doesn't seem to play many of the trailers). I'm concerned here because I read where media player 9's recommended speed is somewhere in the range of a 450mhz G3. Anyone know if it will still work at 350mhz speed with the upgrades I'll be making?

Why we need Design Repository and Runtime repository seperately?

Hi All,
Anybody please tell me why we need design time repository and runtime repository seperately? And also I want to know the total OWB Architecture.
Thanks,
Siv
Edited by: Siv on Feb 10, 2010 10:40 PM

Hi Siv:
Concerning Repository:
Since OWB 10.2 there is only one Repository storing Design and Runtime-Components.
excerpt from http://download.oracle.com/docs/cd/E10926_01/doc/owb.101/b12146/over.htm (OWB 10.1.):
The Design Repository, installed in an Oracle database, stores the metadata definitions for all of the objects used in Warehouse Builder. This is where all of the design information is stored for the target systems you are creating. You can access metadata stored here using the client user-interface, or through OMB Plus, the Warehouse Builder scripting utility.
The runtime repository, installed in an Oracle database, stores all of the deployment data as well as data from executed mappings and process flows. This is where the target environment information is stored for the business intelligence systems you create. This includes connection information for all of the deployment locations.
Which version of OWB are you using?
Greetings
Guenther Herzog

Need some suggestion on bapi

Hello,
I am not able to pass multiple values for single import parameter..i tired calling function module in loop and also tried RANGES..Need some suggestion on this..
Thanks and Regards,
sapdev86
Moderator Message: Basic Question
Edited by: kishan P on Oct 14, 2010 11:46 AM

Hi,
BAPI is nothing but a function module and also RFC enabled. So u can call that fm from outside SAP. U can call that BAPI using some logic or u can make hardcoding the parameters, its depends mainly on ur requirement.
Regards
Amitava

Need serious Suggestion and Help

Well,
Hi to all this is my first post so expecting correct reply to my prob actuallly in this programming era i want to get certified in java and ORACLE but first concentrating on java so first of all i need how to start up guide and finish by certification can any body provide me the clear info how to get started how to go as i am in dilema of listening j2me j2ee etc like that i need a plan how to perfectly start and cover all these whch one to cover first and which one has to cover later and i need good suggestions from all users hope u can understand my postiion
thank u ,
saipothuri

Buy a good introductory book on Java programming, plus do these tutorials:
http://java.sun.com/docs/books/tutorial/index.html
....Among those tutorial, when you tackle JDBC: http://java.sun.com/docs/books/tutorial/jdbc/index.html
use Oracle as a local DB and a DB served on network by a Web application.
For Web application and J2EE, you will have to buy another introductory book.

Need design suggestion(s)

Similar Messages

Maybe you are looking for