NEED HELP!!!!! Create Tablespace, User, and Schema

Hello Everyone,
I am kind of confuse with Oracle 10g since i am doing it first time. I am trying to accomplish to create a user for my WORLD database and by using Report Builder 10g to generate reports.
I have been told that i need to create a Tablespace in my WORLD database in order to log-in to the Report Builder. When I am trying to log in to Report Builder i have to enter
UserName:xxx123
Password:password
Database:@@@.WORLD -- where you see @@@ i have to put my tablespace where i have to store my all tables and assign user to this table space that i have been told so far.
so here what i did.
I create a new database name WORLD
created New tables Space name mySpace
but when i was tyring to create table through Enterprise Manager
On create table screen i enter table Name EMPLOYEE
ask me to select Tablespace : mySpance
ask me to select Schema: (when i scroll down i saw my username) ??? so I am kind of confuse how do i make this stuff work?
Can anyone give me simple direction or steps that i need to follow.
I am trying to use Report Builder10g and using Oracle Database to access data.
Please anyone can give me suggetion asap. Its vrey important for me since i just got new entry level job.
Thank You

I have two TNSNAMES.ORA file
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora90\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
OEMREP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = KAM)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = OEMREP.broadvoice.com)
WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = KAM)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = world)
DEV1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = KAM)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = Dev1)
DEVAM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = KAM)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = devam)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = KAM)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Also, I checked in Services that my oracleserviceWORLD was running. So, my database run when i start my computer.
Please let me know if there is anything wrong. I am very thankful to you that you are helping me out. I do appreciate your kind help.
Thank You

Similar Messages

Need Help creating new user in Active Directory

I am trying to create a new user in active directory via a java application. I have included the code that I am using. I am able to successfully bind to Active Directory. I have been able to change passwords, and delete users, but I have not been able to create a user.
ldapHost : "mta101.DOM101.CEL.ACC.AF.MIL"
domainName: "dc=dom101,dc=cel,dc=acc,dc=af,dc=mil"
existing account: CN=Brett K. Humpherys,OU=Users,OU=CEL
I get the following error on the createSubcontext statement:
javax.naming.directory.InvalidAttributeValueException: [LDAP: error code 21 - 00000057: LdapErr: DSID-0C09098B, comment: Error in attribute conversion operation, data 0, v893 ; remaining name 'CN=test1,OU=Users,OU=CEL'
I have commented out the password portion and change the ObjectCategory to a 32 and get the same error.
    public GblStatus createAccount7(DbaDb dbConn,
                                    String jsrcName,
                                    String personName,
                                    String username,
                                    String password)
      Hashtable ldapEnv = new Hashtable(11);
      ldapEnv.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
      ldapEnv.put(Context.PROVIDER_URL, "ldap://" + this.ldapHost + ":636");
      ldapEnv.put(Context.SECURITY_AUTHENTICATION, "simple");
      ldapEnv.put(Context.SECURITY_PROTOCOL, "ssl");
      ldapEnv.put(Context.REFERRAL, "ignore");
      ldapEnv.put(Context.SECURITY_PRINCIPAL,"cn=" + this.adminAcct + ",cn=users," + this.domainName);
      ldapEnv.put(Context.SECURITY_CREDENTIALS, this.adminPwd);
       try
        // Create the initial context
        DirContext ctx = new InitialDirContext(ldapEnv);
        BasicAttributes attrs = new BasicAttributes();
        BasicAttribute ocs = new BasicAttribute("objectclass");
        ocs.add("top");
        ocs.add("person");
        ocs.add("organizationalPerson");
        ocs.add("user");
        attrs.put(ocs);
        BasicAttribute gn = new BasicAttribute("givenName", "test1");
        attrs.put(gn);
        BasicAttribute sn = new BasicAttribute("sn", "");
        attrs.put(sn);
        BasicAttribute cn = new BasicAttribute("cn", "test1");
        attrs.put(cn);
        BasicAttribute uac = new BasicAttribute("userAccountControl", "66048");
        attrs.put(uac);
        BasicAttribute sam = new BasicAttribute("sAMAccountName", "test1");
        attrs.put(sam);
        BasicAttribute disName = new BasicAttribute("displayName", "test1");
        attrs.put(disName);
        BasicAttribute userPrincipalName = new BasicAttribute
                                      ("userPrincipalName", "[email protected]");
        attrs.put(userPrincipalName);
        BasicAttribute instanceType = new BasicAttribute("instanceType", "4");
        attrs.put(instanceType);
        BasicAttribute objectCategory = new BasicAttribute
                  ("objectCategory","CN=User,CN=Schema,CN=Configuration," + domainName);
        attrs.put(objectCategory);
        String newVal = new String("\"password\"");
        byte _bytes[] = newVal.getBytes("Unicode");
byte bytes[] = new byte[_bytes.length - 2];
System.arraycopy(_bytes, 2, bytes, 0, _bytes.length - 2);
BasicAttribute attribute = new BasicAttribute("unicodePwd");
attribute.add((byte[]) bytes);
attrs.put(attribute);
ctx.createSubcontext("CN=test1,OU=Users,OU=CEL", attrs);
ctx.close();
catch (NameAlreadyBoundException nex)
System.out.println("User ID is already in use, please select a different user ID ...");
catch (Exception ex)
System.out.println("Failed to create user account... Please verify the user information...");
ex.printStackTrace();
return new GblStatus();
Any help would be much appreciated.

Hi .,
me too got up with same problem., can anyone help me.??
Someone help me to create attributes in AD using LDAP
package LDAPpack;
import javax.naming.*;
import javax.naming.directory.*;
import javax.naming.ldap.InitialLdapContext;
import javax.naming.ldap.LdapContext;
import java.util.Hashtable;
class CreateAttrs {
public static void main(String[] args) {
     Hashtable env = new Hashtable();
          env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
          env.put(Context.PROVIDER_URL, "ldap://10.242.6.166:389/");
          env.put(Context.SECURITY_AUTHENTICATION,"simple");
          env.put(Context.SECURITY_PRINCIPAL, "CN=cname,OU=Users,OU=Dealer,OU=Community,DC=test2,DC=org");
                    env.put(Context.SECURITY_CREDENTIALS, "password-1");
          LdapContext ctx =null;
          try {
               //ctx = new InitialLdapContext(env,null);
               try {
ctx = new InitialLdapContext(env,null);
               catch(NamingException e) {
System.out.println("Login failed");
System.exit(0);
if(ctx!=null){
System.out.println("Login Successful");
byte[] buf = new byte[] {0, 1, 2, 3, 4, 5, 6, 7}; // same data
     // Create a multivalued attribute with 4 String values
     BasicAttribute oc = new BasicAttribute("objectClassNew", "topNew");
     oc.add("personNew");
     oc.add("organizationalPersonNew");
     // Create an attribute with a byte array
     BasicAttribute photo = new BasicAttribute("jpegPhotoNew", buf);
     // Create attribute set
     BasicAttributes attrs = new BasicAttributes(true);
     attrs.put(oc);
     attrs.put(photo);
     Attributes attrs1 = ctx.getAttributes("CN=cname,OU=Users,OU=Dealer,OU=Community,DC=test2,DC=org");
System.out.println(attrs1);
Context result = ctx.createSubcontext("CN=cname,OU=Users,OU=Dealer,OU=Community,DC=test2,DC=org", attrs);
//i got error here; i attach the error below.
     ctx.close();
System.out.println("close");
     catch(NamingException e){
          e.printStackTrace();
ERROR:
Login Successful
javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - 00000057: LdapErr: DSID-0C090B38, comment: Error in attribute conversion operation, data 0, vece
ANYONE HELP ME PLS.
Edited by: vencer on Jun 19, 2008 12:38 AM

Question: How to create new user and schema in 11g?

Who can give me answer how to create a new user and schedule?
I had installed oracle 11g DB and oracle client in my windows OS. I found in the 11g there is no enterprise manager console with new version. It is different from with oracle 10g.So i don't know how to create it new user.
I had created new DB instance, but i don't how to create a user on that. Who can give me a hand for that? I hope one oracle experenice expert give my answers.
Thanks a lot!
Edited by: user774630 on Oct 27, 2008 10:01 PM
Edited by: user774630 on Oct 27, 2008 10:09 PM

Hi,
I am not sure that which option you are talking about? Are you using the EMCA,http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/emca.htm#SUTIL800] to create the new repository for the EM? If not the command line than the other only way is to use DBCA(Database Configuration Assistant).I believe you are talking about that. Yes ,if the message is coming creating the repository than after wards you can login to the EM. You would get the port no of the EM's HTTP port from the $OH/install/portlist.ini file.
HTH
Aman....
Edited by: Aman.... on Oct 28, 2008 11:36 AM
Gave up, link insertion doesn't work.

Need help migrating OD users and user data

I need some advise.
I have OD user accounts, more precisely NetHomeAccounts, and the users home folders reside on a 1TB RAID. The RAID is full. No surprise, new that would happen.
I've acquired a 12TB RAID that i plan to move the home folders too.
I also want to consolidate two servers into one. I believe I can use migration assistant to move the OD acounts from one server to another.
my question is about the user data i need to move between two RAIDs...
should I use rsyc to move the NetAccount Home folders from the full RAID to the new 12TB RAID?
- will the accounts migrated from server A to server B recognize there old home folder that is now hosted on a new 12TB RAID? will i run into permission errors?
please advise. Thank You.

There are serveral ways you can do this, and would depend very much on how you have set things up, although I feel the simplest would simply to shut your file sharing services down, clone the old RAID volume to the new RAID volume, modify/recreate your Users file sharing volume to point to the new RAID drive (so there's no need to modify OD records) and start your file sharing services again.
Another way would be to use the ditto (or rsync) command in Terminal to do the copy process if you aren't wanting to more the entire contents of a volume. Ultimately if your OD user records aren't being changed then user IDs, and hence permissions, should remain constant.
Without know exactly what is where and how things are set up it's hard to know exactly what the preferred route would be.

Need help creating custom objects and adding them to an array.

Hi Everyone,
So I'm dinking around in Powershell today and I'm failing at creating an array of custom objects. I want to create a HTML report that builds out after every MDT image update. To do that, I need to collect my data on what's contained in each build.
Here's my current script in progress -
function Parse-Dependents($fullname){
#PARAMETER SWITCHING
if(!($fullname)){
$dependents = get-dependents
if($fullname){
$dependents = get-dependents -fullname $fullname
#SPIN THROUGH ARRAY OF GUIDS FROM GET-DEPENDENTS
foreach($d in $dependents){
#SPIN THROUGH EACH APP IN APPLICATIONS.XML
foreach ($app in $apps){
#IF MATCH THEN ADD OBJECT WITH PROPERTIES
if($d -match $app.guid){
#ADD APPLICATION MATCH TO THE ARRAY
$applications = @{
'Name' = $app.ShortName;
'GUID' = $app.Guid;
'Version' = $app.Version;
'Last Modified Time' = $app.LastModifiedTime;
'Last Modified By' = $app.LastModifiedBy;
'Install Directory' = [string]'\\my\path\to\MDT\' + $app.WorkingDirectory.TrimStart(".","\")
'CommandLine' = $app.CommandLine;
new-object -typename PSObject -property $applications
#RETURN MATCHED ARRAY
return $applications
It all works great until I look at my output and see that I get my expected properties and array, but at the end it's created additional empty entries for each of my initial properties I assigned. So I get my list of apps like this :
powershell.ex... OrgChart Plugin \\my\mdt\server\ XX\user                     9/22/2014 5:... {ffee7497-0c...
And then below it :
                 CommandLine
                 Name
                 Install Direc...
                 Last Modified By
                 Version
                 Last Modified...
                 GUID
And these are all listed under the Name property. I'm still pretty new to PS (8 months or so now), and rarely have to create a custom object, but this seems like a case for doing so to create a custom html report. Any ideas would be greatly appreciated.
Ryan

It's not really all that strange.
If you look at your script, you're not outputting the hash table until both loops finish. The values are dependent on the properties of the $app objects enumerated in the inner loop, and only outputting an object if the dependent ($d) matches the $app
guid property.
At the end, you're outputting the hash table without that test, so it's going to have values based on the last $app in the loop, regardless of whether the guid matches the dependents or not.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Need help creating perfect curves and outlines (CS3, Windows XP)

Is there a way to make a specific curve that is perfect? It seems that with the pen tool you have to "eyeball" the curve as you drag it. I know that you can use the ellipse tool to make a perfect circle and then use the eraser or scissors tool to cut out a section of it, but that isn't really an ideal method. What I'd like to be able to do is while creating a path with the pen tool place an anchor for the next segment of the path and then specify e.g., a 6" radius, and have it make the path with a perfect 6" radius curve.
I also have a question about outlining, or more specifically, creating a perfect "floating" outline around curved objects. Using this image as an example - http://farm4.static.flickr.com/3153/2894804973_a6bf492692_o.png - once you have created one of the outlines, is there a way to perfectly create the other two "floating" outlines? I did those manually, and the straight sections are perfect because that's easy; but the curved sections are not perfect; they are "eyeballed".

[Man after my own heart]
> Is there a way to make a specific curve that is perfect?
Not with anything even approaching a sensible, no-nonsense procedure. What do you expect? This is only the top-selling vector drawing program, and it's only been on the market for 20+ years, charging loyal customers a couple hundred dollars for 14 version upgrades so far.
There are two--count 'em, TWO--Round Corners commands. One is a Filter, the other is an Effect. Both prompt you for a radius. Whether you actually get the value you enter as a radius of the curve is a matter of so many ridiculous caveats that you might as well consider it useless.
Example:
Assume your Ruler units are set to inches.
1. Rectangle Tool: Click. (Don't drag.) In the resulting dialog, enter 1" for both height and width.
2. White Pointer: click the lower left anchorPoint to select it. Delete. Now you have the most basic of all figures you might want to put a specified radius on, right? A 3-point path forming a right angle. Furher, you know its height and width; both legs of the right angle are 1" in length.
3. Filter>Stylize>RoundCorners. In the resulting modal dialog, enter .75" for the radius. Click OK.
4. The corner rounds.
5. DirecSelect (sigh--white pointer) the rounded segment (not the points, the segment). Copy. PasteInFront.
6. Look at the Transform Palette and tell me the height and width of the arc (should be equal to the radius, right? Tell me what you get. I get .5".
Why does Illustrator work this way? The only feedback I ever get when I raise issues like this is something akin to, "James, not everyone wants to do
technical drawing like you."
A straightforward user-defined corner radius is too
technical for the top-selling "professional" vector drawing program.
So what do you do? A lengthy barrage of cheezy workarounds and inane defenses of the indefensible is sure to follow shortly.
JET

What is the best practice to create IDM user and target accts via recon

usecase:
LDAP<--->idm---->AD.
User exists in LDAP. IDM and AD are empty. Need to create IDM user and AD acct from LDAP data.
I can recon against LDAP and create the IDM user. But I cannot create AD acct in the same recon process. What is the best practice to do the above.

i think you have to have a "Per-account Workflow" set which creates the user in AD.

HT1752 I have forgotten my admin password and need to create another user

I have forgotten my admin password and need to create another user. Have no disks to boot from!!

You need an installer disc in order to reset an admin password. I don't know if the following will work on your system, but give it a try:
You can also reset the password by printing out (or writing down) and carefully following these steps.
First, find the short name of the admin user on the machine. The easiest way of doing this is by looking at what their directory is called in the Users folder.
Now, start up the computer while holding down Cmd-S. It should boot into a command line. (If it doesn't, you may need to reset the firmware password, which is detailed elsewhere.)
Type these exact lines:
mount -uw /
ifconfig lo0 up
cd /var/db/netinfo
netinfod -s local
Now you'll need that short name. (You did write it down, didn't you?) Type "passwd", a space, and the short name of the admin. For example, if the admin was - rather prosaically - called "admin", you'd type "passwd admin".
The computer will now prompt you to change the password for "admin" (or whatever the short name was). Go ahead and type a new password.
Now, type:
sync
reboot
and the machine will reboot. The admin password should now be changed.

Need to authenticate a user and create session thru a procedure.

I am doing loadtest on portal and I need to authenticate a user and create user session to simulate user logging thru the web and I want to see a record is created in the wwctx_sso_session$ table.
can we do this from stored procedure ?
thanks.

Hi,
I guess the message is pretty clear !! you lack privilege.
SQL> conn imx/imx
Connected.
SQL>
SQL> create user testproc identified by testproc;
create user testproc identified by testproc
ERROR at line 1:
ORA-01031: insufficient privileges
SQL> create or replace procedure sp_createsuser(username varchar2)
2 as
3 begin
4 execute immediate 'create user ' || username || ' identified by ' || username;
5 end;
6 /
Procedure created.
SQL> exec sp_createsuser('testproc');
BEGIN sp_createsuser('testproc'); END;
ERROR at line 1:
ORA-01031: insufficient privileges
ORA-06512: at "IMX.SP_CREATESUSER", line 4
ORA-06512: at line 1
SQL> conn sys/******* as sysdba
Connected.
SQL> grant create user to imx;
Grant succeeded.
SQL> conn imx/imx
Connected.
SQL> exec sp_createsuser('testproc');
PL/SQL procedure successfully completed.
SQL> conn sys/syssys as sysdba
Connected.
SQL> select username from dba_users where username like 'TESTP%';
USERNAME
TESTPROC
SQL>Regards

Move users and schemas from one instance to another

Hi, I'm starting out in a DBA position.
My task at the moment is to move users and schemas from one instance to another.
We're using 9.2.0.7.
I have concluded that the following steps are necessary to move users and schemas from one instance to another :
1. Create the needed tablespaces.
2. Create the users that exist in the source instance
3. Use exp to do a full export
4. Use imp to re-create the schemas from the output file created by exp in step 3
Am I missing anything ?
Thanks,
Gabriel

3. Use exp to do a full exportInstead of doing a FULL export just export the users you want to move and imp that in other database using FROMUSER & TOUSER parameter.
Daljit Singh

Create buld user and modify attributes

Hi
I just started with powershell and really could need some help regarding creating bulk users accounts.
I need to create new users with the follwing attributes filled in.
GidNumer 65050
loginShell /bin/sh
mssFU30name blblblbl
uid hdfhdfhdh
uidNumber 65555
unixHomeDirectory /home/1245
I cannot find these attributes in Set-aduser.
Is there a way in powershell that I can create new users by cvs and sets the needed attributes?
Kind regards
Rene de Vries

Hi,
Yes, you can use the -Add (or -Replace) parameter of Set-ADUser to set these values:
http://technet.microsoft.com/en-us/library/ee617215.aspx
If you want to set these values when you create the user with New-ADUser, look into the -OtherAttributes parameter:
http://technet.microsoft.com/en-us/library/ee617253.aspx
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

Uber Noob Needs Help Creating website!

I need help creating my webpage: It has a textbox on it were
the user enters a URL and it then redirects the end user to that
URL when they press the GO Button. It also has a check box saying
"Hide my IP", If the end user clicks this box and then clicks go
they will be directed to the website they stateted in the Textbox
but this time it shall mask there IP Address so they can bypass
proxys and surf anonomosly. Please can someone give me some HTML
code i could use for this site or a Link to a website that can give
me the code.

I assume the application is connecting to Oracle using an application ID/password. If so, check to see if that user has a private synonyn to the table. If so drop it since you have a public synonym.
Verify that the public synonym is in fact correct. Drop and recreate the public synonym if you cannot select against the synonym name using an ID that can perform select * from inhouse.icltm where rownum = 1. That is if this other user cannot issue select * from icltm where rownum = 1 without an error.
Check that the application ID has the necessary object privileges on the table.
Queries you need
select * from dba_synonyms
where table_owner = 'INHOUSE'
and table_name = 'ICLTM'
You may find both public and private synonms. Either fix or delete. (Some may reference someelses.icltm table if one exists)
select * from dba_tab_privs
where table_name = 'ICLTM'
and owner = 'INHOUSE'
Note - it is possible to create mixed case or lower case object names in Oracle by using double quotes around the name. Do not do this, but do look to see that this was not done.
You could also query dba_objects for all object types that have the object_name = 'ICLTM'
HTH -- Mark D Powell --

Need to create a user who will run the logminer what rights should be given

I Need to create a user who will run the logminer what specific rights should be given in order to run the logminer and query the logminer views. Cant give the sysdba privilages.
Any help in this regard will be really appericiated.
Thanks

I have given the following privilages
GRANT CREATE SESSION TO NEW_USER;
GRANT SELECT ANY TABLE TO NEW_USER;
GRANT EXECUTE ON DBMS_LOGMNR TO NEW_USER;
GRANT EXECUTE ON SYS.DBMS_LOGMNR_D TO NEW_USER;
GRANT SELECT ON V_$SESSION TO NEW_USER;
GRANT SELECT ON V_$ARCHIVED_LOG TO NEW_USER;
GRANT SELECT ON V_$LOG TO NEW_USER;
GRANT SELECT ON V_$LOGFILE TO NEW_USER;
GRANT SELECT ON V_$LOGMNR_CONTENTS TO NEW_USER;
but when i try to add the logfile it gives me the following error
ERROR at line 1:
ORA-06550: line 1, column 85:
PLS-00201: identifier 'DBMS_LOGMNR.NEW' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
What additional rights can i gave to run this
Thanks

How to create new user and How can i assign end user roles

Hi,
I am new to SAP, please explain how to create end users and their roles
Thanks
ravi

Hi,
Roles are decided by IT managers. Suppose if Persons who are working in shopfloor or production side
give authorization to Production order create , change and Confirm like that etc
1. In role maintenance (transaction PFCG), choose the Authorizations tab page.
2. To change the authorization data for the transactions assigned to the role, choose Change Authorization Data or Expert Mode for Profile Generation. Otherwise, a dialog box appears in expert mode (see Regenerating an Authorization Profile After Changes).
Please take telp from Basis person also refer this link,
http://help.sap.com/saphelp_46c/helpdata/EN/52/6714a9439b11d1896f0000e8322d00/frameset.htm
Thanks

How to create portal user and integrate with external appl login

How to create portal user and integrate the user with external application for single sign-on ?
I want to access my external application thru portal user ..?
Shyam

Hi Jithin,
The link that you've shared talks about a different scenario.
In my case, I want to pass the portal user id when the user clicks on the Help Link present in the header area.
I am trying to pass it along with the Help Link Url property of a masthead iview but it is not getting passed to the target Url.
I would like to know if it is possible to pass the Portal User Id in this way or not.
Though if we create a appintegrator iview and pass the user id <User.UserID> along with the target Url, it reaches there.
Thanks & Regards,
Anurag

NEED HELP!!!!! Create Tablespace, User, and Schema

Similar Messages

Maybe you are looking for