Need help doing a reverse of a file on a different server
Hi - I'm trying to a reverse on a file that is on a different machine than my personal pc.
My steps:
1) created physical arch and test was successful to server.
2) log arch and context defined
3) in designer, created a model (as file).
Two questions:
1) What is the best way to reverse? Create a data store under the file model and do the column reverse?
2) My current issue is: When I do a column reverse, it says "The directory $ETL_DROP/sourcefiles specified does not exist" ... but it does.
- $ETL_DROP is an environment var on linux to point to this directory and "sourcefiles" is the subdirectory where source files are stored.
- Also, in the Definition tab, when I click on browse, it gives the same error but then opens up a browse window of my local pc... weird...
Thoughts?
Thanks!
Dan
Hi ,
To reverse engineer a file (including csv or Excel files) using the File Technology, the file has to be local to ODI Designer.
1. If your files are on a remote File System, you will need to copy one of your files to the machine ODI Designer is running on to allow ODI to retrieve the metadata information of the file.
2. In Topology create a Physical Schema, the directory you enter for Data and Work Schema should point at this local file.
3. Then define the File Datastore in ODI Designer. Enter a name, browse and select the file and fill in each filed of the Files tab.
* If its a Fixed file, click on the grid icon on the Columns tab to enter the columns and have Automatic Adjustment checked.
* If its a Delimited file, use the Reverse button on the Columns tab to reverse the columns.
* Right click on the File Datastore select View Data, if you can view data, that means the File Datastore has been defined correctly.
* If not, check each tab of the File Datastore to make sure everything is defined correctly and retry.
4. Once View Data is successful, you may now change the directories (Data and Work Schema in Topology) to point at the remote File System. These directories must be accessible to the ODI Agent that will be used to run the transformations. The directory can be an absolute path (m:/public/data/files) or relative to the ODI Agent startup directory (../demo/files). It is strongly advised to use a UNC (independent from the execution location) for the path. When running the transformations with "no agent", the directory is relative to the directory where Oracle Data Integrator has been installed.
Thanks,
Sutirtha
Similar Messages
-
Hi Friends,
Need help for cenvat reversal.
Reversed MIRO by MR8M & MIGO by 102 movement but not able to post & cancel cenvat by J1IEX.
In table J_1IEXCHDR status = "P" and J1I5 does not update for document of 102 movement because reversal document of MIGO, i.e. material document with 102 movement type does not have excise tab. MBSM-Cancelled Material Documents, does not show any of the material documents.
Want to reverse the cenvat credit, please help.
--Anil BhamereHi,
If I select Cancellation in MIGO then there is only Material Document option.
In MIGO Purchase Order option shows for Goods Receipt, Goods Issue and Subsequet Adj.
In this case I have been selected Goods Receipt option followed by purchase order number by which original goods receipt MIGO was created, selected 102 movement type and from line item respective MIGO document. The reversal document created successfully where as original MIGO document does not show in cancelled document list. When post option selected from J1IEX and entered vendor excise number then message appeared as No Part I exists for availing credit in excise invoice xxxxx.
If Cancel option selected from J1IEX and entered vendor excise number then message appeared as Excise invoice xxxx has already been posted for vendor xxxxx.
Please help.
Regards,
Anil Bhamere -
I have tried downloading photoshop cs2 and cs4 on a new computer. I have the disc available for cs2 and the serial number for cs4. They are both registered in my name. I need help doing a download. I was able to get part way through cs4, it showed up in my downloads but never got as far in the process as to ask for serial numbers. I tried with cs2 and I got an error message that some bit of information was incorrect. I currently have both downloaded on two other lap tops I own. One is operational and one is dead. I cannot access the dead one to remove the program. Thank you in advance for any assistance.
For CS2 you will need to download a special new version
CS2 Activation
You might find CS4 download here
Prodesign Tools — Photoshop Direct Download Links -
Hey guys... I need your help!! I started a project using Premiere Pro 2 and was 80% when I formatted my computer (all my project files were always saved to a external hard drive). Anyways instead of installing Premiere Pro 2, I installed Premiere Pro Cs3. Problem is whenever I try starting up my project it asks me to link every file used. When I do this it says "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." I took my external harddrive to friend's house who has Premiere Pro 2 and it says the same thing. Why did this happen? Is there anyway around it... Any help would be greatly appreciated, I put over 20 hours into editing this movie... I don't want it all to go to waste.
Frequently answered question
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you -
Need help pulling data from an outside file into my array. Please help =)
Hi,
I need help adapting my array to read the interest rates from an outside file. Here is my code and the outside file I wrote. Please help. Oh, the array in question is on line 259, inside of my calculation() method.
Thanks...
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import java.text.NumberFormat;
import java.text.DecimalFormat;
import java.io.*;
import javax.swing.JOptionPane;
public class Workshop5 extends JFrame implements ActionListener
//declare gui components
//declare labels
JPanel contentPane = new JPanel();
JPanel graphPane = new JPanel();
JLabel instructionLabel = new JLabel();
JLabel amountLabel = new JLabel();
JLabel orLabel = new JLabel();
JLabel comboBoxLabel = new JLabel();
JLabel termLabel = new JLabel();
JLabel rateLabel = new JLabel();
JLabel calcLabel = new JLabel();
JLabel paymentLabel = new JLabel();
JLabel tableLabel = new JLabel();
//declare font object
Font labelFont = new Font("Tahoma", Font.PLAIN, 16);
//declare text fields
JTextField amountField = new JTextField(20);
JTextField termField = new JTextField(20);
JTextField rateField = new JTextField(20);
JTextField paymentField= new JTextField(20);
//declare combo box for loan selection
JComboBox comboBox = new JComboBox();
//declare button group and radio buttons
ButtonGroup buttonGroup = new ButtonGroup();
JRadioButton enterRadioButton = new JRadioButton("Enter amount, term, & rate", true);
JRadioButton selectRadioButton = new JRadioButton("Select a preset term/rate loan", false);
//declare button objects
JButton clearButton = new JButton();
JButton calcButton = new JButton();
JButton quitButton = new JButton();
//declare text area for amortization
JTextArea amortTextArea = new JTextArea();
JTextArea testTextArea = new JTextArea();
//declare scroll bar for amortization table
JScrollPane scrollPane = new JScrollPane(amortTextArea,ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS,ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED);
public Workshop5()
instructionLabel.setText("Choose one of the following payment calculation options:");
instructionLabel.setFont(new Font("Tahoma",Font.PLAIN,16));
//adds both buttons to button group
buttonGroup.add(enterRadioButton);
buttonGroup.add(selectRadioButton);
enterRadioButton.setFont(labelFont);
enterRadioButton.setBackground(Color.WHITE);
enterRadioButton.setContentAreaFilled(false);
enterRadioButton.addActionListener(this); //adds action listener to enter radio button
orLabel.setText("OR");
orLabel.setFont(new Font("Tahoma",Font.BOLD,18));
selectRadioButton.setFont(labelFont);
selectRadioButton.setBackground(Color.WHITE);
selectRadioButton.setContentAreaFilled(false);
selectRadioButton.addActionListener(this); //adds action listener to select radio button
amountLabel.setText("Enter mortgage amount");
amountLabel.setFont(new Font("Tahoma", Font.PLAIN,16));
amountField.requestFocusInWindow();
termLabel.setText("Enter term length in years:");
termLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
rateLabel.setText("Enter interest rate:");
rateLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
comboBoxLabel.setText("Select a loan:");
comboBoxLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
comboBox.setBackground(new Color(255,255,255));
comboBox.setFont(new Font("Tahoma", Font.PLAIN, 14));
comboBox.setEnabled(false);
ComboBox();
calcLabel.setText("Press Calculate button to determine monthly payment.");
calcLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
calcButton.setText("Calculate");
calcButton.setFont(new Font("Tahoma", Font.BOLD, 14));
calcButton.addActionListener(this);
//define monthly payment label
paymentLabel.setText("Monthly payment:");
paymentLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
//define monthly payment text field
paymentField.setFont(new Font("Tahoma", Font.BOLD,16));
paymentField.setBackground(new Color(255,255,255));
paymentField.setEditable(false);
//define clear button
clearButton.setText("Clear");
clearButton.setFont(new Font("Tahoma", Font.BOLD,14));
clearButton.addActionListener(this);
//define quit button
quitButton.setText("Quit");
quitButton.setFont(new Font("Tahoma", Font.BOLD,14));
quitButton.addActionListener(this);
tableLabel.setText("Amoritization Table");
tableLabel.setFont(new Font("Tahoma", Font.BOLD, 16));
graphPane.setBackground(Color.WHITE);
//add components to content
getContentPane().add(contentPane);
contentPane.setLayout(null);
addComponent(contentPane, instructionLabel, 80,10,450,26);
addComponent(contentPane, enterRadioButton, 30,40,220,30);
addComponent(contentPane, orLabel, 280,40,100,30);
addComponent(contentPane, selectRadioButton, 335,40,350,30);
addComponent(contentPane, amountLabel, 100,80,220,26);
addComponent(contentPane, amountField, 300,80,150,26);
addComponent(contentPane, termLabel, 15,125,200,30);
addComponent(contentPane, termField, 195,125,125,30);
addComponent(contentPane, rateLabel, 62,160,200,30);
addComponent(contentPane, rateField, 195,165,125,30);
addComponent(contentPane, comboBoxLabel, 400,125,200,26);
addComponent(contentPane, comboBox, 400,155,150,30);
addComponent(contentPane, calcLabel, 100,200,400,30);
addComponent(contentPane, calcButton, 250,240,100,30);
addComponent(contentPane, paymentLabel, 150,285,200,30);
addComponent(contentPane, paymentField, 300,285,100,30);
addComponent(contentPane, clearButton, 100,330,100,30);
addComponent(contentPane, quitButton, 400,330,100,30);
addComponent(contentPane, tableLabel, 200,370,300,26);
addComponent(contentPane, scrollPane, 10,400,450,360);
addComponent(contentPane, graphPane, 475,400,305,360);
//add window listener to close window when user presses X
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
pack();
//method to add components
private void addComponent(Container container, Component c, int x, int y, int width, int height)
c.setBounds(x, y, width, height);
container.add(c);
//action performed method
public void actionPerformed(ActionEvent event)
Object source = event.getSource();
if (source == calcButton)
Calculate();
if (source == clearButton)
Clear();
if (source == quitButton)
Exit();
//defines active area based on user selection of mortgage calculation method
//if user chooses to enter the mortgage manually, combo box fields are inactive
if (source == enterRadioButton)
comboBox.setEnabled(false);
termField.setEnabled(true);
termField.setEditable(true);
rateField.setEnabled(true);
rateField.setEditable(true);
amountField.setText("");
amountField.requestFocusInWindow();
termField.setText("");
rateField.setText("");
paymentField.setText("");
amortTextArea.setText("");
//if user chooses to select from a preset mortgage, rate and term fields are inactive
if (source == selectRadioButton)
comboBox.setEnabled(true);
termField.setEnabled(false);
termField.setEditable(false);
rateField.setEnabled(false);
rateField.setEditable(false);
amountField.setText("");
amountField.requestFocusInWindow();
termField.setText("");
rateField.setText("");
paymentField.setText("");
amortTextArea.setText("");
}//end of action performed method
//combo box method
public void ComboBox()
String[] LoanArray = {" 7 years at 5.35 %", " 15 years at 5.50 %", " 30 years at 5.75 %"};
for (int i = 0; i < LoanArray.length; i++)
comboBox.addItem(LoanArray);
}//end combo box method
//calculation method
void Calculate()
//resets fields
paymentField.setText("");
amortTextArea.setText("");
//calculation variables
NumberFormat currency = NumberFormat.getCurrencyInstance();
int [] termArray = {7, 15, 30}; //array of years
double [] yearlyInterestArray = {5.35, 5.5, 5.75}; //array of interest
int totalMonths = 0; //total months
double Loan = 0.0; //amount of loan
double MonthlyInterest = 0.0; //monthly interest rate
double Payment = 0.0; //calculate payment
double monthlyPayment = 0.0; //calculate monthly payment
double Interest = 0.0; //variable for Interest Array input
int Term = 0; //variable for Term Array input
double NewMonthlyInterest = 0.0; //new interest amount
double NewLoan = 0.0; //new loan amount
double Reduction = 0.0; //principle reduction
//validate input
try
Loan = Double.parseDouble(amountField.getText());
catch (NumberFormatException e)
JOptionPane.showMessageDialog(null,"Invalid Entry. Please enter valid loan amount.", "Error", JOptionPane.WARNING_MESSAGE);
//resets input fields after error message
amountField.setText("");
amountField.requestFocusInWindow();
//if select button is chosen
if (selectRadioButton.isSelected())
int index = comboBox.getSelectedIndex();
Term = termArray[index];
Interest = yearlyInterestArray[index];
//if user chooses to enter mortgage information
else
if (enterRadioButton.isSelected())
//validates input
try
Term = Integer.parseInt(termField.getText());
catch (NumberFormatException e)
JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid term length in years.", "Error",JOptionPane.WARNING_MESSAGE);
//clears fields after error message
termField.setText("");
termField.requestFocusInWindow();
try
Interest = Double.parseDouble(rateField.getText());
catch (NumberFormatException e)
JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid rate (without percent symbol).","Error",JOptionPane.WARNING_MESSAGE);
//clears fields after error message
rateField.setText("");
rateField.requestFocusInWindow();
//perform calculations
if (Loan > 0)
Loan = Double.parseDouble(amountField.getText());
MonthlyInterest = (Interest / 12)/100;
totalMonths = Term * 12;
monthlyPayment = Loan * MonthlyInterest *(Math.pow((1 + MonthlyInterest), totalMonths)/(Math.pow((1 + MonthlyInterest), totalMonths)-1));
paymentField.setText("" + currency.format(monthlyPayment));
//send information to amortization text area
amortTextArea.append("Number\t");
amortTextArea.append(" Amount\t");
amortTextArea.append("Interest\t");
amortTextArea.append("Principle\t");
amortTextArea.append("Balance\n");
NewLoan = Loan;
for (int i = 1; i <= totalMonths; i++)
NewMonthlyInterest = MonthlyInterest * NewLoan;
Reduction = monthlyPayment - NewMonthlyInterest;
NewLoan = NewLoan - Reduction;
amortTextArea.append(" " + i +"\t");
amortTextArea.append(" " + currency.format(monthlyPayment) + "\t");
amortTextArea.append(" " + currency.format(NewMonthlyInterest)+ "\t");
amortTextArea.append(" " + currency.format(Reduction) + "\t");
amortTextArea.append(" " + currency.format(NewLoan) + "\n");
//resets fields if loan amount is less than zero
if((Loan <= 0 || Term <= 0 || Interest <= 0))
paymentField.setText("");
amortTextArea.setText("");
}//end calcualtion method
//clear method
void Clear()
amountField.setText("");
amountField.requestFocusInWindow();
termField.setText("");
rateField.setText("");
paymentField.setText("");
amortTextArea.setText("");
}//end of clear method
//main method
public static void main(String args[])
Workshop5 f = new Workshop5();
f.setTitle("Carol's Mortgage Calculator");
f.setBounds(200,100,800,800);
f.setResizable(false);
f.setVisible(true);
}//end of main method
//exit method
void Exit()
System.exit(0);
}//end of exit method
}//program end
My data file is called: "InterestData.dat" and only contains the following text:
5.35, 5.5, 5.75Ok, now I am getting this error message:
cannot resolve symbol method lenght()
Please help me out here, this is due tomorrow and I've been killing myself on it...
attaching program with revised code included, see beginning of calculation method line 250:
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.* ;
import java.text.NumberFormat;
import java.text.DecimalFormat;
import java.io.*;
import javax.swing.JOptionPane;
public class Workshop5 extends JFrame implements ActionListener
//declare gui components
//declare labels
JPanel contentPane = new JPanel();
JPanel graphPane = new JPanel();
JLabel instructionLabel = new JLabel();
JLabel amountLabel = new JLabel();
JLabel orLabel = new JLabel();
JLabel comboBoxLabel = new JLabel();
JLabel termLabel = new JLabel();
JLabel rateLabel = new JLabel();
JLabel calcLabel = new JLabel();
JLabel paymentLabel = new JLabel();
JLabel tableLabel = new JLabel();
//declare font object
Font labelFont = new Font("Tahoma", Font.PLAIN, 16);
//declare text fields
JTextField amountField = new JTextField(20);
JTextField termField = new JTextField(20);
JTextField rateField = new JTextField(20);
JTextField paymentField= new JTextField(20);
//declare combo box for loan selection
JComboBox comboBox = new JComboBox();
//declare button group and radio buttons
ButtonGroup buttonGroup = new ButtonGroup();
JRadioButton enterRadioButton = new JRadioButton("Enter amount, term, & rate", true);
JRadioButton selectRadioButton = new JRadioButton("Select a preset term/rate loan", false);
//declare button objects
JButton clearButton = new JButton();
JButton calcButton = new JButton();
JButton quitButton = new JButton();
//declare text area for amortization
JTextArea amortTextArea = new JTextArea();
JTextArea testTextArea = new JTextArea();
//declare scroll bar for amortization table
JScrollPane scrollPane = new JScrollPane(amortTextArea, ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS,ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED);
public Workshop5()
instructionLabel.setText("Choose one of the following payment calculation options:");
instructionLabel.setFont(new Font("Tahoma",Font.PLAIN,16));
//adds both buttons to button group
buttonGroup.add(enterRadioButton);
buttonGroup.add (selectRadioButton);
enterRadioButton.setFont(labelFont);
enterRadioButton.setBackground(Color.WHITE);
enterRadioButton.setContentAreaFilled(false);
enterRadioButton.addActionListener(this); //adds action listener to enter radio button
orLabel.setText("OR");
orLabel.setFont(new Font("Tahoma",Font.BOLD,18));
selectRadioButton.setFont(labelFont);
selectRadioButton.setBackground(Color.WHITE);
selectRadioButton.setContentAreaFilled(false);
selectRadioButton.addActionListener (this); //adds action listener to select radio button
amountLabel.setText("Enter mortgage amount");
amountLabel.setFont(new Font("Tahoma", Font.PLAIN,16));
amountField.requestFocusInWindow();
termLabel.setText("Enter term length in years:");
termLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
rateLabel.setText("Enter interest rate:");
rateLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
comboBoxLabel.setText("Select a loan:");
comboBoxLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
comboBox.setBackground(new Color(255,255,255));
comboBox.setFont(new Font("Tahoma", Font.PLAIN, 14));
comboBox.setEnabled(false);
ComboBox();
calcLabel.setText("Press Calculate button to determine monthly payment.");
calcLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
calcButton.setText("Calculate");
calcButton.setFont(new Font("Tahoma", Font.BOLD, 14));
calcButton.setBackground(new Color(202,255,112));
calcButton.addActionListener(this);
//define monthly payment label
paymentLabel.setText("Monthly payment:");
paymentLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
//define monthly payment text field
paymentField.setFont (new Font("Tahoma", Font.BOLD,16));
paymentField.setBackground(new Color(255,255,255));
paymentField.setEditable(false);
//define clear button
clearButton.setText("Clear");
clearButton.setFont(new Font("Tahoma", Font.BOLD,14));
clearButton.setBackground(new Color(202,255,112));
clearButton.addActionListener(this);
//define quit button
quitButton.setText("Quit");
quitButton.setFont(new Font("Tahoma", Font.BOLD,14));
quitButton.setBackground(new Color(202,255,112));
quitButton.addActionListener(this);
//define label for amortization table
tableLabel.setText ("Amoritization Table");
tableLabel.setFont(new Font("Tahoma", Font.BOLD, 16));
graphPane.setBackground(Color.WHITE);
//add components to content
getContentPane().add(contentPane);
contentPane.setLayout(null);
addComponent(contentPane, instructionLabel, 80,10,450,26);
addComponent(contentPane, enterRadioButton, 30,40,220,30);
addComponent(contentPane, orLabel, 280,40,100,30);
addComponent(contentPane, selectRadioButton, 335,40,350,30);
addComponent(contentPane, amountLabel, 100,80,220,26);
addComponent(contentPane, amountField, 300,80,150,26);
addComponent(contentPane, termLabel, 15,125,200,30);
addComponent(contentPane, termField, 195,125,125,30);
addComponent(contentPane, rateLabel, 62,160,200,30);
addComponent(contentPane, rateField, 195,165,125,30);
addComponent(contentPane, comboBoxLabel, 400,125,200,26);
addComponent(contentPane, comboBox, 400,155,150,30);
addComponent(contentPane, calcLabel, 100,200,400,30);
addComponent(contentPane, calcButton, 250,240,100,30);
addComponent(contentPane, paymentLabel, 150,285,200,30);
addComponent(contentPane, paymentField, 300,285,100,30);
addComponent(contentPane, clearButton, 100,330,100,30);
addComponent(contentPane, quitButton, 400,330,100,30);
addComponent(contentPane, tableLabel, 200,370,300,26);
addComponent(contentPane, scrollPane, 10,400,450,360);
addComponent(contentPane, graphPane, 475,400,305,360);
//add window listener to close window when user presses X
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
pack();
//method to add components
private void addComponent(Container container, Component c, int x, int y, int width, int height)
c.setBounds(x, y, width, height);
container.add(c);
//action performed method
public void actionPerformed(ActionEvent event)
Object source = event.getSource();
if (source == calcButton)
Calculate();
if (source == clearButton)
Clear();
if (source == quitButton)
Exit();
//defines active area based on user selection of mortgage calculation method
//if user chooses to enter the mortgage manually, combo box fields are inactive
if (source == enterRadioButton)
comboBox.setEnabled(false);
termField.setEnabled(true);
termField.setEditable(true);
rateField.setEnabled(true);
rateField.setEditable(true);
amountField.setText ("");
amountField.requestFocusInWindow();
termField.setText("");
rateField.setText("");
paymentField.setText ("");
amortTextArea.setText("");
//if user chooses to select from a preset mortgage, rate and term fields are inactive
if (source == selectRadioButton)
comboBox.setEnabled(true);
termField.setEnabled(false);
termField.setEditable(false);
rateField.setEnabled (false);
rateField.setEditable(false);
amountField.setText("");
amountField.requestFocusInWindow();
termField.setText ("");
rateField.setText("");
paymentField.setText("");
amortTextArea.setText("");
}//end of action performed method
//combo box method
public void ComboBox()
String[] LoanArray = {" 7 years at 5.35 %", " 15 years at 5.50 %", " 30 years at 5.75 %"};
for (int i = 0; i < LoanArray.length; i++)
comboBox.addItem(LoanArray);
}//end combo box method
//calculation method
void Calculate()
//resets fields
paymentField.setText("");
amortTextArea.setText("");
//calculation variables
NumberFormat currency = NumberFormat.getCurrencyInstance();
//declare input stream object
InputStream istream;
//create a file object to refer to the outside file
File interestData = new File("InterestFile.dat");
//assign instream to the new file object
istream = new FileInputStream(interestData);
try
StringBuffer sb = new StringBuffer();
BufferedReader in = new BufferedReader(new FileReader(interestData));
String line = "";
while((line = in.readLine()) != null)
sb.append(line);
in.close();
String fileData = sb.toString();
String[] splitData = fileData.split(", ");
double [] yearlyInterestArray = new double[splitData.length()];
for(int j = 0; j < splitData.length(); j++)
yearlyInterestArray[j] = new Double(splitData[j]).doubleValue();
catch (IOException e)
JOptionPane.showMessageDialog(null, "File does not exist." + e.getMessage());
int [] termArray = {7, 15, 30}; //array of years
double [] yearlyInterestArray = { 5.35, 5.5, 5.75}; //array of interest
int totalMonths = 0; //total months
double Loan = 0.0; //amount of loan
double MonthlyInterest = 0.0; //monthly interest rate
double Payment = 0.0; //calculate payment
double monthlyPayment = 0.0; //calculate monthly payment
double Interest = 0.0; //variable for Interest Array input
int Term = 0; //variable for Term Array input
double NewMonthlyInterest = 0.0; //new interest amount
double NewLoan = 0.0; //new loan amount
double Reduction = 0.0; //principle reduction
//validate input
try
Loan = Double.parseDouble(amountField.getText());
catch (NumberFormatException e)
JOptionPane.showMessageDialog(null,"Invalid Entry. Please enter valid loan amount.", "Error", JOptionPane.WARNING_MESSAGE);
//resets input fields after error message
amountField.setText("");
amountField.requestFocusInWindow ();
//if select button is chosen
if (selectRadioButton.isSelected())
int index = comboBox.getSelectedIndex ();
Term = termArray[index];
Interest = yearlyInterestArray[index];
//if user chooses to enter mortgage information
else
if (enterRadioButton.isSelected())
//validates input
try
Term = Integer.parseInt(termField.getText());
catch (NumberFormatException e)
JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid term length in years.", "Error",JOptionPane.WARNING_MESSAGE);
//clears fields after error message
termField.setText("");
termField.requestFocusInWindow();
try
Interest = Double.parseDouble(rateField.getText());
catch (NumberFormatException e)
JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid rate (without percent symbol).","Error",JOptionPane.WARNING_MESSAGE);
//clears fields after error message
rateField.setText("");
rateField.requestFocusInWindow();
//perform calculations
if (Loan > 0)
Loan = Double.parseDouble(amountField.getText ());
MonthlyInterest = (Interest / 12)/100;
totalMonths = Term * 12;
monthlyPayment = Loan * MonthlyInterest *(Math.pow ((1 + MonthlyInterest), totalMonths)/(Math.pow((1 + MonthlyInterest), totalMonths)-1));
paymentField.setText("" + currency.format(monthlyPayment));
//send information to amortization text area
amortTextArea.append("Number\t");
amortTextArea.append(" Amount\t");
amortTextArea.append("Interest\t");
amortTextArea.append("Principle\t");
amortTextArea.append("Balance\n");
NewLoan = Loan;
for (int i = 1; i <= totalMonths; i++)
NewMonthlyInterest = MonthlyInterest * NewLoan;
Reduction = monthlyPayment - NewMonthlyInterest;
NewLoan = NewLoan - Reduction;
amortTextArea.append(" " + i +"\t");
amortTextArea.append (" " + currency.format(monthlyPayment) + "\t");
amortTextArea.append(" " + currency.format(NewMonthlyInterest)+ "\t");
amortTextArea.append(" " + currency.format(Reduction) + "\t");
amortTextArea.append(" " + currency.format(NewLoan) + "\n");
//resets fields if loan amount is less than zero
if((Loan <= 0 || Term <= 0 || Interest <= 0))
paymentField.setText("");
amortTextArea.setText("");
}//end calcualtion method
//clear method
void Clear()
amountField.setText("");
amountField.requestFocusInWindow();
termField.setText("");
rateField.setText("");
paymentField.setText("");
amortTextArea.setText("");
}//end of clear method
//main method
public static void main(String args[])
Workshop5 f = new Workshop5();
f.setTitle("Carol's Mortgage Calculator");
f.setBounds(200,100,800,800);
f.setResizable(false);
f.setVisible(true);
}//end of main method
//exit method
void Exit()
System.exit(0);
}//end of exit method
}//program end -
Need help to open and look for file by name
Hi,
Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
How can i look for the file by his name ?
Thx =)Hi ,
Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
The user ll type the serial that he wants delete ...
I already figured out what i need guys .. thx for the help ^^
I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
Thx ^^ -
Hi I need help first time here converting a file
Hi I need help first time here converting a file
Thank you for your subscription to our service. Please see below.
How to convert your file to PDF file:
Using Adobe Reader:
Launch Adobe Reader X or Reader XI
Select “Tools” and click “Sign In” link to sign in with your Adobe ID and password
Select “Create PDF” then click “Select File” button
Click “Convert” after select your file
Click “Download Converted File” link to download the file to your computer after the process is completed.
Using Web UI
Log into https://createpdf.acrobat.com/signin.html with your Adobe ID and password
Select “Convert to PDF”
Click “Select Files” button then choose your file Click “Download” button in the progress bar after completion of the process to download the PDF file to your computer.
Converted PDF files are stored at https://files.acrobat.com and you can log in with your Adobe ID and password. You can share your files with others or download them to your computer.
Please let me know if you have further questions.
Hisami -
Need help in Overwriting result in text file
Sorry, im new to Labview.
My situation is
this.
I can store the name and the result and i have the index.
Now
I'm having a problem on overwriting result i had in text file.
I
give you an example.
Now in my text file i have a name of a
student and the result.
i wan to overwrite the result of the
student.(this is just an example.)
can someone guide me please?
really
need help as this is my school project.
Thanks!
i'll attach my program i have done soon.you got the wrong idea.
i do not want to replace the file to a new file.
what i want was to edit the exsiting file if the same name appear twice.
Example:
in my text file i have already had the name of example Tom and result 80
and now i input the same name and diff result.
i wan was to overwrite the result.
my project was similar to this here is my attachment of my project
Attachments:
LOCATOR.vi 19 KB
TESTCAR.txt 1 KB -
Need help: Itunes cannot locate multiple missing files after renaming
All of music had strange names after transfering them to a new computer. I decided to use a program to rename all of them using a renaming program that renamed all of my music files based on their ID3 tags (Title, artist, etc).
Well now I went to Itunes and it cant find the any of the files (figured that), so I find one and Itunes asks if it should find more missing files, and hit yes, but it doesn't find any of the other newly renamed files. Is there anything I can do short of doing this for each individual file? Is there a way I can change Itune search parameters for finding missing files? ThanksThis is my standard post on the missing files thing...
This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
I sort of assumed the third party tool wouldn't have put things in an iTunes standard form which is why I offered my scrupt at the outset. If you can explain how they are organised I might be able to tweak up the script to work for your layout too.
tt2 -
Need help or someone to edit .fla file
Need help or someone to edit .fla file
The .fla file I want to edit is the flash in header at www.ridinggigistyle.com I want to remove the event button titled Boot Camp. I can send .fla file and request that edited changes be sent back to me. Direct email [email protected]
-
I need helping configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.
I have attempted to configure rdp access but it does not seem to be working for me Could I please ask someone to help me modify my current configuration to allow this? Please do step by step as I could use all the help I could get.
I need to allow the following IP addresses to have RDP access to my server:
66.237.238.193-66.237.238.222
69.195.249.177-69.195.249.190
69.65.80.240-69.65.80.249
My external WAN server info is - 99.89.69.333
The internal IP address of my server is - 192.168.6.2
The other server shows up as 99.89.69.334 but is working fine.
I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. Please take a look at my configuration file and give me the commands i need in order to put this through. Also please tell me if there are any bad/conflicting entries.
THE FOLLOWING IS MY CONFIGURATION FILE
Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course
Also the bolded lines are the modifications I made but that arent working.
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password DowJbZ7jrm5Nkm5B encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.6.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 99.89.69.233 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group network EMRMC
network-object 10.1.2.0 255.255.255.0
network-object 192.168.10.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 172.16.0.0 255.255.0.0
network-object 192.168.9.0 255.255.255.0
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service GMED tcp
description GMED
port-object eq 3390
object-group service MarsAccess tcp
description MarsAccess
port-object range pcanywhere-data 5632
object-group service MarsFTP tcp
description MarsFTP
port-object range ftp-data ftp
object-group service MarsSupportAppls tcp
description MarsSupportAppls
port-object eq 1972
object-group service MarsUpdatePort tcp
description MarsUpdatePort
port-object eq 7835
object-group service NM1503 tcp
description NM1503
port-object eq 1503
object-group service NM1720 tcp
description NM1720
port-object eq h323
object-group service NM1731 tcp
description NM1731
port-object eq 1731
object-group service NM389 tcp
description NM389
port-object eq ldap
object-group service NM522 tcp
description NM522
port-object eq 522
object-group service SSL tcp
description SSL
port-object eq https
object-group service rdp tcp
port-object eq 3389
access-list outside_1_cryptomap extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 192.168.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-data
access-list outside_access_in extended permit udp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-status
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ftp
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ldap
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq h323
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq telnet
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq www
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group SSL
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM522
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM1731
access-list outside_access_in extended permit tcp 173.197.144.48 255.255.255.248 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp any interface outside eq 3389
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333 object-group rdp
access-list outside_access_in extended permit tcp any host 99.89.69.333 object-group rdp
access-list out_in extended permit tcp any host 192.168.6.2 eq 3389
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp 99.89.69.334 3389 192.168.6.1 3389 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 99.89.69.338 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.6.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 68.156.148.5
crypto map outside_map 1 set transform-set ESP-3DES-MD5
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 1
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
tunnel-group 68.156.148.5 type ipsec-l2l
tunnel-group 68.156.148.5 ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:f47dfb2cf91833f0366ff572eafefb1d
: end
ciscoasa(config-network)#Unclear what did not work. In your original post you include said some commands were added but don't work:
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
and later you state you add another command that gets an error:
static (inside,outside) tcp 99.89.69.333 3389 192.168.6.2 3389 netmask 255.255.255.255
You also stated that 99.89.69.333 (actually 99.89.69.233, guessing from the rest of your config and other posts) is your WAN IP address.
The first static statement matches Cisco's documentation, which states that a static statement must use the 'interface' directive when you are trying to do static PAT utilizing the IP address of the interface. Since 99.89.69.333 is the assigned IP address of your WAN interface, that may explain why the second statement fails.
Any reason why you are using static PAT (including the port number 3389) instead of just skipping that directive? Static PAT usually makes sense when you need to change the TCP port number. In your example, you are not changing the TCP port 3389. -
Accessing a file on a different server
hi...can you please give me some idea on how to access a file on a remote server?
i just need to open that file on that server and append some data to it everytime someone calls my program?
I just know the ip address of that remote server and the path of that file..
tia
Edited by: hari786 on Aug 5, 2008 12:52 PMYou have to have a program on your computer that connects to the Internet, and sends some data to the other computer. Then you have to place a program on the remote server that will connect to the Internet, listen to it, receive the data from your computer, and then append the data to the remote file. This tutorial shows you how to do that:
[http://java.sun.com/docs/books/tutorial/networking/index.html]
You can't do all of this from your computer only - imagine the results if any computer (yours) could connect to any other computer (mine!!) it wanted to, and then wrote any data it wanted into my computer. That would not be nice. -
Need help: Problems with exported Dreamweaver html file in different browsers
I'm trying to send out a newsletter, and had our designer create it in Dreamweaver, and then export and html file which we uploaded. For some reason it looks wrong on Mac's, Gmail, and a few issues with Outlook. Does anyone know how to help with this, or had to work around this problem in the past?
I've attached our html file as well.
We're an eco startup with limited time and budget - so any help you have would be so appreciated.
Thank you!!World Centric Monthly Newsletter August 2009
Palo Alto Joins the Ban Against
Non-Recyclable Materials
This Spring, Palo Alto joined the list of more than 30 cities and counties in California who are making good on their efforts toward reducing their greenhouse gas emissions
by enacting partial or comprehensive bans on polystyrene (PS) foam and/or non-recyclable disposable foodservice containers. Around the same time, a California statewide ban on the use of PS containers was tabled before reaching the State Assembly floor. Representative
Jerry Hill, one of AB 1358’s sponsors, pulled the bill due
to concerns addressed in the Appropriations committee hearing of the bill, regarding the fiscal impacts which
were not addressed in bill’s contents.
Largely represented by the California Restaurant Association, opponents of AB 1358 lobbied legislative representatives and argued there would be a negative fiscal impact on struggling restaurant owners and their customers in order to accommodate the more expensive alternatives to PS containers. There are the unquantifiable and “hidden” costs of contaminating our bodies and environment which would far surpass the fiscal impact on the plastics, restaurants and consumer industries. Studies published by the Foundation for Advancements in Science and Education have indicated that varying levels of styrene residues
are present in 100% of all human fat tissue in the
United States, as PS products are found to lose weight after in contact with hot or fatty/acidic foods and liquids, causing migration of the styrene into the food or fluid, ending up in the human body. On the high end, the levels were “one third of levels known to cause neurotoxic symptoms”. In the environment,
PS is rarely recycled and does not biodegrade. Supporting safer alternatives to polystyrene, in addition to the collection infrastructure and processing mechanisms for the compostable and recyclable products would help create more green jobs in the long run and would be a move in the right direction away from unnecessary harm
to our health, our communities and our world. Keep your eyes open for a revised version of AB 1358 in Spring 2010! For more information about polystyrene
visit Earth Resource. For a partial energy, emissions and water analysis
of polystyrene and its alternatives visit our website. World Centric Compostable
Hot Cup Lid
World Centric is pleased to announce we now offer a fully compostable hot cup lid that
fits our 10oz, 12oz, 16oz,
and 20oz paper hot cups.
The lids can be ordered in cases of 1000 or packs of 100.
For more information or to order, please visit our website. This Month
We’d Like to Applaud
Project Open Hand
San Francisco's non-profit
organization that prepares and delivers food to seniors, people living with HIV and homebound critically-ill residents. For nearly 25-years Project Open Hand has been providing “meals with love” to local residents in need of help and care in
California’s San Francisco and Alameda counties.
Programs include meals, groceries and nutrition information as well as education and referral programs
for all of the people served. A staff dietitian also visits several sites per week to speak with seniors and critically ill local residents about the importance of eating well
and staying healthy.
Project Open Hand continues to serve nearly 800,000 annually and has served as a model for over 100 organizations across the United States and the world.
If you are interested in making a donation,
please visit Project Open Hand.
Help Project Open Hand continue to do what it
does best – deliver quality food to those in need.
“World Centric has gone
about every aspect of
business in the most
sustainable of ways.
It is a model for socially
responsible business.”
Ari Patz
Styrophobia
Industry Trends
Although PLA is a sustainable alternative to a petrochemical-
derived product, its limitation has
been not only its cost, but its inability
to maintain structural integrity in hot temperatures and humid conditions because of its low melting pint.
However, researchers at Teijin
(formerly in partnership with Cargill)
have improved their plant-based
‘Biofront’ PLA polymer to be able
to withstand higher temperatures –
by modifying its hydrolytic resistance.
Get more information here.
Get Great Deals!
Check out our clearence items.
Did you know?
Styrene can leach from polystyrene.
Over the long term, this can act as
a neurotoxin. Studies on animals
report harmful effects of styrene
on red-blood cells, the liver, kidney,
and stomach organs.
US Environmental Protection Agency (1992) “Styrene”. Air Toxics Website.
Where to Find us:
CRRA Conference
August 2 - 5
Palm Desert
Western Foodservice
& Hospitality Expo
August 30 - September 1
Livable Green
September 19
San Mateo
Find us: World Centric
2121 Staunton Ct. Palo Alto, CA
You are subscribed as <[email protected]>. Click here to manage your email subscription preferences.
Click here or reply to this email with 'unsubscribe' in the subject to unsubscribe from this list or if you feel you have received this message in error.
This message was sent from World Centric 2121 Staunton Ct Palo Alto CA 94306 United States. Click here to report email abuse.
You are subscribed as <[email protected]>. Click here to manage your email subscription preferences.
Click here or reply to this email with 'unsubscribe' in the subject to unsubscribe from this list or if you feel you have received this message in error.
This message was sent from World Centric 2121 Staunton Ct Palo Alto CA 94306 United States. Click here to report email abuse. -
Need help with Premiere Pro 6 media/file management!
I've been an Avid editor for 20+ years and understand media management in that world. I've recently learned FCP 7 and understand media management in that world. But for the life of me I cannot wrap my head around how Premiere Pro 6 manages media. I am looking for a very straightforward explanation, chart, anything to make sense of this. Thanks in advance for helping an old dog learn new tricks!
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download -
Need help using JTextArea to read large file
Hi here is the deal.
I've got a large file (about 12Mbytes) of raw data (all of the numbers are basically doubles or ints) which was formed with the ObjectOutputStream.writeInt/writeDouble (I say this to make clear the file has no ascii whatsoever).
Now I do the file reading on a SwingWorker thread where I read the info from the file in the same order I put it originally.
I need to convert it to string and visualize it on a JTextArea. It starts working. However a one point (56% to be exact since I know exactly the number of values I need to read) it stops working. The program doesn�t freeze (probably because the other worker thread froze) and I get no exceptions (even tough I�m catching them) and no errors.
Does anyone have any idea of what the problem could be?
Thank you very much in advance.
PD: I don�t know if it matters but I'm using ObjectInputStream with the readInt/readDouble functions to get the values and then turning them to strings and adding them to the JTextArea.I can put up the code.
I don't have it with me right now but I'll do it later.
Thank you.
Second. I need to debug a function aproximation that uses a method that has to manage that many numbers. If I don�t put it into a txt and read it there is no way I will know where the problems are, if any. And yes I can look at the txt and figure out problems. It's not that hard.
What I'll try to do is to write directly to regular txt file instead of doing it to the JTextArea.
Thank you for your help and I'll post back with the code and results.
PD: I don't know what profiling is, would you mind telling me?
Maybe you are looking for
-
I gave an ipot touch to my daughter and she wants to reset it because you can not delete the games my grandchildren put on it. When you hold the game you want to delete wiggles but never has an "X" to delete. We tried to reset it but wants a pass cod
-
Webdynpro ABAP/Portal. Plugin HTTP connection issue on WaitingEventQueue.js
Hello, We are experiencing a strange Portal Behavior with our Webdynpros. Our portal contains several iViews including some Webdynpro (ABAP) and some reporting transaction calls that use SAPgui for HTML. When portal is called for the first time and a
-
Does AMC adjust so YouTube/Vimeo videos are not too dark
Hi, been having problems with videoes coming out too dark in YouTube. This seems to be a problem lots of people are having. Just to clarify I mean the video is a lot darker on youtube/vimeo than if played in something like VLC on the same monitor.
-
Hey guys, I have a flash gallery that works all correctly. The only problem I have is when I go to load the site in the same browser for the second time it displays the last image within the gallery for all of the images. I know I need a reload scr
-
Hello Experts, Can somebody please guide me with some example senarios for the design of functional specs for the following: Customer statement, Balance confirmation, check deposit slip and for interfacing with Payment Tech, Interest letters I couldn