Need help firmware updated problem
dear apple support
how to firmwere updated window 8.1 64bit i got some 3194 plz help i how can update my iphone.
http://support.apple.com/kb/TS3694#3000
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Similar Messages
-
Xcode and firmware update problem
Hi all,
i've been working on my app for a few month now and i have about two more weeks until i finally submit it. everything went very good during development.. untill -
by ACCIDENT i've upgraded my firmware to 3.1.2
since my OS is 10.5.7, as i understand, i must install xcode 3.2.1. but this version also needs mac OS 10.6
so it's realy frustrating for me...
do i need now to upgrade/purchase OS 10.6 and also my xcode environment in order to continue working ?
can't i make a rollback to other firmware version supported by my current 3.1.2 xcode ?
i've searched the net endlessly and just couldn't find anyway to downgrade my firmware (i have a 5.11.7 baseband and 6.2 bootloader)
please...
any help ?GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
Welcome to Creative forums!
Try booting the player in the recovery mode.
. While the ZEN is off, press and hold down the play/pause button.
2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time. -
Zen 8G This device cannot start code 10 and firmware update problem
I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
Welcome to Creative forums!
Try booting the player in the recovery mode.
. While the ZEN is off, press and hold down the play/pause button.
2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time. -
*** E51 GREAT PHONE BUT NEED A FIRMWARE UPDATE... ...
Hi
TO THE NOKIA FIRMWARE UPDATE STAFF:
I bought that great phone NOKIA E51 but it needs a FIRMWARE UPDATE because the built'in camera gives photo(and videos too!) in VERY VERY "green" color that's too bad (MY OLD 6630 , so only 1,3 megapixel is best in photo quality against my actually E51..!)
*** SO PLEASE REMOVE THE GREEN COLOR TENDENCY IN THE PHOTO! ***
ANOTHER AND LAST problem I have noticed during mine along E51 testing is the integrate REAL PLAYER VERSION has VERY VERY big problems during *MP4* VIDEO PLAYBACK (MP4 VIDEOS MADE ON PURPOSE FOR MOBILE), VIDEO APPEARS In jerks (ESPECIALLY IN FULL SCREEN!) And SOME TIME IT BLOCKS DURING PLAYBACK!
*** SO PLEASE A NEW VERSION OF REAL PLAYER IN THE NEXT E51 FIRMWARE ***
FOR ALL THE REST THE E51 PHONE IS GREAT AND PRICE TOO (200€ IN ITALY), I BELIVE IT'LL BE A BEST SELLER -BUT- ONLY IF THE PROBLEMS I LISTED ABOVE WILL BE CORRECTED!!
i got latest firmware version: 100.34.20Hi,
I wrote to Nokia regarding this issue using the Nokia India site, and the Nokia for Business site. I also sent an email to [email protected]
Here is the text of the email:
Hi,
I bought my Nokia E51 four days back, and I am VERY happy with the
phone. However, I feel that there are some shortcomings with the
phone, which need to be addressed by firmware upgrades. I am listing
them here:
1) The camera has a VERY noticeable green tint
2) The video playback in full screen mode using RealPlayer is VERY
slow and choppy
3) In the "Missed Calls" part of the call log, there is NO way to
determine WHICH number of the contact was the call missed - "Mobile
Number", "Tel.(home)", "Tel.(office)" or what? The only way to
determine is to call back using the same screen, which is VERY
counterintuitive!
You can have a look at some more people agreeing with me here -
/discussions/board/message?board.id=communicators&thread.id=14028
and the problem 3) described in detail here -
/discussions/board/message?board.id=communicators&thread.id=15956
Apart from these 3 problems, I am VERY VERY happy with the E51 - it
lives up to all the promises it makes! Way to go, Nokia! I request you
to address those 3 issues as fast as possible!
Thanks and regards,
I request ALL other users of the phone to please contact Nokia similarly, to have these issues resolved ASAP. If someone can suggest more ways of contacting Nokia regarding this issue, please tell me! Thanks! -
Firmware update problem solved after Win XP SP3 -upd
I'm one of the numerous victims of ZEN firmware updating problem. At the start I had Win XP SP2 and WMP. My player is ZEN Micro 5gb and after trying to update firmware it had firmware problem and stayed in the recovery mode. Firmware updater and ZEN Media Explorer couldn't recognize the player. So that's how I got it work again:
1. Rolled back WMP to WMP9, updated it to WMP0.
2. Removed ZEN Media Explorer and Jukebox driver (all Creative stuff) from Add/Remove programs in Control Panel.
It didn't solve the problem. I also tried my player with couple of other computers, but it didn't help either.
3. Installed Win XP SP3 -update.
4. Reinstalled driver for ZEN Micro in Control Panel.
5. Ran the firmware updater and this time it did recognize the player.
(6. Updated WMP back to version and the player's still working.)
Hope this will help you too.I can start the upgrading process, but at around 95% it stops, and says "firmware upgrade failed." I didn't uninstall WMP though, because I have Vista, and I hae no idea how to do it. I can only get my computer to recognize my 6G Zen when I go into recovery mode and choose 'reload firmware' then I connect it to the computer and I can start trying to upgrade it. If I dont go into recovery mode, its just a blank screen, the computer doesnt recognize it, and I can't even turn it off without reseting.
?I've tried so much, now when I try to upgrade, it loads a little bit and jumos to the end quckly and says "firmware upgrade fails" and nothing works. Do I have to try to do all the things you listed to fix this? -
Third party routers that need no firmware update
What are the best third party WiFi routers with LAN ethernet ports that need no firmware update to work with 10.4.8 and Windows XP?
Actually the extra ethernet ports is paramount.
Otherwise you don't know who is being secure to
whom. You end up having two routers to setup for
configuration of security. Simplicity is
important, since I want to be able to help set it up
for the friend, and forget it.
?? That doesn't make any sense - I think you're missing something fundemental here. The extra ethernet ports are on the LAN side of the secure connection. The firewall in the router isolates the internal, LAN network (wireless + ethernet) from the external WAN (aka the big bad internet). Whether or not you have a switch attached to one of the LAN ports makes no difference, security-wise - you are in control of the devices connected to the LAN side of the router. WEP/WPA/WPA2 security controls who is able to connect to the wireless LAN.
From a security standpoint, there is ABSOLUTELY no difference between buying a router with eight lan ports and buying a router with four lan ports plus plugging in a five-port switch to one of the lan ports. It's exactly the same thing.
What you don't control is the WAN side of things - the internet itself. You certainly wouldn't want to connect the switch to the WAN port on the router, at least not unless you wanted to run, say, a web server that is exposed to the internet itself. This wouldn't be a good idea in any case - there are better ways to set this up as well (either by setting up a DMZ, or by setting up port forwards)
There is absolutely no reason why you would want or need two routers for this setup - this is only an issue for extremely large networks.
The WRT54G has 1 WAN port and four LAN ports. You can have four hardwired devices (computers, printers, switches, etc) on these LAN ports - they are protected from the internet by the firewall in the router. You can also have any number of wireless devices on this same router; these, as well, are on the LAN side of the router, and are therefore protected.
Adding a switch to the LAN side of the router has absolutely no impact on security. No additional routers would be required. -
After installing an SSD into my optical bay, I've found out I need EFI Firmware Update 2.2. I can only find 2.3 which is not supported on my Mac. What can I do?
You do not want EFI 2.2, it bricked many 2011 MacBook Pro machines.
EFI 2.3 is the fix. Software Update should install it if you need it, but it goes to the boot drive as that's where the hidden EFI resides.
Check out this link of machines and their EFI versions
https://support.apple.com/kb/HT1237
Also if your SSD should be in the hard drive bay as it makes a better boot/applicaitions drive, not a good storage drive as it wears out with repeated use and is not "scrubbable" like a regular hard drive
The hard drive should be in the optical bay and used as a storage drive, you have things all messed up inside your machine, Apple doesn't support or expect the optical drive to be used as such to begin with, then as a boot drive is just asking for trouble. So use the optical bay as storage and not as a boot bay.
Also you can't install OS X or Windows or use a Firmware restore disk because it only works from a internal optical drive, which you have removed.
https://support.apple.com/kb/HT2213
You need to learn all about cloning etc., as you have no other means to boot the machine.
https://discussions.apple.com/message/16276201#16276201 -
Hi,
I need to generate a clock with a period of 20 micro seconds, duty cycle of
approx 20% and a data line as well as an address line all linked to the clock
pulse.
I have tried many different solutions, all using the Daq PCI-1200 but nothing
seems to work correctly. Usually the system bombs and I have to do a manual
reset to over come the problem.
Any suggestions?
KenHallo, Ken,
Du meintest am 20.02.00 zum Thema Need help with daq problem:
> I need to generate a clock with a period of 20 micro seconds, duty
> cycle of approx 20% and a data line as well as an address line all
> linked to the clock pulse.
You'll need an external clock, expecially under Windows.
Windows ticks with appr. 18 Hz, and the CPU tick isn't always available
when Windows tasks multi.
Viele Gruesse!
Helmut -
When trying to install Pro Tools 10.3.3 Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.
Thanks Linc for responding to my post. I searched a little further and found I was missing a file. Once I downloaded the fix, I was able to install the software from the original download.
-
HT201541 I need help with updating my browser.
I need help with updating my browser. Its telling me that Safari is outdated.
That is a very old version belonging to Snow Leopard. I take it you are not actually running Yosemite.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks/Yosemite- System Requirements
Macs that can be upgraded to OS X Yosemite
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
HT4623 I need help ASAP updating my jailbroken iPod touch 4th generation
I have a 4th generation iPod that's jailbroke by Cydia, I need help to update it to IOS 6. From my ipod
You can't, over-the-air update did not become available until iOS 5, you show iOS 4.1.
And we cannot discuss jailbroken devices here per the moderators. -
Please i need help i updated my iphone 3gs and now its not activating
i need help i updated my iphone 3gs and now its not activating
What happens when you try to activate the iPhone?
If there is an error message, what is the exact wording of that message? -
Need help with getResource() problem under weblogic 6.1
Hey all,
I've got a serious problem that I can't figure out. This should be really
simple - but it's alluding me. I have an ear file with a number of servlets
inside it. This ear file also contains a resource that my servlets want to
read from. This resource is located (within the ear file) at:
"/content/structure/a.txt". The file contains raw ascii.
To have my serlvet read from this file, I thought it would be as simple as:
URL content =
servlet.getServletContext().getResource("/content/structure/a.txt");
// pw is an instance of PrintWriter
pw.print(content.getContent());
However, when I execute the above I get the following exception:
java.lang.NullPointerException
at
java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
at java.net.URLConnection.getContentHandler(URLConnection.java:979)
at java.net.URLConnection.getContent(URLConnection.java:581)
OK, so fine - I figure that I'm new to this. The documentation for the URL
class tells me there is another way around this. It says that rather then
calling getContent() directly, I can open a stream on the URL and read from
that, like so:
URL content =
servlet.getServletContext().getResource("/content/structure/scenario2resourc
es.txt");
FileInputStream fis = content.openStream();
but when I do this I get the following different exception:
java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
at Utility.writeFileToOutput(Utility.java:134)^M
Apparently this thing is trying to return a web-logic-specific stream (which
is incompatible with an FileInputStream) - which I don't want to use or
learn about since I want my stuff to work under other webservers.
Can anyone tell me what I'm doing wrong? This should be simple.
-john
John Hilgedick
WisdomTools, Inc.
[email protected]
Wenjin,
I appreciate your response. I tried treating it as a normal InputStream -
but it didn't make any difference. Here's what I did:
URL content =
servlet.getServletContext().getResource("/content/structure/scenario2resourc
es.txt");
InputStream is = (InputStream)content.getContent();
And here's the exception:
java.lang.NullPointerException^M
at
java.net.URLConnection.stripOffParameters(URLConnection.java:1011)^M
at
java.net.URLConnection.getContentHandler(URLConnection.java:979)^M
at java.net.URLConnection.getContent(URLConnection.java:554)^M
at java.net.URL.getContent(URL.java:807)^M
at Utility.writeFileToOutput(Utility.java:134)^M
You can see that it is definitely breaking somewhere in getContent().
If you have any other ideas, I'd appreciate hearing about them.
-john
----- Original Message -----
From: "Wenjin Zhang" <[email protected]>
Newsgroups: weblogic.developer.interest.servlet
Sent: Wednesday, November 20, 2002 5:03 PM
Subject: Re: Need help with getResource() problem under weblogic 6.1
>
> The "/" in getServletContext().getResource("/content/structure/a.txt")
means the
> web (WAR) application root, not your EAR root.
>
> The ClassCastException is because that content.openStream() is not
FileInputStream
> and has nothing to do with Weblogic. You should treat it as normal
InputStream.
>
>
> "John Hilgedick" <[email protected]> wrote:
> >Hey all,
> >
> >I've got a serious problem that I can't figure out. This should be
really
> >simple - but it's alluding me. I have an ear file with a number of
servlets
> >inside it. This ear file also contains a resource that my servlets want
> >to
> >read from. This resource is located (within the ear file) at:
> >"/content/structure/a.txt". The file contains raw ascii.
> >
> >To have my serlvet read from this file, I thought it would be as simple
> >as:
> >
> >URL content =
> >servlet.getServletContext().getResource("/content/structure/a.txt");
> >// pw is an instance of PrintWriter
> >pw.print(content.getContent());
> >
> >However, when I execute the above I get the following exception:
> >
> >java.lang.NullPointerException
> > at
> >java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
> > at
java.net.URLConnection.getContentHandler(URLConnection.java:979)
> > at java.net.URLConnection.getContent(URLConnection.java:581)
> >
> >OK, so fine - I figure that I'm new to this. The documentation for the
> >URL
> >class tells me there is another way around this. It says that rather
> >then
> >calling getContent() directly, I can open a stream on the URL and read
> >from
> >that, like so:
> >
> >URL content =
>
>servlet.getServletContext().getResource("/content/structure/scenario2resour
c
> >es.txt");
> >FileInputStream fis = content.openStream();
> >
> >but when I do this I get the following different exception:
> >
> >java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
> > at Utility.writeFileToOutput(Utility.java:134)^M
> >
> >Apparently this thing is trying to return a web-logic-specific stream
> >(which
> >is incompatible with an FileInputStream) - which I don't want to use
> >or
> >learn about since I want my stuff to work under other webservers.
> >
> >Can anyone tell me what I'm doing wrong? This should be simple.
> >
> >-john
> >
> >
> >--
> >John Hilgedick
> >WisdomTools, Inc.
> >[email protected]
> >
> >
>
-
Need help for Update and cancel SalesOrder
Hi All,
I written java code for create sales order based on salesquotation,now i want to update and cancel sales order ,i need help to update and cancel salesorder.
can give any related links for update and cancel salesorder.
Thanks and Regards,
SrinivasHi srinivas.L
It is simple, here is some sample code. You must use getbykey to get the document. Then once you got it you can make whatever changes you need. Then update it. where i have oOrder.Update() you can have oOrder.cancel
Dim oOrder As SAPbobsCOM.Documents
oOrder = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
If oOrder.GetByKey(530) Then
oOrder.Lines.SetCurrentLine(1)
oOrder.Lines.WarehouseCode = "01"
If oOrder.Update() <> 0 Then
MsgBox(oCompany.GetLastErrorDescription)
End If
Else
MsgBox("Nothing found")
End If
Hope this helps -
Need help Firmware 6.0.2 updated yesterday draining
Need help updated Firmware to 6.0.2 crazy mad battery draining. This phone even switch to airplane mode the last three hours still drained about 30% battery life what is going on apple please sort this problem out.
Mines drains over 40% in two hours this is terrible I hardly even use it at all.
Maybe you are looking for
-
ITEM LEVEL CONTROL IN SALES ORDER
Dear All, In a sales order if I have 5 line items,usualy if the stock is not there for first two line items, in delivery it will start with 3rd line item...Is there any control in item level where I can keep first line item as mandatory ,then only i
-
IMovie continuously quitting unexpectedly whenever try to open video in full-screen mode
Hi this is what is continuosly popping up. Any ideas? Process: iMovie [723] Path: /Applications/iMovie.app/Contents/MacOS/iMovie Identifier: com.apple.iMovie8 Version: 8.0.6 (821) Build Info: iMovieApp-8210000~16
-
AFTER HITTING START, PROGRAMS, ACCESSORIES, SYSTEM TOOLS, THERE IS NO DEFRAG BUTTON. THERE ARE OTHER PO==O NO DEFRAG BUTTON, WHERE ELSE COULD IT BE? WENT TO START, PROGRAMS, ACCESSORIES, SYSTEM TOOLS. THERE ARE OTHER OPTIONS BUT NONE HAVE TO DO WITH
-
SCOM 2012 -Monitor successful log on with SQL User id
Hi Guys, i have been ask to create a Monitor that can monitor successfully /fail login for a specific user id listed under "Logins", can some one please help me with this task , i can create a Monitor for Windows Event ID , but not sure if for SQL L
-
Error While executing Set command
Hi All, When I run the following command SET -A LOOKUP_ALL "XX/CAE_MAILING_LIST_1017_TIME_ATN", it gives me error: -bash: SET: command not found Please let me know what to do. Thanks J